Resume - 2 year appreticeship at ammonia plant of fauji fertilizer co(ltd)pakistan.5 year...

Misco Jobs

Resume #68681

CONTACT INFORMATION:
View contact information...

POST APPLIED: Process Operator

Summary:
Plant operator with Seven Years experience Primarily in troubleshooting as well as design modification in FFBL (Fauji Fertilizer Bin Qasim Limited) Karachi. I took part in Steam Blowing, Flushing, and Hydro test. Start up and Shut down activities at AMMONIA Plant at FFBL.

Apprenticeship Training:
* One Year apprenticeship training from NFC Institute of Engineering and technological training, Multan as Process plant operator.
* Two Years apprenticeship training from FFBL. (Ammonia/DAP/Urea Complex) as Process plant operator.

PROFESSIONAL SKILL

CO2 REMOVAL AND METHANATION (Benfield Post):
CO2 Absorber K2CO3 solution used to absorb CO2 at 26kg/cm2.
CO2 Stripper 2 stripper with reflux for water balance and purification.
CO2 Reboiler Thermosyphen type 4 reboiler used to heat input to solution.
Methanator NiO2 catalyst used to convert CO and CO2 into methane
And purifies synthesis gas (N2 & H2).

GAS TURBINE:
Gas Turbine: GENERAL ELECTRIC FRAME-5 Driver of Synthesis Compressor.
Cycle: Open, Exhaust to Heat Recovery Steam Generation Unit.
Rating: 13400 HP

DUAL TRAIN SYNTHESIS COMPRESSORS:
Compressor: COOPER BESSEMER (USA), Centrifugal, Multistage.
Driver: GENERAL ELECTRIC Steam Turbine, Impulse, Reaction, Condensing.
Flow: 370000 NMC/hr Rating: 16290 HP Oper. Pressure: 176 kg/cm2

DUAL TRAIN AMMONIA COMPRESSORS:
Compressor: COOPER BESSEMER (USA), Centrifugal, and Multistage.
Driver: GENERAL ELECTRIC Steam Turbine, Impulse, Reaction, Condensing.
Flow: 53500NMC/hr Rating: 6851 HP Oper. Pressure: 15 kg/cm2

AMMONIA RECOVERY UNIT:
Ammonia Absorber: Packed Column with Rasching Ring.
Ammonia Rectifier: Packed Column with Paul Ring.
Ammonia Recovered: 1.5 tons/hr

HEAT RECOVERY STEAM GENERATION UNIT ( BOILER )
HRSG: MACCHI (ITALY) with Option of Supplementary Firing.
Capacity: 110 Tons/hr
Pressure: 40 kg/cm2 Temperature: 380 oC

SKILL IMPROVEMENT COURCES
Steam Turbines
Centrifugal Pump
Centrifugal Compressor
Steam & Steam Traps
Energy Conservation
Control Valves

SAFETY AWARENESS
Handsome Safety awareness against personal safety as well as plant safety. Safe working procedure. Having fire-fighting training, special training's on safety topics like housekeeping, fire fighting, and use of Personal Protective Equipment (PPE) Acid handling, confined spaces, Emergency handling and First Aid etc.

TURN AROUND EXPERIENCE:
I have worked in annual Shutdown at: -
FFC- Jordan Fertilizer Co. Bin Qasim Karachi. TA-2001, 2002,2003, 2004&2006.
Pak Arab Fertilizer Ltd. Multan. TA-2000

ACADEMIC QUALIFICATION:

Metric Science 1st Div Multan Board

F.Sc. Pre.Med / Add.Maths 1st Div Multan Board
B.A 1st Div BZU University

Date of birth 08-09-1979
Marital Status Single
Nationality Pakistani

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2001 to 2050 of 10182)

Go to Search Parameters...

Brief Description

Ûtructural design and construction site supervision in the oil/gas fields

Oil & gas instrumentation installation supervision, commissioning and maintenance of control systems.

PETROLEUM ENGINEER, WORK OVER SUPERVISOR, WELL SERVICE, FACILITY ENGINEERING, WELL TESTING, ARTIFICIAL LIFT, ONSHORE/OFFSHORE OPERATIONS

Physical metallurgist and Welding engineer Steel design, Corrosion etc Willing to travel extensively Is looking for exciting employment, international carrier (e.g. Petroleum & Mining)

PhD-educated geophysicist with 12 years of experience in petroleum exploration industry and research institutions. Seismic interpretation of 2/3D for oil/gas targets in Australasia. Strong background in a variety of seismic data analysis, including AVO, LFP and depth conversions.

Control & instrumentation for oil &gas plants/pipelines, FEED &detailed engineering, HAZOP, TBE, vendor documents review, cost estimation, man-hours evaluation.

15 years of professional experience in Business Development, Technical Marketing and Consulting Services in the Engineering Software Industry.

Please see Resume Body.

Excellent client relationship, leadership and strong management aptitudes in service industry. 15 years of working experiences (8 years in management position) in oil & gas industry with multi-national organizations and international exposures.

Offshore and land rig maintenance(18years experience, mechanical & electrical). College Grad. Naval Nuclear Power - Mechanical Operator - Submarines Diesel overhauls on CAT D-399's (27). Many SCR schools and numerous technical schools.

Working 18 years with multinational companies of Power Sector (includes related Water & Waste Water treatment and Oil & Gas systems). Now working as Site Representative (Manager)and reporting directly to Project Director. See the CV

15 years of progressive experience and responsibility with documented success in the areas of drilling, workover, completions, engineering, operations and supervision at various organizational levels. I¡¦m seeking a challenging position as a Drilling Supervisor.

