Resume - Over 20 years experience in LNG and Oil Refinery /Panel/Plant-Operator/Superviso...

Misco Jobs

Resume #66194

CONTACT INFORMATION:
View contact information...

Objective: Senior Level Assignment, Panel - Plant Operator, Production Supervisor,
Commissioning co-ordinator in Oil and Gas Industry.

Summary of Qualification:
A competent professional with over 20 years of qualitative experience in Plant, Panel Operations/Commissioning/Major shut-downs in Oil & Gas Sector. Exceptional knowledge and experience in trouble shooting plant abnormal limitations. Greatly contributed information to Plant optimization. Working as Panel Operator using Emerson's Delta V DCS in Marathon Oil's EGLNG Train 1 at Malabo (Conoco-Philips Optimized Cascade process). Worked as Panel Operator, Plant Operator and a Supervisor Reliever in Pilipinas Shell Petroleum Corp. Tabangao Refinery. With Strong Shell HSE culture at Mind and at Heart.

Professional Experience:

June 2006 – Present: Working as Panelman for (Marathon Oil) Equatorial Guinea LNG
Train 1.
* Job involves operating the plant from Emerson's Delta-V DCS, SIS PLC system & Mark-VI
compressor/Turbine control System. This LNG train employs Conoco-Phillips
Licensed Technology for Gas Liquefaction.
* Actively involved in the Commissioning with Bechtel, Conoco-Phillips and other Vendor
Start-up team.
* Underwent several trainings as per Marathon Oil Company standards like: STOP
training, computer based training, Bechtel training, Conoco-Phillips training, vendor training etc.

March 2002 – June 2006: Worked as Operations Technician (PSPC)
* Function as a Shift Supervisor in his absence covering five operating units.
* Overseeing overall operations of Gas Turbines, Platformer, SRU, Utilities, Amine, and
DCS Panel.
* Resolve work problems and recommend measures to improve productivity and product quality.
* Provide information to engineering plans to ensure that maintenance and production objectives are met.
* Constantly remind operators of awareness in the execution of duties, safety procedures and company policy.
* Actively involved in Major shut down and Start ups.
* Provide Job Packs.
* Replace Control Room Panel Operator or any unit/field operator if required.
* Act as Brigade or Incident Commander in his absence during fire or any emergency situation.
* Assist in management of team (shift) regarding HSE performance, KPI and strategy.
* Prepare Work Permits (computerized permitry system – PACER).
* Identify, investigate, correct and document potential environmental and safety problems.

May 1999 to March 2002: Worked as Control Room Panel Operator (PSPC)
* Optimize production under safe condition using DCS Panel Centum XL-Yokogawa.
* Keep all unit under my scope in a steady state.
* Monitor deviations of process variables from set values and make necessary adjustments.
* Take corrective actions in adjusting operating conditions of the plant in the event of plant upset.
* Monitor and control the product streams as close as possible to the quality required by our operating program.
* Make sure that utilities requirements are healthy all the time.
* Analyze and investigate operational problems and give suggestion / recommendation.
* Assist in development and review of start up procedure.
* Records, logs and signs documents.
* Mentor to Panel Trainee.

June 1995 to May 1999: Worked as Field Operator for the following Units (PSPC).
Platformer and Stabilizer Units, Amine Unit (DEA), Sulfur Recovery Unit,
Power Generation and Steam System (Gas Turbine with Heat Recovery), LPG Unit,
Crude Distilling Unit, Demineralization Plant, Hydro-desulfurizer Unit and Hydro-
treater Unit.

* Responsible for routine jobs of proper sampling, inspection and basic equipment care.
* Responsible for the start up, normal and Emergency shutdown of Units and its efficient and safe operation in the field.
* Equipment preparations before and after maintenance activities
* Completed Learning Modules.
* Mentor to Unit Operator Trainees.
* Conduct regular Safety Act Audit.
* Regularly act as AGT ( authorize gas tester).
* Focal point between operations and maintenance.

March 1991 to June 1995: Worked as Field / Jetty and Panel Operator at Shell's LPG
Terminal (SGEI)
* Function as Control room Panel operator using Video Spector.
* Responsible for Routine jobs of proper sampling, inspection and basic equipment care.
* Worked on Jetty operations during Propane and Butane receiving, and LPG loading.
* Immensely involved in SGEI ISO-9000 certification.
* Equipment preparations before and after maintenance activities.
* Close coordination with third party (marine dept., govt. agency, costumers, ).
* On time delivery and Documentation of imported and exported products.

