Resume - To optimize the utilization of my technical and personal skills to manage variou...

Misco Jobs

Resume #67378

CONTACT INFORMATION:
View contact information...

Objective To optimize the utilization of my technical and personal skills to manage various technical and business operations and to maximize my learning capability to nurture my career to the peak of responsibilities.
*
Academics

„« B.E (AMIE) (Electrical Engineering) from Institution of Engineer's India (Calcutta).
Compled with aggregate CGPA of 7.36/10.0

„« DIPLOMA (Computer Application) from APTECH INSTITUTE
Completed in June 1997 with 71.50 %.

„« DIPLOMA (Electrical Engineering) From M.P.Board of Technical Institute (BHOPAL, MP)
Completed in April 1989 with 74.05 %.

„« HSC From Board of Secondary Education (BHOPAL, MP)
Completed in March 1986 with 73.0%

Associate Membership

Associate Membership of Institution of Engineers (India) Calcutta.
Membership No. A-517508/5

Trainings Attended
„« One Month in house training program in the process automation with Siemens
PLC (Simatic 135U/115U/95U/S7-200) & OP interface WINCC system from NEW ERA CONTROL System's (A Siemens system house) at Gurgaon.

„« One Week in house training with Honeywell EPKS DCS system from Honeywell Automation India, Pune.

„« Self Development program conducted by Quest system pvt. Ltd, Baroda.

„« Advance Supervisory programme conducted by System Management, Pune.

Project Details:
Title.: Project of "300 TPD Twin Wire Kraft Fluting & Liner Paper Machine"

Duration: March 2006 to December 2007.

Environment: Paper manufacturing application.

Role: Manager (Elect/Inst)
„« System designing and implementation of Electrical Switchyard and power distribution for 7000KVA MD for New Project, from 11kv/400volts.
„« HT & LT Transformer, Switchgears & panel layout designing, Power & Electronic Earthing layout with proper Fault level calculations.
„« Commissioning of ABB Safe ring switchgear and its protection system.
„« Designing and implementation of DCS system for 2500 System I/O tags for the New Project with Honeywell DCS EXPERION C-200 system, with field instruments up to third loop control (Fuzzy logics & System Algorithms).
„« Hookup of ALLEN BRADELY hardware system I/O's with Honeywell Experion system with additional SCADA points.
-----------------------------------------------------------------------------------------------------------------------
Title.: Project of " 2 MW Back Pressure Turbine with 30TPH Boiler for Paper Machine Steam Distribution and Power Generation"

Duration: March 2004 to December 2004.

Environment: Paper manufacturing application.

Role: Manager (Elect/Inst)
„« 1 MW Back pressure turbine (IBL & Turbo Tech make each) with Induction Generator in synchronization with the power grid.

-----------------------------------------------------------------------------------------------------------------------
Title: Project of Cracker Unit and Structural Shop with RELIANCE PETROLIUM

Duration: February 1998 ¡V July 1999

Environment: Petrochemical Industry

Role: Sr Engineer (Electrical)
„« Commissioning of Electrical System Switchyard and power distribution for (6*2000) KVA at 11kv/440Volts Cracker Unit Project
„« Commissioning of ABB make VCB protection relay SPAJ140C setting with backup protection settings.
„« Installation and commissioning of PCC and MCC units at different sections.
„« Installation and commissioning of Special purpose CNC & NC machines of Fanuc make.

Title.: Project of "50 TPD Tissue Paper Machine"

Duration: January 1997 to February 1998.
Environment: Paper manufacturing application.

Role: Asst Engineer (Electrical)
„« Commissioning of Power distribution system for 3500KVA MD for the Tissue machine Project, from 11kv/400volts.
„« Commissioning of Sectional Drives, PCC and MCC's.

Maintenance Summary
„« An Electrical Engineer adapt at usage of computer application with 17 Years of experience in the field of Predective,Preventive & breakdown maintenance, of the following Electrical/Instrumentation control system concerned with the below mentioned.

1. Utility (25MW) Turbo alternator set.

2. 1 MW Back pressure turbine (IBL & Turbo Tech make) with Induction Generator in synchronization with the power grid.

3. 66/11/0.440 KV, & 33/11/0.440KV Switchyard Distribution Substation

4. HV/LV Switchgear (SF6/VCB/OCB/ACB) equipments, PCC & MCC's

5. DC Digital Drives up to 400 Kw of Control Technic (Mentor-II), Eurotherm (590P+), Reliance (ACS 3000), Allen Bradely make.

6. AC Digital Vector Control Drives up to 450KW of Control Technic (SPMA), Eurotherm (690+), Allen Bradely (Power Flex 700) and Siemens (Simovert) make.

7. Process Automation control system with PLC based (Simatic 135U/S7-200) Siemens make with Operator interface WINCC.

SLC 5/02 and 5/03 (Allen Bradely) make with HMI 550 and 1000 Panel view with RS 485 communication to the synchronization of DC Digital Drives.

