Resume - More than nineteen (19) years of experienced (in Supervisory capacity) in the pe...

Misco Jobs

Resume #66855

CONTACT INFORMATION:
View contact information...

Date of Birth: December 15, 1949
Age: 58
Nationality: Filipino

Educational Attainment: B.S.in Mechanical Engineering
Cebu Institute of Technology, 1973 Graduate

Affiliation: Member, Philippine Society of Mechanical Engineers
Surigao del Norte Chapter

Position Applied: Commissioning Supervisor / Engineer

SUMMARY OF EXPERIENCES:

Over twenty-seven (27) years of work experienced, broken down as follows:

„X More than nineteen (19) years of experienced (in Supervisory capacity) in the petrochemical plant. In the GAS PLANT DEPT. process operation, pre-commissioning & commissioning works (normal start-up & shutdown and emergency shutdown) and maintenance and planning works. Knowledgeable in the standard operating procedures (SOP's) of starting and shutting down of rotating & reciprocating equipments such as motors, pumps, turbines, LP & HP Compressors, blowers, agitators, conveyors, etc. Also, knowledgeable in the SOP's of pre-commissioning & commissioning of the following equipments: Steam/Naphtha Catalytic Cracking Unit, Hydrotreating Units, Hydrogen, Carbon Dioxide, Nitrogen and Hydrogen Sulphide Gas production units, heat exchangers, columns, vessels, furnace heaters and tanks (LPG, Naphtha, Bunker oil, etc.). This includes the pre-commissioning jobs experienced in the EO/EG Project of BASF-YPC Co. Ltd. in Nanjing, P.R.China and the LOP Spheres & Logistics of CNOOC & Shell Petrochemical Co. in Nanhai, P.R. China and in the Dolphin Energy Ltd. Onshore Facilities Proj. in Ras Laffan, Qatar by JGC-Middle East, FZE.
„X About six (6) years experienced in the planning/estimating works for the complete rehabilitation of the Gas Plants; including the maintenance and warehousing works in other job assignments, both in local & abroad.
„X Almost 2 years experienced in the construction works (Heavy Steel fabrication, erection, installation and leak- testing works of the equipments) and the safety aspects of the work & workplace.

WORK EXPERIENCES

COMPANY: JGC - Middle East, FZE / Societe General Surviellance (SGS)

A. Project: Dolphin Onshore Facilities Project,
Upstream and Compression Facilities

B. Plant Owner: DOLPHIN ENERGY LIMITED

C. Location: Ras Laffan, State of Qatar

D. Job Position: Commissioning Supervisor

E. Duration: Oct. 02, 2006 ¡V Dec. 27, 2007

F. Job Description:

Must understand the process & functions of the system as per design & must be able to operate the system following the start-up or standard operating procedures.
∙Knowledgeable in Engineering Document & Inquiry System
( EDIS) & Integrated Commissioning & Progress System
Operations ( ICAPS ).
∙ Reports to Superiors on the progress of assigned activities.
∙ Perform lube-oil flushing, reinstatement of piping &
commissioning work of Hydraulic Power Units & the AGR Lean
Amine Pumps & its auxiliary lube-oil pumps.
∙ Knowledgeable in the Pre Start-up Activities ( PSA ), Pre
Operational Test Procedure of all equipments in the Gas
Treatment, Train 1, 2,3,4,8 & 9, Stream 1 & 2 ( AGR Amine
Sys. )
∙ Dehydration & Mercury Guard, NGL Recovery, HP & LP Fuel
Gas Drums; Trains 1,2,3 & 4; Stream 1& 2
∙ Inspect the P & ID's ( Piping & Instrument Diagrams ) against the actual installations, to check for any mechanical deficiencies
( e.g. difficulty in operation/manipulation & installation deficiencies of control valves, isolation valves, check valves, etc.)
∙ Conducts internal inspection of equipments ( i.e. tanks accumulators, columns, separators, filters, exchangers, vessels )
prior to final closures. Also, conducts final inspection of pumps
& its associated piping prior to mechanical turn over/ready for start-up.
∙ Supervised the commissioning support manpower in the execution of mechanical works e.g. leakage elimination, blind installation & removal, tightness test, instrument air or Nitrogen pressurization of process lines & equipments ( up to 82 bars ).
∙ Knowledgeable in doing gas test & in the proper use of the following devices: vibration meters, dew point meters, temperature measuring device, multi-gas detectors, Dew Point meter, Laser Particle Analyzer ( LPA ) for lube-oil, etc.

