Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #65535 next resume »»
CONTACT INFORMATION:
View contact information...

PROFESSIONAL EXPERIENCE

Name of Company: CHRISTIAN INTERNATIONAL Ltd.
Address: P.O Box 84049 Tripoli, Libya
Position: RIG MECHANIC
Length of Service: February 17, 2000 - Present

WORK DESCRIPTION
* Overhauling of engine transmission, hydraulic pump, and hydraulic motors.
* Rebuilt differentials, transfer case, starter motors, and alternator.
* Perform Rig preventive maintenance.
* Fabricate hydraulic hoses.
* General repair of mud pump, power swivel, and Rig.
* Perform engine tune up.

Name of Company: SAUDI ARAMCO
Address: Dhahran, Saudi Arabia
Position: HEAVY EQUIPMENT AND ENGINE SPECIALIST
Length of Service: September 25, 1979 – June 1, 1994

WORK DESCRIPTION
* Overhauling of various types of engine, automatic transmission, hydraulic pumps, motors, hydraulic control valves, and hydraulic cylinders.
* Perform engine trouble shooting.
* General repair and reconditioning of engine drive air compressor, mud pump, generator, Crane, Loader, Dozer, Rig Equipment, and Fire Water pump.

Name of Company: ABOMEMCO EQUIPMENT CORP.
Address: Pasong Tamo Ext. Makati City, Philippines
Position: HEAVY EQUIPMENT MECHANIC 1
Length of Service: December 27, 1978 – September 14, 1979

WORK DESCRIPTION
* General repair and reconditioning of construction equipments.
* Overhauling of engine and automatic transmission.
* Rebuilt and overhauling of hydraulic motors and valves.
* Perform engine troubleshooting, engine tune up, and field maintenance.

Name of Company: PHILIPPINE INFRA-STRUCTURE INC.
Address: Talon Las Pinas, Metro Manila, Philippines
Position: HEAVY EQUIPMENT MECHANIC
Length of Service: September 16, 1975 – December 15, 1978

WORK DESCRIPTION
* Overhauling of engine.
* Rebuilt and overhauling of air compressor.
* Conduct field maintenance, engine troubleshooting, engine tune-up.
* Conduct field Auto Electrician.
* General repair and reconditioning of construction equipments.

Name of Company: PILAR DEVELOPMENT CORPORATION
Address: Intramuros B.F. Bldg. Metro Manila, Philippines
Position: HEAVY EQUIPMENT MECHANIC

WORK DESCRIPTION
* General repair and conditioning of construction equipments.
* Overhauling of engines.
* Rebuilt starter motor, alternator, transmission, and differentials.

EDUCATIONAL ATTAINMENT

COLLEGE:
UNIVERSITY OF THE EAST Manila, Philippines
Bachelor of Arts major in Political Science
1970 – 1972

TECHNICAL COURSE:
A. RODRIGUEZ TECHNICAL INSTITUTE Manila, Philippines
Diesel Mechanic
1969 – 1970

SECONDARY:
DAET, CAMARINES NORTE HIGH SCHOOL Daet, Camarines Norte, Philippines
1966 - 1969

