Resume - At Present im a lead contol room operator of a 400 mmcf gas processing plant in ...

Misco Jobs

Resume #68227

CONTACT INFORMATION:
View contact information...

Objective: Senior Plant Operator/Technician

Experience:

1978 worked 6 months Trend construction building a gas processing plant (laborer, Welders helper)
1979 worked 1 year for Texas Oil and Gas corp. as a utility man (maintenance and loading gas transports)
1980-2002 I worked for Warren Pet. A division of Gulf Oil, Chevron, Dynegy Corp. for approximately 23 years. My position there was Engine Operator, Plant Operator.
Crested Butte Mountain Resort. My position there was maintenance Technician. Job duties include electrical wiring of motors, installing lights, Installing and wiring HVAC units, Plumbing and electrical troubleshooting of appliances, carpentry, repair Boilers and installation, pool heaters and pool filter maintenance, commercial laundry repair, ice machine repair.
2002-2005 Maintenance Manager for a 180 unit apartment community in Mesa Arizona, performing all aspects of Maintenance for the complex.

The Sweet Gas Processing Plant that I worked at for Texas Oil & Gas was located in Avinger TX and had a capacity of 100 mmcf Cryogenic Plant.

The Sour Gas Processing plants that I have operated had a capacity of 45 million cubic feet per day Cryogenic, NRU, Fractionator Warren Pet. Como TX Plant.
and 75 mmcf Plant (, Dynegy Lovington NM Saunders Plant)

2005- to present
I am working for WILLIAMS COMPANIES, INC. at the Echo Springs Plant as an Upgrade lead operator. I operate three TXP trains with a total capacity of 400 mmcfd
We have 8 solar turbines here in the plant and 5 Solar turbines in the field.
I perform all plant control here as the plant Lead Operator.

I operated a three fan cell cooling tower
11 gas compressors (Cooper Bessemer, Ingersolrand, White Superior, Clark, Waukeshau)
4 generators for plant power 2000 kilowatts capacity (Ingersolrand PSVG-13,PVG) Operated an amine gas treating system (MEA,GAS SPEC-CS1) Operated a (SRU) Sulfur Recovery Unit (Recycling Selectox, and Two Bed Claus) Operated a (NRU) Nitrogen Rejection Unit (Cold Fin Plate Exchangers) Pumped and monitored a Waste Water Disposal Well
Field Booster compression control and monitoring
Coordinate call outs for field booster trouble
Vacation Scheduling
Worked rotating shifts for 22 plus years
Daily plant production report
Residue gas flow control (Elpaso, NGPL)
compressor maintenance
Gas fired heaters and boilers
75 mmcf. Cryogenic Plant
Control Room Operator
Operated Plant by myself on 12 hr. rotating shifts
Iron Sponge gas treating
Plant safety and environmental inspections
Lab testing-boiler water samples, treated water samples amine testing
Gas Chromatograph, testing gas sample compositions
Pipelined all product to Mt. Belvue Fractionator
Operated a Fractionator, Propane, Butane and raw gasoline
Glycol Dehydrator
Mole Sieve Dehydration
Worked 22+ without a lost time accident
Loaded and unloaded LNG transport trucks
Wonderware Control Operating System
Pipeline Operation and Pigging
Pipeline and well monitoring
Total flow metering and Circular flow charts
Pipeline Heaters and Salt bath heaters
Wellhead Seperators

Education Graduated High School From Sulphur Springs Texas in 1978
Attended some college at East Texas State University

Interests: Carpentry, computers, motorcycles, horseback riding, Hunting and camping

Special Training Industrial Fire Training at Texas A&M, went through this training three times.
Technical procedure writing
Compressor Maintenance
First Aid and CPR
Team Leader training (team concept)
Asbestos training
HAZCOM training
H2S safety
Scaffolding training
Personal fall protection training
Fire Safety training
PPE (personal protection training) training
Electrical Safety training
Bloodborne Pathogens training
Confined Space Entry training
Hazwoper Training
Work Order generation (Maximo, Empac)