COMPANY: BECHTEL/SINOPEC/FOOSTER WHEELER (BSF China Co.
Ltd.) / NES Overseas Co. Ltd.

G. Project: Nanhai Petrochemical Project

H. Plant Owner: CNOOC & SHELL PETROCHEMICAL CO. LTD.

I. Location: Nanbianzao, Daya Bay, Huizhou, Guangdong, P.R. China

J. Job Position: Commissioning Engineer, OSBL Self Perform Commissioning

K. Duration: September 2005 to January 19, 2006

L. Job Description:

Pre commissioning works in the Low Olefins Plant Spherical
Tanks (T-1950 to T-1953 & T-1976 to T-1979) and Logistics
Area Tankage of CNOOC & Shell Petrochemical Co. (CSPC).

The job includes:

* Preparation of OSBL pre-commissioning procedures for water flushing, air blowing & drying, N2 pressurization for tightness testing, Nitrogen purging & inerting of process lines/ pipings, vessels and equipment.
* Supervision of the activities of Chinese workers, in the preparation of lines/pipings, vessels and equipment subject for pre-commissioning activities.
* Performance of water flushing of HP Fire water lines/piping to remove dirts & other foreign materials left during construction works. Manual testing of fire water deluge system.
* Doing walkdowns to determine the completeness of all the pipings & equipment works done by the construction groups. Make punch lists for rectification purposes.
* Performed air blowing jobs to removed remaining water, dirts & other debris inside the pipings and equipment.
* Conducts air drying activities, using dry compressed air, in pipings and vessels. Measured the air dryness (dp = <0 deg. C) using Dew Point Meter.
* Performance of N2 pressurization of vessels, tanks, its associated pipings, valves and instruments for tightness or leak test purposes.
* Inerting of vessels, tanks and pipings for preservation purposes. Also, measure the Oxygen content (<2% O2 req'd) of vessels & pipings as required using the Oxygen Analyzer.

COMPANY: JGC PHILIPPINES/TCCI

A. Project: Ethylene Oxide/Ethylene Glycol Plant

B. Plant Owner: BASF-YPC CO. LTD.

C. Location: Nanjing, People Republic of China

D. Job Position: Commissioning Supervisor

E. Duration: November 2004 to March 2005

F. Job Description:

Pre-Commissioning of EO/EG Plant. The Job includes Steam blowing of steam lines, air blowing and leak testing of process lines, (Re-cycle gas loop; ethylene and oxygen feed lines; CO2 Removal; EO Absorption and desorption; light end removal; EG dehydration; Quench and glycol bleed recovery; EG purification; etc.) Process column, (EO reactor; CO2 absorber; CO2 flasher; EO Absorber and stripper; MEG, DEG TEG purification column and tanks; etc.) Heat Exchangers (Feed product heat exchanger and cooler, Rich/Lean gas exchanger, Quench Cooler, EO stripper re-boiler, Glycol concentrator, Quench bleed cooler, etc.) Mechanical test run and function test of all equipment such as pumps & compressors (re-cycle gas, CO2 Flash, N2 compressor, etc), blowers and other rotating equipments related to EO/EG plant.

