Resume - ·ICCP Design and Installation Principles · Quality Control

Misco Jobs

Resume #65573

CONTACT INFORMATION:
View contact information...

PROFESSIONAL TRAINING
1996-2004: Participated in the project of "Initial-Take-Off (Commissioning) of the Cathodic Protection System of a Natural Gas Pipeline" of The Public Gas cooperation of Greece (DEPA). This 3-Phase programme was aimed at determining all the parameters necessary for the proper functioning of the Cathodic Protection System of the Pipeline.The second phase was to certify the proper and effective functioning of the system. The third phase was aimed to see that the system after some years of operation certifies the criteria for effective protection of the system.My candidacy on corrosion and protection of Underground steel structures as of the time offered me the advantage of participation as a research scientist.The thesis programme and the exhaustive laboratory experiments aimed at understanding the theories of corrosion phenomena and the means of controlling them provided the fundamental theoretical backgrounds on which the field practices were fully understood.These years of field practice and the experience gained therein, provided me with full technical and field know-how necessary for a Cathodic Protection Engineer (Impressed Current, Bimetallic and-Sacrificial) leading to commissioning and/or Pipeline Integrity Management engineer.Understanding the level of professionalism and communication required for long-term success in the field of control of pipeline corrosion and corrosion control in general, I am confident that a combination of field experience and solid educational background has prepared me for making an immediate contribution to any Organization where corrosion and its protection is of major concern.

ADDITIONAL TRAINING
T.E.K.E.K., NEA IONIAS (400 Hrs): Technical Centre for Professional AcquisitionIEKEM-TEE: (400 Hrs): Pan-Hellenic Association of Chemical Engineers Quality Control of Structural Material; Concrete Steel Rebar Structuring; Structural Steel modifications in Concrete and ISO Systems and Control MethodologiesEnvironmental Management System; Greek & European Environmental Law; EMS Basic Principles & Procedures; EMAS and ISO 14001

RESEARCH INTEREST
* Risk Based Maintenance and Corrosion Inspection Programs
* Root Cause Failure Analysis and Incident Investigation
* Environmental Management System

EMPLOYMENT HISTORY
1996 -2008 N.T.U. Athens Research Scientist
.Full Field Survey and Monitoring of a Cathodic Protection System of a Natural Gas Pipeline under the supervision of Assistant Professor G. Batis of the Department of Material Science and Technology.This survey includes Pipe/soil potentials, Conductive voltages, Insulation resistances, and T/R Cabinet parameters, On/Off potentials, Potentials of crossing pipes or other metals, Protection Currents and voltages and others.
1994 -1996 3E. Bottling comp. Athens Quality Control Officer
I worked as a quality control officer in the laboratory of the company, engaging in product analysis and effluent treatment procedures for the wastewater from the production line.Late,r I was asked to investigate the causes and rates of Machine Failures in the Production Line and to suggest ways of improving the situation. There was an increasing rate of machine failures as of the period. Machine Failure Analysis Survey was carried out throughout the production area. The results of the survey showed that failures were due to stress and fatigue cracking and a modernization and automation of the production line was suggested.
1990 - 1992 NEOKEM S.A. Assistant Production Officer
Employed as a chemical engineer in the company, I was to introduce innovative ideas of improving the company's products mostly in the areas that involve their protective properties to corrosion and fouling such that the liquid paint could find its application to industrial uses. My innovative ideas and the ease I had in coming to new market products encouraged the owner of going to establish in Nigeria. This effort was brought to a holt by the so-called 419 that plagued Nigeria and the entire world at that period.Later I became in charge of its powder production unit where due to extensive research; the company was able to establish its own brands that almost dominated the Greek market outside the Italian brand that was known then in the market. At the end of 1992, I decided to further my studies in the area of corrosion but my contribution to this small company, (then), could be seen today as it has become a major powder paint manufacturer in Greece.
1989 - 1990 NEOPLASTICS S.A. Assistant Sales Officer
This small-scale factory engaged me in the sales department assisting the sales manager and my main work was travelling to pre-programmed appointments to present and promote the factory's products.This did not last too long for as soon as I got the chance of working with the paint company I left.
SKILLS
* ICCP Design and Installation Principles * Quality Control – Pipeline Integrity Management* Data Management; * Protective Coating Manufacturing Technology* Electrical Installation.

