Resume - Experienced chemist with over ten years working in EOR/IOR projects associated t...

Misco Jobs

Resume #68383

CONTACT INFORMATION:
View contact information...

KEY COMPETENCIES

*Petroleum Laboratory management
*Setting up, adjusting and operating laboratory equipments
*Control processes in laboratory and bench scale
*Special and conventional core analysis. Coreflooding Studies
*Water/Gas and chemical flooding to IOR/EOR projects.
*Formation Damage and Heavy oil enhancing
*Strong Knowledge of Organic Chemistry
*Chemical formulations development
*Physical chemistry of polymers & surfactants
*Technical support in onshore/offshore operations
*Field/plant production fluids Samplings
*Handling/Treatment/Separation of oil/water samples.
*Knowledge of standards ISO-9000/ISO-14000
*Promotion of chemical products.
*QC/ Chemical analysis by ASTM/API Methods, UV-Visible spectrometry and HPLC.

PROFESIONAL EXPERIENCE

2005 –2007 (Present) Neotechnology, C.A, Venezuela – Germany
Laboratory & Field Chemist

* Coordinate and perform laboratory studies to evaluate new technologies to enhance oil & gas production. Evaluation of chemical formulations to sand control involving the following technical parameters: Porosity, Permeability retention, pore volume optimization, injection rate, proppant types, temperatures, pore pressure, initial fluid saturation, confinement pressure, fluids compatibility in aqueous and non aqueous systems, chemical preflush, among others. Treatment and separation of oil water samples. Fluids rheology
* Develop rock specimens under P/T controlled conditions to evaluate curing time, type of chemical formulations and evaluate mechanical properties through UCS and PLT.
* Evaluate gelling time in static and dynamic conditions using different starters of polymerization.
* Design and set up equipment to evaluate different processes at reservoir conditions. Maintenance and calibration of laboratory equipments. Calibration gauges, transducers, high-pressure syringe pumps.
* Serve as a sale representative promoting chemical products
* Design of methodologies -standard operating procedures (SOPs)-state of the art studies

2003/2005 Universidad Central de Venezuela, Petroleum engineering faculty.
Technical Support Chemist

* Responsible for the reactivation of the PVT laboratory. Maintenance and calibration of PVT equipments: Blind liquid phase PVT Cell and volatile/condensate fluids cell. (Compressibility up to 8000 psi). Calibration of rolling ball and Brookfield viscosimeters
* Served as technical support to undergraduate students & technicians in the reservoir rock and fluid properties laboratories from petroleum engineering faculty. Water/sediments, air/water permeability, porosity, fluids saturation, capillary pressure and ASTM/API methods.
* Worked in an experimental methodology to eliminate phenol from phenolic wastewater effluents of a naftenic acid plant by a laboratory ozonation system.

1989/2003 Research Centre of PDVSA-INTEVEP, Venezuela:
Advanced professional II; Activity Leader for La Salina project and Professional I, Laboratory and activity coordinator for Lagomar project. Offshore projects. 1996/2002,

* Designed, organized and performed laboratory activities to establish alkali-surfactant-polymer (ASP) formulations to the reservoirs LL-03 and VLA 6/9/21, involving fluids characterization, conventional and special core studies. Fluids studies involved: phase behavior to oil-water-surfactant systems, optimum polymer concentration, critical micelar concentration and ultra low interfacial tension to surfactants. Rheological behavior, molecular weight effects, thermal stability (bottle tests, anaerobic chamber), fluids compatibility, solubility, interfacial phenomena and compatibility of polyelectrolytes and additives in formation, injection and soft water. Evaluated Antiscalants. Conducted Coretestings and Fluid-rock interactions tests: chemical retention, Absolute and relative permeability, capillary pressure, wettability, porosity, pore volume and oil recovery.
* Studied the surfactant/polymer interactions by rheology and tensiometry.
* Contributed to the technological risk analysis for an ASP full field application and worked as a part of a team to generate a pilot design to determine the effect of gas lift on the produced fluids and the effect of the transport of injected blends on the viscosity at the experimental well "CEPRO"
* Coordinated and oversaw the quality control and preparation of whole slug of ASP injected in the well 1325, during the pilot test "SWCT" to evaluate the efficiency of ASP process in Lagomar field (offshore). On-site inspection of the barge facilities to evaluate mixers and tanks integrity. Installation of equipments required to monitor and ensure the quality of the polymer and surfactant blends, previous the pilot test
* Performed water/oil separation in the field using portable separator and demulsifiers. Oil and water (Brine) tests by ASTM, API and SMWW methods.
* Analyzed asphaltenes content, water and sediment content in crude oil by (ASTM 4007-02, API MPMS Ch. 10.3/10.2), density, specific and API gravity, carbonates and bicarbonates in brines (Alkalinity), chlorides, total dissolved and total suspended solids in brines.
* Served as a technical support in project "Exploitation and unconventional uses of heavy and extra heavy oils" to demonstrate the cracking and hydrogenation of heavy oil by electrochemical treatment.
* Technical support during the injection and sampling of tracers in the Lagomar field.
* Supported the preparation, mixed and injection of emulsions with heavy oil at the FN-2 well, Furrial field.

