Resume - I had worked as Development & Design Engineer in Jordan Petroleum Refinery for s...

Misco Jobs

Resume #68661

CONTACT INFORMATION:
View contact information...

Date of Birth: 25th of June, 1979
Nationality: Jordanian
Social Status: Single

Education:
BSc in Mechanical Engineering From Jordan University.
Year Of Graduation: February, 2002
Grade: Very Good
Master Degree in Mechanical Engineering From Jordan University
Year Of Graduation: February, 2005
Grade: Excellent

- Master Degree in Mechanical Engineering, with GPA (3.63 out of 4.00), rank 1 out of 25 students. University Of Jordan, Amman, Jordan. Thesis subject is "Dynamic Modeling And Control Of Cantilever beam mounted on a moving Cart And Carrying Tip Mass ".
- BSc in Mechanical Engineering, GPA (3.16 out of 4.00), rank 3 out of 50 students. University Of Jordan, Amman, Jordan. 2002.
- General Secondary Certificate, 92.8 out of 100, 1996-1997. Orouba Secondary School,
Amman, Jordan.

Graduation Projects:

1. Master Degree Thesis
"Dynamic Modeling And Control Of Cantilever beam mounted on a moving Cart And
Carrying Tip Mass ".
The uniqueness of this research that it combines modeling of nonlinear vibration and using Optimum controller to reduce vibration, which is considered as main of important fields in Mechanical Engineering researches.

2. BSc Degree Project
"Year-Round Performance Of An Improved Solar still"
This research was found to study the performance of solar still during the year in Jordan, so tilt angles and suitable flow rates were determined to increase the efficiency of the solar still This Project has been ranked as one of the best graduation projects in Jordan and get homage certificate from Jordanian Engineers Counsel.

Experience:

(10th Feb. 2006 - up to Now) Lecturer and Researcher in Mechanical Engineering Department in King Fahd University for Petroleum and Minerals.

Scope of Work:
* Performing Research Work since the University has many Research Work with ARAMCO regarding increasing the performance of Static and Rotary Equipment.
* Teaching undergraduate students while I'm customized to give courses and laboratories sessions in the field of Dynamics and Vibration.

(20th Sep. 2005 - up to 1st Feb. 2006) Purchasing Manager at Mechanical Engineering and Contractors ( MEC ), Amman, Jordan.

Scope of Work:
* Direct activities of purchasing in order to control and assure mechanical parts, material supplies and services are purchased at the lowest possible cost consistent with established standards for quality.
* Determine the recommended purchasing policy and procedure within the limits of delegated authority and in accordance with company-wide policy and procedures.
* Direct the activates of purchasing toward the development of new sources, visit vendors and assist in determining vendor capacity.
* Cooperate with all departments requiring purchasing assistance particularly in the field of equipment development and product specifications and substitute materials.
* Review and approve purchase requisitions and orders within the limitations of signing authorities. Supervise the negotiation of purchase contracts, establish and approve source of raw materials and supplies.

(7th Apr. 2002 - up to 14th Sep. 2005) Development Engineer in Jordan Petroleum Refinery Co. Ltd., Zarka, Jordan

Scope of Work: Development engineer is responsible of the following:
ƒæ Design and preparing construction drawings for variable needs such as hydrocarbon facilities and fire fighting piping.
ƒæ Preparing and studying of public tenders to purchase special equipment and services, including preparing of technical specifications and studying offers.
ƒæ Reading and complying with international standards (e.g. NFPA, API, ANSI, ASTM... etc) in designing and preparing standard specifications for tenders

Skills:

ƒæ Languages:
* English: (Very good in reading writing and speaking)
* TOEFEL Score: 233
* Arabic: (Fluent)
ƒæ Computer Skills & Internet: (Excellent)
ƒæ Programs: AutoCAD 2004, Ansys, CAE pipe, MT Exchanger, C language, Matlab, Pro Engineering, Pro Mechanica, Web page design ¡Ketc.

Main Achievements In Refinery:

o Design Of Knockout drum for Topping Unit, Including the following:
- Design Calculations based on ASME section VIII Div.1
- Installation of knockout drum based on piping design and thermal stresses calculations.
o Installation of CO2 Degasifier for Reverse Osmosis Unit Including relevant piping design.

o Procurement of Automatic feed filter for Unibon Unit, including the following:
- Preparation of standard specification as per Refinery requirements and according to ASME section VIII Div.1 and UOP requirements.
- Tender evaluation according to Refinery standard specification
- Preparation of installation drawings.

o Procurement of heat exchangers for Hydrogen Unit, including the following:
- Preparation of standard specification as per Refinery requirements and according to ASME section VIII Div.1 and API 661 standards.
- Tender evaluation.
- Approval of manufacturer design drawings and mechanical design calculations according to ASME section VIII Div.1 and review of WPS,
PQR and WPQ.

o Chief engineer in Palletizing System in Jordan including:
- Preparation of pallets and forklifts specifications.
- Tender evaluation
- Start up the palletizing units in LPG cylinder filling stations.
o Procurement of excess flow valves for LPG lines including preparation of standard specification and tender evaluation.
o Design Of Central heating System including procurement of all equipment such as heat exchangers and pumps and preparation of all piping construction drawings.
o Procurement of knockout filter for Asphalt Unit including preparation of standard specifications and tender evaluation.
o Checking and evaluating equipment conditions at shut down stages such as checking thicknesses of pressure vessels and heat exchangers and deciding if these equipment will be replaced or not.
o Evaluation of workshop capabilities of tenderers, including visiting their factories and establishments.