My areas of specialty include Turbo Machinery Dynamic Analysis, Predictive Maintenance and Reliability Engineering in Rotating Equipment.

Project Engineer/Refinery Reliability Engineer/Turnaround Coordinator Over 13 year career of both domestic and international refinery and engineering experience spanning major areas of the oil and petrochemical industry.

Manager HSE, HSE Advisor with 9.1 Years Experience in Petroleum Development Oman, Reliance Industries Limited (E&P) (Oil & Gas Field Offshore & Onshore, Civil Construction Field)

I am Bsc of metallurgical engineering and Msc of corrosion engineering and i'm expert at procurement such as purchasing, expediting and inspection on oil, gas & pertochemical industries

I have more than 9 year experience in Installations,Commissioning ,maintenance, trouble shooting of all Cathodic Protection Systems in Offshore-Onshore , Pipe Line ,Oil and Gas Industries, Refineries, Petrochemical Plants,MarineJettys. And excelent Experience in DCVG (2200Km),CIP(1600Km) Surveys .

Admin Asst

Process design, PFDs, P&IDs, Data sheets, Heat mass balances

Preparing specification for new project Supervisory for installation and startup Up to date of drawing (p&id,hookup,connection list,etc)

Electrical Design, Detail Engg in Oil & Gas. Also Expert in Powersystem Study(LF, SC, Relay Co, Motor Starting, Transiant Stability,etc). Abroad Exp. includes USA, QATAR.

Adrress:7/62,jalan kosas utama,taman kosas,Ampang

Mainly worked in the electrical system applications and well versed in development of protection schemes, preparation of relaying & metering drawings, including scope of work and technical specification for power projects/contracts.

Knowledge in troubleshooting Computer. Can Deal With other Operating System, Knowledge In MS-word, Excel, PowerPoint, Publisher, MS-Access and other MS Office. Can install hardware/software. Knowledge in SAP environment system. Can Operate Office Equipment such as Copier, Fax Machine and other.

Preparing design criteria, datasheet, specification, mechanical calculation and prepare calculation and shop drawing for storage tank and pressure vessels,

Peep/OFM expert, data manager, programmer, reservoir engineer

Boat technision, aircraft technision and designer

INSTRUMENT ENGINEER, WORKED ON FIRE & GAS, ESD SYSTEM, STEAM TURBINE, STARTUP BLOWER. GOOD KNOWLEDGE OF PLC, DCS & SCADA.

Highly motivated and experienced MAINTENANCE SUPERVISOR.

ndt, api, aws inspections supervisor 35 years exp. chemical palnt, pipeline and oil field, currently 17 years at chemical plant supervise mech. Intgrity and PSM programs, plant site maintenance supervisor, ground, rr track, ditches, building, etc

Visionary and Enthusiastic style, team player with a winning attitude

Worked with International Oil Companies for 25 years, with experience as a Floor Man.

2 year appreticeship at ammonia plant of fauji fertilizer co(ltd)pakistan.5 years working experience of synthesis gas compressors,ammonia compressors,co2 removal(gas seperation)section of 1270ton/day capacity ammonia plant.responsible for plant startup/shutdown and smooth operation safely.

3 yrs International on shore experience- 5 yrs experience on top drive –1yr experience on barge rig –3yrs experience on ac drive – 17 yrs experience dc drive – 2 yrs experience on cyber controls- 1yr experience on china rig –valid well control certificate Iwcf-20 yrs experience drilling rigs / hav

Driver

Dutch Process operator with 20 years Experience ,Siemens S.P.7 Software WinCC and DCS

As a technological process engineer at The Main Platform I am alternatively dealing with two kinds of jobs: in the field and in the control room.

Front end setting in ,pipebending,fabrications,lower & lay,tie-ins.

I am an Unlimited Oceangoing Master with more than 15 years experience as Captain, ten of which are on Offshore Support Vessels.

With seventien years of diverse experience,I have a broad base of skills to offer.I have expertise in production,commissioning,construction,fabrication,process variables, processing,projects,marine loading off-loading and Modern Safety management systems and with a special interest in Pro-active Sa

I am a qualified and Certified RED SEAL ELECTRICIAN / E&I Supervisor with a broad background within the Petro-Chem industry both on and offshore. Experienced in leading teams, self-motivated with excellent communication skills, can drive change and motivate individuals to enhance company performa

17 years experience as a Piping/Mechanical Draftsman/Designer in the Oil & Gas industries (Offshore and Onshore facilities). Proficient use of design software include AutoCAD 2008i, PDMS to model and generate 2D drafting and also MDS design software to design and model pipe support.

Senior Geologist

Mechanical engineer with 20 years exp.

More than 15 years extensive experience in Instrumentation and Controls in the Oil and Gas Industry (on/offshore) in International locations. With various responsibilities on design & application, project management support, construction, commissioning, inspections and maintenance which includes l

Piping Design Engineer and PDS Administrator

T3 National Diploma Electrical Engineering (Instrumentation), Instrument / Analyser enginering, design ,project implementation & project management. Process control , Safegaurding design, DCS, Optimisation| , Oil Movements & product quality, LPG& Marine, Terminal & LPG design.

My skills include, but are not limited to diesel engine rebuilding,hydraulic equipment repair and modification, troubleshooting and repair. Drilling equipment, cranes, forklifts and are some I have experience with. Mechanical equipment includes Cat engines, Drawworks, Mud Pumps, TDS9S, TDS11S.

I am a chemical engineer with 12 yrs experience in petrochemical plant & operation.I beleive that I can do my best for my employer and you will be satisfied from my job and activity.you can try me.Im expert in chemical cleanning of pipes & instruments as in my resume.

DCS, PLC, SCADA and training.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 [ 41 ] 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out