PUBLICATIONS
* Concrete Rebar Corrosion: Anti-corrosion Methods and Material Journal, (to be released0* Concrete Rebar Corrosion: University of Patras, Dichronica 2003* Measurement Guides of a CP System on H/M Pressure NG Pipeline, NTUA Press, Athens, 1999

ADDITIONAL INFORMATION
* Member: Technical chamber of Greece (TEE) since 1994* Held Federal republic of Nigeria scholarship to Italy* Held AUTH (Thessaloniki) Scholarship to my masters degree* Held Leventis Foundation scholarship four years of my doctorate thesis program* Patron: Ibo Community, Thessaloniki 1989* Former Treasurer: Nigerian Student Union, Thessaloniki 1984-87* Head Technology Section: Nigerians in Diaspora (NIDOE), Greece2001

SPECIAL KNOWLEDGE
Software: Computer Literacy
Languages: English, Greek, and Nigerian

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1651 to 1700 of 9906)

Go to Search Parameters...

Brief Description

I have 33 years experience in design/construction project management on Petro-chemical Projects which include upstream oil and gas, refinery projects and chemical projects. I have managed both green-field and brown-field projects on schedule and within agreed budgets.

I have been working at Mudlogging Operation more than 15 years. And have responsibility as:

Qualified like Mettalurgical Engineer, specialty Metallurgical Processing, Internal Auditor for Quality Systems in accordance with ISO 9000 series, Computers abillities..

expertise in Supply chain Management.Inventory planning,Procurement,Sourcing,Materials management.vendor negotiation & development

QUALIFICATIONS: Twenty plus years of accomplishments involving vertical and horizontal drilling, equipment development, and employee supervision. All achieved through on-going education, technical competence, ingenuity, perception, and analytical ability.

Instrument /control engineer

Natural gas and oil plant operator

Free! Skills and Qualifications: 20+ years in the Oil & Gas Industry, Presently working as Operations Supt. in Kuwait, my goal is to move out of the Drilling Company side and into Production

Experienced HDD Engineer

Looking for work as a Drilling Supervisor

To obtain a job in the in the Oil and Gas Industry that will challenge my abilities.

I have over 25 years of experience in the petroleum industry, primarily focused in drilling operations and engineering. My diversity includes US domestic and international experience offshore and onshore. I am seeking any challenging opportunities to further my career.

I have worked in the Quality Assurance Division and Health, Safety, Environment & Quality (HSECQ) departments where my knowledge and expertise in field of HSECQ was enhanced.

Petroleum Engineer with 9 years of experience in gas and petroleum reservoirs

Petrophysicist,, Open hole and Cased hole experience, LWD experince with Baker Hughes Inteq

9 yrs Exp. Document Controller

Over 12 years of rich and extensive experience in Oil and Gas, Refinery and Petrochemical and currently serving at PETROFAC INT LTD. Kuwait in KUWAIT OIL COMPANY.

Ability to manage multi projects and organize all procedures on and off sites to ensure the projects are completed on time and within the budget.

I have over 15 years experience working as Maintenance Planner in the Petroleum industry using Maximo and other computerized maintenance system

I have 17 years valuable experience: 6 years I was working in the gulf of suiz petroleum co. in Egypt. 11 years I was and still working in Abu Dhabi water and electricity authority in UAE.

·ICCP Design and Installation Principles · Quality Control – Pipeline Integrity Management, Data Management; Protective Coating Manufacturing Technology

I am an Engineering graduate with 13 years of operational as well as commissioning experience.currently working with Qatar LNG plant

Purchasing, sales, marketing and international trade management

Knowledgeable in SAP R/3 MM Module and have over 13 years of experience in a petrochemical company in Saudi Arabia and Kuwait.