Technical Training Courses:

ƒæ Training in Solar Energy Laboratory in Ecole Nationale d¡¦Ingenieurs de Tunis in the Capital Tunis for 2 months (From June 19th to July 15th, 2001 ), working in the solar energy systems and heating systems of water.

ƒæ Training Course in ¡* Design And Selection Of Pumps ¡¨, (From Apr. 28th to May 9th, 2002) held on the Engineers Training Center.

ƒæ Short Course in " Supervising Techniques In The Modern Management " (From July 6th to July 10th,2003 ) in Development And Training Center in Jordan Refinery.

ƒæ Training Course in ¡* Design and Requirements Of Fire Fighting-Systems ¡¨, (From Aug. 10th to Aug. 21th, 2003) held on the Engineers Training Center.

ƒæ Training Course in ¡* Heating, Ventilation and Air Conditioning Systems ¡¨, (From Apr. 26th to Apr. 29th, 2004) held on the Engineers Training Center.

ƒæ Training Course in ¡* Technical Course on Pump Design Selection and Maintenance¡¨, (From Apr. 17th to Apr. 20th, 2004) held on the Consultative Center for Science and Technology, Department of Continuing Education in Jordan University Of Science & Technology.

Computer Training Courses:

ƒæ Short Course in ¡* C-Language " held in Internet And Computer Club in Jordan University (From Jan 29th to Feb. 9th, 2000).
ƒæ Short Course in ¡* Computer Maintenance " held in Internet And Computer Club in Jordan University (From June 18th to July. 29th, 2000).
ƒæ Short Course in ¡* MATLAB-Language " held in Internet And Computer Club in Jordan University (From Sep. 16th to Oct. 4th, 2001).
ƒæ Short Course in ¡* 3D Studio Max " held in Internet And Computer Club in Jordan University (From Feb. 4th to Feb. 16th, 2002).
ƒæ Short course in " Advanced Excel 2000" (From July 6th to July 10th,2003 ) in the ACCOUNTANT STUDIES COUNCEL.
ƒæ Course in "Comprehensive Computer Skills " including Windows applications, MS Office (Word, Excel, PowerPoint, Access ). From July.27th to Aug.21th, 2003 ) held on the CENTER FOR STUDIES,CONSULTATIONS AND COMMUNITY SERVICES in the HASHEMITE UNIVERSITY.
ƒæ Short Course in ¡* AutoCAD 2004 Essentials and basics (Level One)¡¨, held in ASCENT center for technical knowledge (From June 19th to July 1st, 2004), Amman Jordan.
ƒæ Short Course in ¡* AutoCAD 2004 (Level Two)¡¨, held in ASCENT center for technical knowledge (From July 10th to July 29th, 2004), Amman Jordan.

Personality Highlights:

A capable individual, who meets and exceeds employer expectation, easily establishes and maintains positive rapport with people from all backgrounds.
Very capable in handling out of scheduling tasks, and achieving them with great proficiency.
Doesn¡¦t like to deal with routine, likes to travel, meeting new people and like to learn new things.

Note: All certificates will be provided to you upon your request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2501 to 2550 of 9772)

Go to Search Parameters...

Brief Description

I worked five years of the oil field to the national company of geophysics (ENAGEO) in south of Algeria as land surveyor engineer and two years of the mining field to the company of the barite mines (SOMIBAR) in north of Algeria as engineer surveyor

Extensive equipment/software operation experience compassing hydrographic, seismic, sides can sonars, sector scan sonars and magnetometers. Experience in online data acquisition, data quality control, processing, interpretation and collation of reports.

1.Accurately process and record all technical documentation in accordance with agreed procedures. 2.Input progress mark-up information into Document Management System (DMS). 3.Receive, check accurately record into DMS system and distribute all project technical drawings and documentation

Educational Qualifications:1. Master of Technology in IndustrialSafety Engineering from NIT, Trichy with 85% marks (8.5 CGPA) 2. B.E in Mechanical Engineering with 81.77%. Experinece: 1. From August 2006 to till now - Working as Safety Engineer in Mina Abdullah Refinery of KNPC

Instrument & Control System Design Engineer

I had worked as Development & Design Engineer in Jordan Petroleum Refinery for several years .My work includes Design of static and rotary equipment according to international codes.Also Im holding Master degree in mechanical Engineering that gives advantage to go through research and development.

Analytical Chemist in the field of QA/QC/R&D for Beverage and Water Treatment

HR specialist

Sr. Engineering Technician with 15+ years of industry experience at both Regional and Corporate levels. Highly proficient with Aries and Microsoft Office as well as an IT background.