COMPANY: PHILNICO PROCESSING CORPORATION

A. Project: Surigao Nickel Refinery

B. Location: Nonoc Island, Surigao City, Philippines

C. Job Position: Officer-In-Charge, Plants Dept. &
Concurrent OIC, Safety Department

D. Duration: May 22,1997 ¡V July 31,2001

E. Job Description: (A) OIC, GAS PLANTS DEPT. ¡V

Plans, directs and coordinates the activities involving the detailed rehabilitation program and future re-operation of the 100 MT-Hydrogen Plant, 18.4 MT-Hydrogen Sulfide Plant and 800 SCFM-Nitrogen Generator, LPG & Naphtha Tanks. Assists and provide pertinent data's required by the managers and foreign consultants (i.e. APIL & KVAERNER) for the feasibility study to convert the Nickel Refinery from Ammoniacal Leach Process to Pressure Acid Leach Technology.

(B) OIC, SAFETY DEPT. ¡V

The principal function is to act as the employers' principal assistant and consultant in the application of programs to remove the hazards from the workplace and to correct unsafe work practices. Other duties are as follows:

„X Acts in an advisory capacity on all matters pertaining to the health and safety for the guidance of the employer and the workers.
„X Conducts investigation of accidents as member of the Health & Safety Committee and submits a separate report and analysis of accidents to the employer. Also, conducts health and safety inspection.
„X Coordinates all health & safety training programs for the employees & employer.
„X Maintains or help in the maintenance of an efficient accident record system & coordinates actions taken by supervisors to eliminate accident causes.
„X Provides assistance to managers in case of emergencies and untoward accidents. Conduct safety meetings and monitor the safety aspect of people at work.

COMPANY: Libyan Iron and Steel Company, LISCO

A. Location: Flatmills, Hot Strip Mill, Misurata, Libya, GSPLAJ

B. Job Position: Maintenance Engineer

C. Duration: October 13, 1993 ¡V March 31, 1996

D. Job Description:

Carry out shift schedule, plans & construction works. Prepare requisitions for operating supplies and spare parts withdrawal. Direct the activities of the field operators and maintenance men. (i.e. Filipino, Bulgarians, Egyptians, and Libyan nationals) during the scheduled preventive maintenance work of the plant. Control blocking & tagging procedures prior to maintenance works. Notify the Department Head of Mechanical Maintenance and Planning Office/Engineers for all non-operative equipment and its restraints for rectification purposes. Assists in making schedule of preventive maintenance activities of all the operating and non-operating equipment. Give suggestions and/or recommend solutions to existing maintenance & operational problems of equipment & its operating parameters.

COMPANY: Far East & Industrial Supply Co. Inc., FEISCO
(This company is engaged in heavy steel fabrication, erection and installation works and a supplier of industrial equipment to various industrial plants local & abroad)
Tandang Sora Avenue, Quezon City

A. Project: Middle Distillate Tank Rehabilitation

B. Plant Owner: Philippine Petroleum Corp., Lube Oil Refinery

C. Location: Bo. Malaya, Pililla, Rizal

D. Job Position: Safety Engineer

E. Duration: July 1, 1993 ¡V October 10, 1993

F. Job Description:
Reports to the Project Manager. Oversees the safety of the workers involved in the project and to the equipment's that were being worked or repaired. Sees to it that all the safety rules and regulations were being followed & implemented by the workers in the performance of their jobs. Conducts safety meeting regularly. Reports safety infractions committed by the workers & initiate or imposed disciplinary action as deemed necessary. Attend to the regular Central Safety Committee meeting called by the Phil. Petroleum Corporation and/or FEISCO.

A. Project: Washery Rehabilitation Project

B. Plant Owner: Philippine National Oil Company, Malangas Coal Corporation

C. Location: Zamboanga del Sur

D. Job Position: Quality Control & Safety Officer:

E. Duration: June 10, 1992 ¡V October 15, 1992

F. Job Description:
Reports to the Project Manager any deficiencies noted on the supplied materials and equipment's, fabrication and installation works, etc. for rectification purposes. Monitors/inspect the fabrication, construction & installation of 300 MT ROM Coal Bin, 65 meter Transfer Conveyor & 1 unit ¡V Truck Bath. Sees to it that all the works being done according to the designed, planned, materials and equipment specifications. Make suggestions & recommendations to speed-up the progress of works. Coordinates with PNOC-MCC staff's on any problems that arise during the performance of the job. Specially, those affecting personnel safety, work completion & plant operation. Sees to it that test run of newly installed equipment & its auxiliaries were carried out in accordance to the standard operating procedures. Oversees the safety of all the workers involved in the project. Sees too it that all safety rules & regulations were being followed/implemented in the performance of their jobs. Conduct safety meetings regularly or as deemed necessary.

