CONTACT INFORMATION:
View contact information...
Objective
Seeking A Project/Civil/Structural Engineering position
Highlights
* Project cost analysis and estimation, confirm design changes, material and ensuring that costs do not exceed appropriated amount
* Followed and inspected the construction progress of the project ensuring conformance with design specifications, codes and standards.
* Excellent interpersonal skills with the discipline team and with other disciplines
* Experience in oil/gas project related structures such as pipe racks, equipment, vessel, and stack foundations.
* Extensive experience in structural analysis and design for steel and concrete
* Solid background in structural dynamics, and computing for structural engineering
* Solid computer skills: S-Frame, SAP 2000, ETABS, STAAD III, STAAD PRO, DYNA5 RISA 3D, DRAIN RC, DRAIN 2DX and MS Office
* Competent in the use of American and Canadian codes, for both concrete and steel
Education
Ph.D.: Structural Engineering, University of Ottawa, Ottawa, Canada, 2005.
M. Sc.: Structural Engineering, Technical University of Lodz, Lodz, Poland, 1995
B.Sc. Civil Engineering, Gariounis University, Benghazi, Libya, 1990
Professional Experience
Colt Engineering/Worleyparsons, Calgary, Alberta (Jan 2007-Present)
Project Engineer (Shell Albain Sand Project )
1 Review the purchase orders with the objective to reduce the cost of the project.
2 Review the technical deviation
3 Review and update client specifications and technical standard
Structural Engineer (Suncor project)
4 Involved in engineering design study and detail design for Suncor Energy Fire Bag project, Fort McMurray, AB, Canada. Total cost of the project was Can $ 450 Million.
5 Coordination with other engineering disciplines within the company, clients, and vendors
6 Designed concrete foundation on piles and soil for vertical and horizontal vessel, compressor and pipe rack
7 Designed Ring Foundation
8 Designed piles capacity
9 Checked design calculations done by other Engineers
10 Design pump foundations for dynamic loads
11 Design heater skid for dynamic loads
Fluor Canada, Calgary, Alberta, (Apr 2006- Jan. 2007)
Structural Engineer
1 Carried out Engineering Design Study and detail engineering design for HUTGU project, Irving oil Ltd. Saint John, NB, Canada. Total cost of the project was Can $ 250 Million.
2 Involved in Engineering Design Study for FGO project, Irving Oil Ltd. Saint John, NB, Canada
3 Analyzed and designed main module pipe rack to support pipes, equipments like exchangers, air coolers, reactors, drums etc.
4 Designed concrete and steel foundations on piles and soil for vertical and horizontal vessel, compressor and pipe rack for static and dynamic loadings
5 Carried out structural design for steel pipe rack structures, including seismic and wind load design.
6 Involved in retrofitting of existing structures for additional service, seismic and wind loads
7 Checking design calculations done by other Engineers
8 Supervision guidance and mentoring of junior and intermediate Engineers
Engineering Consultant, Ottawa, Ontario (Sep 2004 –Feb 2006)
Structural Engineer
1 Modeling and analysis of test specimens, as well as the verification of the procedure employed.
2 Modeling and analysis of large scale beams and girder retrofitted by CFRP
3 Design reinforced concrete structures to resist blast loading
4 Upgrade an existing structure to resist blast loading
5 Retrofitting, modeling and analysis of existing reinforced concrete structures under different levels of explosion and locations.
University of Ottawa, Ottawa, Ontario, (Sep 2002- Dec 2005)
Structural Engineer, Department of Civil and Environmental Engineering
1 Design R /C Structures according to new and old codes
2 Retrofitting, modeling and analysis of existing reinforced concrete structures under static non-linear Pushover analysis
3 Retrofitting, modeling and analysis of existing reinforced concrete structures under Dynamic non-linear time history analysis
4 Upgrade existing buildings to satisfy modern seismic design code requirement (NBCC 2005)
Brown and Root Inc, GMMR, (EPC), Bengazi, Libya, (Mar 1996-Feb 2001)
Structural/Project Engineer
1 Administrated project cost analysis and expense estimation studies
2 Carried out design of steel pipe racks and pump foundation
3 Carried out structural design of different residential buildings.
4 Reviewed specifications, prepared technical reports
5 Review structural fabrication drawings
6 Provided on-site consultation
7 Designed retaining wall structures
El-Oroba Company, Derna, Libya, (Sep 1990-Sep1993)
Project Engineer
1 Project cost analysis and estimation.
2 Followed and inspected the construction progress of the project ensuring conformance with design specifications, codes and standards.
3 Confirm design changes, material and ensuring that costs do not exceed appropriated amount
4 Develop cost estimates for engineering, labor and materials based on analysis of preliminary design data.
5 Plan, schedule and provide work direction as required for preparation designs.
6 Supervised on-site constructions.
7 Designed multi-storey reinforced concrete buildings with area of approximately 250 m2 for each storey.
8 Design only two single storey reinforced concrete commercial buildings with area of approximately 450 m2.
9 Design of steel structural industrial buildings.
Affiliations
1 Registered Professional Engineer in Ontario.
2 Registered Professional Engineer in Alberta.
Presentation
1 Earthquake Loads According to NBCC 2005, Jan. 2008, Colt engineering, Calgary, Canada.
2 Comparison between a) Equivalent static Loads and b) Wind Loads, Jan. 2008, Colt engineering, Calgary, Canada.
3 Comparison between a) Equivalent static Loads and b) Dynamic Loads, Jan. 2008, Colt engineering, Calgary, Canada.
4 Different Methods to calculate the period of Structures, Jan. 2008, Colt engineering, Calgary, Canada.
5 Dynamic analysis of foundation, October 2007, Colt engineering, Calgary, Canada.
6 Loads on Structures, June 2007, Colt engineering, Calgary, Canada.
Training
1 Project Management workshop, September 2007, Colt engineering, Calgary, Canada.
2 Structural design of industrial facility, April 2007, EPIC, Calgary, Canada.
3 Sap 2000, October 2002, University of Ottawa, Ottawa, Canada
4 Earthquake loads, July 2006, Fluor Canada, Calgary, Canada.
Languages
English, Arabic and Polish
View contact information... |