Resume - Field Engineer for Schlumberger graduated from Sultan Qaboss University with bac...

Misco Jobs

Resume #65801

CONTACT INFORMATION:
View contact information...

Education:

PRIMARY & SECONDARY SCHOOLING

* Primary school: (1989-1998), Al Muthana Bin Haritha Primary School, Muscat, Sultanate of Oman.

* High school: (1998-2001), Haafs Bin Rashid Secondary School, Muscat, Sultanate of Oman.

* High school graduating mark: 97.5%

UNIVERSITY EDUCATION

* B.Eng: Electrical / Electronics Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman.

* Specialization: Communication Engineering.

Certificates Received:

* CISCO Certified Network Associate (CCNA) 1: Networking Basics
* CCNA 1 Networking Basics Recommendation Letter
* CISCO Certified Network Associate (CCNA) 2: Routers & Routing Basics.
* CCNA 2 Routers & Routing Basics Recommendation Letter
* CISCO Certified Network Associate (CCNA) 3: Switching Basics & Intermediate Routing.
* CISCO Certified Network Associate (CCNA) 4: WAN Technologies.
* IEEE-SQU Society Leader certificate
* Siemens Aktiengesellschaft certificate
* IEEE international membership

Final Year Project:

* Designing a Wireless GSM network for Salalah City & Investigation of Path Loss due to rain, humidity and thunderstorms using the PATHLOSS software and Matlab7.0.
o Grade Awarded: A
o Outcomes: Humidity effect on path loss was proven to be significant despite the world wide articles.
o Publications: European conference on antenna and propagation, 6-10 Nov 2006 (Nice France).

Mini-Projects:

* Design of Indian BCD-Seven-Segment Display.
* Design of Digital to Analog Converter (DAC).
* Design of Local Area Network (LAN) using Cisco switches and routers.
* Design of Sound to Light Converter.
* Design of a low noise amplifier (LNA).

Major Courses Taken:

* Electronics
* Analog and Digital Communications
* Fiber Optical Communications
* Electromagnetic
* Antenna & Wave Propagation
* Introduction to Business
* Introduction to Engineering (Drawing course)
* Engineering Management
* C programming
* MATLAB
* Computer Networks
* Linear Control Systems
* Advanced DSP

Work Experience:
* Currently working as a Field Engineer for Schlumberger Overseas, Sanaa Yemen since June 2007.
* Worked as a research assistant in the Telecommunication Research Center in Sultan Qaboos University, Sultanate of Oman from September 2006 to May 2007.
* Training as a computer technician in the National Research Corporation in Sudan. (From 1/8/2004 to 1/9/2004).
„Ï Duties: Network troubleshooting & Data Base management.
* Professional training at Siemens Aktiengesellschaft Muscat Branch for Information and Communication Networks (From 15/6/2005 to 27/7/2005).
„Ï Duties: Designing of microwave links, site visits, Acceptance Report, Equipments Configuration, Data Acquisition, Simulation using Tornado Software, Drive tests using TEMS software & GPS and Study of the GSM subsystems and their mechanisms.
* Information Technology Group (ITG) leader (spring 2005, fall 2005, spring 2006)
„Ï Duties: Sending articles about new technologies in the communication, computer and IT topics. Conducting lectures on software and workshops (Pspice, C-Programming, HyperTerminal... etc) for students in the university.
* Performed a short course on PSpice software for circuits simulation in SQU (spring 2005, fall 2005, spring2006)
* Performed a short course on using HyperTerminal Software to configure routers and switches for a LAN and WAN with CISCO routers, switches and cables (fall 2005, spring2006).

