Resume - 20+ years in Control Systems Engineering/Design. Experienced Intools user.

Misco Jobs

Resume #6801

CONTACT INFORMATION:
View contact information...

CHIEF DESIGNER (Control & Instrumentation)
Intools Application Specialist
Commissioning Support

QUALIFICATIONS AND COURSES
S.C.E. 'A' Levels
National Technical Certificate 3 -Maths/Applied Science/Electronics /Electrical Trade Theory.
Advanced Intools Ver 6.3.2

Computer Courses
- INtools (Consultant Status).
- REBIS Systems (International Consultant Status)
- MMS (Material Management System, with interface to PCDSG/Facet ILG/Autocable).
- Primavera (Manpower & Material Management)
- PiSYS.
- dBase
- AutoCAD
- Microstation
- Automanager.
- MSOFFICE (Access\Excel\Word|Powerpoint)
- MSPROJECT
- Harvard Graphics.

ISO-9000 10+ years experience working to the requirements of this standard (Fluor Engineering).

SUMMARY OF EXPERIENCE
Twenty-two years experience in Design/Engineering comprising; -
- 10 years Chief Designer, Control Systems. for Fluor Engineers South Africa. Supervision of up to 20 design/draughting personnel.

- 2 years Senior Designer, Control Systems & Intools Specialist. For Fluor Engineers Netherlands.

- Engineering and Design Systems Software Applications Consultant - client Anglo American Corporation.

- Control & Instrumentation Engineer, Site Based.
Profibus DP\PA\ASI experience.
Siemens S7-400 and S7-300 experience.

- 3 years site and construction on Atomic Energy Corporation/UCOR projects.

- 6 years Principal Designer, Control Systems - for Engineering Management Services.

- 6 years Designer, Electrical & Control Systems - for Pretoria Portland Cement.

PROJECT EXPERIENCE
(Where manhours are shown these represent my accountability to the project manager for design/draughting teams.)

Petrochemicals/Refineries
- Genref RCR and SRC Projects (± 40,000 Design Hours Each).
- Sasol One Modernisation (Arge Synthesis Plant and Gasification Conceptual Study)
(± 22,000 Hrs Design).
- DSM Netherlands, EPT3 Polymer Plant
- Exxon Projects-
Sakhalin Island Crude Oil Export Terminal/Pipe Lines/Dekastri Harbour
- Secco Ethylene Cracker – Shanghai, China

Material Handling
- Mossgas Refinery - Catalyst Preparation Plant (including Arc Furnace and Twin Casting Machines) (± 12,000 Design Hours).
- Pretoria Portland Cement - Cement Kilns 7 and 8 Mafeking.
- Pretoria Portland Cement - Coal Handling Facility Jupiter Works.
- Northern Lime Company - Lime Kilns 6, 7 and 8 Limeacres, Kimberley.

Nuclear
- Atomic Energy Corporation - details of project classified.
Duration 6 years, 3 years of which were spent on site. ± 55,000 Design Hours.

Boilers
- Sasol Three - Boiler 9 Project (± 15,000 Design Hours).

Mining
- Palabora Underground Mining Project - Control Systems Engineering - Site Based.
- Palabora Mining Company - CAD Applications - Site Based.
- Anglo American Corporation - Intelligent Engineering Systems.

Steel/Smelters
- Mozal Smelter Project - Mocambique - Chief designer Carbon Plant
- Pre-Commissioning/Commissioning Team

SUMMARY OF EMPLOYMENT
July 2003 to present AMEC
Secco Project
Ethylene Cracker - Caojing, China
Lead Designer (Intools Specialist)
Control Systems

Jan 2003 to July 2003 John Brown Hydrocarbons Limited, London
Exxon Projects –
Sakhalin Island Crude Oil Export Terminal/Pipe Lines/Dekastri Harbour
Senior Designer (Intools Specialist)
Control Systems
Remote Intools operation – Database in Houston

Jan 2000 to Dec 2002 FLUOR DANIEL NETHERLANDS
DSM Projects
Geleen, Netherlands
Senior Designer
Control & Instrumentation (INTOOLS)

1998 to 2000 MOZAL SMELTER PROJECT (EMS)
Mocambique
Chief Designer - Carbon Plant
Control Systems Pre-Commissioning/Commissioning Support

SULPHOS PHOSPHORIC ACID PLANT (EMS)
Richards Bay – South Africa
Chief Designer - Phos. Acid Plant
Control Systems (INTOOLS)

1996 to 1998 PALABORA UNDERGROUND MINING PROJECT
Control Systems Engineer - Site Based – South Africa.

