Resume - Well completions & workovers. Sand control, stimulation. Domestic & internatio...

Misco Jobs

Resume #67462

CONTACT INFORMATION:
View contact information...

I am a Completions Engineer based in Houston, Texas with 30 years total experience. This includes extensive experience in completion and workover design offshore and onshore, covering the tendering process through design and field supervision. Internationally I have worked in the North Sea, the Flores Sea, the South China Sea, the Caribbean, the Persian Gulf, and central Asia. Domestically I have worked extensively in the Gulf of Mexico and south Louisiana.

My last overseas assignment was planning and overseeing all aspects of well completions in the rain forests of Sumatra, Indonesia. Although the job was based in Jakarta, much of my time was spent on location supervising single and dual gravel pack completions of oil wells. Part of my job description involved training and mentoring Indonesian personnel. My most recent position involved evaluating and designing interventions in Oklahoma for BP. I have worked as part of a team designing all aspects of completions for extended reach horizontal wells in Far East Russia for ExxonMobil. This involved intelligent completions, expandable tubulars and horizontal gravel packing. My current position involves evaluating and designing interventions in the Gulf of Mexico for The Houston Exploration Company. I have conducted deep-water well tests from floaters in the Flores Sea and the South China Sea.

The ability to work within teams has been a prerequisite on every project. I have expose to drilling operations and a rudimentary knowledge of facilities, log evaluation and waterflooding. I am computer literate and my passport is current.

If my qualifications do not meet your requirements, please keep me in mind for any future permanent or consulting assignments. I am available for short or long term assignments, office or field.

Position Objective: Permanent or contract position as a Completions Engineer

Qualifications Summary:

- Bachelors Degree in Petroleum Engineering from Mississippi State University.

- Progressively responsible experience in domestic and international operations, to include sand control, frac-packing, acid stimulation, tendering, artificial lift, coiled tubing, fracturing, perforating design, snubbing, drill stem testing, filtering and solids free completion brines.

- Extensive experience supervising field operations on jack-ups, platforms and land rigs in straight and highly deviated wellbores.

- Experienced in preparing AFE's and conceptual planning studies for a series of international, multi-million dollar projects including scheduling, budgeting, tender specifications and bid evaluation.

- Well-organized and experienced at troubleshooting, implementing optimal solutions and preparing comprehensive plans and procedures for well completions and workovers.

- Exceptional oral and written communication skills, capabilities in supervising and training technical personnel.

- Computer literate.

Professional Affiliation: Society of Petroleum Engineers

Experience:

Consultant: Houston Based
1989 to present

Performed a variety of engineering tasks as required by clients.

- Designed frac procedures for new, hard rock, horizontal wells in the Fayetteville shale for Southwestern Energy.

- Responsible for planning of all phases of completion design for extended reach horizontal wells on Sakhalin Island, Russia. Includes expandable tubulars and screens, optimum tubing size and threads, conceptual designs, cost estimates, risk analysis.

- Responsible for planning, logistics and supervision of all phases of completions on Sumatra, Indonesia. Defined tender specifications, analyzed bids, prepared procedures and AFE's, supervised fieldwork. All wells gravel packed. Position based in Jakarta for Santa Fe Resources.

- Designed frac workovers in Oklahoma for BP.

- Designed ESP's for Shell.

- Evaluated drilling equipment and practices onsite in Republic of Uzbekistan for Enron Oil & Gas joint venture feasibility.

- Established database of existing wells in Siberia while on location for Occidental joint venture. Analyzed problems and suggested solutions.

- Advised on workover procedures and conducted sour gas DST in open horizontal hole, Occidental Pakistan.

- Devised a comprehensive feasibility study to develop a shallow gas field in Mobile Bay.

- Developed plans, procedures and budget analysis for workovers and new completions for the Gulf of Mexico and West Africa.

- Planned completion and workover operations in the Gulf of Mexico for a series of operating companies: The Houston Exploration Company, Tejas Gas, Mitchell Energy, Elysium Energy, Nerco Oil & Gas, Pennzoil, Scana Petroleum Resources, Mariner Energy, and British Gas. Procured necessary equipment and personnel. Filed paperwork with government regulatory agencies. Supervised field personnel and managed all aspects of operation.