A. Project: Beer Tanks and Brewhouse Project

B. Plant Owner: San Miguel Corporation

C. Location: Mandaue City, Cebu

D. Job Position: Mechanical Supervisor

E. Duration: Jan. 20, 1992 ¡V April 30, 1992

F. Job Description:
Supervises the fabrication, erection & installation works of various process equipment, e.g. Energy Storage Tanks, Hot & Chilled Water Tanks, Beer Buffer Tanks, Bright Beer Tanks, Spent Grain Dryers, Malt Hoppers, etc. and the installation of its commodity piping. Also, conducts hydro test and other pressure leak testing jobs on the newly installed equipments and its associated piping. Supervises twenty (20) subordinates. Make job accomplishment reports. Coordinates with San Miguel Corp. representatives on job related matters.

COMPANY: Nonoc Mining & Industrial Corporation, Surigao Nickel Refinery
(Formerly Marinduque Mining & Industrial Corporation)
GAS PLANTS DEPARTMENT
Nonoc Island, Surigao City, Philippines

A. Job Position: General Foreman II

B. Duration: Jan. 16, 1970 ¡V Jan. 19, 1992

C. Job Description:
Reports to the Superintendent. Keep him informed of any major restraints & limitations that come-up. Possess extensive knowledge of the pre-commissioning & commissioning works( i.e. start-up, shutdown and emergency procedures ) of all the operating equipments in the plant. Supervises the operation of the various process units and equipment operators under my control. Responsible for the safe, smooth and continuous operation of the entire GAS PLANT DEPARTMENT which operates the Hydrogen & Carbon Dioxide Plant, Hydrogen Sulphide Plant and Nitrogen Plant, to meet production schedule in coordination with other production departments according to the approved standard operating procedures, issued instructions, & cost & loss control programs. Sees to it that all company rules & regulations, standard operating procedures and policies are adhered to.

A. Job Position: Control Room Operator:

B. Duration: June 16, 1976 ¡V Jan. 15, 1979

C. Job Description:
Possess extensive knowledge of the standard operating procedures (sop's) in the pre-commissioning and commissioning works of the entire Gas Plants equipments. In-charge of the control panel operation relative to the field operation of the Hydrogen Plant, CO2 Removal System, Hydrogen Sulphide Plant, Sulphur Melting Pit and the Nitrogen Plant. Handles electronic controllers to control/maintain process, operating parameter; i.e. pressures, temperatures, flows, levels, console digital temperature indicator to monitor operating temperature at field.

A. Duration: July 12, 1974 ¡V June 15, 1976

B. Job Position: Plant Operator:

C. Job Description:
Knowledgeable in the pre-commissioning and commissioning works (i.e. punch listing, hydro-testing, tightness test, normal start-up & shutdown and emergency shutdown procedures) of all the Gas Plants equipments described herein. Incharge and handles the operation of the process units/equipment's of the following:

HYDROGEN PLANT ¡V hydrodesulphurization process, steam/naphtha cracking & reforming process, Lo & Hi Temp. CO Shift Conversion process, Benfield CO2 Removal & Compression System, High Pressure Hydrogen comp., LP & HP Nitrogen gas compressors, air compressors & blowers, various pumps, steam turbines, forced and induced draft fans, tubular fired heaters/furnace, process reactors, waste heat fired boilers, heat exchangers, packed columns, API separator, flare stack ignition system.

HYDROGEN SULPHIDE PLANT ¡V Hydrogen sulphide reactor and quench tower, sulphur melting pit, sulphur storage and pumps (reciprocating), heat exchangers, nuclear level control system, steam desuperheater, etc. H2S Product Gas @ 98 % Purity.

