Resume - I have 20 years experience in the oilfield, to include directional drilling, co...

Misco Jobs

Resume #67665

CONTACT INFORMATION:
View contact information...

Education
Haskell High School, Haskell, TX
I Graduated in May of 1986, after 4 years, with a general education diploma.
Texas Tech University
I majored in accounting for ½ semester, and played football for the Red Raiders.

Military
Army Reserve
I went to Ft. Jackson, SC for basic training and A.I.T. (Advanced Individual Training), in November of 1986. I was a squad leader over 8 men and a platoon leader over 63 men.
I was trained as a light wheel mechanic. I was a PFC when I finished in April of 1987.
 Employment
Aera Energy
100000 Ming Ave.
Bakersfield Ca. 93311
661-665-5000
8-1-2007 to 1-21-2008
I was hired through Temp Serv, a temporary service agency, as a drilling consultant. I watch over six different drilling rigs. I am responsible for all operations performed on the rigs, from start to finish. I have worked in several different areas of California. My pay is $850.00 per day plus expenses.
Haliburton
5221 Stine Rd.
Bakersfield CA. 93313
661-834-6464
6-27-2006 to 4-5-2007
I was a directional driller. I trained for three months, on several different rigs, in many different locations. Afterwards I was released to directional drill unsupervised for the remainder of my time there. I never missed a target or hit another well in my entire time there. I was paid on a per well basis of $1040.00 per well. I averaged drilling one well per day. My company truck broke down and I was terminated for being late to a location.

SPA Drilling
4700 Maple St.
Abilene, TX 79603
1-07-2000 to 12-23-2005
I was in a supervisory position as the head driller and an assistant tool pusher. Responsibilities included ordering and picking up supplies, doing all paperwork pertaining to payroll, hiring and firing my rig hands and teaching those hands that were new to the oil field. I was responsible for making sure that every phase of the drilling met with the strict OSHA requirements that had been implemented. My starting pay was $21.50 per hour. My ending pay was $6500.00 per month. All the oil companies are moving out of the area we lived in. I left as this was the right time to move my family back home to California and pursue a new career. (contact: Lee Creamer@325-691-9925)

Hack Drilling
4800 S. Treadaway Blvd.
Abilene, TX 79603
5-12-89 to 1-07-2000
Started as a roughneck within 2 years I was promoted to the supervisory position as head driller. My starting pay was $7.65 per hour. My ending pay was $20.00 per hour. I left because the company closed down.

M System
302 Ave. D
Haskell, TX 79521
9-28-1981 to 5-12-89
Started as a stocker, sacker, and cashier, was promoted to frozen food and dairy manager, and shortly there after promoted to an assistant manager. I was responsible for making out all schedules, hiring and firing, and training. My starting wage was 3.35 per hr. My ending wage was 800.00 every two weeks. I left because I moved to Abilene.
Extra Training
While in the oilfield I have attained skills such as electrical, plumbing, welding, cutting, and mechanicing, and have become proficient in al of them. I've had first aid training, BOP training "Blow Out Prevention", "STOP" safety training, and hazardous material training. I was in charge of between 3 and 11 men per rig.
I did the hiring, firing, and training. I was also responsible for the transportation to and from the rig.
While at M System I gained skills in customer relations, sales, warehouse, and management. I used cash registers, adding machines, and ordering machines.

Notes:
I have been in the oilfield for 20 years. For the years 2004-2006 out of 568 drillers in West Texas I was ranked as one of the top three drillers.
I am a very confident and self reliant person. I'm a self starter, I learn fast, I can follow directions or run with the ball if needed.
I am looking for a career, not just a job.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1151 to 1200 of 10018)

Go to Search Parameters...

Brief Description

A competent Fire Expert, with an extensive Fire & Safety background, and knowledge in corporate guidelines. A proven professional and Technical Communicator with expertise in Loss Prevention, Safety & Fire Protection support, safe work practices, fire systems and design reviews. He has been accounta

Petrophysicist, 11 years experience. Strong well log interpretation in vertical and horizontal wells. Thorough knowledge of Wireline / LWD tools. Experience in Clastic and Carbonate reservoirs. Expertise in core-to-log reconciliation and neural networks. Co-author on two books on well-logging data a

More than 20 years land mark f/R/b to tool pusher

27 Years Crude Oil Refinery and Manufacturing experience

Free! Senior marine officer with extensive experience in the offshore oil & gas industry,Currently shorebased marine regional manager

At Present im a lead contol room operator of a 400 mmcf gas processing plant in wyoming

Degree in Instrumentation, National University Indonesia, graduated 1993. 14 years Experiences in Oil & Gas Business as an Instrument engineer.

Inspection head in ExxonMobil Campana Refinery Argentina. 26 Years of experience in fixed Equipment Inspection. In charge of all Fixed Equipment Inspection and QA/QC including Contractor Management, new hired Inspector training, Technology improvement and cost control. Expertise in Coke Drum Inspect

Instrumentation ICSS commissioning specialist

Experience Summary : Works in Construction Project 15 years & Works in Travel & Tour 4 years

SPECIALIST IN PRECOMMISSIONING, COMMISSIONING AND START-UP

Twenty years experience in Petrochem/Oil and Gas industry. Looking for international assignment.

