Resume - Integrity & RBI Inspection Engineer

Misco Jobs

Resume #68314

CONTACT INFORMATION:
View contact information...

Nationality: Indian
Date of Birth: 29/05/1963

Experience: 23 Years - (14 yrs Oil & Gas + 9 yrs Nuclear Power Plant)
Design: 3 Years QA/QC: 10 Years
Commissioning: 2 Years In-service Inspection: 8 Years

Qualification & Certification:

A1- Bachelor of Engineering,
1980 – 1984 (Chemical Eng. - 4 Years), Ahmedabad, Gujarat university, India

B1- Trained in the field of 'Piping Stress Analysis' for Practicing Engineers using 'Finite Element
Method' (FEM) & SAP-IV Software at Indian Institute of Technology, IIT, Madras, India

B2- In-service Inspection (API): American Petroleum Institute, USA
1) Pressure Vessel Inspector –API 510 - Certificate ID- 26930
2) Piping Inspector –API 570 - Certificate ID – 28247
3) Aboveground Storage Tank Inspector –API 653 - Certificate ID- 28566
4) Supplemental Inspection Certification program in the field of Corrosion and Materials derived from API-
Damage Mechanisms Affecting Fixed Equipment in the Refining Industry –API 571 - Certificate ID- 29424

B3- Welding Inspection: The Welding Institute (TWI), UK
Certified Senior Welding Inspector (CSWIP-3.2), CERT No. 3153/2 Expiry date: 2010-07-07

B4- NDE: American Society for Non-Destructive Testing (ASNT), USA - exp 11/07
ASNT NDT Level-III in Magnetic Particle Testing –MT & Liquid Penetrant Testing
Methods-PT (MT & PT - Certificate No.:126347), ASNT NDT Level - II in UT, RT

B5- Quality System (QMS):
Certified Lead Auditor – Quality System (ISO-9000), Quality Management Int'l, QMI, UK

B6- HSE (HSEMS):
- Certified EMS Auditor, (Environment Management System), Quality Management International, QMI, UK
- Integrated Safe System of Work (ISSOW) (Task Risk Assessment/Energy Isolation Process /Permit to
Work) conducted by Petrofac / 'British Petroleum' at BP Sajaa Plant, Sharjah, UAE
- Approved by the Director of Inspection Department (approval date - 15/10/2005, exp.), Ministry
Of Labour & Social Affairs, UAE under the 'APPROVAL FOR THE ESTABLISHMENT IN THE INDUSTRIAL
SAFETY FIELD' - to carry out inspection of lifting equipment

B7- Offshore Survival Course:

- Sea & Helicopter Survival at Gulf Technical & Safety Training Center, Cert No: 015974 -Validity 15/08/2010

Summary of Experience:

From 11th Aug 2007 till date, 13 February 2008 (Abu Dhabi, U.A.E)
Working as 'Site Integrity Services Engineer' with ADMA-OPCO - Offshore (Umm Shaif Field) and responsible for inspection and integrity management of Umm Shaif Super Complex, Barges & Well Head Towers ( Vessels, Piping, Structures, Boat landing Fenders, Risers, PSV) using ADMA-OPCO Engineering code of practice CP-107 & CMMS (MAXIMO V5.2).

From 4th May 2007 till 22nd July 2007 (Ahmedabad, India)
Worked as 'Chief Surveyor' with TATA PROJECTS LIMITED, SBU- Quality Services and was posted as West Zone head at Ahmedabad, India. West zone Quality Services division has four inspection centers (A'bad, Baroda, Silvasa & Gandhidham) with total 50 surveyors performing 'Third Party' inspection & expediting activities for various clients in the Gujarat region (West Zone). TPL quality services division is engaged in various TPI & expediting activities covering wide range of engineering & technical areas from Wind Energy / Power / Oil & Gas sectors within the region. I resigned from the company due to inadequate business /future scope in the field of Integrity management of Operating Plants, Risk Based Inspection (RBI) & Project related activities.