Associated Research Technician III (Field technician) to both Projects "Support to the Integrated Studies to the fields: Centrolago (offshore) and El Furrial(onshore)". 1992/1996

* Investigated the fluid-fluid compatibility and fluid-rock compatibility through filtration tests and fines migration studies (critical velocity) on oil free and aged cores and helped scale data to field condition.
* Carried out reactivity tests of heavy oil to activate natural surfactants.
* Sampled oil-water to extract chemical and radioactive tracers to monitor water breakthrough in production wells and sampled H2S at wells of the Furrial field. Designed and improved the laboratory facilities for treatment and separation of oil/water samples containing tracers using demulsifiers, ultrasound and electrical treatment. Collaborated with the risk analysis using the methodology "What IF" to use this process in laboratory.
* Sampled light oil with needles on well head and well pipe (HP&HT) to geochemistry analysis.
* Selected and evaluated HT resistant polymers and its blends with alkali-surfactant for HT reservoirs.

Principal Research Technician, Reservoir Technology Department, 1989/1992

* Set up systems with different types of porous media and handled the tomography technique to evaluate the distribution of fluids inside the cores.
* Performed extra-heavy and heavy oil thermal treatment tests using hydrogen donors, methane, water and steam in static & dynamic conditions. Evaluated the steam injection with solvents on heavy crude oil. Characterized these samples by density, °API, viscosity and thermal analysis.
* Conducted the preparation/injection of polymer/biopolymer solutions in reservoir cores to evaluate flow parameters; injectivity, resistance factor (RF) residual resistance factor (RRF), brine injection, oil recovery and polymer retention, monitoring polymer concentrations by UV-Visible spectrometry and HPLC.

EDUCATION
2000 BS in Chemistry (Technology)
Universidad Central de Venezuela, Caracas, Venezuela

1986 Associated degree in Chemistry
University Institute of Technology Capital Region, Caracas, Venezuela

OTHERS SKILLS
* Microsoft Word, Microsoft PowerPoint, Microsoft Excel, Basic reservoir simulation with STARS
* Languages: Spanish: Mother Tongue/English: Spoken and Written (High Intermediate Level)
* Supervision of small group of professionals and students in laboratory and field work
* Analysis, treatment and purification of gold of mines and jewels. Goal-oriented/Fast learner/Innovative
* Data/results interpretation and preparation of progress/final reports
* International exposure during technical visit to partners in North America and Europe
* Co-author of international technical publications in chemical flooding (EOR)

NOTICE PERIOD: One month CURRENT LOCATION: Venezuela

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8801 to 8850 of 9785)

Go to Search Parameters...

Brief Description

Fast track professional, successful in field of instrument, control and electrical for installation, commissioning, repairing, maintenance, calibration and modifications of Electronic, Pneumatic, Safety, Analytic instruments. and control systems.

Experienced chemist with over ten years working in EOR/IOR projects associated to laboratory and field to the oil & Gas industry in Venezuela. Coordinated and used different analytical equipments, methodologies and facilities, following standard procedures of laboratories and operations

ITI Electrician, Diploma Electrical, Computer Diploma, Hardwere & Softwere Knowledge, Apprentischip in Lineman Trade From State Electricity Board

Free! A seasoned, highly organized construction professional with over 39 years of heavy industry experience which includes both industrial construction sites and field/shop fabrication locations in all major industries worldwide

M.Sc. in Applied Geology, with Expereince in Geotechnology and Exploration Geology, with well computer knowledge

Seven years of progressive advancement as Planning Engineer/Project Control, with a unique mix of exposure on project/construction engineering, quantity survey/cost control, and estimating. Proficient with Primavera Project Planner (P3) and Microsoft Project

Operations, I&C, Electrical, Startup, Commissioning Experience. 11 years of progressive technical and supervisory roles in Oil/Gass and Power Plants. Includes Gas Turbine, Comined Cycle, and Pipeline Operations.

I am an experienced Mechanical Engineer in the field of Design & Welding (IWE) Engineering. I obtained my Dipl-Ing. certificate (equivalent of MSc(Eng.) in Design and Construction of Agricultural and Construction Machinery from the Technical University of Berlin in Germany

Instrumentation supervisor - QP refinaries, Qatar

Drafter/Designer-Entry Level with some experience

Masters in Mechanical Engineering - 2004, Bachelors in Mechanical Engieering – 2001, Computer awareness:Auto CAD, MS Office, MS Projects, Power Point Presentations; Trained & Certified for Health, Safety & Environment - IOSH

Gas turbine expert, Engineering, Rotating Equipment technician,MechanicalEngineering

Looking for a mechanical engineering position.

Having total experience of 14years 11months in Offshore, Onshore, Chemical and Refinery fields with strong PDMS Piping Designing, Draft, Isodraft and PDMS Administration background looking for an opening of PDMS Piping Designer

for 25months at PetroRabigh Development Project PC1 & PC3 as a Snr.Planning Engineer with Gama Industry. Capable to detect every single activity's bottleneck that prevents to achieve the "MC, PC & RFISU".

