Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #67127
next resume »»
CONTACT INFORMATION:
View contact information...
Structural Fabrication Engineer
Education: Bachelor in Civil Engineering (Hons
Proffessional Affiliations: Member of the Institute of Engineers Australia
Chartered Professional Engineer
National Proffesional Engineers Register
June 2007 – October 2007
AMEC - Sakhalin II Phase 2 Project, PA-B Platform Hook-Up Phase
Senior AMEC Offshore Engineer / Lead Structural Engineer / General Designer Supervisor
My position offshore during the hook up phase of the PA-B topside is a combined role involving:
1.Fulfilling the requirements to comply with the Russian Approvals process and Russian Federal Law – the General Designer Supervisor Role,
2.Senior AMEC Offshore Engineer and
3.Lead Structural Engineer
Duties Include:
- Leading a multi-discipline engineering team offshore during the hook-up phase.
- Delegation of onshore carry over scope to the offshore Engineering team.
- Providing Structural Engineering support to the offshore Hook Up and Commissioning (HUC) Team.
- Providing Structural assistance to and liaison with the Transportation and Installation Contractor (SHI and Saipem) and SEIC HUC Team during the post-mating phase (activation of Friction Pendulum Bearings).
- Coordinating offshore multidiscipline Engineering queries and either resolving them through the offshore team or liaising with the Engineering office in Jakarta.
- Carrying out inspections, surveys and reviewing key construction activities associated with the hook up in accordance with the ITPs to ensure that design intent is achieved.
- Maintaining all General Designer documentation required under Russian Federal Law
- Review and approval of offshore design changes.
- Provision of input for daily HUC reports and preparation of weekly Engineering reports for the Design office in Jakarta.
November 2004 – June 2007
AMEC – Sakhalin II Phase 2 Project, Samsung Heavy Industries Fabrication Yard, South Korea
Senior Structural Engineer / Site Engineer
My position on site during the fabrication of the Lun-A and PA-B topsides and loadout frames is a dual role involving:
1.Fulfilling the requirements to comply with the Russian Approvals process and Russian Federal Law – the General Designer Role and
2.Structural Field Engineer
Duties include:
- Coordination, resolution and responding to structural site queries.
- Detailed Design and Preparation of Field Engineer Change documentation during fabrication of the topsides.
- Resolution of AFC documentation issues.
- Site Inspections, monitoring of fabrication, review of survey results and QA documentation to ensure design intent is adhered to.
- Working closely with Sakhalin Topsides Construction Team (STCT) Site Field Engineers and Samsung Fabrication Team to ensure timely participation of "Witness" and "Hold" points as defined in the Inspection and Test Plans.
- Provision of assistance to STCT during fabrication, jack-up and load out operations.
- Review and approval of design change requests from the fabricator.
- Participation in Structural Verification and Mechanical Completion Inspections.
- Offshore Structural Engineer for AMEC immediately after mating and during the initial hook-up of the Lun-A topside structure to the Gravity Base Structure (mid - June to end of July).
- Deputy Site Manager for AMEC responsible for the AMEC Support team on site (Nov 2006)
July 2004 – November 2004
AMEC – Sakhalin II Phase 2 Project, Croydon, London
Principal Structural Engineer
- Preparation and co-ordination of delivery forecast programs for the Lunskoye and Piltun topsides.
- Liaison with Tri-Ocean and reconciliation of interface details with the topsides. Supervision of the re-assessment of the fabricated Piperack Deck secondary steelwork.
- Review, assessment and response to site queries.
- Focal point for Lunskoye topsides close out engineering issues.
August 2003 – July 2004
AMEC – Sakhalin II Phase 2 Project, Croydon, London
Senior Structural Engineer
- Topside steelwork design on Lunskoye and Piltun taking in to consideration high seismic, transportation, wave slam, blast and environmental loadings. The design was carried out in accordance with AISC – LRFD.