Graudate, Experience in Various Power Station / Infrastructure Admin / Secretarial Position

Have extensive back ground on ship safety inspection and Maritme industry

Business Analyst-Information Technology

ATTENDING BREAKDOWNS IN PLANTS

6 yrs exp.in fired heaters of peroleum .involved in design /documentation & cordination with other discplines

Geologist with a very strong experience in most of the oil/gas drilling operations

A highly qualified, talented and result driven marketing management professional, an AMIE and also holds a diploma in maintenance management with an experience of 15 years in the maintenance, Reliability Engineering as well as conditioning monitoring of rotating machinery. A dynamic, team spirited

More than ten years experience involving in Basic Design & Detailed Engineering, Construction and commissioning in Oil & Gas field. Extensive experience in all phases of Instrumentation Engineering starting from Feasibility Study, Basic Engineering Design Data, Design & Detail Engineering, Construct

Gas Turbine Repair Engineer

B.E., (Bachelor in Industrial Engineering from Indian Institution of Industrial Engineering),

B. Sc. Chemistry (Grade Good)

Applying Insulation and Sheet metal Cladding.

Review and monitor Federation Delegation's finances in assigned countries. Ensure the monthly closing of accounts in delegations done on timely manner

Well Qualified, Skilled & Experienced proffer in Design, Consultancy, R&D in Civil, Structural, Geotechnical, Architectural and Industrial Engineering

16 years of Piping & Pipelines Projects execution experience in the Industries Refinery, Hydrocarbon and Oil & Gas (Project piping, pipelines, Tanks, structurals, equipments). Knowledge of ASME Sections, ANSI, API & DIN codes /Standards.

Plant operation in methanol plant, hydrodesulphurization, reformer, compressor, turbine, pumps, exchangers, distillation, tankform.

Welder ****16 Years Experience***

Pipeline Integrity Engineer with Metallurgical & Material Engineering background, extensive experiences in the oil/gas both Offshore and Onshore (and swamp) pipelines.

chemical engineer with 7 years experience in chemical & petrochemical plant operations, Expert in handling DCS of YOKOGAWA Centum CS3000.

FEA ENGINEER-ANSYS,HYPERMESH,ABAQUS

Journeyman Electronics Technician,Seismic,Telecommunications,Copper Cable Splicing

Masters in Electrical Engineering. Four year experienced. Skills: MATLAB, PLC Programming, Simulation,HSPICE,MULTISIM, Assembly Language, AutoCAD, Visual Basic, C/C++, Operating Systems

HSE Manager

I am a 26 years young & energetic, self-motivated diploma Structural Fabrication engineer (Associate Degree) with a total seven years experience in checking & detailing engineering drawings of steel structures & equipments for Refinery Projects.

Back Deck Operation / Overall Equipment Maintenance & Control

Sr. Structural Engineer-Ports, Marine & Offshore 8 years experienced, with knowledge of SACS, StaadPro, SAP

Skills are; mechanic, HVAC, heavy equipment etc.

Chemist Search a job in regard to my education and experience I have been working in different petrochemical and petroleum industries for the last 10 years at various senior positions and two years of metal protection surface chemicals sales experience.

Diploma in Electrical Engineer. AutoCAD. Word. Excel. Windows.

Sr.Mechanical Engineer having 16 yrs of Experience in Petrochemical, Oil&Gas field

Experienced Engineer with 15+ years of on job experience. Conversant with ISO ,international standards and Oil and Gas industry requirements. Can lead a team of inspectors .Has worked in Saudi Arabia, Yemen, UAE and Kazakhstan. Largest contract Value 1.3 Billion USD.

Being a petroleum engineer and having many years of experiences on middle eastern countries ( OMAN,UNITED ARAB EMIRATES, QATAR, IRAN...) could merit for any advertised jobs.

13 Years international experience with major oil companies and service organizations. Currently responsible for Russian Exploration and development for a European Independent Oil Co. Also responsible for feasibility and application of new technologies within the company worldwide.

OBJECTIVE My goal is use my chemical and process engineering knowledge in a position as a Process Engineer or simulation engineer in the Refining Industry. Also I would be interested in using my knowledge in Logistics in any Industry

Sixteen (16)years of professional experience within Owner and Consulting companies in projects controls and business management for multidisciplinary engineering, procurement and construction projects for the industries, mainly in oil (upstream & downstream) and mining.

Field processing geophysicist experienced in marine OBC and streamer onboard data and navigation processing, UNIX systems use and administration, and small boat work.

PIPING STRESS ENGINEER

I am Associate Engineer in Electrical, Certificate of Competency as Electric Supervisor and Certificate of Competency as 3rd Class Boiler Engineer and 11 years experience in Power generation plant Operation and Maintenanace department with SIEMENS pakistan and Albario Engineering Ltd.

Materials Coordinator +-14 Years, Drilling Logistic, Materials Controller

Pipeline Construction, Horizontal Directional Drilling, surveying, ground surveying, for number of River crossings in India & abroad

Experienced mud engineer

First Prev [ 51 ] 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out