Amoco Production Company, Houston, TX
Staff Completion Engineer 1983 to 1989

Troubleshooter for international drilling department on techniques, procedures and mechanics of completions; including stimulation, sand control, ESP's and completions in high-angle wellbores. Involved frequent international travel.

- Designed unique technique for deepwater completions on tension-leg platform with flexi-float risers.

- Developed procedures and plans for coring well operations in Colombia.

- Directed gravel packing of chalk producing formations in underbalanced conditions, eliminating well and facilities downtime, the North Sea, Norway.

- Reduced rig operating time by changing completion equipment and procedures in highly deviated wells, the North Sea, Scotland.

- Eliminated flash fires and prevented platform shut-in by quickly initiating procedures to repair wellhead leaks, offshore Trinidad.

- Supervised DST operations on floaters, South China Sea and Flores Sea.

- Supervised ESP installation and removal in the North Sea, Scotland.

Forest Oil Corporation, Lafayette, LA
Drilling Engineer 1981 to 1983

- Developed drilling plans, work schedules and AFE's for operations in the Gulf of Mexico.

Marathon Oil Company, Lafayette, LA
Production Engineer 1979 to 1981

Responsible for maximizing well production by acid stimulation and other workover techniques. Negotiated offshore services to achieve best performance for optimum price.

- Initiated, planned and supervised completion of Gulf of Mexico platforms with as many as three gravel packs in a single, high-angle wellbore.

Chevron U.S.A., Lafayette, LA
Production Engineer 1974 to 1979

Responsible for proposing and supervising remedial work and maximizing production in the Gulf of Mexico and inland water fields. Forecast reserves and production for annual budget reviews. Supervised offshore drilling and workover operations.

- Acted as advisor to ARAMCO in Saudi Arabia, generating and analyzing data for reservoir model study.

- Prevented rig workovers and by washing sand plugs in production strings with coiled tubing and non-damaging brines.

- Increased flow rates by cutting off water production with through tubing bridge plugs.

- Filed paperwork with government regulatory agencies.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 10902)

Go to Search Parameters...

Brief Description

Highly experienced and successful management professional with a demonstrable record of accomplishment; currently seeking a challenging role, within a multi national environment. Offer a range of transferable skills within the areas of strategic management, business process re-engineering, etc

Foreign Exploration Country Manager, Oil Exploraton

Well completions & workovers. Sand control, stimulation. Domestic & international. Onshore & offshore.

Petroleum Engineer with postgraduate studies in System Engineer and Operations Research, over 20 year of experience, working in projects in Peru, Venezuela, Brazil and Argentina, in Offshore and Onshore areas. Involved in secondary, pressure maintenance and horizontal wells recovery projects.

Total 18yr of experience in Piping FEED, Design and Detailed Engineering, Having good expousure of 3D engineering software.

Seismic data processing /reservoir simulation software developer

19 years Experience in Instrument during construction, commissioning, start-up and Maintenance in many different Oil & Gas, Refinery and Petrochemical Projects

PDMS Administration

Civil/steel structure supervisor

Extensive experience on drilling as Wellsite Supervisor, Senior Well Engineer, Wells Superintendent

Project Management

Control Systems Specialist

17 years of post qualification experience in Detail Engineering of Pressure Vessels (Oversized & Shop Fabricated), Reactors, Separators, Drums, Columns, Spheres, Tanks (Storage & Low Pressure), Flare Stack, Vendor Packaged Equipments, Emergency Diesel Generator and Overhead Cranes

Instrument supervisor / foreman

Highly Experienced Well Site Supervisor.Underbalanced High Pressure HighTemp Deep Horizontals

Thirty years experience as a drilling supervisor for an major international operating company. I have an Associate degree in Petrouleum Technology. I am currently consulting in Oman on a land exploration well. I have over 20 years international experience.

Certified Production & Inventory Management professional

25+ years experience in electrical/control system design for the petrochemical industry. Additional three years experience in civil engineering. Experience has included electrical/instrumentation design to NFPA, NEC and ISA standards, field engineering, as well as managerial experience and CAD.

Drilling fluid superintendent / supervisor ( mud, cement, waste management)

I am a knowledgeable Mechanical/Piping Designer with Project Engineering experience, capable of increasing degrees of responsibility.