Basic Skills Arch welding, cutting torch and pipe fitting
Plumbing PVC and copper piping (sweating Copper Pipe)
Electrical wiring such as installing fluorescent light fixtures, hot water heaters and dish washers
Automobile mechanic installing engines and transmissions
Water softener operation
Computer skills - Word and Excel
Laying floor Tile
Trim carpenter
Painting
Rebuild and repair small engines such as lawn movers weed eaters, chainsaws
Work order generation (Maximo, Empac)
Small dozer operation
Backhoe operation
ATV operation
Chainsaw operation
Mule/Horse packing
Professional Hunting Guide
Cement forming and finishing
Pouring foundations and sidewalks

References:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1151 to 1200 of 10014)

Go to Search Parameters...

Brief Description

A competent Fire Expert, with an extensive Fire & Safety background, and knowledge in corporate guidelines. A proven professional and Technical Communicator with expertise in Loss Prevention, Safety & Fire Protection support, safe work practices, fire systems and design reviews. He has been accounta

Petrophysicist, 11 years experience. Strong well log interpretation in vertical and horizontal wells. Thorough knowledge of Wireline / LWD tools. Experience in Clastic and Carbonate reservoirs. Expertise in core-to-log reconciliation and neural networks. Co-author on two books on well-logging data a

More than 20 years land mark f/R/b to tool pusher

27 Years Crude Oil Refinery and Manufacturing experience

Free! Senior marine officer with extensive experience in the offshore oil & gas industry,Currently shorebased marine regional manager

At Present im a lead contol room operator of a 400 mmcf gas processing plant in wyoming

Degree in Instrumentation, National University Indonesia, graduated 1993. 14 years Experiences in Oil & Gas Business as an Instrument engineer.

Inspection head in ExxonMobil Campana Refinery Argentina. 26 Years of experience in fixed Equipment Inspection. In charge of all Fixed Equipment Inspection and QA/QC including Contractor Management, new hired Inspector training, Technology improvement and cost control. Expertise in Coke Drum Inspect

Instrumentation ICSS commissioning specialist

Experience Summary : Works in Construction Project 15 years & Works in Travel & Tour 4 years

SPECIALIST IN PRECOMMISSIONING, COMMISSIONING AND START-UP

Twenty years experience in Petrochem/Oil and Gas industry. Looking for international assignment.

CONTROLS AND SOFTWARE SPECIALIST

My experience includes expert-level competencies in Mechanical Design Engineering, in Piping Materials Specification, in Pipe Stress Analysis and in Piping Items & Mechanical Package Procurement for Refineries, Off-shore Oil & Gas Platforms, Petrochemical Complexes, Chemical & Pharmaceutical Plants,

My skills are on 3D seismic pre - planning using OMNI software, SPS – Shell-processing support for survey data/coordinates and post acquisition quality control of seismic records. Has the ability to learn other G&G software’s and Maters degree in Exploration Geophysics

I am gas process engineer I have 12 years experience in gas and oil processing also i have 3 years gulf experience

INSTRUMENT ENGINEER

I am a career driven individual with desire and ambition to succeed, grow and develop with a dynamic and professional company like yours, one that can afford good prospects coupled with challenge for professional achievement and satisfaction.

Senior Reservoir Engineer with 20 years experience in Reservoir Simulation and reservoir management. Very good experience in Well Test Analysis, reserve estimates, material balance and enhanced oil recovery schemes.

I am a Civil Engineer w/ 28 yrs experience in oil & gas, infrastructure and gen. const

Graduate Diploma in Petroleum Engineering

I have been working for the past 22 years in project controls / planning, construction and maintenance disciplines in Oil & Gas, LNG, Fertilisers, Petrochemicals, Power and Refinery. I have a good knowledge of International Standards & working practices. Thorough knowledge of Primavera (P3).

Good communication,Self motivated,Analytical and Team player. B. Engr. Elect/electronic

Telecom Engineer transmission speciality more than 16 years experience

Strong management professional who enjoys growing business and improving performance.