1996 AUTOPLANT P&ID AND INSTRUMENTATION APPLICATIONS
Authorised International Rebis Consultant
Applications, Training and Customisation

1995 ANGLO AMERICAN CORPORATION OF SOUTH AFRICA
Engineering and Design Systems Applications Consultant.

1986 to 1994 FLUOR ENGINEERS S.A. (PTY) LTD
Johannesburg, South Africa
Chief Designer - Control & Instrumentation.
Applications Specialist.

1980 to 1986 ENGINEERING MANAGEMENT SERVICES
Johannesburg, South Africa
Principal Designer - Control and Instrumentation Department.

1974 to 1980 PRETORIA PORTLAND CEMENT COMPANY LTD
Designer - Control Systems / Electrical Department.

1971 to 1974 NORMAN CLARK ASSOCIATES, Dundee Scotland
Apprenticeship - Industrial / Commercial Design.

DETAILS OF EMPLOYMENT
AMEC, Shanghai China
(July 2003 to present)
Secco Project
Ethylene Cracker - Caojing, China
Senior Designer (Intools Specialist)
Control Systems

JOHN BROWN HYDROCARBONS, LONDON
(Jan 2003 to July 2003)
Exxon Projects – Sakhalin Island Crude Oil Export Terminal/Pipe Lines/Dekastri Harbour
Senior Designer (Intools Specialist)
Control Systems
Remote Intools operation – Database in Houston

FLUOR DANIEL NETHERLANDS
(Jan 2001 to Dec2002)
DSM Projects
Geleen, Netherlands
Senior Designer (Intools Specialist)
Control Systems
During this contract with Fluor I set up and ran 1300 loop diagrams with new Intools\Autocad templates.
Pre-Commissioning/Commissioning Site Support

ENGINEERING MANAGEMENT SERVICES/MURRAY & ROBERTS INTERNATIONAL
(1998 to 2000)

MOZAL SMELTER PROJECT (EMS)
Chief Designer - Carbon Plant
Control Systems (Intools)
Pre-Commissioning Site Team

SULPHOS PHOSPHORIC ACID PLANT (EMS)
Chief Designer - Phos. Acid Plant
Control Systems (Intools)

PALABORA UNDERGROUND MINING PROJECT
(AUG 1996 - 1998)

Control Systems Engineer - Site Based.
- P&ID development with Process Engineer.
- Development of Control and Operating Philosophies.
- Specification of Instruments.
- Preparation of Instrument Data Sheets.
- All design documentation and drawings.
- Material Take-Off.
- Preparation, Issue and Adjudication of Enquiry/ Purchase Order/Tender Documentation.
- Issue of Site Instructions to Installation Contractors.
- Preparation and Issue of Site Orders.
- Control of Site Construction/ Installation/ Commissioning Groups.
- Liaison with Head Office Design Groups/ Planning and Scheduling Groups.
- Administration of Loop Check Packages/ Hand-over Documentation.
- Mark-up of Plant Documentation to "As Built" Status.

AUTOPLANT P&ID AND INSTRUMENTATION APPLICATIONS
(JAN 1996 – AUG 1996)
Authorised International Rebis Consultant
Applications, Training and Customisation for South African Autoplant Users

ANGLO AMERICAN CORPORATION OF SOUTH AFRICA (JAN 1995 - AUG 1995)
Engineering and Design Software Systems Applications Consultant.
- Definition of department and system requirements.
- Development of system specifications.
- Development of measurement criteria to apply to potential systems.
- Evaluation and recommendation of suitable systems for hands-on testing.
- Liaise with system developers and suppliers.
- Hands-on evaluation of shortlisted systems by means of a Pilot Project.
- Preparation and presentation of an evaluation report to the client's senior personnel.
- Preparation of system implementation procedures.
- Preparation of training manuals and training schedules.
- Training of Control and Instrumentation engineers and designers on the selected system. (30 personnel)
- Provide feedback to the client Senior Divisional C & I Engineer.

FLUOR ENGINEERS S.A. (PTY) LIMITED (1986 - 1994)
Chief Designer - Control Systems.
- Responsible for control of all design, draughting, computer aided draughting and checking.
- Productivity and discipline of design personnel.
- Preparation of design and installation specifications.
- Preparation of quotation enquiries and purchase orders.
- Preparation and control of construction and installation contracts.
- Progress reporting and manpower planning.
- Inter-discipline liaison.
- Clerk of Works Site / Design Office.
- Material take-off and ordering of bulk materials (including use of computerised material management system).
- Vendor inspections.
- Estimating.
Design included:
- Process and Mechanical Flow Diagrams (including use of ILG/Facet).
- Loop Diagrams (including computer generated Loops - ILG/Facet).
- Instrument Installation Indexes (including ILG).
- Instrument Locations.
- Cable Routing.
- Cable Schedules.
- Field and Control Panel Design and Wiring.
- Transducer Rack Design.
- Signal Conditioning Panels.
- Instrument Installation Details.
- PLC I/O Allocation and Wiring.
- DCS Slot Allocations and Wiring.
- Instrument Air Supplies.
- Schematic Diagrams.
- Power Distribution.
- Wire and Tube Lists.
- Hazardous Area Classification Drawings.
- I/S Loop Certification (preparation for SABS).
- Drawing Register.
- Site Surveys.