- Coordination and engineering overview of the piperack deck on Lun-A.
- Liaison with PDMS designers and other project disciplines.
January 2003 – July 2003
Independent Travel
January 2002 – January 2003
Transfield Worley Limited – New Zealand
Structural Design Engineer
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 2051 to 2100 of 10014)
Go to Search Parameters...
Brief Description
Mechanical Engineer with 14 years experience in Oil and Gas Project Management
Over twenty years experience spent in the oil and petrochemical industry. Experienced in all aspects of electrical commissioning operations and maintenance. With design reviews and Vendor site visits through to fats. with the ability to liase with other disciplines on gas turbine and diesel generato
* 14 years managerial and supervisory experience in the field of Health, Safety and Environment (HSE) predominantly in oil and gas construction and refinery operations. Worked with Caltex (ChevronTexaco Company), TOTAL and was involved in conducting joint training program with Shell.
MAINTENNACE PLANNING / MAINTENANCE /PROJECT/CONSTRUCTION
Piping Designing / Mechanical Draughtsman including development of Layouts, Details, Isometrics, P&IDs etc. as per piping specifications for Onshore, Offshore, Refineries, Process Industries, Chemical, Power and Desalination Plant.
BE. Professional with 15 + Years of Sound Exposure in Project management, Engineering services, utility Operations, Erection, commissioning & Management
Mechanical and Marine Engineering. - Experience in Diesel Engines, Generators, Gas Turbines and Steam Turbines. - Experiences in Computerised Maintenance Management System (CMMS) and PMS - Electronic Maintenance Management System.
I am urgently looking for a job on an Oil or Gas rig. I have a high school and Waste Management diploma. I also have 23 years of experience in managemet. I am willing to learn new skills
Production and exploration test ranging from high volume critical sour wells incorporate multiple separators, line heaters, circulating and transfer pumps, to sweet shallow gas testing. Experienced in well testing with high content of H2S, CO2. Experienced in HP/LP separators, pumps and oil producti
CV
Effective communication, team building, annovative
Electrical Technician, Ross Hill and IPS SCR drives, Varco Top- Drives
Mechanical Supervisor(Power Plant). Have work experience in Pakistan Navy also.
Shift supervisor in LNG plant, commisionning engineer; productio manager, project maager
Having 11 years of rich experience in Project coordination and Procurement of Oil and Gas EPC projects.
Over 11 years Elec & Instrument &Control Engineering and Detail Design in Downstream Oil&Gas,Petrochem, Energy. Field Instrument Specs, Construction Dwgs, Site Supervision, FAT of Control Systems, Supervisory Role.
I am a Senior Structural Engineer with detailed design, field engineering, fabrication supervision and hook-up experience in the offshore oil and gas industry. I have gained a solid technical background and practical outlook by working on site in the oil and gas industry.
The solid luggage of my experience and my expertise in the exploitation and trainee, having formed with the most powerful methods and having applied them successfully, I am seeking a position to contribute for the progress of a leading multinational organization. I am presently in the retirement and
Expert in Well Stimulation (Hydraulic Fracturing, Acidizing) and Sand Control and highly experienced in sand face completion, production optimisation and FDP
I have done three years course in CHEMICAL(Plant Operation),NCVT, From Bhandara (Maharashtra) and having over 21 years of experience( Three years gulf expereance) of PreCommissioning/Commissioning of Petrochemical Gas(gasco, buhasa) And Chemical plants.
Laborer
I have 26 years Welding experience, including 3 years Fabrication, Welding and Maintenance on Oil & Gas Drilling Rigs, associated equipment and infrastructure. I am currently employed as a Welder for Drilling Contractors on an onshore Oil & Gas Rig at Fairview Gas Field with a 2 on 2 off roster. My
Training Coordinator, over (16) years of experience in petrochemical plant operations, and over (2.5) years of experience in the field of training.
