Resume - Electrical Maintenance Engineer With over 30 years of experience in providing se...

Misco Jobs

Resume #66004

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
------------
To go beyond here and challenging the horizons of the Oil &
Gas industry in providing benchmark services.

To meet the need of your company that is looking for a Change & Improvement to happen through enthusiastic and ambitious people, with a flair for good communication and awesome attitude.

And at the same time, an amalgmation of core competence and experience in technology to assure reliable and prompt solutions.

With a passion to work and promise to self for career growth & to deserve the best, from a company that does its part to build better environment for the dynamic professionals.

WORK EXPERIENCE:
------------
Working as Chief Electrician in Jack-up Rigs with PLC controlled ACSCR system (Aban VI & Aban VII) owned by ABAN OFFSHORE LTD. (1Year)

Worked with Oil & Natural Gas Corp. Ltd (Oil major of India) in different capacities holding responsible positions for 26 years as mentioned below;

As Maintenance in-charge for Deep Drilling Land Rigs

Servicing of DC Motors & Generators
ACSCR Panel maintenance
DC-DC Panel maintenance
AC motors maintenance
AC Panel maintenance
Top-Drive maintenance

As Maintenance in-charge for Process Plants
Both Offshore & Onshore
Servicing of HT Motors
Turbine-Generators
HT AC Panel maintenance
Repair of HVAC Units
VFD Panel maintenance

As Engineer-in-charge
Execute projects including installation of new rigs.
Execute maintenance contracts
Execute electrical equipment Servicing contracts.
Procurement of electrical equipments
Vendor development
Inventory management

Worked in Training institute of ONGC Ltd (School Of Maintenance Practices, Baroda) as Training co-ordinator & Faculty for Switchgear maintenance and Electrical safety

Worked as maintenance engineer in Piston-Ring foundry of GOETZE (I) Ltd. (2years)

Worked as Apprentice engineer in Bhakra Power House (1year)

PROFESSIONAL EXPERIENCE

As Management professional for manpower and inventory control.
Organized maintenance team and supervised Inventory for repair & maintenance activities through material management systems ensuring consistent flow of material.

Performed the responsibility of inventory control, quality assurance and quality control. Administration of the computerised Maintenance Management System, repairs, certification and classification requirements.

As project engineer for installation and commissioning of new drilling rigs and various developmental works related to plant or rig through contracts following the works & contracts procedures.

Proactive leader with expertise to trouble-shoot, implement change and quality control while maintaining safe and productive environment.

As training coordinator for trainings on LV & HV switchgear, Oilfield equipments, DCS & PLC controls, electrical safety etc. Conducted trainings on HT Switchgear Maintenance and Electrical Safety in ONGC, Baroda (India) & GNPOC, Khartoum (Sudan)

EDUCATION & CERTIFICATION:
------------
Highest Education: B E (Electrical) 1976
Institution: Thapar Institute of Engineering,
Patiala -147001 (Punjab-INDIA)

ADDITIONAL INFORMATION:
------------
JOB PROFILE
Started my career as Apprentice engineer in Bhakra Power House (1977-78) and later joined Goetze (I) Ltd, Bahadurgarh (Patiala) as Electrical Engineer for its foundry & machine shop.(1978 to 1980) (3 Years)
Joined ONGC in August 1980 as Assistant Executive Engineer (Electrical) and risen to the position of Chief Engineer (Electrical). Obtained experience in different and difficult environments like Rajahmundry (AP), Assam, Mumbai (Offshore), Ankleshwar, Mehsana & Baroda. (26Years)
Joined as chief Electrician on Jack-up Rig Aban-VII (1Year)

TRAINING PROFILE
ACSCR Controls Hill Graham Controls, UK
Drilling Rigs IEIP, Ploesti, Romania
Flameproof Equipment CMRI, Dhanbad,
Oil Field Equipment BHEL, Hyderabad
HT Motors BHEL, Bhopal
HV Switchgear ABB, Baroda
HUET Survival Systems, Mumbai
STCW TS Rahman, Mumbai

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 10917)

Go to Search Parameters...

Brief Description

Experience in 8 years in Mechanical seal industry, 7 years in Diesel engines and 1 year in fabrication industry

Thirty-five years of detail design / checking in the petrochemical / refinery and fertilizer engineering field. Piping work includes preparing detail design drawings, punch list during construction, material take offs, labor cost estimates, manpower estimated, developing P&ID drawings.

A professional individual with a strong background in health, safety and environmental research and policy implementation. An extensive career with experience in rig-operations and positions ranging from Floorhand to Directional Driller with an emphasis on loyalty and confidentiality.

Having 18 years of work experience in Project Management / Constrcution / Fabrication

Qualified Hse Manager Wit Experience In Management Of Hse Aspects In Oil & Gas, Lng, Pipelines, Power Plants, Stp/Water Treatment Plante And Infrastructure. Worked In Most Of Critcal Oil / Gas Felds Like OMAN LNG, PDO (Oman); ADNOC, ADCO, ADGAS, ADMA-OPCO (Abu Dhabi). With Ph.D.In Management Of HSE

Instrumentation and control senior / lead engineer

Petroleum Engineer

As Specialist Professional Engineer (Training Engineer)/Mechanical Training Instructor supervisor grade C1, C2 in all aspects of Training and Development (coach and prepare learning materials, capacity and profile building, skill-transfer and counterpart training).