Application Specialist
- Set up, configuration, application and customisation of Engineering and Design Systems and CAD packages.
- Training of project teams to operate systems and packages.
- Preparation of training manuals used to train personnel to specific project and department standards.
- Preparation of system standards and operating procedures.
- Customisation of data report formats to extract details of:
-PLC/DCS I/O requirements.
-Data Sheet requirements.
-Purchase Order shortages.
-Instrument Manufacturer & Model No. Statistics.
-Intrinsic Safety Certification and Documentation requirements.
-Installation quantities for inclusion in Construction Contract Tenders.
-Extraction of Instrument, Cable, Junction Box, Hook-up Material Quantities.
-Engineering and Design Man-hour Budget Management Reports.
-Drawing Register Control.

- PC based Engineering and Design Instrument Indexes.
- Intelligent Loop Diagrams (including cascade loops comprising up to 20 I/O on a single loop). Projects with up to 5000 intelligent loop diagrams.
- Intelligent Wiring and Connection Schedules.
- Downloading of Instrument Tag No's from P&ID's to Instrument Index databases.
- Interfacing with engineering and design personnel to obtain database information requirements, and issue of database information to assist those personnel in completing their scope of work on schedule.
- Organisation of network directories governing package availability's and access to project personnel.
- Evaluation of new packages.

PROJECTS
Genref SRC Project (Applications Specialist).
Genref RCR Project Phase II (Chief Designer).
Air Products Retrofit - Newcastle (Chief Designer).
Synthol Catalyst Preparation Plant - Mossgas Onshore Refinery (Chief Designer).
Gasification Conceptual Study - Sasol One Modernisation (Chief Designer).
Arge Synthesis Plant - Sasol One Modernisation (Chief Designer).
Boiler No. 9 - Sasol Three (Chief Designer).

ENGINEERING MANAGEMENT SERVICES (1980 - 1986)
Principal Designer - Control Systems.
Greenside Project - Pelindaba/Valindaba. (Details Classified)
Design and co-ordination responsibilities as above.
Two years spent in site drawing offices as Chief Checker (± 20 Designers).

PRETORIA PORTLAND CEMENT COMPANY LIMITED (1974 - 1980)
Electrical and Control Systems Designer.

Projects:
- Cement kilns 7 and 8, Mafeking.
- Lime kilns 6,7 and 8 Limeacres, Kimberley.
- Lime Load Out Station Limeacres, Kimberley.
- Coal Handling Facility Jupiter Works, Johannesburg.
Design and Draughting.

NORMAN CLARK ASSOCIATES (1971 - 1974)
Industrial Design.
Apprenticeship, Dundee Scotland.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7201 to 7250 of 10917)

Go to Search Parameters...

Brief Description

Strong knowledge and experience in banking, finance and customer service.

B.E Mechanical With 0-1 Year Experience in Chemical & Fertilizer Industry

Electrical Project/Construction Management

I have completed diploma in mechanical engg with first class and also have 8yrs exp in the field of engineering and manufacturing

25+ years experience as Operations Manager in the Resources and Oil & Gas Sectors. Formal qualifications in Engineering and Business.

A competent leader with 3 years of experience within HSE Management in the upstream and downstream Oil & Gas Industry

Seeking a challenging full-time position as an engineer in a dynamic oil & gas organization

Experienced Contracts Manager professional with CLA credential, MBA (December 2009) and proven track record with more than 15 years of business expertise in financial analysis, logistics, engineering, FAR knowledge, strong legal background, and project management.

Technician Mechanical Maintenance

I have a good experience working as Wellsite Geologist for both exploration and development wells (vertical & horizontal). I am familiar with field geological operations and possess good expertise in the Winlog software program. I have good computer skills and fluent in written and spoken

I have Bachelor Dagree in Chemical Technology and have 6 year working experince in refining field in operation

Objective A challenging role in an organization which offers tremendous growth potential and wide exposure to the latest technologies fully utilizing my skills. Work Experience 2+ Years experience in System Analysis and Network Engineer. 4+ Years experience as Materials Engineer

NQF, National Qualification Forum, Qualified as Production Artisan Grade 4

Chemical Engineering Degree and 6 years in Cathodic Protection.

20+ years in Control Systems Engineering/Design. Experienced Intools user.

Having five + years experience in continuous process plants as a senior engineer.

Free ! YOUNG POTENTIAL in FINANCE & ADMINISTRATION

working with Siemens for the past five years in Piping Design & Engineering. expert user in PDS also work on Stress analysis(Static & Dynamic) of various piping sytems using "Caesar". been to Design/ Site offices abroad in Germany & Kuwait.