May 1987 to March 1991: Worked as Laboratory Technician (PSPC)
* Analyze Crude and hydrocarbon components/Process rundown stream samples such as:
LPG, Tops, Full Range Naphtha, Kerosine or Aviaton Turbine Fuel, Light gas oil,
Heavy gas oil, and Residue.
* Qualitative and Quantitative analysis of blended and finished products based on
ASTM, UOP, SMS (Shell method series).
* Produce and Issue Quality Certificate and Relay Test results to Operations
* Respond to emergencies and drive fire truck to the fire scene
* Coordinate with internal and external auditors
* Perform gas testing prior to hot works
* Standardization of reagents and Calibration of laboratory equipment / apparatus.
* Correlation of lab results against other laboratory.

Reference:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1251 to 1300 of 10917)

Go to Search Parameters...

Brief Description

Application for the Post of " Oil Rig Doctor " (Medical Officer/ Doctor/ Occupational Health Consultant / QHSE Rep./ Medical Advisor). (With On & Off Rotation Duty Cycle). (Offshore &/or Onshore).

Over 20 years experience in LNG and Oil Refinery /Panel/Plant-Operator/Supervisor

Thorough knowledge in Primavera, MS Project, MS Office & EVMS

25 years experience in LNG/Refinery plant/panel operations/commissioning

I have done PG in Chemistry with post Graduate in industrial safety from India and also completed NEBOSH - General Certificate from UK

Senior Rotating Engineer

A Process Engineer with a Masters Degree in Chemical Engineering from the University of Waterloo, ON, Canada and 10+ years experience in natural gas and polymer processing industries. Specialize in process optimization, manufacturing and troubleshooting.

I have over 16 years of working experience as a QC Inspector in petroleum and petrochemical construction Industry. I have knowledge and experience as Q/C inspector in various inspection activity like raw material inspection, welding procedure / welder performance qualification,various methods of NDT

HSE Coordinator / Offshore Safety Officer

I've developed leadership qualities and a proactive attitude, all of these combined with my experience in Maintenance and Well Production Operations, supported with software and techniques on Equipment condition analysis, laser alignment, corrosion testing, boroscopic inspection and vibration analys

Mechanical engineer in Oil&Gas Feild 18 yrs Experience in Installation, maintenance, QC in Static, Rotating equipments.

Able to learn Work Process and new software with ease. Experienced in the refinery of Blueprints, Isometrics, and P&ID¡¦s, Hand Skecthes. Experienced in structural steel supports and familiar in estimating material take-offs. Trouble shooting installation of pipe and assist Engineers in the field.

PhD Petroleum Engineer (Production Technologist)

I have 15 years Lab experience such as 6 years of LNG plants, 7 years of Refineries and 3 years of Aromatic and PTA plant Labs experience with 5 new labs commissioned experience. I have a good knowledge regarding the dosing of corrosion inhibitor at wells side. I can conduct Oil & Gas analysis.

I have a strong ability to communicate and work effectively with co-workers and management. I am Self motivated, detail and goal oriented person. I am experienced in working with little to no supervision. I posses effective skills in communicating orally and in writing

Talent Management, Talent Acquisition, Talent Development, Change Management and Lean

M tech stctural engineer in Civil department, i am having expeerience in oil and gas as sr engineer in civil and structural department.

I am familiar with almost all of Pennsylvania. I currently have over 30,000 acres available to me for lease, most of it has been identified as being in the marcellas shale regions. this acreage also holds shallow oil and gas reserves. A substantial amount has current production which is available

Senior Piping Designer

Heavy equipment operator

Mechanical Fitter (Foreman) Maintenance Department. - 25 years experience

39 years experience running both surface & mineral titles & preparing reports

Assistant Driller - Main activities and responsibilities on the rig DRILLMEC HH - 220

I have been responsible for all aspects of mineral and royalty acquisitions that there are. I am also an experienced permit agent and familiar with most aspects of two and three-d seismic permitting. Negotiated damage settlements.

I am a motivated individual with a high degree of HSE knowledge and operations integrity & commitment, I have operations & maintenance experience working in the oil, gas & chemical industry (without an OSHA recordable incident)

Versed in plant operations and turnaround codination. Seeking short term contract assignment.

Project Engineer & System engineer along with detail design experience and product development expertise gained from 20+ years working for NASA.

I am a Mechanical Engineer with work experience basically in Oil & Gas and Refining Project Management, Gas Compression Plant Maintenance, and Process Safety Management. Currently I live in Venezuela and planning to relocate to the United States. I have dual citizenship and fluent in both languages.

