Resume - 27 Years Crude Oil Refinery and Manufacturing experience

Misco Jobs

Resume #68393

CONTACT INFORMATION:
View contact information...

Accomplishments
In my present position as Compliance Engineer, I created coloured pre-printed Permit to Work templates with hazard identifications and control methods for issuing various jobs. This meant that a permit could be completed within 10 minutes instead of taking up to an hour as these templates already identified hazards and control methods for the jobs and all the PTW receiver has to do is to read the contents of the templates and sign.

As Shut down coordinator during major annual scheduled shut downs at the refineries I worked was the most exciting time I experienced. To be in charge of a Crude Oil Plant with so many operators, contractors and various other personnel involved was a situation that brought the best out of me. I wrote all the shut down procedures for control room operators to shut down the plants safely. Every shut down took us 6 weeks to complete including catalyst reloading or catalyst regeneration on the reactors.

I also successfully extended the life time of the our catalyst (needless to mention very expensive) in our reactors system during normal operation by using a small feed bypass line (a line never used for a number of years despite installed during construction) entering the reactor system between the 2nd and 3rd reactor resulting in the 3rd and 4th reactors working a bit harder than the 1st and 2nd distributing the process evenly over the 4 reactors in series without compromising the product specifications, an achievement I'm very proud of.

FONTERRA BRANDS TIP TOP LTD – AUCKLAND
Compliance Engineer – Fonterra Brands Tip Top Ice Ltd
Auckland and Christchurch

Presently has sole responsibility to coordinate the Fonterra Permit to Work System project at and HSNO, Hazardous Substances and New Organisms – chemical management at main manufacturing plant in Auckland and the Christchurch branch, to ensure hazard identification, job task analyses and controls are put in place prior to any work being carried out on site to ensure personnel, equipment, environment and public safety.

ASSET MANAGER - THERMAL HEAT PLANT
As Asset Manager to ensure that the Heat Plant owned by Meridian Energy exceeds the contractual obligations to their client Winstone Pulp International. Also responsible for overseeing the operational and maintenance activities associated with the energy facility as well as shut down planning and coordination. To Continuous seek improvement initiatives and management of safety of the plant. Responsible for leadership and management of staff on the plant. Contorl room Operations using Scada Computerized system.

SENIOR PROCESS ENGINEER / CRUDE OIL PLANT SUPERVISOR
Responsible for leadership and management of staff on the plant, improving costs, quality and waste reduction, problem solving as appropriate. Maintain high standards of safety within operations and support areas. Shut down coordinator during major annual shut downs. Identification and implementation of continuous improvement initiatives and management of safety, quality and regulatory compliance on the plant. Experienced in plant commissioning/decommissioning,control room operations - TDC 3000 computerised system and maintenance activities.

PROCESS PLANT OPERATOR
Responsible for controlling the process of the Visbreaker and Desulphurization units / plants which encompasses safety, hygiene and equipment maintenance

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1101 to 1150 of 9870)

Go to Search Parameters...

Brief Description

Seeking a challenging career with a progressive organization which will utilize my skills, abilities, education in Geology and working experience (10 plus years) in Oil and Natural gas exploration.

Geotechnical Field Rep

I am an Instrumentation and Electrical Supervisor/ Technician with significant experience in Maintenance and HUC in the Oil & Gas and Petrochemical Industries.

Free! a person of unusual dedication, efficiency and drive. With my vast experience in the oil industry, I know I can contribute to your company.

SUMMARY OF EXPERIENCE: Diversified experience over 20 years in various fields. The first few years of this period included tertiary studies where I successfully completed 2 diploma courses; Management Development Programme, Principles of Production and Inventory Management,

Wellsite Supervision , specializing in Completion and Workovers, I am 49 years of age , in good physical and mental health. I have 28 plus years experience in the Oil and gas services industry with 22 of that being internationally, mainly in the former Soviet Union republics and North Africa

I have 12 years experience in oil and gas field

Twelve years experience as Maintenance Manager in an Ind. facility developing and implementing complete maintenance programs utilizing maintenance management systems to perform preventative and predictive maintenance methodologies, management of MRO inventories, procurement, capital projects, Quali

More then 20 years experience as Welder

Well Services Supervisor 30+ years in the patch

My job expertise is in the field of technical and non-technical training for automotive and heavy equipment. I conduct trainings for repair and maintenance of vehicles systems and instrumentation. As a Trainng Head / Instructor I also manage the whole training operation in my department.

i can work alone and do maintenance job safely

Over 32 years experience as a Geotech in the oil and gas industry using many different programs to assist Geologists and Geophysicists for data retrieval, loading and map generating for all types of data except seismic.