Skills and Abilities:
* Computer skills: Windows Operating Systems, Ms Office (Word, Excel, PowerPoint and FrontPage), Internet browsing, Programming and Software (Matlab, HyperTerminal, PSpice and C++).
* Configuration of CISCO routers and switches (VLANs, Routing Protocols [TCP/IP, BGP4, OSPF, RIP], Ethernet, IP configuration, ¡Ketc)
* Good Communication and analytical skills.
* Interactive adoption to different culture.
* Pressure Tolerance.
* Ability to work in flexible environment.
* Ability to work within a team.
* Took a course in First Aid.
* Valid Omani driving license.
* Valid International driving license.
Languages:

* Arabic: Mother Tongue.
* English: Fluent in reading, writing and speaking.
* French: Fair in reading, writing and speaking.

Hobbies and Interests:

* Sports: Football, Basketball, Volleyball, Table Tennis, Tennis, Snooker and squash.
* Music: Piano and Drums.
* Mathematical Theories.
* Browsing Internet.

References:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6751 to 6800 of 10903)

Go to Search Parameters...

Brief Description

multi ndt technician ASNT level II

Logging engineer

I experianced in piping jobs about six years. My qualification is only high scool. & i have passed some standard courses(details in the below resume) regarding piping & safety in singapore.

B.S. in Chemical Engineering with a good background in Chemical Process environment .

Process Engineer and B.Tech Chemical Engineer from IIT, India looking for a bright opportunity in Oil and Gas Sector

Field Engineer for Schlumberger graduated from Sultan Qaboss University with bachlore degree in Telecommunication and Signal processing

I am an HND graduate in Petroleum Engineering, got the ability to work in an environment where innovation, integrity, implementation and impact are necessary ingredients of success, ready to work with the team,with little or no supervision and perform task even under pressure.

Senior Civil Structural PDMS AutoCAD Designer

IT Specialist with emphasis on Project Management, Technical Services and International Project Coordination

Metallurgist, Welding Inspector, CSWIP Radiographic Interpreter Level 2, ASNT Ultrasonic Testing Level II

Administrative Officer cum Sales Coordinator

Working as a process engineer in reputed company, Finished the B, tech., (chemical engineering)

Hydrocarbons measurement specialist (crude oil)

A person with 5 years extensive experience in making Design Drawings and Working Drawings for both Mechanical and Civil fields using Auto CAD and Micro station.

Growth with Profit (Marketing, Operations, Sales & Business Development)

Master Mariner/ULCC/VLCC/FPSO/Marine Bulk Oil/Port Captain/Marine Superintendent/Company Representative/Marine-Project-Operations-Manager/Oil Terminal Manager

MBA, 100% Spanish and English.

Executive management, business development, supply chain, IT, embeded system

B.Sc (Hons) Accounting. Ability to learn and assimilate, Good team player with analytical mind, Ability to adapt in any given situation, Good communication and problem solving skills

PRO-ENGINEERING Designing Software,3D Solid Works Designing Software,MS office, Basics of C language.

But I have directed groups of technical people as well as managed a mexican project in monterrey.

Cswip 3.4U Underwater Inspection Engineer CV

Over (3) years practical experience in surface and underground mining environments. Experienced in short-range mine planning. Familiar with production scheduling and phase sequencing using Net Present Value (NPV) method. Proficient in relevant mine planning and geotechnical software.

Planning Engr. + primavera + MS Project + AutoCAD

Goal oriented professional with experience in corporate and agency recruiting, customer service, training & supervision. Proficient at handling multiple tasks simultaneously, problem solving & articulate with strong interpersonal skills.

Dedicated material control and procurement specialist for piping, electrical and structural materials in the energy, oil and gas industries. Proficient in timely requisitioning of inventory items with outstanding verbal and written communication skills.