CONTROLS AND SOFTWARE SPECIALIST

My experience includes expert-level competencies in Mechanical Design Engineering, in Piping Materials Specification, in Pipe Stress Analysis and in Piping Items & Mechanical Package Procurement for Refineries, Off-shore Oil & Gas Platforms, Petrochemical Complexes, Chemical & Pharmaceutical Plants,

My skills are on 3D seismic pre - planning using OMNI software, SPS – Shell-processing support for survey data/coordinates and post acquisition quality control of seismic records. Has the ability to learn other G&G software’s and Maters degree in Exploration Geophysics

I am gas process engineer I have 12 years experience in gas and oil processing also i have 3 years gulf experience

INSTRUMENT ENGINEER

I am a career driven individual with desire and ambition to succeed, grow and develop with a dynamic and professional company like yours, one that can afford good prospects coupled with challenge for professional achievement and satisfaction.

Senior Reservoir Engineer with 20 years experience in Reservoir Simulation and reservoir management. Very good experience in Well Test Analysis, reserve estimates, material balance and enhanced oil recovery schemes.

I am a Civil Engineer w/ 28 yrs experience in oil & gas, infrastructure and gen. const

Graduate Diploma in Petroleum Engineering

I have been working for the past 22 years in project controls / planning, construction and maintenance disciplines in Oil & Gas, LNG, Fertilisers, Petrochemicals, Power and Refinery. I have a good knowledge of International Standards & working practices. Thorough knowledge of Primavera (P3).

Good communication,Self motivated,Analytical and Team player. B. Engr. Elect/electronic

Telecom Engineer transmission speciality more than 16 years experience

Strong management professional who enjoys growing business and improving performance.

18 years experience: design of suppression and alarm systems, manage design, review P&ID for HPR chemical plants, CFD modeling, nuclear industry FHA, performanced-based: (fire exposure, fire endurance, smoke control) designs, firefighting experience 5 years

Advanced engineering education with a MS degree in Mineral Economics. Emphasis in Financial Risk Management, Advanced Mineral Asset Valuation using MonteCarlo Simulation and Option Pricing Theory, Investment and Portfolio Management, Bilingual Spanish-English

A highly motivated multi-lingual manager seeking a challenging position overseas. I am computer literate with experience using Microsoft Office applications. I have excellent oral and written communication skills. I have worked for a company and clients with strong safety-cultures.

Position Objective: Senior Managerial position in electrical or electro-mechanical industrial firm. The aim is to bring the facility’s productivity, profitability and quality up to a highly recognized standards utilizing personnel, technology & procedures.

Lean Manufacturing, Manufacturing/Business Process Improvement, Value Stream Mapping, Factory Layout Design/Cellular Manufacturing, Process Mapping & Analysis, Performance Measurement, MRPII/ERP, Operations Management, Project Management, Cost/Benefits Justification.

I am an Indian national presently seconded to Brunei Shell Petroleum, having more than 13 years of Experience in the field of Oil, GAS (Onshore and OFF shore), petrochemical plant and project experience in the field of Reliability, Inspection, Construction & QA/QC, Pipeline, Piping.

I am working from 1999 to peresent as drilling supervisor in oil and gas fields in offshore in gulf and onshore in south of iran in exploration &new well&workover wells. I have IWCF certificate.

Experience well test engineer

OIL & GAS COMMISSIONING FOR PROCESS PLATFORM / DRILL SHIPS LIKE : MOSVOLD-1/2

I used to work in PT Weatherford Indonesia as QHSE Manager and PT Akzo Nobel Car Refinishes Jakarta also was a QHSE Manager. My main job basically is to help the company to have management system infrastructure in place and as a result to achieve ISO-OHSAS.

With Thirteen years experience for working on different types and application on line gas and liquid analyzers and gas Chromatographs all over India, Saudi Arab, Qatar in most of the industries like Refineries, Offshore sites, Fertilizers, Steel plant, Petrochemical plants etc.

Environmental Health and Safety Consultant with overseas experience and extensive background in plant constructions, plant pre-commissioning and commissioning projects, plant expansions, major repairs, routine maintenance in refinery complexes, upgraders gas complexes and power plants.

(i) 8 years experience in Contract Management in a corporate environment (ii)for developing and implementing business development plan in concurrence with the organization objectives connected with marketing of p

I have 20 years experience in the oilfield, to include directional drilling, consulting work, toolpushing, drilling, and roughnecking.

Construction management, supervision and engineering of mechanical and welding works e.g. oil and gas pipelines, pig-, pump/ compressor and metering stations, industrial plants, structural steel, filling stations, town gas and water distribution systems, working on oil- and gas life lines e.g. maint

17 Year expereice in Insrumentation , GE Harris, Realflex & Invensys SCADA Systems, ABB & Invensys DCS systems.

Drilling Activities: Drilling Operations: Bits, BHA, Drill String, BOP, Drilling Fluids, OBM, MWD, Wireline Logging, Conductor, Surface, Intermediate & Production Casing, Primary Cement, Wellheads. Offshore, Inland & Land Well Drilling Experience. Well Control. Drilling Management: Well Prognosis, A

Mechanical engineer in Repair and maintenance of Rotating equipment such as Pumps, Compressors(Reciprocating and Screw types), Gas Turbines(Solar Centaur), Air Fans and Blowers

FROSIO Certificate level 3. 28 years experience in oil & gas industry as coating/insulation inspector

Consulting Drilling ,workover, ,Directional Drilling ,Mud engineer

DIPLOMA IN ELECTRONS&COMMUNICATION ENGINEER

PABX SERVICE ENGINEER

Production Engineer with 12 years of industry experience

BSc in env. MSc in safety eng.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 [ 24 ] 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out