MSc Chem. Eng. Wide experience in project management, developing, supporting, monitoring, analyzing plans for projects. Develop budgets, define targets for expenditures and oversee execution. Assist management monitoring projects execution. Integrate individual reports to a global report.

Seeking for opening in QAQC and Inspection

Objective: I am seeking a full-time mechanical engineering position. I am looking for a position that will challenge and augment the skills and knowledge I have obtained while providing valuable service to the company.

I am an experienced design engineer working on an oil and gas related projects, worldwide. I am proficient in AutoCAD 2002, Microstation, 3D Plant Design Systems, Smart Plant Review, and INtools.

I am experienced in construction works for oil&gas industry. Have good working knowledge of standards like EEMUA 158, AWS D1.1, ASME Sections VIII, IX and B31.3, RMRS Rules for Construction of Ships, etc. Proficient in planning & scheduling of construction projects using Primavera & MS Project.

Ideally I would like to gain employment within my trade as an electrician, however I am willing to start at the bottom and work my way up within your organization. I am therefore looking for a job as a Roustabout.

OBJECTIVE : Geological Engineer - Over 6 years‘ geological engineering experience - Extensive knowledge of geological formations - Educational background in geology engineering - Able to self-train on new geological software - Responsible, team player, hard working

Cost/Planning Engineer with a Mechanical Engineering background and specialized studies. 5+ years experience. Proven outstanding performance under extreme unfavourable conditions and security threats. Proficient in Primavera, MS Project, spreadsheets. Other :MS e-enterprise, Access and VB

Science major with sales negotiation experience

OBJECTIVE To acquire an entry-level position in petroleum or a research position in or relating to mechanisms of asphalting instability in crude oils, interfacial properties of natural surfactants.

To utilize my acquired background in the field of Electrical Engineering as well as my higher education in Engineering Management and to perform quality work in a professional career related to my technical skills

Hands on experience in Installation, Maintenance of Computer controlled Machines, Video Monitors, Indoor & Out door Ac / Dc Motor Controlled Amusement Equipments, Touch Screens, and Power Supply, and Also Maintain NT Server and 10 clients & Hands-on Experience in Servicing Laptops etc.

A progressively challenging position in the area of Instrument Engineering, where past experience and proven abilities can be fully utilized. The preferred position would provide an opportunity for continued professional growth and advancement.

Having acquired skills in Geology and Applied Geophysics, I will like to work in a challenging Oil and Gas Environment.

Geophysicist Having deep knowledge in seismics and data processing. Also knows gravity and magnetics.

As I am having good experience in Electrical field, working as a Electrical Technician for a contractor employee in Kuwait National Petroleum Company, Mina Al Ahamadi Refinery

I am a well experienced process engineer in oil & gas industry. I am happy to work abroad for long durations. I am an Australian citizen presently working in Perth, Australia. I have a solid 12 yrs experience in oil & gas process design.

Management, Logtics, Cost Control, Sales

Highly motivated individual with strong FEA experience. As a stress analyst, I enjoy analysing the products that designers design, highlight potential problem areas and ultimately help product development by saving cost. My aim is to make product more durable and cost effetive.

I am a qualified geologist who graduated from the Ecole Nationale d’Ingénieurs du Mali (ENI) in 2001

qulification;having my 2years of industrial training instuite(iti),work exp; 8 years in refinary& 2 years in power plant having a capacity of (300*8 )MW

Electrical & Instrument Designer

I am a Petroleum and Natural Gas Engineer having an MSc degree in Petroleum and Natural Gas Engineering from Istanbul Technical University, Istanbul TR.

I did my M.Tech in applied geophysics from IIT Roorkee,india which is the one of the best technical institute in india.in this course I learn seismic prospecting, well logging and non - seismic methods. I did my summer training in O.N.G.C. Dehradun, India and also did industrial training in O.N.G.C

Dedicated and highly motivated instrumentation & control engineer

Have worked in oil industry for 4 years doing fracking, cdl driver,acidizing .

Production Operator

HSE officer with 6yrs of exp. having Nebosh, Iosh, Osha etc.

I have more than fifteen years of progressive professional experience and have matured from a background in material / inventory control, coordination, and warehousing techniques for oil and gas maintenance, construction and manufacturing industries.

Oil and gas production operator level 1

Over 18 years of extensive experience Maintaining a Safe Work Culture, Budgeting, Strategic planning, Policy Development/Implementation, Finance/Leasing, Fleet Maintenance/Management

Strong motivation for deepening of knowledge on engineering geophysics, both theoretical and practical. Willing to travel, strong and stable character, able to work in long shifts and under pressure. Interested in learning new technologies. Perfectionist in problem solving

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 [ 145 ] 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out