I Retired after 20 year of USAF Military Active Duty as an Aerospace Ground Equipment Technician and work for 20 year as Aerospace Ground Equipment Technician. One year Aercraft Aresting Barrier MAAS / Bak -12 Mechanic and 2yrs 7months Power Pro Generation Technician.

•Extensive exposure to complex clastic environments. •Pick up formation boundaries and lithology changes; determine casing point.

I have 20+ years experience in fire, safety, risk, design and testing. Of this 14 years were spent overseas.

Registered Nurse, more than 15 years experience. looking for medic job in offshore industry. highly experienced in emergency care, Trauma management, Advanced life support, and general medical treatment of employees.

I have extensive supervision and management experience (including QA/QC) on contracts valued from £30 million to £3 billion in the fields of Oil & Gas related work, military airfields, Power plant construction, water provision and dam construction in the Middle East, Africa and the Caribbean.

Reservoir or Production Engineer

Social Responsibility Specialist

Mechanical Engineer, with +30 yrs experience in Quality Assurance Management and Engineering Management, executed more than 10 projects in Fertilizer, Refinery and Petrochemical industry

Petroleum engineer with 20+ years of diverse experience. 4 years of multi cultural supervisory experience in North Africa. References available on request.

Process design for some of the largest Oil and Gas production systems (offshore/onshore) and pipelines (including Jamnagar Loni LPG) in India have been done directly by me in Engineers India (EIL) or withands on supervision (complete Process Design responsibility from concept to comm. of project).

corrosion and cathodic protection

Electrical Engineer with sea /offshore experience, familiar with automation, DP courses,PLC control,

Planning, executing & managing large projects involving implementation of Information & Communication Technology systems.

For the past 8 years, I have been working with Abu Dhabi Gas Liquefaction Co Ltd (ADGAS). I am well versed in all the LNG Sales Contracts like Heads of Agreement, Term Sheet, Gas Sales Purchase Agreement, Confidentiality Agreements, Sales and Purchase Agreement for both FOB and Ex-Ship sales.

Ph.D in Safety Engineering, looking simililar job either consultant, or mining, mechanical engineer or any safety related job

18 years experience the Business, Commercial and Supply Chain Strategy and New Business Development for a large range of organisations and business types. Experience in oil & gas and manufacturing (Head of Business Services Brunei Shell).

See resume body

Business development manager for latin america

I have had near 20 years of experience in the marine industry, currently a technical superintendent in a company with accomodation workbarges servicing the oil industry. All these barges are fitted with 8 point anchoring units, have worked on engine driven types such as Skagit & Amcon and electric

Free! Planning / Scheduling, Project engineering, Subcontracts administration, Primavera, Open Plan,MS Office,Pipeline design/construction/replacement

Objective: I would like to pursue a challenging position in the oil and gas industry working as a development geologist developing oil and gas fields along the Texas Gulf Coast.

Maint Planning, Materials management, warehouse, plant maint, turnaround, project

I am a Mechanical Engineer from Madras University in the year 1981. I have over 18 years of Offshore oil fields experience in production Operations of oil & gas and water injection.

Ph.D in Geophysics, over 12 years industry experience in offshore and onshore seismic 2D/3D data analysis, processing and interpretation

Reservoir/Geoscience Technician

Completion/Workover Supervisor

I am a mechanical engineer possessing over 15 years of rich experience with the Oil and Gas sector and Petroleum Industry. The basic areas of my expertise are Planning & Development, Project Management & Execution, Design and Detail Engineering.

Having qualification CSWIP 3.2 & Bgas grade2 from TWI - U.K

I have worked in the oil and gas business 30 + years in several countries and several states in the USA. I have drilled wells to 16000’ and completed wells 19000’ deep, drilled directional and horizontal. I have drilled in severe lost circulation areas, sour gas areas, drilled under balance in sever

Monitors meters, gauges and other instruments attached to equipment and makes adjustments whenever necessary

I have made much work in this field of Civil (Architectural) & Mechanical (HVAC) as a Draughtsman and site supervision.

Experienced Permit to Work Co-ordinator with HSE and Operations experience

Production Chemicals, Corrosion Monitoring.

A competent Fire Expert, with an extensive Fire & Safety background, and knowledge in corporate guidelines. A proven professional and Technical Communicator with expertise in Loss Prevention, Safety & Fire Protection support, safe work practices, fire systems and design reviews. He has been accounta

Petrophysicist, 11 years experience. Strong well log interpretation in vertical and horizontal wells. Thorough knowledge of Wireline / LWD tools. Experience in Clastic and Carbonate reservoirs. Expertise in core-to-log reconciliation and neural networks. Co-author on two books on well-logging data a

More than 20 years land mark f/R/b to tool pusher

27 Years Crude Oil Refinery and Manufacturing experience

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 [ 23 ] 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out