View contact information...
«« previous resume next resume »»
Search Results (Resumes 7751 to 7800 of 9777)Go to Search Parameters...
Brief Description
9 Years Mining experience, Overhead Crane Operator, Driver, Entry Level Job Seeker
Sr. PDS Piping Designer, Chemical, Petrochemical, Slurry esperience. Very strong in ALL elements of PDS including administration and support.
Knowledge of engineering theories and practices and an understanding of environmental principles involves with exploration, drilling, production and development operations.
Completion - Well Testing supv, Wireline logging engineer
Good understanding of power/load calculation, drawing of wiring diagram, trouble shooting, installation of electric motor, contactor circuit, transformator and PLC
I am looking for a full time position within the oil and gas industry preferably as I am studying land administration in school.
10+ years expereince in accounting, tax, audit. Expert in implementing MYOB Accounting
Graduate Civil Engineer with 13 years of experience in construction and Readymix concrete
Comfortable to work as Research Executive, System Analyst, Training Coordinator, Admin Officer
I am a safety practitioner with wide experience in construction, mining, dredging and marine, onshore drilling, etc. I have a good knowledge in MS Word, MS Excel and MS Powerpoint.
I have 12 years experience with working as a Diesel Fitter Mechanic, I am completly confident with working indepently or as part of a team. I have a certificate in HV mechanical & Electronic Systems, Maintenance and Repair.
Millwright/Industrial mechanic and industrial construction mauntenance mechanic
Materialsman/Coordinator with 10 year experiance of oil field, Supply base, Offshore Rig and Land Rigs
Procurement / Logistic Supply Chain Consultant
Professional 15 years experience in geotech and geology with engineering consultancy and construction company with various responsible position.
Power Transmission Line & Lighting of Highways, Electrical Design & Low Voltage, Electromagnetic Field
17 years safety experience, Grad Dip OHM, MSIA, (RSP Australia), Trainer
Piping designer
industrial instrument mechanic/building automation
Production Accounting, Process Optimization and Monitoring
19 years in Oil and Petrochemical with Project Management, Commissioning and Maintenance/Reliability background as well as all associated mechanical equipment and safety system. BS in ME and MS in Engineering Science. in English and Mandarin.
Seeking Managerial or Supervisory position in Logistics & Transportation.
An experienced Rig Mechanic with high level knowledge on Mining industry
Experience in Automation Systems (Triconex Safety Control Systems, Honeywell FSC). Bachelor of Telecom/Control Systems Engineering. Experience in GCC countries. Currently working as an Application Engineer
23 Years of Various field of accounting
Director
I would like to apply for Engineer or any kind position which is suitable with my education background and experience. I graduated from Trisakti University majoring in Mechanical Engineering with GPA: 2.80 (scale of 4.00) in 1998. I offer skills through formal education and experiences.
Analytical skills to improve methods and procedures applying ESP and Gas Lift systems to develop exploratory well completions, workover jobs, water control, and general oil field operations. Knowledge of modern well construction (completions) operations and techniques.
I am mechanical engineer graduated in 1997 in Simon Bolivar University, Venezuela. I have five years experience in drilling operations. I have experience in HPHT, directional, high angle, exploration, onshore and offshore wells.
An Engineer working at Alcatel Egypt, S.A.E. MND division. Looking forward to change my carrier from telecommunication to Petroleum/ Gas/ oil. I am very energetic, willing to learn and have a very good team spirit. I love challenge and can work in any working environment and conditions.
I am a young man who has worked hard all and received little for his efforts, and what I have received is gone. I am looking for a new start in a new line of work that is more profitable than those jobs I have had in the past.
Radio telecommunications operator based in Amman/Jordan , have various work experience in coastal radio stations, on ships board, united nations . total experience over 5-years . Looking for good opportunity in oil/gas offshore, onshore projects : world-wide as RADIO OPERATOR
Shift Supervisor Shift Foreman Plant Operator
working in French company named Air liquide as a manager sales & customer support since 1998. This company is in the industrial gases . I am searching job in the same field. Any Cryogenic Company Interested Please call me.
„« More than 11 years of professional working experience in an Oil/Gas, Petrochemical, & Electro-Mechanical Construction Industry; experienced in development implementation, quality, supervisions and inspections.
B.S. in Mechanical Engineering, 14 years of experience from inception to completion of HVAC design and construction in commercial building (high-rise, shopping mall), pharmaceutical, laboratories, clean room, and hospitals.
Electric connection, changing bolt in the diaphragm in turbena source of the electric energy
I have been working in the Safety, Health and Environmental (SHE) field for more than 9 years. Throughout these years I have been exposed to various SHE related requirements and problems. One of my key competency area will be managing workplace day-to-day safety, health and environment issues and
b.e(industrial electronics),skills are worked on siemens/abb plc,ac & dc drives,troubleshooting ,hydraullic know how,pneumatic know howsiemens drive,lenze drive,ac & d motors and their controlling,worked over software like cmms,icam,matlab,autocad,orcad,software used in equipment/machineries.
Installation, maintenance and repair of medical equipments
Self motivating person,Hard worker,Always ready to work
NACE-USA Certified Senior Corrosion Technologist & MICorr grading from Institute of Corrosion-UK, having 19years work experience in Cathodic Protection Technology Services & Corrosion Control Services is available for employment.
A proactive and experienced individual with excellent Turnover and Acceptance Coordinator, Senior Document Control, HSE coordinator and Basic Life Support coordinator skills in various sectors like Oil & Gas sector, Petrochemical, Desalination Water & Power Plant Sector.
Operation Manager, International Pipe Inspector by DS-1, (Level II UT, RT, MT & PT) - ASNT-TC-1A
MSc Engineering / Business Development / Project Management /Energy fielsd
Control Systems Engineer (Programmer & Designer)
i have three month experience in the oil field and one year experience on the mining field as a junior geologist. my duties are core logging,sampling, underground mapping and data acquisition,and Running/Monitoring (data collection) and processing of crude oil to the surface.
Geological engineer with one year experience in RC, Rab and Auger sampling and logging coupled with knowledge in MapInfo and introduction to Surpac
graduated in mechanical engineering, Proficient in Autocad, Trained on HVAC systems of Indian Institute of management, Worked as maintanence engineer in The Western India Plywoods, India, Worked as a software engineeer in Cognizant technology solutions,
on/offshore seismic data acquisition.Field seismic QC.Seismic recording: SN 388.DESIGN 3D Layout.and NAVIPAC as navigator.Deployment/recovery of seismic devices.Trouble shooting and attend to work shop.
First   Prev   151   152   153   154   155   [ 156 ]   157   158   159   160   161   162   163   164   165   166   167   168   169   170   171   172   173   174   175   176   177   178   179   180   181   182   183   184   185   186   187   188   189   190   191   192   193   194   195   196   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com