From May 2005 till April 2007 (Dubai/ Sharjah, U.A.E)
Worked as 'Inspection Engineer/Senior Inspector' with Lloyd's Register EMEA for the 'Asset Integrity Management Contract' at British Petroleum (BP) Sharjah, SAJAA Plant, Sharjah, UAE
-Internal & External In-service Inspection of Static Equipments, On /Off plot piping, Above Ground Storage Tanks & Structure using NDE Visual /MT/PT/UT/RT/IR/EC/ MFL ) at BP Sharjah Co., SAJAA Plant
-Prepare WSE, Inspection Reports, incorporate & update results into Asset Integrity Management Database (CORTRAN 3.06) to help in Integrity Review and Corrosion Risk Assessment.
-Inspection of routine maintenance activities including PSV test witnessing, Leak testing, repairs as per Computerized Maintenance management Software- CMMS (MAXIMO V5.2).
-Failure investigation & NDT inspection activities on pressure Vessels, Piping Modules & Components, Tubes, Valves and Structures. Review & report all the anomalies of inspection findings.
-Developing inspection strategy for CUI (corrosion under insulation) inspection of small-bore pipe work, supports and dead legs

From June 2001 to May 2005 (Mina Al Fahal/Muscat, Oman)
Worked as 'Senior Static Equipment Inspector /Inspection Supervisor/Contract Site Representative' during Integrity Management Contract - C2K-8061(AIB Vincotte International -AVI) / In-service Inspection of E & P facilities at 'PETROLEUM DEVELOPMENT OMAN-PDO', OMAN from June 2001 to May 2005. Used Asset Integrity Management Database Software PACER Version 7 and Computerized Maintenance Management Software - SAP

From Oct.1996 to May 2001 (Doha, Qatar)
-Worked as Quality Engineer/Senior Welding Inspector during Construction of Qatar Petroleum (QGPC/
QP) pipeline projects (12 "ø, 24 "ø, 36 "ø ) from 1996 to 2001 for Medgulf Construction Co., Qatar

From May 1993 to Sept. 1996 (Abu Dhabi-U.A.E / Ras Laffan- Qatar)
Worked as Lead Inspector during Construction and Pre_commissioning of LNG / Gas plants (3rd Train LNG Project at Das Island, Abu Dhabi-UAE, Onshore Gas Development Project-OGD-545, Hubshan- U.A.E. and LNG Project at Ras Laffan, QATAR) for CCIC

From August 1984 to May 1993 (Bombay/ Baroda, India)
-Started my career after University Degree as 'Scientific Officer Trainee' at 'BHABHA ATOMIC RESEARCH CENTER –BARC', (Training School Batch # 28, 1984 -1985), Department Of Atomic Energy, Bombay, India
-Worked as a 'Scientific Officer-SD' for 'Nuclear Power Corporation –NPCIL, India' in the field of 'Design (3yrs), Field Engineering (2yrs) and Quality Surveyor (3yrs) for 235 MWe PHWR Nuclear power projects (NAPP/KAPP/RAPP)

Professional Experience:
- From 11th Aug 2007 till date (13 February 2008)
Working as 'Site Integrity Services Engineer' at ADMA-OPCO Offshore field (Umm Shaif) and responsible for inspection and integrity management of Umm Shaif Super Complex & Field which includes Vessels, Piping, Structures & PSV's using ADMA-OPCO Engineering code of practice CP-107 & CMMS (MAXIMO V5.2). There are approx. 90 Well Head Towers, Water Injection, Collector Separator, Gas Treatment Platforms, Barges which includes inlet separation, glycol dehydration. Gas/Oil is transported to Das Island for further processing by MGL/ MOL pipelines.

- Tata Projects Limited -Worked from 4th May 2007 till 22nd July 2007 as 'Chief Surveyor, Grade-SM1' and Regional head for TPL- Third Party Inspection & Expediting Quality Services. Responsible for quality improvement, training of surveyors & business development within the region at different inspection centers (Ahmedabad /Baroda/Gandhidham /Silvasa /Daman)

Employer: Lloyd's Register EMEA, Dubai, UAE -Posted at (British Petroleum) BP- Sajaa Plant, Sharjah, UAE
Position Held: 'Inspection Engineer / Senior Inspector' from May 2005 till April 2007

Major Integrity Management (IM) Activities carried out:
-Implementation of Technical Integrity Management System (TIMS) for the BP Sharjah facilities.
The following 'TIMS' documents and strategies were used that define the means by which the integrity of the static pressure systems is assured through relevant risk based inspection, monitoring and mitigation activities.
-Failures Risk Assessment, Reviews for Static Hydrocarbon equipment & piping systems, Inspection Strategy, PSV Integrity Management Strategy, Corrosion Management Strategy, Pipeline Integrity Management Strategy, Fabric Maintenance Strategy
-Development of Inspection Strategy & Integrity Reviews / Inspection Plans / Work pack/ Written Schemes of Examination (WSEs)
-Carrying out In-service Inspection of Static Hydrocarbon equipments & piping systems to assure the Mechanical Integrity / Fitness-for-Service Assessments, advising on next inspection intervals based on BP guidelines & generation of inspection records
-Maintaining & updating Database (CORTRAN Version 3.06) of all the inspection results, remaining life of components & the next inspection intervals.
-In-service inspection of pressure vessels, heat exchangers, piping, Storage Tanks, fabricated Structures & Pressure Safety Valves. Co-ordinate incident investigation (Root Cause Failure Analysis - RCFA) & advance NDE inspections like IRIS, MFL, and LRUT.
-Trained in Computerized Maintenance management Software (MAXIMO V5.2) at 'BP Sharjah Co, SAJAA Plant

