Resume - I,m familiar to operate with various analytical Instruments Laboratory such as ...

Misco Jobs

Resume #67678

CONTACT INFORMATION:
View contact information...

Place and date of birthday: Bogor, 31 August 1972
Sex: Male
Marital Status: Married
Religion: Moslem

Educational Background:

1985 Graduate from elementary school
1988 Graduate from Junior High school
1991 Graduate from High School
1994 Graduate from Academy of Analytical Chemistry Bogor, West Java.

Training:
- Boiler Water Treatment and Demineralizer Training by Nalco Indonesia, 2006.
- Cooling Water System Training by Nalco Asia Pacific, in KualaLumpur Malaysia, 2005.
- Operational On Line Silica Analyzer Training by Hach Indonesia,2005.
- Refreshing First Aid Training by Semen Gresik Hospital, 2005
- Refreshing Fire Extinguisher Training by PT. Petrokimia Indonesia,2005.
- On Line Analysis & Instrumentation by Mettler Toledo Indonesia,2004.
- Intermediate English Course by Indonesia-Australia Language Foundation,2003.
- Handling Spill of Oil & Chemicals Training by 3M Indonesia, 2001
- Handling The Chemicals Material Hazards, by MTC Consultants Surabaya,1999.
- Spectrophotometer visible analysis by Nalco Indonesia, 1999.
- Operational Gas Chromatograph Analysis by Shimadzu Analytical 1999.

Experiences:

August 1994-June 1996

As chemical analyst at PT. Nusantara Water Center a Environment Consultant Company, as analyst I responsible to analysis various sample such as waste water, soil, oil, gas, food and beverages both for qualitative and quantitative analysis. The instruments analysis that used are AAS ( Atomic Absorption Spectrophotometer), Visible spectrophotometer,UV & IR Spectrophotometer, Bomb Calorimeter, Turbiditymeter, Conductivitymeter, pH meter and Gas Chromatograph.

July 1996-June1998

As chemist at PT.Sadikun Niagamas Raya, a national company for additive oil. As a chemist, I have responsible to maintain quality of raw material such as base oil ( HVI 60), polymers, and the other materials until finish product as Additive Oil for Lubricant Oil. For maintain quality control, I am familiar with some analytical instruments such as Viscosity meter, flash point meter, karl-fischer for water analysis, furnace, mass balance and distillation device.

July 1998-Now

As Site Chemist at PT Gresik Power & Gases Indonesia ( BOC GASES Indonesia ) a Multinational Company (a Member of The Linde Gas Group).
As a Chemist I responsible to maintain quality of natural gas as main fuel to drive our Gas Turbine to result electricity power around 27 MW and also maintain quality of main Steam Turbine with capacity 18 MW where the total capacity is 45 MW. I also keep the quality of gases products from Air Separation Unit (ASU Plant) such as Oxygen, Argon and Nitrogen. In daily basis activity for support these job, I am familiar to operate various instruments analysis such as Gas Chromatograph, Spectrophotometer Visible, Conductivity meter, pH meter, Dissolved oxygen meter, Colorimeter, mass balance, stirrer hot plate, and conventional analysis method for titrimetric method ( buret, glasses apparatus, pipets). I also responsible for maintain quality of boiler water, demineralizer water, water condensate and cooling water system.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1751 to 1800 of 9906)

Go to Search Parameters...

Brief Description

i have 9 years experience in well testing as well test operator and well testing supervisor and have tested all kind of well and reseviors

With vast experiences in the field of (Oil & Gas) construction document control, general administration, secretarial, timekeeping procedure and Work Pack Management System – that includes project document compilation, archiving, coding and distribution, including Project Drawings, Isometrics, Manual

i have diploma engr in mech engg. having 18 years expr. of maintanance of processand power plant equipment

I am B.E. (Electronics & Communication) with 10 yrs. exp. as a QA/QC Engg in Oil & Gas Plants, Power Plants, Fertilizer Plants, Sea Water Plants in OMAN, K.S.A, UAE,QATAR with ARAMCO, PDO, DEWA, QAFCO and i am aprroved QC Engg & Inspector in instrumentation and Telecommunication

I am looking for a job in the marine sector. I have worked on board Tankers, OBOs, Bulkers and Container ships. I am an ex cadet of Bangladesh Marine Academy, Ctg. I did an Advanced Diploma in Marine Engineering from Singapore Polytechnic. I also hold a Singaporean Class 1 COC.

Oil and Gas processing Engineer

COMPETENT IN ALL ASPECTS OF ON/OFFSHORE CRANE OPERATIONS

Dedicated professional with 18+ years of experience in • Installation & service of Electrical submersible Pumps at onshore and offshore drilling rigs

11 years on instrumentation chemical and petrochemical plant, maily handle EMERSON DeltaV/Honeywell TDC3000/FF instrument

Sr. Welding / Coating / Structural / Piping Inspector with about 14 year’s Oil and Gas experience. My past experience includes Inspection/QA-QC related to Fabrication of Offshore Production Platforms, Christmas trees, Jackets ,Offshore rigs, Oil Refineries, GOSP and Gas plant piping / Structures, C

Process Assistant Shift Supervisor, Maintenance Coordinator, Turnaround Coordinator, Process Control Room Operator

Knowledge of SAP, Commerce Graduate and around 16 years experience Total, Worked in Logistics and Warehousing.

I am a post graduate in Chemistry as well as Ecology and Environment. I have worked with Petrochemical industries for the past 18 years. Presently I am working with Veba oil Operation, Libya for the last 2 years as water treatment specialist. I am well experienced in DCS operated production also.