18 years experience: design of suppression and alarm systems, manage design, review P&ID for HPR chemical plants, CFD modeling, nuclear industry FHA, performanced-based: (fire exposure, fire endurance, smoke control) designs, firefighting experience 5 years

Advanced engineering education with a MS degree in Mineral Economics. Emphasis in Financial Risk Management, Advanced Mineral Asset Valuation using MonteCarlo Simulation and Option Pricing Theory, Investment and Portfolio Management, Bilingual Spanish-English

A highly motivated multi-lingual manager seeking a challenging position overseas. I am computer literate with experience using Microsoft Office applications. I have excellent oral and written communication skills. I have worked for a company and clients with strong safety-cultures.

Position Objective: Senior Managerial position in electrical or electro-mechanical industrial firm. The aim is to bring the facility’s productivity, profitability and quality up to a highly recognized standards utilizing personnel, technology & procedures.

Lean Manufacturing, Manufacturing/Business Process Improvement, Value Stream Mapping, Factory Layout Design/Cellular Manufacturing, Process Mapping & Analysis, Performance Measurement, MRPII/ERP, Operations Management, Project Management, Cost/Benefits Justification.

I am an Indian national presently seconded to Brunei Shell Petroleum, having more than 13 years of Experience in the field of Oil, GAS (Onshore and OFF shore), petrochemical plant and project experience in the field of Reliability, Inspection, Construction & QA/QC, Pipeline, Piping.

I am working from 1999 to peresent as drilling supervisor in oil and gas fields in offshore in gulf and onshore in south of iran in exploration &new well&workover wells. I have IWCF certificate.

Experience well test engineer

OIL & GAS COMMISSIONING FOR PROCESS PLATFORM / DRILL SHIPS LIKE : MOSVOLD-1/2

I used to work in PT Weatherford Indonesia as QHSE Manager and PT Akzo Nobel Car Refinishes Jakarta also was a QHSE Manager. My main job basically is to help the company to have management system infrastructure in place and as a result to achieve ISO-OHSAS.

With Thirteen years experience for working on different types and application on line gas and liquid analyzers and gas Chromatographs all over India, Saudi Arab, Qatar in most of the industries like Refineries, Offshore sites, Fertilizers, Steel plant, Petrochemical plants etc.

Environmental Health and Safety Consultant with overseas experience and extensive background in plant constructions, plant pre-commissioning and commissioning projects, plant expansions, major repairs, routine maintenance in refinery complexes, upgraders gas complexes and power plants.

(i) 8 years experience in Contract Management in a corporate environment (ii)for developing and implementing business development plan in concurrence with the organization objectives connected with marketing of p

I have 20 years experience in the oilfield, to include directional drilling, consulting work, toolpushing, drilling, and roughnecking.

Construction management, supervision and engineering of mechanical and welding works e.g. oil and gas pipelines, pig-, pump/ compressor and metering stations, industrial plants, structural steel, filling stations, town gas and water distribution systems, working on oil- and gas life lines e.g. maint

17 Year expereice in Insrumentation , GE Harris, Realflex & Invensys SCADA Systems, ABB & Invensys DCS systems.

Drilling Activities: Drilling Operations: Bits, BHA, Drill String, BOP, Drilling Fluids, OBM, MWD, Wireline Logging, Conductor, Surface, Intermediate & Production Casing, Primary Cement, Wellheads. Offshore, Inland & Land Well Drilling Experience. Well Control. Drilling Management: Well Prognosis, A

Mechanical engineer in Repair and maintenance of Rotating equipment such as Pumps, Compressors(Reciprocating and Screw types), Gas Turbines(Solar Centaur), Air Fans and Blowers

FROSIO Certificate level 3. 28 years experience in oil & gas industry as coating/insulation inspector

Consulting Drilling ,workover, ,Directional Drilling ,Mud engineer

DIPLOMA IN ELECTRONS&COMMUNICATION ENGINEER

PABX SERVICE ENGINEER

Production Engineer with 12 years of industry experience

BSc in env. MSc in safety eng.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 [ 24 ] 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out