Employer: AIB Vincotte International, OMAN (For PDO Contract)
Position Held: Inspection Supervisor /Contract Site Representative - From June 2001 to May 2005
Experience:
-Inspection of static equipment, on plot / off plot pipe work of 'PETROLEUM DEVELOPMENT OMAN' PDO as part of 'Operation Inspection Services' Contract no. C2K-8061 for operating oil & gas Production stations (Interior North & South Oman). Pressure Relief Valve (PRV) calibration & test witness and endorsement
-Participated in major shut down activities of 'Petroleum Development Oman- PDO' E & P facilities of interior oil / gas Production & Gathering stations (North & South Oman)
-External Inspection of Insulated Piping & Equipment (Profile RT) and dead legs to check extent external deterioration due to CUI.
-Worked on computerized database system (EPMARS, PACER and SAP) to maintain inspection & integrity of operating oil & gas piping and static equipment
-NDE report review & corrosion analysis (Remaining service life calculation based on corrosion rate).
-Maintaining equipment history file of static equipments and follow-up inspection including witnessing NDE including integrity review
-Monitoring Magnetic Flux Leakage (MFL) testing of flow lines from wellhead to the inlet manifolds & Oil storage tank bottom plates
-Monitoring and controlling inspection site activities and inspection team.
-Review of on plot piping UT, off plot flow lines MFL/UT/RT and Static equipment UT/RT inspection reports.
-Responsible for maintaining and implementing contract HSE MS system by participating Quality & HSE MS audits.
-Used In-service Inspection codes & RP's such as API 510, API 570, API 653, API RP 572, API RP 576, API RP 580, ASME Section VIII Div.1 (Construction Code), SHELL-DEP standards and other procedures for inspection of Oil & Gas Exploration & Production facilities. Trained in the field of 'Integrity management' using PACER version 7 and in the field of 'Asset Management, Planning & Execution' using SAP at 'PETROLEUM DEVELOPMENT OMAN-PDO'
HSE Training attended -H2S TRAINING (Awareness & use of breathing apparatus- BA set), PERMIT TO WORK SIGNATORY (Applicant), ROAD SAFETY TRAINING (Black top road & Graded road defensive driving skill), FIRST AID COURSE (Basic life support), JOB HAZARD ANALYSIS (LXE 101), Petroleum Development Oman (PDO), National Training Institute (NTI), ENHANCED SITE SUPERVISOR WORKSHOP (ESSW), SUPERVISORY SAFETY, INCIDENT INVESTIGATION AND REPORTING (LXE 032) at Petroleum Development Oman
Employer: Medgulf Construction Co, QATAR
Positions: Senior Welding Inspector/ Quality Control Engineer -From Oct 1996 to May 2001
Experience:
-Prepared Quality documentation for ISO-9000 implementation including internal audits.
-Prepared work procedures and participated during Tender stage of pipeline projects (QGPC/QP)
-QA/QC activities during construction of Oil/Gas Pipelines & Oil storage tanks.
-Involved in NGL-2 plant shutdown (GTC/103/98, Messaid, QGPC) activities including cleaning, visual inspection, welding, Heat treatment, testing, painting, insulation and box-up. Painting and coating inspection of Tanks and pipelines
-Review, approval and witnessing NDT procedures (MT, RT, PT, UT) of NDT subcontractor.
-Interpretation of weld radiographs of on plot piping and pipelines (36"Ø, 24"Ø and 12" Ø)
-Lifting equipment inspection (Appliances & gears) including preventive maintenance auditing at equipment workshop.
-Quality control at fabrication workshop including piping spool control and welder qualification.
Employer: Consolidated Contractor's International Co. (CCIC), UAE & QATAR
Positions Held: QC Inspector /Lead Quality Inspector from May 1993 to Sept 1996
Experience:
-Control & monitoring of welding inspector's activities at LNG project at Ras Laffan, Qatar.
-Visual control of field welding and witnessing pressure testing and pre-commissioning activities during construction of Third LNG Train project at Das Island, Abu-Dhabi. -U.A.E. & construction of Onshore Gas Development Project (OGD) at Hubshan, Abu-Dhabi, U.A.E.
-Quality control activities at ' Upgrading compressor facilities' ( UCF ) project at AMOCO plant, Sharjah, U.A.E. including Interpretation of weld radiographs & NDE coordination with client
-Preparation of ITP, mechanical line check, Test packages and witnessing pressure testing of pipe works