International Sales Business Development Leader Oil & Gas

17 years experience in urea plant commissioning & operation

09 years of experience in an oil refinery as field operator at coke handling unit with Kuwait National Petroleum

Sincere and hardworking with good communication and interpersonal skill looking for some challenging assignment

B.Sc.(Engineering) Metallurgy and Materials Science.

Certified Cost Engineer. Graduate Mechanical Engineer with over Eighteen Years experience in preparing Project Cost Proposals / Tendering including Estimation / Quantity Survey, Costing and all related activities. Completed Eleven Years in Gulf (Bahrain).

Positions desired: Plant Services Supervisor, Platform Deck Foreman, Mechanical Supervisor

Fifteen years experience in the area of Seismic Data Processing including 2D and 3D land, transition zone, marine and OBC processing. Specialized areas including demultiple applications, imaging techniques, and Amplitude versus offset.

Seismic data processing, acquisition.

power system protection engineer with avery good experiance in protective relays testing control scheme troublshooting

Instrument Supervisor

Project Planner/Scheduler (Primavera P3 & MS Project Planning Software, MS Word / Excel). Vast experience in Steel Works Business - Planning, Fabrication / Erection (Storage Tanks & Steel Structures), Gas Plant / Pipelines. Completed Structural Engineering and 4 years in BS Mech'l Engineering.

Water well driling and development specialist.

Maintenance supervisor / Reliability specialist / Project Management

Broad base of experience within the Pulp/Paper, Pharmaceutical/Chemical and Bio-Technology industries involving design, engineering, construction, and commissioning. Management of projects (automation, instrumentation and electrical/instrumentation systems), quality, personnel and resources.

Developing & producing plot plans using PDMS 11.2 (CLS), pipe modelling (PDMS-PMS), Equipment modelling (PDMS-EMS), producing Piping Study & General Arrangement Drawings(PDMS-CAST), Producing Isometrics(Isodraft) & used Review Reality station for reviewing the plant model.

Certified ( Project Controls, AACE, #1366), published Engineer (BSPE and MBA) with over 15 years of direct field experience in Operations, budget design, Inventory control, Drilling Engineering, Oil Well Fire Control, Well design and Turnkey Bid estimates.

Education: Master in Chemistry Various certifications on Drilling Technology and Oil and Gas operations. Worked as Mud Engineer with MI Overseas. BakerHughes INREQ and IDF schlumberger in middle east. Worked as lab chemist with QGPC Qater, Mud Engineer with ADC Saudi Arabia ETC

Pr. Management-Estimating man hours, developing WBS CBS, Progress measurement techniques, monitoring by Primavera, project control, invoicing. Engineering-Prep. basic Instr data sheet, detailed ENGINEERING of DCS, FGS, SDS, control logic, SAFE. Commissioning -Elect system of process platforms

Senior Drilling Supervisor for 12 years. 19 years in oil industry. •Enthusiastic, determined, adaptable and focused with a good sense of humor. •Excellent management and team working skills, experienced in a wide range of cultures and environments.

I am experienced in long & short range mine planning, scheduling, budgeting, design of safety procedures & standards, production & destress blasting, mine backfill, ventilation, ground control, geomechanics modeling & design of stable openings (using the bifurcation theory in mechanics).

Offshore surveyor with geophysics experience

I have attained 17 plus years of field technical service in the Oil Refining, Petrochemical, & Refrigerations fields. I wish to utilize this experience, for advancement of my career, with a successful minded firm.

With more than ten years of working in different scope of manufacturing plants in the field of Quality and Safety, i am deeply qualified to your employment requirement. I am also a computer knowledgeable person. I can work also with different nationals in one company. Thank you very much.

I have worked in the Middle East for the past 16 years my last position was working for Canadian Nexen on their Oil Storage Export Terminal in the Republic of Yemen during my employment with Nexen I held various positions I started as Mechanical Technician.

Estimation Engineer - Instrumentation.

QA/QC professional experience in management, inspection, and a highly developed working knowledge in construction environments gained over more than 10 years of Oil/ gas plants, Petrochemical plants, Oil Refineries, Plant producing Facilities, pipe lines, Storage tanks, Reservo

MBA +9 yrs experience in materail managment

I am having Eleven years of experience in field of Electrical Engineering as a Planning & Estimation Engineer. I am looking for a challenging opportunity in field of Project planning.

Chemical Engineer with 11 years of experience in Project Engineering & Management in Chemical, Petrochemical, Refinery & Oil & Gas sectors.

working as senior production trainer refinery at petrosa south africa. was shift supervisor commissioned 3 refinery units from scratch as shift supervisor, see resume

Diploma obtained after 03years of technical school since 1972 to 1975 brevet of technical school.

Performing work as per international standards following operational excellence management system

To obtain a job in the in the Oil and Gas Industry that will challenge my abilities.

Mechanical Engineer Bsc. Hons. Project Engineer. Commissioning Engineer

•Experienced in sizing of process equipments •Experienced in using process simulation HYSYS, Pipeflo and Flarenet softwares• Expert in preparing process documents/drawings i.e.PFD’s and Data sheets•Familiar with ASME/ANSI codes, ASTM and API standards

I,m familiar to operate with various analytical Instruments Laboratory such as Gas Chromatograph, AAS, Spectrophotometer (Visible, UV,IR) , bomb calorimeter, viscosity meter, flash point meter, pH meter, turbidity meter, conductivity meter, glass ware apparatus for titrimetric method.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 [ 36 ] 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out