Resume - Quality Specialist experienced in Quality Management System, being aware of spec...

Misco Jobs

Resume #68718

CONTACT INFORMATION:
View contact information...

- QA/QC Engineer -

PERSONAL PROFILE

Quality Specialist experienced in Quality Management System, being aware of specific Inspection Techniques, including NDT Techniques (UT, MT, PT) and offering over 25 years experience in QA/QC environment acquired in Metallurgy (Rolling Mills for Steel Products) and Construction (Prestressed Concrete Cylinder Pipes and Fixed Offshore Structures).

EMPLOYMENT

PETROM SA, Romania (Member of OMV Group) / IMPaC Offshore Engineering GmbH Germany – Petromar Offshore Upgrade & Development Programme (Black Sea).

Project Quality Coordinator (Client Representative) (May 5, 2008 to present)
* As part of an Integrated Project Management Team of Petrom SA I am responsible for capturing and reporting all Quality issues requiring resolution, being the primary offshore interface with contractor.
* Liaising with the Contractor's/Supplier's representatives for scheduling all witnessing and inspection activities as identified within the Programme Quality Plans and Inspection & Test Plans.
* Monitor inspections during operations (onshore and offshore) to ensure these activities are completed in a safe and efficient manner and meet both technical and contractual requirements.
* Perform Site inspection by visiting suppliers/plants, being responsible for expediting completion and delivery of materials and equipment to ensure conformance with purchase order agreements and project requirements.
* Witnessing the construction of Jackets, Platforms, Modules, and offshore hook up at EPC Contractor and Subcontractors sites.
* Maintain Quality audit schedule and perform Contractor Quality audits as required, ensuring timely closeout of audit findings.
* Responsible for establishing and ensuring that preventive actions are implemented and corrective actions are taken within my area of responsibility.

SAIPEM S.p.A. Italy – Kashagan Offshore Project on Caspian Sea, Kazakhstan - Piles and Flares Installation.

QA/QC Supervisor (May 8, 2006 to September 30, 2007)
* Reporting to the QA/QC Project Manager, maintaining liaison link between Barge Superintendent and Field Engineer, I supervised all the quality matters of the Offshore Installation of Piles, Flares Process and Utility Barges;
* Prepared the Project Quality System procedures and Quality Plans in San Giuliano Milanese Office, Italy;
* Maintained an update status of progress against the installation plan by checking completion and signing off;
* Monitored the collection of "As built" data for project;
* Surveyed and verified that scheduled testing and inspections were performed and documented during the execution of work as required by site Quality Control Plans and reference standards;
* Supervised the work of the Quality Inspectors team (Welding Inspectors and NDT Inspectors);
* Coordinated quality meetings with the Client, construction contractors, and site supervision personnel, in order to analyze and contribute to the solution of quality-related problems;
* Temporarily deputised in the position of QA/QC Supervisor - Client Site Representative in Kuryk Yard, surveying the construction works for offshore activities at ER SAI Caspian Contractor LLC (Subcontractor of Saipem).

SC VEMA&COMP SA Deva - Romania: Manufacture of Steel Components by cutting, welding and machining for various branches of equipment, railroad car and road vehicle building industry.

QA/QC Manager (November 1st., 2005 to April 7, 2006)
* Reporting directly to the General Manager, provided leadership for developing and directing Quality Management System and quality improvement for all products and services;
* Maintained all the necessary documentation related to Quality system, ISO and other industry guidelines;
* Organized and implemented the internal audits and supplier audits;
* Managed and maintained the Company's Quality inspection and product release programs for incoming and in-process materials and components, machined products, and finished goods;
* Conducted in-house training and awareness programs for QA/QC Inspectors;
* Managed Customer Complaints;
* Monitored Non-Compliance reports and took corrective actions to assure timely completion.

SNC LAVALIN INTERNATIONAL Inc. Canada/ SARIR PCC PIPES PLANT Libya (Great Man-Made River Project – Phase 1): Manufacture of Prestressed Concrete Cylinder Pipes.

QA/QC Engineer (May 1st., 2003 to December 10, 2004)
* Reporting directly to the QA/QC Manager for all project tasks and approvals, involved in all major areas of Pre-stressed Concrete Cylinder Pipes and Special Pipes Manufacture, I planned and supervised shop inspection program to ensure that products comply with contractual requirements;
* Established and maintained a close working relationship with all project inspectors, the Client and Lead Discipline Engineers on all quality related matters towards the success of the project. Fully knowledgeable on the application of construction codes and standards and Quality Management Systemm based on ISO 9000 series;
* Developed Quality Inspection and NDT procedures and contributed in the implementation of the Quality System;
* Evaluated deficiencies and issued nonconformance reports when applicable;
* Monitored the everyday schedules of final inspections with the Client witness;
* Prepared final quality record documents for the Client.

SC SIDERURGICA SA Hunedoara - Romania: steelworks, foundry, rolling mills for round and square bars, steel wire, sections.