NITROGEN PLANT ¡V Air/Naphtha combustion process, CO2 absorption/desorption process, heat exchangers, amine solution pumps, combustion air blowers, High Pressure CO2 & Nitrogen compressors. N2 Product Gas @ 98.6 % Purity

NAPHTHA & LPG STORAGE /TANKS & DISTRIBUTION ¡V LPG Tank & vaporizer unit & control system, raw & desulphurized naphtha tanks & pumps and distribution system.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 301 to 350 of 10179)

Go to Search Parameters...

Brief Description

Well completions & workovers. Sand control, stimulation. Domestic & international. Onshore & offshore.

I am a senior electrical engineer and project engineer with over 30 years experience largely gained within the Petro-Chemical, Liquid Natural Gas (LNG) and Power industries. Experienced in UK and overseas operations both on and offshore, Start-up, resident and project based engineering roles. A good

pipeline inspection and tyhird party inspection

Instrumentation supervisor, Instrument engineer, Instrumentation analyst, Instrumentation superintendent

Petroleum geology engineer graduated from Algeria in 1974 , worked for The Sonatrach - Exploration division until 1982 working fro water well drilling in Jordan and still , supervise all drilling , geological and tendering activities, speaking English, French & Arabic languages.

B.sc in petroleum engineering from tulsa university ,oklahoma,U.S.A.,1985. work experience 23 years

Petroleum Engineer with postgraduate studies in System Engineer and Operations Research, over 20 year of experience, working in projects in Peru, Venezuela, Brazil and Argentina, in Offshore and Onshore areas. Involved in secondary, pressure maintenance and horizontal wells recovery projects.

Transport superintendant in oilfields and mine, English and Spanish fully , good ind handling perssonel,

Mechanical engineer

More than nineteen (19) years of experienced (in Supervisory capacity) in the petrochemical plant. In the GAS PLANT DEPT. process operation, pre-commissioning & commissioning works (normal start-up & shutdown and emergency shutdown) and maintenance and planning works.

05 years as well site drilling engineer&08 years as senior drilling supervisor&04 years as drilling Superintendent

Senior Drilling Engineer, Project Manager

Driller / Tool Pusher (Onshore / Offshore)

Geologist geophysicist interpretation

A well-motivated, mature and responsible geophysicist who has worked extensively on land 2D and 3D seismic acquisition and processing.

Civil Engineering from University of Indonesia (1989), 3 Years experience in engineering consultant company, 13 years in contractor company as project and HSE coordinator at various project (1991 - 2004), 2 Years as Supervisor at Petrochemical project, and 2 years as HSE coord at pipeline project.

Graduate with an Engineering degree having 20+years experience

EPCM Project Contracts Interface (Client-EPCM-Subcontractors)

HSE Engineer/ Senior HSE Engineer/ Deputy HSE Manager/ Permit to work co-ordinator/ Authorized Gas tester/ HSE Trainer/ Sea Survival holder/

17 years experience as a Drilling Supt - land rigs only. 18 years of Middle East experience.

Graduated in Mechanical Engineering. Have more than 20 years of Oil field experience. Domain: Drilling Engineering.

Emergency Management professional with 28+ years of combined experience; managing teams, providing technical expertise and leadership in programs, projects, operations, and training; in both Fire Services, Training Academy’s and the Petrochemical Industry

Petroleum Measurement Specialist Liquid and Natural Gas. Chemist and Lab Manager in LPG and Natural Gas. Measurement Supervisor for large pipeline company. Interested in challenging position in Measurement Field.

An experienced, multilingual professional with a strong hands-on international experience in Contracts Administration, Construction Engineering, Human Recourses in the oil and gas industries.

Mud Engineer

Electrical Maintenance Engineer With over 30 years of experience in providing services and solutions to electrical maintenance and Training & development etcin the engineering and Oil & gas industry.