Electronics Engineer with more than 10 years of combined experience Instrumentation and control, Electronics, Software, PLC, DCS working as Electrical and Instrumentation Engineer in an EPIC Project with proven abilities in Configuration, Calibration and testing, Pre-commissioning, Loop Checking

1. Petroleum Geology and Geophysics. 2. Knowledge of global Drilling Practices, equipment, and methodology, drilling Flude, Cementation, and Casing. Primary, Secondary and Enhance Oil Recovery Techniques. 3. Different kind of well logging. 4. Reservoir modeling. 5. Magnetic, Gravity and Seismic Surv

Qualified for Piping Stress Analysis Static and Dynamic knowledge with CAERSAR II Stress analysis software certification by COADE, ASME B31.3 Piping Process Standard knowledge, International codes & Standards such as ASME, ASTM, API, ANSI, DIN etc, Piping Engineering knowledge,

I finished Masters in chemical and process engineering in Otto-von-Guericke University, Magdeburg, Germany and I did Bachelors in Mechanical Production and Industrial Engineering in Andhra University, India. I am skilled to learn the new things easily and perfectly.

Stress analysed all of the critical piping systems in which are under critical conditions in onshore and offshore projects including PSV''s, piping connected to rotating/static equipments/1200 kW reciprocating compressors, piping subjected to tank settlements, bridge movements and etc.

B.Sc. (chemistry) 13+ years experiencei in oil/gas &petrochemicals plantoperation. Experience to work with contract resourses(USA), UOP(USA), planttech(india)COSDEN(USA) people in enert entry in vessels for catalyst replacement jobs. DCS /PLC experience, fire trainning, first aid trainning attended

Control Systems Engineer

Confident and experienced engineering professional.Skilled communicator and determined influencer. Computer literate.

Knowledge in Autocad 14, LT2000, 2002, 2004, Pipe Designer 3D.

I have a stable work history having spent four years working as a Mechanical Engineer within the Teyseer Group in Qatar. I have a broad range of experience including project management, site and field works, tender preparation, etc. On Sep 2004, I graduated as a Petroleum Engg (Masters Degree).

Over 15 years experience as a instrumentation & control engineer in oil/gas , petrochemical industries. For the past seven years , I have been also involved in SCADA system in detailed basic engineering, integrating, commissioning and maintenance.

I am candidate who has excellent research and development skills along with good manufacturing experience.

Dec 2002 Shift/ - Board Supervisor. Jan 2002 – Sept 2002. Shift Team Leader / Panel Trainer. June 2001 – Dec 2001 Start-up - / Shift Team Leader. Nov 1991 – June 2001 Panel Board Operator and Lead Operator.

Civil engineering graduate with 13-years of professional working experience as a Senior Document controller in gas and oil industry. A computer literate, familiar with EDMS, QVP and Plantdoc programs used in project documentation.

Profile Total of 6.5+ years of IT experience with 5.5+ years of SAP R/3 experience in ABAP Programming in the functional areas of MM, SD, PP, PM, FI & Payroll.

Proficient in physical and wet chemistry analyses using gravimetric, titrimetric, and spectrophotometric techniques. Computer Software knowledge in HYSYS,MAPLE, ASPEN, HP Chemstation, Microsoft Office, Microsoft NT.

Petroleum Engineer with 6+ years of experience in the Oil & Gas Industry. Specifically in Middle/Heavy Oil. Strong Knowledge in Production Asset Management, ESP and Gas lift Design and Operations, Horizontal and conventional wells, Cyclic Steam Injection and New Technologies for E&P Industry.

Certificates in H2S Alive, W.H.M.I.S., and class 5 airbrakes. Work history includes warehouse work, shipping and receiving, loading and unloading trucks, driving forklifts and pallet drivers, and customer service

Post Applied Document Controller

Main job is Seismic Processing Analyst The main Projects 2D, 3D (land &marine), AVO All Projects works include; pre-stack processing, post-stack Processing ,and migration(PSTM_some Projects) ,Velocity Analysis AND build modules , finalizing these projects by writing the processing reports

Geologist looking for employment in the Oil Industry

Training for Entry Position for Oil and Gas Industry (Floorman), Engineer Degree for Fisheries, Experience working for Major Projects and at the Sea, ourdoors and long hours

I am full confident about the any job of analyzer/instrumenation for detail see my resume

Good research aptitudes intellectual, potential and creativity.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 [ 136 ] 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out