QA/QC Engineer - Rolled Steel Products (November 1st., 1990 to March 3rd., 2003)
* Supervised the work of a Quality Inspectors team (20 to 30 Inspectors);
* Responsible for the application of Quality System (in respect of procedures) in the site and developed Quality Inspection Procedures;
* Systematically recorded and handled nonconformity reports issued on site, ensuring that the resolution of nonconformities met the acceptance criteria and that timing complied with site requirements;
* Adjusted and decreased complains referring to unsuitable quality of several products, by visiting or talking to clients about technical issues or problems;
* Defined and put in practice corrective actions for the improvement of products' quality;
* Operated nondestructive ultrasonic testing for special products;
* Prepared and presented technical and program information to the QA/QC Manager.

SC SIDERURGICA SA Hunedoara - Romania: steelworks, foundry, rolling mills for round and square bars, steel wire, sections.

Quality Inspector (November 15, 1980 to October 31, 1990)
* Inspected the rolled steel products (visual inspection and nondestructive ultrasonic testing);
* Administrated and registered Quality Documents (typing quality certificates, document's archive).

EDUCATION

* Bachelors Degree in Metallurgy - Plastic Strains and Heat Treatments - Polytechnic Institute "Traian Vuia" of Timisoara / Engineering Institute of Hunedoara, Romania (1985);
* High School Diploma in Metallurgy - Rolling mill Operator - Nr.1 Industrial High School of Hunedoara, Romania (1979);
* NDT Courses: Ultrasonic Testing Method, Liquid Penetrant Method and Magnetic Particle Testing Method (level II);
* Course Certificate – Quality Management System Documentation (ISO 9001:2000) – Chamber of Commerce, Industry and Agriculture Timisoara, Romania / (2005);
* Course Certificate - Internal Auditor for Quality Management System (ISO 9001:2000) - SIMTEX Certification Body of Bucharest, Romania (2005);
* Specialization Course – Quality Specialist - Chamber of Commerce, Industry and Agriculture Timisoara / Ministry of Labour, Family and Equal Opportunities & Ministry of Education and Research, Romania (2008).

MISCELLANEOUS

* Mother tongue: Romanian
* Foreign languages:
- French (advanced level);
- English (advanced level);
- Italian (medium level, in course of perfecting);
- Spanish (beginner level, in course of perfecting)
* Computer skils: Word, Excel, Internet
* Driving licence: B
* Personal Safety Logbook – Basic Offshore Safety Introduction and Emergency Training (BOSIET), Air Pocket Plus Training, Properties Danger Aspects and Measurements of Hydrogen Sulphide – NUTEC Rotterdam, The Netherlands B.V., (August 2006)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2101 to 2150 of 10902)

Go to Search Parameters...

Brief Description

I am a HVAC /Electrical Lead technician with 22years experience 19 years in Multi-national oil companies both onshore and offshore for production platforms and perform preventive maintenance activities, job scheduling including preparation of JSA with relevant parties .

Electrical Engineer

Workover/Completion Consultant/Supervisor

Production foreman with twenty years of experience in oil and gas industry.

Occupational Health and Safety Engineer with Industrial Hygiene Background. Worked on Variety of Oil & Gas Project

Working with Multinational Oil Company HALLIBURTON WORLD WIDE LTD, in Pakistan as a Senior Service Leader.

Accomplished Engineer With 14 Years Of Diverse Experience In Production, Planning, Materials Management

Equipment handled are : Feed Treating, Reforming, Purification, Synthesis Gas Loop, Ammonia Refrigerant System.

I am a fully qualified Cost Engineer and Estimator and have contract claims experience. Please see resume for details.

Senior Executive with verifiable performance in the fields of Project / Operations Management and Techno-Commercial management in Shipyards and Oil & Gas industry.

Two Masters Degrees in Hydro-Geology and Geology from the top ranking university in India. Over 17 years of GIS and AM/FM/GIS working experience with leading companies in Asia and Middle East. Involve in large-scale projects with major clients across the Globe implementing GIS and AM/FM/GIS project

International logistics

Quality Specialist experienced in Quality Management System, being aware of specific Inspection Techniques, including NDT Techniques and offering over 25 years experience in QA/QC environment acquired in Mettallurgy and Construction (Prestressed Concrete Cylinder Pipes and Oil&Gas Inst.)

Worked for several drilling companies, service and maintenance organizations during my career. Managed large numbers of personnel in most of these companies. Known for effective time and cost saving procedures. Excellent safety record, proficient in human relation skills, self-starter, task orientat

Extensive experience as a Project Manager with a focus on facilities design & construction, oil and gas regulations and environmental concerns. Responsible on all projects for design, material specs, P&ID ‘s and coordination of construction.

B. Tech in Metallurgical Engg, 27 years experience in Corrosion & Inspection function in refineries

With 20 years experience in all types of Construction especially in Oil & Gas.