L5300 (Eurotherm) make with HMI L5311 through Fibre Optic Communication to the synchronization of DC Digital Drives 590P+ series.

8. Quality Control scanner system (Measurex MX-Open), JASCH QCS BTG-3000 and SPM/CNC &NC machines,

Achievements
„« Implementation & continual improvement of ISO-9001.
„« EMS, continual monitoring of Energy Management system on real time basis, to optimize the system's energy consumption.
„« Planning and System designing of Electrical Distribution and Instrumentation DCS.
„« Project planning, Commissioning and maintenance activities
„« Inventory management and Vendor Development for correct application in accordance with standards.
„« Successful commissioning of 300TPD, Twin Wire Kraft Liner/Fluting Paper Machine.
„« Introducing technology developments and changes through.
„« Evaluating the change requests in accordance with standards, and identifying the minimum impacts on the system.

Work Experience
Since MAR-06 onwards
„« Working with M/S Gayatri Paper Mills Pty Ltd, (250 TPD+300 TPD) Double wire Kraft Paper, Two M/C's as an Incharge of ELECTRICAL & INSTRUMENTATION Dept at Germiston,Johansberg, RSA.
Current Profile: System designing and implementation of Electrical Switchyard and power distribution for 7000KVA MD for New Project, from 11kv/400volts, HT and LT panel layout designing and Earthing layout with proper Fault level calculations.
System designing and implementation of DCS system for 2500 System I/O tags for the New Project with hook up of Allan Bradley and Honeywell DCS EXPERION C-200 system with field instruments up to third loop control (Fuzzy logics & System Algorithms).
Departmental man power management & monitoring their responsibilities, Also to encourage & guide the employees to perform with team spirit.

Co-ordination with the maintenance & Production divisional inputs/feedback in order to develop appropriate standards.

Evaluating the change requests in accordance with standards, and identifying the minimum impacts on the system.

Auditing implementation plans.

Existing system's Poject Planning, execution and commissioning of the Electrical / Process Automation / Instrumentation.

Introducing technology developments and changes through.

Fm MAR01-Feb06

„« Worked with M/s DAMAN GANGA Paper's Ltd, a 200 TPD, ISO 9001 News Print Paper plant as a Manager ( Electrical & Instrumentation) at Ambheti site,VAPI.

Fm JUL99-FEB 01

„« Worked with M/s Rohit Pulp & Paper Mills (100 TPD+70 TPD) Duplex & Writing paper plant as a Dy Manager (Elecrical) at Khadki site,VALSAD.

Fm FEB98-JUL 99

„« Worked with M/s Romar Positioning Equipments (USA) as a Sr. Engineer at Reliance Petroleum Jamnagar Refinary Complex.

Fm APR90-FEB 98

„« Worked with M/s Orient Paper Mills Ltd.A 250TPD Writing & Printing Paper plant as an Asst. Engineer (Electrical ) at Amlai site.

Personal Details Date of Birth: 25 ¡V 07 - 1970
Sex: Male
Nationality: Indian
Marital Status: Married
Present location: Germiston,Johansburg,RSA

Strengths * Motivational Skills
* Analytical Ability
* Logical Thinking Capability
* Optimistic
* Self Confidence

References:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 601 to 650 of 9855)

Go to Search Parameters...

Brief Description

QA/QC Engineer-International projects-Oil&gas industry

Highly motivated, energetic, hardworking, result oriented QA/QC professional, with Master of Science (Chemistry) who is well organized, flexible and determined to exceed performance standards. Offer a broad technical background with 22 years of profound petrochemical experience.

Pre-commissioning, commissioning, de-commissioning & Re-commissioning of Hydrocarbon tanks/LPG bullet/Double Wall Ethylene tanks & hydrogen bullets(150 kg/cm2) for statutory inspection ,Gas Turbine commissioning, Safety measures in Hydrocarbon storage, loading & handling system, SAP Operation

More than 15 years total experience on combined field in construction, inspection, engineering project management, commissioning and maintenance of instrumentation and control on gas and oil production facilities, geothermal, power, petrochemical and oleo chemical refinery plants. Extensive knowledg

Analyst/Technical Assistance for reservoir/production operations

I have extensive experience as a process engineer in refining and oil production that I would like to put to use in a technical service or economics and planning management position.

Chief Engineer/ Barge Mechanic with work experience more than twenty years incl. 8 years of Offshore (Juck-up's - 5 years). Education: Maritime Academy (five years course). CEng, MIMarEST.

Natural gas/ oil system Simulation and Optimization

B. Sc. ,Industrial safety diploma & environment diploma

Experience in inspection of Reformers, Heaters, Vessels ,columns, Heat Exchangers and piping

Electrical Engineer

Millwright/Industial Mechanic and Power Engineer 3rd class.

Procurement / Administrative

25 years in oil and gas production,constuction,commissioning and start up, very good written and spoken English

25 yr + hand seeking night tour wellsite supervisor slot either land/offshore, shallow/deepwater, underbalaced/hightemp, international/domestic

EDUCATIONL BACKGROUND: Diploma in Electrical Technology.