+13 yrs exp in Well site geologist , Data Engineer

cnc machinist, edm die sinker, wirecut operator

i have nineteen years more in Cad Drafting Mechanical and Electrical Drawing

Senior Project Manager with 7 years experience in the Media Broadcast Industry. Masters Cert in Project Management in 2007. IT Engineering & Software project background.

•Over 7 years experience as a well logging Geologist in NORTH SEA, AFRICA, and the MIDDLE EAST with a major Oil and Gas Exploration Company in the Oil Industry. And also 3 years experience as a Field Geologist.

Over 14 years of experience in wide range of core refinery operations like pre-commissioning, commissioning, operating ,optimisation, handling start up and shut downs etc of various process plants like FCCU ,SRU, Naptha HDS, CRU ,CO Boilers/ Meroxes/ N2 /benzene/toluene/Hexane extraction plants

Planning Engineer with a degree in Mechanical Engineering. Skilled in carrying out Daily Maintenance Planning & Plant Turnaround Planning. Expertise in using SAP PM & MM Modules. Conversant with Computerised Maintenance Management Systems. Hands-on experience in preparing MS Project Schedules.

Electrical Engineer with more than fourteen years’ experience in the filed of design, testing & commissioning and maintenance of substations up to 220kV; study, analysis, modifications, testing and trouble shooting of protection systems; power system analysis including IPP interconnections/impact

I have around 20 years oil and gas field experience,out of which about 5 years are in offshore.Presently I am working in an FPSO,in Mauritania,W.Africa.

HND MEASUREMENT &CONTROL ENGINEERING

Project Services/ Project Controls

CONSTRUCTION PROJECT MANAGEMENT: Managing all construction projects. Estimating time and material costs. Maintaining quality and cost control. Conducting weekly safety meetings.

Good knowledge of international QHSE regulations and standards as well as oil and gas operations and business.

Over 15 years oil industry experience with an unusually broad-ranging geological/petrophysical background. Proven ability to work efficiently as part of a small team due to well-developed technical and organisational skills. At ease with tasks requiring personal responsibility for attaining high sta

Field Instrument Engineer with a total of 19 years related experience with specialist knowledge of Control Valves. Qualified to Higher National Diploma level ( Mechanical Engineering , 1985 ).

More than 13 years of multi-international reservoir engineering experiences in gas and oil developments from sandstone and carbonate in land fields and offshore,including different stages of appraisal and development planning & management, well test, reservoir characterization & simulation, economic

Over 16 years experience (covering all aspects of onshore and offshore E&P business)

A Petroleum Engineering professional with sixteen years of diversified E&P experience in onshore environments with an Indian national oil company, Oil India Limited and Cairn-Energy India Pty. Ltd (incorporated in Autralia)

Degree on Industrial Engineering. More than 15 years intensive involvement in Oil and Gas Industry (the last 9 years in supervisory level). Received various assignments such as Gas Plant Operator, Board Operator, Metering Technician, Field Engineer, Mechanic Supervisor and Offshore Supervisor.

16+ years working experience with major E&P companies in North Africa & SE Asia. Have extensive experience in supervising and implementation of reservoir management strategies, predict performance and optimize future depletion and field development planning.

I have commitment to safety, exceptional service and continuous improvement.

I Have over 20 yrs clerical-administrative-accounting experience

Mud engineer - 5 years. drilling engineer - 2years, drilling supervisor - 3years

11 plus years combined work experience mainly 8 plus years in the field of Project Controls related to Design Engineering and Construction of Petrochemical Plant. In project controls, work in various positions as planner/scheduler, cost engineer and document controller.

Radio Operator/Offshore Logistic Planner/Heli-admin

Petroleum Engineer looking for drilling or production work. 20+ years experience. Worked SE Asia, LA Gulf Coast, FSU, Saudi Arabia and Venezuela. Experience covers on site and office engineering in drilling and production.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 [ 34 ] 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out