Geophysicist with more than 15 years international experience in geophysics for major oil and gas companies.

PROJECT MANAGEMENT AND BUSINESS DEVELOPMENT OIL AND GAS SECTORS.Indian Energy sector is growing at a rapid pace never seen before. USD 50 billion is set for investment in next 5 years. I wish to offer my vast experience in Indian petroleum sector to manage business growth.

Mechanical engineer for heat exchanger, package, boiler, fired heater, fabrication, HTRI, compress

Team Leader Const/Maint. Oil/Gas Ind.Experienced in planning/execution of projects ,procedures , method statements , permit systems , progress rep. , reviewing change orders, QA/QC and HSE standards. Running multicultural workforces coordinating disciplines and subcontactors.

PhD in Mechanical Engineering with emphasis on Materials and Metallurgic Engineering. Special knowledge in Surface Technologies, especially Thermal Spraying. a German citizen with Permanent Resident Status in Canada.

SENIOR PROFESSIONAL ENGINEER OF 30 YEARS DIVERSE EXPERIENCE

Participates in inspection of Gupco’s R/Sh facilities to provide adequate advise on corrosion matters, especially MIC problems

Petroleum Geologist, having more than 22 years of experience. Presently working with Oil And Natural Gas Corporation Limited, India at Mumbai. Well versed in both development and exploration of hydrocarbon.

Wellsite geologist , Operation geologist ,The work is entirely based on a rig where the work activities during exploration and appraisal drilling projects are typically undertaken

I have 19 Years Experience (15 Yrs at Middle East and 4 Years at India) in PIPING FABRICATION, STORAGE TANK FABRICATION, WELDING, NDT, QA/QC, MECHANICAL AND PAINTING JOBS (QA/QC Activities, Inspection, Coordination & Supervision), in large International Major Construction projects (PETRO-CHEMICAL,

process engineer

I have been a Process Engineer for sixteen (16) years. My experience includes process design of oil & gas plants, expertise in conceptual, basic design and detail engineering activities, experience in steady state process simulation, and expertise in executing project engineering management of EPC

Marine engineer, 1st Class Certificate and Offshore experience.

Electrical Engineer, B.E qualification and 22 years of Electrical Power Distribution Design experience

Project engineering as well as civil structural design experience in the oil and gas, industry and civil works design, project management and construction environment

I have spent 27 years in operations of oil/gas-Petroleum Refinery. For the last 14 years I have been with Training centers As Process/Productions Instructor (classroom & OJT), in (Iraq, Jordan, Libya, Qatar, Oman, and OAPEC: Organization of Arab Petroleum Exporting Countries).

Having vast experience in the Gas Plant,Oil&Gas Plant,Petrochemical Plant Operations

World Class oil and Gas development / Operations Manager

Senior Petroleum Engineer with over 30 years drilling and completion experience in management and field supervision. Can provide technical and engineering support for drilling and completionand am able to lead cross disciplinary teams to a common goal.

I have 22 years of extensive experience from different Petrochemical plants, Oil & Gas , Power plants.

20 years combined working experience in Project Engineering, Construction, Design, Installation and power hook-up activity, Test and Commissioning of Electrical and Instrumentation Equipment including the Preventive and Corrective Maintenance

Telecom Contractor ,english speaking ,Bell System Trained, college degree in Telecommunications ,20 years plus Outside Plant Technician and AVAYA ACS PBX's seeks contract/fulltime work in Middle East or almost anywhere in the world.

Having strong Process and Operations background, diversified knowledge and experience of Oil Industry for approx. 25 years in Process Engineering, Operation, Projects initiation, Coordination and commissioning, Product and Market Development, Pricing, Techno-Economic evaluation, Client / Customer

A highly competent Senior Electrical/Instrumentation Engineer who has developed supervisory capabilities; QA / QC inspection skills; installation maintenance expertise; pre-commissioning, testing and commissioning competence; safety awareness; organising and co-ordinating flair; fault-diagnosis

First 1 2 3 4 5 6 [ 7 ] 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out