Total of 27 years experience in Inspection, Quality Control and Non Destructive Testing of Pressure Vessels, Heat Exchangers, Piping and Structures for Petrochemical Plants, Power Plants, Rigs, Ships and Storage Tanks both at the time of fabrication and on-stream stage.

Senior Piping Designer with experience through both contract and direct work assignments, with major emphasis in the areas of Specialty Chemicals, Pharmaceuticals, Petrochemicals, Sulfur Recovery, Heavy Industry, Gas Turbine & Power Generation.

B.sc Petroleum Engineering, Model 204, SAS, Oracle, Oil and Gas Database Conversion, Production Engineering, Reservoir Engineering, Supported Petroleum Engineering application (Pipeflow, Pipesim)

Senior Petroleum Engineer with long experience in Oil & Gas Industry

Experienced LNG & Petrochemical plant commissioning and maintenance activities in Electrical field. Petrochemical and Utility plants instrumentation experience is an additional experience

I am a certified professional engineer with MBA and having 17 years of Contracts & Procurement experience in Oil & Gas and Powers sector.

Sr. Interpretation Geophysicist w/exploration & reservoir development experience

Instrumentation Engineer, Detailed Engineering for offshore, FPSO, oil/gas,steel plants

Over 25 years experience in the oil & gas and heavy engineering industries involving all contractual and commercial aspects of project controls works covering:- proposals management; contract preparation / tendering / administration; capital budget / forecast / cost control; and contractual claims.

Mech Engr with 22 yrs exp in power plant projects, working with Thermax Babcock & Wilcox Ltd.

Expert in Industrial Gas & oil separation plants (GOSP), Gas Terminals and Stations.

Significant record of managerial and administrative contracts experience in the petrochemical, power and telecommunications industries consisting of development, drafting, negotiation, execution, management and administration of contracts and licensed technology agreements.

MANAGEMENT Able to make sound prompt decisions encompasing a diversity of areas: From design and implementation through to resources and progress strategies.

Experience in reliabilty centered maintenance and Mechanical Integrity. Extensive experience with Project engineering.

17 years experience in procurement and supply chain management in Marine, gas, oil field. Post graduate in materials management from IIMM Bangalore India. Worked with majors viz. Halliburton Inc Houston TX, supreme food service AG Ziegelbruckestrasse, Switzerland , Dubai dry docks Dubai UAE

I introduce myself, i am an Electrical Engineer worked in IRAN under Hyundai Engineerung & construction co. for South pars Field Developement Phase 4 & 5 and before Phase 2 & 3 also.

I am wireline supervisor and consultant - I have a long experience

More than 30 years on operations,pre-commissioning and commissioning

at present working on cyberbase rig totally computerised

Experiences: Oil / Gas Field Facilities, Pipeline and Production Plant Operations, Commissioning and start up

Professional Drilling Consultant

Welding Suprintendent / Supervisor

PIPING DESIGN ENGINEERING

For the past 15 years I have been employed in petrochemical piping & Power Plant design & drafting utilizing Autocad, Microstation, 3D CADWORX, Plant 4D Programs and Field surveying using Total station and 3D Leica ScanStation 2, using Cyclone and CloudWorx programs to obtain as-builts of existing f

Studying M. Sc I Year (Environmental Science) in Distance Mode B. Sc Diploma in Occupational Safety Health and Environment ,First aid training

Free! An MBA graduate with 6 years of work experience in the oil and service-related industries. Experience in ESP, HPS, VSDs, PLCs, HMIs, and SCADA systems. Additionally, I have experience in project management.

Planning Engineer, Workshop Management, Maintenance and Material control, Safety Officer, AutoCAD, Fleet Management System Software(FMS),IVMS Download, Internet Skill, MS Word, Ms Excel, Corel Draw, Primavera Project Planner (P3), Ms Project, Power Point, Ms Dos, Publisher, Page Maker, Etc

9 years of rich work experience in Project Controls, Planning & Scheduling functions in the field of Oil & Gas, Petrochemical/Chemical Plants.

Having more than Twenty (20) years of experience in the field of Supervision and Inspection of Welding, Piping Fabrication and Installation in the Heavy Industrial construction such as Oil and Gas Plants, Power Generating Plants, Petro-Chemical and other Industrial Insta

Fifteen years of rich and cross cultural experience in Instrument Construction Supervision, Instrument Inspection, Commissioning and Troubleshooting Maintenance Work of all types of Instruments.

Radio Operator / AB Seaman

B. Sc. with Chemistry along with the 14.5 years of professional and project in petrolium refinery . Precommissioning & commission assistance in, LPG RECOVERY , ACID GAS REMOVAL , FUELGAS/NAPTHA RECOVERY

Free! All round drilling expertise from driller up to management. Managed on- and offshore drilling campaigns world-wide. Shell Round II. Currently head of drilling rig planning, acquisition and divestment for Shell Malaysia. Analytical and problem-solving capabilities. Broad engineering background.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 [ 43 ] 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out