Prodigiously experienced and qualified Engineering Professional, with an enviable, global, 30-year background in the Oil & Gas Production and Processing (On-Shore and Off-Shore), Refining, Petrochemicals, Chemicals, Compression and Gas Turbines industries.

Highly experienced and successful management professional with a demonstrable record of accomplishment; currently seeking a challenging role, within a multi national environment. Offer a range of transferable skills within the areas of strategic management, business process re-engineering, etc

Foreign Exploration Country Manager, Oil Exploraton

Well completions & workovers. Sand control, stimulation. Domestic & international. Onshore & offshore.

Petroleum Engineer with postgraduate studies in System Engineer and Operations Research, over 20 year of experience, working in projects in Peru, Venezuela, Brazil and Argentina, in Offshore and Onshore areas. Involved in secondary, pressure maintenance and horizontal wells recovery projects.

Total 18yr of experience in Piping FEED, Design and Detailed Engineering, Having good expousure of 3D engineering software.

Seismic data processing /reservoir simulation software developer

19 years Experience in Instrument during construction, commissioning, start-up and Maintenance in many different Oil & Gas, Refinery and Petrochemical Projects

PDMS Administration

Civil/steel structure supervisor

Extensive experience on drilling as Wellsite Supervisor, Senior Well Engineer, Wells Superintendent

Project Management

Control Systems Specialist

17 years of post qualification experience in Detail Engineering of Pressure Vessels (Oversized & Shop Fabricated), Reactors, Separators, Drums, Columns, Spheres, Tanks (Storage & Low Pressure), Flare Stack, Vendor Packaged Equipments, Emergency Diesel Generator and Overhead Cranes

Instrument supervisor / foreman

Highly Experienced Well Site Supervisor.Underbalanced High Pressure HighTemp Deep Horizontals

Thirty years experience as a drilling supervisor for an major international operating company. I have an Associate degree in Petrouleum Technology. I am currently consulting in Oman on a land exploration well. I have over 20 years international experience.

Certified Production & Inventory Management professional

25+ years experience in electrical/control system design for the petrochemical industry. Additional three years experience in civil engineering. Experience has included electrical/instrumentation design to NFPA, NEC and ISA standards, field engineering, as well as managerial experience and CAD.

Drilling fluid superintendent / supervisor ( mud, cement, waste management)

I am a knowledgeable Mechanical/Piping Designer with Project Engineering experience, capable of increasing degrees of responsibility.

I have twenty five years of piping design, 10 years of project leading with in the piping group, shop fabrication & field construction c/w PDS & AutoPlant soft wear experience. I have US work experience & posses a valid Social Security card.

Offering more than Fourteen years of Experience in Marine, Offshore, Oil & Gas Industry with a wide variety of projects involved in Electrical & Instrumentation Disciplines. Acquire extensive knowledge in a broad range of Computer programs & other Various E & I Engineering Field

Expert in managing conglomerates and applying strategic planning and control instruments

Instrument / Controlsystems Engineer

Driller / Tool Pusher (Onshore / Offshore)

Geologist geophysicist interpretation

EPCM Project Contracts Interface (Client-EPCM-Subcontractors)

Emergency Management professional with 28+ years of combined experience; managing teams, providing technical expertise and leadership in programs, projects, operations, and training; in both Fire Services, Training Academy’s and the Petrochemical Industry

Electrical Maintenance Engineer With over 30 years of experience in providing services and solutions to electrical maintenance and Training & development etcin the engineering and Oil & gas industry.

To obtain a challenging position with an engineering firm where I can use my relevant skills and experienced as Interface Design Coordinator / AutoCAD Supervisor and be a contributing member in the growth of the company. Willing to work as a key player in challenges where I can put my committed atti

I am capable of achieving organisation¡¦s objectives and organic growth through effective contributions. I have over 13 years of experience in the areas of Health, Safety & Environment Management

Maintenance Supervisor/Security, Maintenance Supervisor/ I&C, Project Manager

20 years fire fighting experience.Now working in ADNOC Off Shore facility

Having 23 years of sound experience in piping and equipment design for Onshore / Offshore Oil and Gas, Petrochemical and Chemical Industries.

24 Years of experience in Piping/ Pipeline Design Engineering for Oil & Gas of Onshore and Offshore facilities.

Experienced land professional with a strong background in all phases of petroleum land management. Proven expertise in a variety of situations, as well as proven leadership skills as demonstrated in Land Manager positions with two companies and as an independent lease broker utilizing the services

Structure designer is make development basic design from engineer to make engineering drawing with make details, sections, connection types and discuss with other department like piping, civil, mechanical etc to make problem solve in engineering design or site.

Mechanical engineer for heat exchanger, package, boiler, fired heater, fabrication, HTRI, compress

25 years Petrochemical / Oil Process Operations Including 10+ years in Supervisory / Man Management positions Commissioning and Start-up Assignments (Overseas)

Team Leader Const/Maint. Oil/Gas Ind.Experienced in planning/execution of projects ,procedures , method statements , permit systems , progress rep. , reviewing change orders, QA/QC and HSE standards. Running multicultural workforces coordinating disciplines and subcontactors.

PhD in Mechanical Engineering with emphasis on Materials and Metallurgic Engineering. Special knowledge in Surface Technologies, especially Thermal Spraying. a German citizen with Permanent Resident Status in Canada.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out