25 years of professional experience in the Front-end and Detailed Design and Engineering, Projects Engineering, PMC, Factory & Site Acceptance Testing, Supervision of Installation, Testing and Commissioning of state-of-art DCS, SCADA, Safety Shutdown and F&G Systems and field instrumentation

TQM facilitator & instructor /Lead teams to resolve to improve process/ 4 yrs offshore Maintenance Supervisor /2yrs manager offshores field/ 4yrs CMSM coordinator/6 yrs contol management stocks

Field Acquisition QC. Over 20 Years experience in Land Seismic. 3D Design by OMNI and MESA. Field processing of 2D/3D land seismic data (MicroMax,ProMax, VISTA, APEX) . Creating and verification of SPS files. Static correction.

Working as In charge OIL/GAS LABORATORY TESTING OF LPG/C2C3/NAPHTHA/OIL ETC. PROCUREMENT/CALIBRATION/MAINTENANCE OF EQUIPMENTS

OBJECTIVE: Add value by leading people and projects, solving problems, bringing order from chaos, turning dysfunction into productivity, in a petroleum exploration or development geology management position.

Contracts Int. Experience in Construction, Management and Administration (EPC), Materials Manager (PMC), Materials Control, Procurement & Expeditor; Fluent in English, conversational in French, Russian. Seeking to continue professional career effectively utilizing my skills and gained experience.

More than(18) years in piping design & construction. Specialize in stress analysis of piping system using Caesar 11. Worked in oil refineries, onshore & offshore, gas plant & petrochemicals e.g. Saudi Aramco & Saudi Basic Petrochemicals ,Petromin Shell & Jeddah Oil Refinery.

More than 10 years’ experience of coordinating structural projects and technology development acquired during the Master and Doctor Courses in Civil Engineering and working as engineer in construction, aerospace, offshore and onshore industries.

Working as a Rotating Machinery Specialist with specialist skills in machinery Componenant condition monitoring by Vibration analysis (CSI RBMware), Bentley Nevada DM2000 online monitoring system, Adre data collection, Flexware performance analysis, Ultrasonic check by CSI sonic scan and etc.

Strengths: detail oriented, flexible, analytical, self-motivated, adaptable, effective communicator and articulate. Experience in field drilling operation management with extensive hands-on technical, administrative and managerial functions; drilling technology assessment & implementation, contract

An accomplished and result-driven Management Executive with multi-faceted marketing experience. Exceptional communicator with demonstrated success interacting with people at all levels.

Lead Process Engineer for Oil& gas Offshore/Onshore projects for Conceptual, Basic /FEED and Detail Engineering, Optimization and De-bottlenecking

I have a total of 13 years of experience working as an Engineer in the Petroleum Industry. For the last 10 years I have been working as a Process Engineer handling all aspects from Conceptual Engineering through to the Detailed Engineering Phase. I am seeking work as a Senior Process Engineer.

Involved in commissioning and pre-commissioning activities.

To secure a long/short-term contract, or permanent position. In Construction, Maintenance, Commissioning etc. My current position is as an Electrical/Instrument Engineer (as to the above position I am negotiable).

Fourteen years of combined experience in petroleum engineering and G&G (U.S. & international.) Experience includes integrated 3D reservoir modeling, numerical simulation, reserves assessment, field development, and reservoir studies.

„Ï A thorough understanding of risk engineering and Health Safety and Environmental (HSE) management systems in petrochemical, chemical, oil & gas industries, gained in a consulting environment. „Ï Consulting experience related to Process Safety Management & Fire Audit, Dust Explosion

Health, Safety and Environment Specialist/Instructor with National (CIED-PDVSA) and International (North Sea) Certification. HSE and H2S Instructor. 20 years experience in Drilling, Production and Crude Oil Transportation in Safety related areas with National and International Operators and Contract

Professional Oil and Gas Geologist (Masters Level) with 10+ years global Wellsite and Operation Geologist experience. Experienced in pre-planning, supervising and post-well wrap-ups of multi-well/multi-rig programs.

Chemical Engineer, P.E. Petrochemical Design Background Experience

 11.0 years exp. normal Operations in a petrochemical & Gas plants mainly in operation of centrifugal compressors (cooper, kobelco & Elliott),reciprocating compressors ( IR ,SULZUR & Burckhardt ) ,all type of pumps (mainl

Rotating equipment / mechanical maintenance technician / Commissioning technician

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [ 26 ] 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out