Data manager with over 10 years of experience in the mineral exploration industry providing high quality digital tools, data and information to geoscientists. Extensive experience managing IT projects and services on an international environment. Strong analytical, organizational and technical skill

Fresh Mechatronics Engineering Graduate

Oracle dba, technical support

To obtain a position offering challenging responsibilities in a reputed organization requiring unwavering commitment towards profession and resultantly to become an integral part of the organization.

Java, JSP, Servlet, J2EE, JSTL, SQL, PHP, ASP, XML, HTML

I am a 3rd year heavy duty mechanic i have worked on all sorts of equipment from electric gorman rupp pumps to desiel engine huydraulicly actuated concrete pums,air compressors ,loaders,cement mixer trucks,centerfuges , pannels,pipehaulers, forklifts

Highly motivated geologist with an Msc in engineering geology based in the UK looking for a growth oriented job in oil and gas industry that will provide me with relevant professional experience. Accustomed to a fast-paced multidisciplinary environment where deadlines are a priority. Good organisati

I am presently working here in Saudi Aramco Oil Company as Supply Maintenance Planning Support Engineer. Since I started to work for my profession, I'm exposed more on Operation and Maintenance ( Reverse Osmosis , Desalination, Power Plant, Manufacturing & Petrochemical).

Bilingual (English and French) Engineer with +13 yrs Petroleum Production, Wellsite and Operations experience in Oil & Gas and +3 yrs in Construction and Environmental work. Worked for Shell, Vermilion and Maurel & Prom in Africa, Europe and North America. US resident.

Bilingual, Certified PMP and Six Sigma Greenbelt, self-motivated and client-focused Business Systems Analyst with seven years of global experience as well as experience in the Health/Environment, Public, Financial and IT Sectors.

Transport & Logistics Safety (HSE):Road Safety Monitoring, • 3PL Contractors/ Subcontractors pre start up HSE Audits (HSE MS, HSE Plans, Documentation Control, Vehicles Roadworthiness Inspection, Drivers Competency Assessment, Workshop Audit, Transport Routes Survey, etc.)

I have had a truck licence for just on 20 years. Previously I drove grip and generator trucks for television outside broadcasts and various location shoots.I am a confident and reliable driver how wishes to take the skills to a more regional out back enviroment. I would be an attribute to any team.

Meet deadlines, supervise others, accept responsibility, solve problems, instruct others, organize/manage projects, assemble things, drive/operate vihicles, observe/inspect, operate tools, repair things, use complex equipment, calculate/compute, check for accuracy, compare, research, detail-oriented

Fitter Including Machining and Diesel Fitting

A highly motivated and enthusiastic analytical chemist seeking a full time laboratory position. Team-player as well as individual worker. Well-organized, detailed oriented, quick learner.

Internationally Expierenced, First Year MBA, Arizona State University

Oil Batteries, Gas Plant Operation, High and Low Pressure Boilers, Feedwater Treatment, Piping, Valves, Pumps, Compressors, Refrigeration,

Precision Millwright, Welder. Turbines, Power Plants, Ethonal Plants, Steel Mill Plants.

Electronices Automation Control engineer designer

I have 5 years experience in Administration & Secretarial works, I worked for both local and multinational companies and I am securing a promising position that offers both challenges, good opportunity for growth and to meet my competencies, capabilities, skills, education & experience.

A globally-certified procurement professional with extensive Asia-Pacific experience

Value through hard work and performance

I have many years of experience in the security companies and construction.

CIVIL ENGINEER WITH 12 YEARS OF EXPERIENCE IN CONSTRUCTION FIELDS

• More than ten years experience in project/operation management and real estate development

Marketing and Software experience with Oil & Gas (drilling) background

Twenty years of contract management and procurement experience in commercial and government environments including supervisory roles. Experienced in onshore and offshore construction international contracting.

graduate metallurgist and holder of BSc Min in Metallurgy and Mineral Processing from the University of Zambia with merit.Am currently working for Konkola Copper Mines (KCM) at the Nchanga Tailings Leach Plant as a metallurgist.

BSc Mechanical Engg. with Honours (aggregate 82.5%) having 1 years experience in Maintenance and Production Operations.

I am available for all your open positions regarding my qualifications - Technical/Managerial/Projects positions, throughout Europe/Middle East & Africa.

I have held management/technical positions with the companies listed within my resume for over 20 years specializing in construction, environmental, mining, mineral/material processing and chemical manufacturing businesses. I have significant experience in all functional areas & P/L responsibility.

15 years experience in the management, production, materials, logistics and international transport fields, 13 of which are at managerial level, the last 10 years being spent as an expatriate in Nigeria, France, Togo and West-Central Africa.

I wish to introduce myself as an Automation Engineer with over 8 yrs of exp in automation field.

I am mechanical engineer 2002 ,I work as site engineer in the construction companies.

I am a highly experienced and enthusiastic Electrical, telecommunication, electronics and computer Engineer, especially in the mechanical and electrical field, currently working as a maintenance manager, looking for a challenging job where my experience, education, background, certifications and tea

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 [ 177 ] 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out