HSE technician, Safety officer, HSE Advisor
Piping Designer PDS administra
Sixteen years of experience in Design and Analysis of offshore and onshore structures. Varied Experience in design of structures from Fixed offshore platforms, FPSO, Refineries to concrete structures. Working experience in various multinational engineering firms and various working locations.
Chemical Engineer having 15 years of experience in Refinery. Skills possesed include in depth knowledge of process design using simulation software and knowledge of various international codes.
Operations Manager - 18-yrs experience - Russia, China, SE Asia, Europe & US. Background in drilling, production & well servicing. Experienced with G&G & reservoir. Extensive experience in tendering & contract negotiation. Line management responsibility of budgets of >$250M.
Having a Diploma in Mech. Engg. with 18 years of Experience in Designer
Energetic and productive professional with broad-based experience in Maintenance Planning, Shutdown Planning and Project Management in Line with the Computerized Maintenance Management System.
I have total Twenty-one years hand on working experience in Electrical maint. and operation fields in various organization.
Control Electrical HV &LV equipment and Instrumentation Installation & Test, Cable wiring
Mechanical Engineer - Rotating Machinery & Packages
* A Petroleum Geoscientist with strong IT background having 10+ years full cycle experience of exploration & production industry with multinationals such as Eni, CGG and Lasmo Oil.
Seeking a challenging career as a Reservoir/Petroleum/Production Engineer in an E&P Company
15 years of progressive experience and responsibility with documented success in the areas of drilling, workover, completions, engineering, operations and supervision at various organizational levels. I’m seeking a challenging position as a Drilling &/or Work-over Engineer / Superintendent.
18 years experience in process design of refinery and petrochemical units.
Over 14 Years in Maintenance planning, Shutdown/Turnaround Planning in petrochemical Industries. And also in Maintenance of various Rotating and Static Equipment ;Construction Planning including costing.
Expand on my knowledge, skills and abilities to grow both personally and professionally making genuine impact in the organization. I like to be part of a geological, geophysical and petroleum engineering team that uses all disciplines to meet their goals.
I am a chemical engineer having over 18 years experience (8 years in Petroleum Development Oman – a Shell Group Operating Company) in the Exploration & Production petroleum industry covering onshore as well as offshore locations, particularly in Well Services operations in Oman and India.
A talented multi-lingual business professional with more than 10 years expertise in domestic/international business, market, and product development increasing market share by 30% and sales by 20%
A consulting petroleum engineer / project management position in a challenging environment which requires significant technical expertise. Available for immediate travel, domestic or worldwide.
I am a Chemical Engineer having more than 18 years experience in various Oil Processing / Gas Treatment / Petrochemical Process Plants . I have 6 years of Onshore / Offshore Oil / Gas Plants Operational Experience as a Production Supervisor
Job Title : Software Enginer Education : Ordinary Degree in Bachelor of Science Previous Employer: Motorola Australia Software Centre
Expert in understanding permeability of the carbonate reservoirs. With this help reservoir engineers can do their well level simulation rather easily. Fees are charged for every foot of well data studied. Work will be done at the place of the expert.
More than fourteen years hands-on and supervisory experience in Petroleum Refineries in Qatar, Saudi Arabia and Pakistan. Have been analyzing samples from all streams of different units. Have been acting as Lab. Group Leader during Group Leader's leave/absence.
6 years experience in the field of Mechanical, Piping Engineering Design / Drafting. A variety of successful projects for oil & gas, chemical and cement plants. Design, Drafting, CADD, and checking experience that includes supervision, conceptual layout, piping design, pipe supports, fabrication dra
Instrument and metering technician
level-1 licensed engineer in PHWR operation having 10 years of experience
Open Hole and Cased Hole Field Engineer
First
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
[ 42 ]
43
44
45
46
47
48
49
50
Next
Last
Seach Parameters
Change search parameters...
INDUSTRIES:
Petroleum/Oil/Gas;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2008 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com