Employer: Nuclear Power Corporation of India Ltd. (NPCIL)/Department Of Atomic Energy (DAE), India
Position Held: Scientific Officer-SD from August 1984 to May 1993
Experience:
-Completed One Year Scientific Officer Training (BARC Training school, Batch-28, 1984-85) at 'Bhabha Atomic Research Center' BARC, Bombay, India
-Worked on 'Finite element method' FEM for Piping Stress Analysis considering dead weight, thermal and seismic loading of Moderator system piping, Reactor Process Group. Trained at 'Indian Institute of Technology' IIT, Madras for Piping Stress Analysis incorporating Static & Dynamic Loading using 'Structural Analysis Programme' (SAP-IV)
-Participated in Construction & Pre_commissioning activities of Pressurized Heavy Water Reactor (PHWR) at 'Narora Atomic Power Project' (NAPP) and 'Kakrapara Atomic Power Project' (KAPP).
-Field engineering activities at nuclear power sites including vibration measurement and piping support design
-Trained at 'Rajasthan Atomic Power Station- RAPS' for 'In-service Inspection' of piping and static equipments
-Worked as a Quality Surveyor and carried out inspection activities at supplier's work sites.
-Review of QC Plan, NDT Procedure and witnessing welder qualification, Destructive and Non-Destructive Testing
-Final inspection including QA/QC documentation review/approval at vendor's work place

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2401 to 2450 of 10018)

Go to Search Parameters...

Brief Description

Internationally Experienced Heavy Equipment Mechanic - Workshop Supervisor

20+ years shipbuilding and offshore piping and ventilation routing.

Network/System Administration & Support, Computer/Technical Support Specialist

A highly determined and skilled Mechanical Engineer with over 15+ years of overseas and in country experience in performing Piping Construction Supervision, in Oil/Gas process plants and pipelines projects too.

Engineer / MBA with 17 yrs exp in oil & gas, LPG Industry

Seismic Analysis: AVO, spectral decomposition, Seismic Inversion, attribute analysis, Shallow Hazards Analysis, Geopressure.

Self motivated and experienced sales & marketing manager that always gets results

Over 30 year’s professional inspection experience in the petroleum refining, chemical process and electrical power generation industries. Extensive experience performing American Petroleum Institute 510 inspections on pressure vessels and American Welding Society Certified Welding Inspec

Quality Specialist experienced in Quality Management System, being aware of specific Inspection Techniques, including NDT Techniques and offering over 25 years experience in QA/QC environment acquired in Mettallurgy and Construction (Prestressed Concrete Cylinder Pipes and Oil&Gas Inst.)

30+ years petro=chemical/construction QA/QC experience

Integrity & RBI Inspection Engineer

I've been 18 years experience in Petrochemical and Oil&Gas and my position now is Operation Foreman for Petrodar Operating Company in Republic of Sudan in Oil & Gas company. My responsibilities are to manage the operation of crude oil production which is daily capacity 200,000bbl/day.

I am a B.Tech degree holder in Instrumentation passed out from Madras Institute Of Technology, Madras, India and I am having Sixteen years of experience in the field of Instrumentation in maintenance, construction, commissioning and design in petrochemical, refinery, power plants

IT specialist, professionally qualified in Management and Computers(M.B.A Information Systems, Masters degree in Computers, Bachelors degree in computers) with 9 years of proven hands-on technical and management experience.

Over 15 years of successful consultative sales experience in both the software application, enterprise level solution and service markets. Sales, sales management and business development positions held with a wide range of technology related and innovative solution based organizations.

MS in Civil and Mechanical Engineering, in Alaska, Russian and English language, experienced in Numerical Wave Modeling, Coastal Engineering, Hydrographic Survey, adaptable to changing projects and work schedules and have a proven ability to quickly train on different subjects.

•Engineering, Project Management, Construction Management, Cost Control & Sub-Contract Co-ordination •Oil & Gas, Petro-chem, Cross country Piping •Shutdowns/ Tie-ins •Equipment Installation/ maintenance and commissioning •Structural Fabn & Erecn •Manpower and Resources Planning

I have been working in the UAE since October 2001 as Mechanical Maintenance Supervisor/Commissioning Engineer in the Oil/Gas and Power Industry. Prior to that I held senior positions in the Military as Ship's Chief Engineer, Engine Room I/C, Instructor and In charge of training.