Science graduate with extensive Supervisory experience in Ammonia and Petrochemical (Ethylene/Sulfur and Formaldehyde) Plant operations/training. With having over 23 years in operations, comfortable working as Supervisor/ Training coach/Co-ordinator/DCS operation, ready to join immediately.

Registered master electrician

HVAC BOILER TECHNICIAN

I have experience of more than 22 years in the field of Power plants (CCGT/COGEN), MSF Desalination plant operations in the middle east (Saudi Arabia, U.A.E. and State of Qatar) and Chemical process industries (Bhabha Atomic Research Centre, Department of Atomic Energy, in India),. Presently working

Drilling Supervisor, Workover Supervision, Concentric Consultanting

Subsea Engineer FPSO Girassol, Subsea Technical Support related to FPSO production (280 Kbpd)

Lead Assessor

Twenty-Eight(28) years of progressive experience in Piping Design with function relevant to all aspects of Font End Engineering and Design, Plant Layouts, Piping Layouts, Isometrics, Material Take Off, Stress Analysis, Procurement and Preparation of Specifications, Plant Modifications, etc.

Joined E & P Company in 1989 and have worked in both onshore and offshore at different positions. As co man supervise operations on Desert Rig deployed for drilling and work over wells. Prior to current assignment worked as co man on jackup rig. Ensure operations are carried out safely & efficiently

All STCW certificates are valid and available

Water-flooding, reserve estimation, production forecasting, economic & risk analyses, reservoir characterization, tracer & pressure transient analyses. Well surveillance for development opportunities. Some thermal experience. Simulation experience to predict performance & optimize development plans.

Over twenty-five years management, technical, and business experience in a multi-national Oil and Gas environment. Several years experience in Indonesia as both Client and Contractor, with extensive experience in LNG. Strong technical background with broad business skills to match.

B.Tech (Mechanical Engg-5years's degree course with SAP experience in Procurement in Oil /Petroleum Refinery in India)

I have graduate degree with EMBA (Project Management) and have 13 years professional experience in material/inventory/warehouse department. Presently I am working with ORPC (Oman Refineries & Petrochemicals Company) at its Sohar Refinery Unit since 27-Feb-06.

piping

Skilled in Storage, Distribution, Scheduling, Warehousing and Material Handling Technology.

NACE CIP Level 2 Certified paint inspector having more than 13 years experience in the field of Technical service, Quality control, production, R&D in paint industry.

i am diploma engineer with university bachler degree in arts having 17 years experience in various projects like cement ,aeronautical and oil&gas and in construction with honeywell on dubai mall project.

Chemical Engineer with 17 years experience in Ethylene plant processs engineering,project,commissioning and operation . Presently working in world's biggest capacity single stream ethylene plant in key position.Looking for exciting opportunity.

Having 20 years of professional experience in various aspects of Detailed Engineering, Pre-bid engineering and Construction supervision & commissioning activities related to Control & Instrumentation (C&I) System for Oil & gas, Refinery, LNG & Petrochemical and power plants.

To optimize the utilization of my technical and personal skills to manage various technical and business operations and to maximize my learning capability to nurture my career to the peak of responsibilities.

Experienced in ASHRAE, SNAME, ISO (15138, 7547, 9943 and 8861), NFPA (70,90A, 90B, 92A, 96 and 496), SMACNA Design Standards, DW (143), AMCA, etc.

Electrical Engineer, Electrical Supervisor, Electrical Instructor, Maintenance Supervisor-Electrical

Oil separation Gas dehydration production and injection and Water treatment and Injection

Expertise in Drilling fluids, cementing and waste treatment

Field Service Engineering including site survey, startup, inspection, construction project management and commissioning of metering systems. I&E design and engineering of custody transfer liquid & gas metering/proving systems

Outstanding background of knowledge’s into oil and gas processing and utilities, more then 14 years experience into commissioning and process activities from which more than three years offshore, working into an multicultural team and with all disciplines engineers, proactive and disciplined

An engineer with experience in all areas of pump manufacturing

Installation, commissioning, testing & operation of transformers, Power Control Centre, Machine Control Centre Panels

M.Sc with 15 years Laboratory experience in Analytical Lab.

About 25 years of Process Engineering experience including fifteen years with EPC companies in the Arabian Gulf states in the Oil & Gas industry.

An innovative and seasoned Marketing professional with expertise in consultative sales and marketing, strategic planning, brand management, market research, sourcing, procurement, supply chain and logistics, and with 20 years of successful progressive experience in all phases of market consulting.

Project management. Construction management.

I have 12 Years of Expierence in Oil and Gas, Fertilizer, Power and Petrochemical plants, I Worked with so much of time in commissioning and pre-commissioning of Gas/Steam Turbines, compressors, vessels, tanks, and Pipe lines with world known multinational companies in Production department, Current

First 1 2 3 4 5 6 7 8 9 10 11 12 [ 13 ] 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out