I have twenty five years of piping design, 10 years of project leading with in the piping group, shop fabrication & field construction c/w PDS & AutoPlant soft wear experience. I have US work experience & posses a valid Social Security card.

Offering more than Fourteen years of Experience in Marine, Offshore, Oil & Gas Industry with a wide variety of projects involved in Electrical & Instrumentation Disciplines. Acquire extensive knowledge in a broad range of Computer programs & other Various E & I Engineering Field

Expert in managing conglomerates and applying strategic planning and control instruments

Instrument / Controlsystems Engineer

Driller / Tool Pusher (Onshore / Offshore)

Geologist geophysicist interpretation

EPCM Project Contracts Interface (Client-EPCM-Subcontractors)

Emergency Management professional with 28+ years of combined experience; managing teams, providing technical expertise and leadership in programs, projects, operations, and training; in both Fire Services, Training Academy’s and the Petrochemical Industry

Electrical Maintenance Engineer With over 30 years of experience in providing services and solutions to electrical maintenance and Training & development etcin the engineering and Oil & gas industry.

To obtain a challenging position with an engineering firm where I can use my relevant skills and experienced as Interface Design Coordinator / AutoCAD Supervisor and be a contributing member in the growth of the company. Willing to work as a key player in challenges where I can put my committed atti

I am capable of achieving organisation¡¦s objectives and organic growth through effective contributions. I have over 13 years of experience in the areas of Health, Safety & Environment Management

Maintenance Supervisor/Security, Maintenance Supervisor/ I&C, Project Manager

20 years fire fighting experience.Now working in ADNOC Off Shore facility

Having 23 years of sound experience in piping and equipment design for Onshore / Offshore Oil and Gas, Petrochemical and Chemical Industries.

24 Years of experience in Piping/ Pipeline Design Engineering for Oil & Gas of Onshore and Offshore facilities.

Experienced land professional with a strong background in all phases of petroleum land management. Proven expertise in a variety of situations, as well as proven leadership skills as demonstrated in Land Manager positions with two companies and as an independent lease broker utilizing the services

Structure designer is make development basic design from engineer to make engineering drawing with make details, sections, connection types and discuss with other department like piping, civil, mechanical etc to make problem solve in engineering design or site.

Mechanical engineer for heat exchanger, package, boiler, fired heater, fabrication, HTRI, compress

25 years Petrochemical / Oil Process Operations Including 10+ years in Supervisory / Man Management positions Commissioning and Start-up Assignments (Overseas)

Team Leader Const/Maint. Oil/Gas Ind.Experienced in planning/execution of projects ,procedures , method statements , permit systems , progress rep. , reviewing change orders, QA/QC and HSE standards. Running multicultural workforces coordinating disciplines and subcontactors.

PhD in Mechanical Engineering with emphasis on Materials and Metallurgic Engineering. Special knowledge in Surface Technologies, especially Thermal Spraying. a German citizen with Permanent Resident Status in Canada.

SENIOR PROFESSIONAL ENGINEER OF 30 YEARS DIVERSE EXPERIENCE

Participates in inspection of Gupco’s R/Sh facilities to provide adequate advise on corrosion matters, especially MIC problems

Petroleum Geologist, having more than 22 years of experience. Presently working with Oil And Natural Gas Corporation Limited, India at Mumbai. Well versed in both development and exploration of hydrocarbon.

Wellsite geologist , Operation geologist ,The work is entirely based on a rig where the work activities during exploration and appraisal drilling projects are typically undertaken

Over 14 years E & P and Service Industry technical experience with proven records of project deliverables. strong technical background as a Geoscientist, i.e.; Production and Development Geology, 3D reservoir modelling, Integrated Field Development study & Field Reviews.

More than fifteen years Experience, working with consulting engineering companies in Iran and Canada, with different assignments in variety of projects including EPC, R&D, master planning and feasibility studies

I am a professional process engineer with over 15 years experience

Free! Health, Safety & Environment Manager - Crane Inspector - OHSAS 18000 Lead Auditor - Senior Trainer - HSE Master Degree

Electrical Engineer, B.E qualification and 22 years of Electrical Power Distribution Design experience

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out