I have passed through the whole production system, as production tehnologist and production supervisor

Level Five Ticketed Jouneyman Well Test Supervisor

Field service engineer for gas turbines and generators. Controls and electrical studies background. Working experience on several fields (construction, refinery, maitenance and operation)

Document controller with a total experience of more than 6 years. More than 3 years of experience in documentation using SAP EDMS in a Petrochemical company in Saudi Arabia.

Competent Project Controls specialist with Estimating, Claims Management and Risk Management skills. Experience spans 35 years in industries including Nuclear, Fossil and Hydroelectrioc power, Oil and Gas, Refinery and LNG plants. Multi-discipline estimating skills at all levels from FEL onwards.

Instrumentation & Control Systems Engineer: Honeywell TPS and ABB Infi-90 Open DCS(Distributed Control Systems), Triconex and ICS Triplex TMR PLC(Programmable Logic Controller) and Process Control Instrumentation.

Project handling and management as piping engineer

HSE / SAFETY SPECIALIST

Structural engineering, Specialised design engineer in oil & gas, industrial, commercial & residential structures, Holds a Postgraduate Degree in Civil Engineering with Specialisation on Structural Engineering

My skills are Electrical, Hydraulics and Pneumatics.

i am a geologist with 9 years experince, i have an experice with some geological softwares like Gravitas, powerlog, winlog, CPS3, stratlog and OFM, i did a supervision for mulogging, wireline and LWD jobs,

Reservoir Engineering/Simulation, Software development, Problem Resolution, Customer Service

CSWIP 3.1 Welding Inspector & International Welding Engineer

Worked for a leading group of manufacturing companies in kuwait as store incharge, imports purchase officer, iso 9001 internal auditor for differenct periods of time. Presently working as Quality Inspector in Inward section for ADGAS LNG manufacturing company in offshore Abu Dhabi

Procurement of All Electrical & Instrumentation Items

22 years of overall experience in Oil & Gas Industry in Operations, Project Management, Subsea Works, Facility Engineering, etc.

Over 10 years of experience in the field of Inspection/Corrosion/Quality and Welding in Indian Oil Corporation Limited (Haldia Refinery); currently serving as Deputy Manager, Inspection Department at Haldia Refinery, IOCL

6 years as process operator, 5 years as chemist. 1 year as comissioning technician,formation in DCS (distributed control system)Yokogawa

good experience in mechanical oil and gas equipement

Machanical engineer as 14 years exprience in manufacturing of cathodic protection anodes ,design and manufacturing of electrochlorinators and special metal fabrication

9 and half Years of working experience in Petrochemical Refinery and Oil & Gas Production / Processing Plant's Instrumentation field (Reliance petroleum Ltd. India, Petroleum Development Oman (Shell-Oman govt joint organization), and Ras Gas-Qatar) as Maintenance Foreman/Technician-Analyzers.

8+ years of work experience in Project controls, planning and cost engineering in the Owner/operator as well as EPC role with the most recent being with Colt Worley Parsons Eng. Earlier to that I have another 7 years of experience in Electrical engineering design discipline with Stork Comprimo .

Chemical Engineer with 10 years experience working with Reliance Industries Ltd

Skills -operator rotary, derikk,mecanic pump hidraulic fluid,electrical -electronic

„X Expertise in oil & gas/petrochemical, onshore piping and offshore top side piping.

A highly qualified and skilled Reservoir Engineer with over 7+ years of Domestic and International experience for the long-term management, development and optimization of large, mature fields and associated satellites.Expertise in Production/Petroleum and Reservoir Engineering particularly (expe

Extensive Work Experience

Fully qualified landman with 27 years of experience, in all aspects of the industry

Over 10 years of experience in the field of Industrial Automation covering Conceptual Design, Detailed Design, Software coding and other Engineering services as applicable to Oil & Gas (onshore & offshore) projects and Utility projects.

34 Years of Inland and Offshore Inspection and Project Co-Odination

Fourteen years experience in E&P oil industry. Good knowledge in drilling and production engineering. Extensive experience in well engineering operations in Completion, clean-up, DST, Stimulation, Coil-tubing, Logging, Well survey etc. Good skill in planning, organizing, communicating, interpersonal

An experienced Offshore Procurement Lead

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 [ 49 ] 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out