CONTACT INFORMATION:
View contact information...
Educational Background
Highest Qualification: Diploma in Electrical Engineering (Power)
University/Year: Malaysia University of Technology, 1985
Objective
Commissioning manager, Commissioning Superintendent, CSR Commissioning coordinator, Mech, E & I Commissioning Engineer, Plant Operation/Maintenance Executive, E & I QA/QC Engineer/Inspector/Supervisor.
Willing to travel, move or relocate domestically or internationally except NIGERIA
Expected Salary and Availability
Expected Monthly Salary: USD5000-00 (Negotiable)
Willing to Relocate/Travel: Yes/Heavy (>50%)
Availability: 1 month notice.
Summary of experience
Over 21 years of management and hands on experience in a field of Procurement, Fabrication, Installation, Commissioning start up, Operation and maintenance activities. Related to Oil & Gas marine, On & offshore structure, Ship repair and EPC fabrication work, Petrochemical, Utility plant, Factory and Mills. Major emphasis in Mech, Elec (Low Voltage up to 132Kv), Inst and control system on & offshore testing and commissioning with a high level of HSE awareness. Including QA/QC and commissioning procedures documentation works. Familiar with software and methodology use for Inspection, Commissioning, Project supervision and Maintenance management works. Proficient in reading and understand various type of drawings. Experience in meeting API, ASME, IEC 60079, BS, NEC/NFPA 70, Shell, Exxon Mobil & Petronas engineering and safety standards, Code and practice requirement.
Employment History
June 2007 ¡V Present
L & T ECC Consortium (Malaysia) Sdn Bhd.- MNC EPCIC Contractor.
Position: Electrical & Instrument Inspector.
Malacca Petronas Second Refinery Group III lubricant base Oil Project.
Actions / Responsibilities
„X Implementation of quality control procedures and policies to ensure field activities conform to project's specifications.
„X Checking and implementing changes of any discrepancies of electrical and instrumentation design drawings and specification to suit actual field condition and requirements.
„X Review and checking of contractors quality plan, documentation, procedures, method statements, test forms, commissioning procedures and documentation.
„X Inspects work performed by E & I contractor and maintains up to date inspection record files.
„X Generates inspection reports and ensures appropriate action taken on non-conformance installation or deviation from specification.
„X Verification and conformity Inspection on Electrical and instrument materials and equipments supplied by owner and contractor.
„X Witness third party inspection, lead contractor in testing and pre-commissioning of electrical, instrument and control system.
Dec 2000 ¡V May 2007
BMS Consulting Engineers Sdn Bhd.- Mech, Elec & Instrumentation Consultant.
Position: Inspection Engineer.
Various Project / Existing Installation in operation.
Actions / Responsibilities
„X Perform & supervise Compliance, Verification, Risk based and condition monitoring Inspection on & offshore.
„X Testing, Pre com, Initial start up, Commissioning and Verification of Maintenance works at various types of plant including Petrochemical, Power, Water treatment, Offshore platform, FPSO, Ship and Vessels, Drilling barge, Factories, Oil Mill, Shopping complex, Hospital, Quarry etc.
„X Conforming that existing Installation condition and project work completion are complying to relevant Specification, Standard and Requirement.
„X Ensuring that Plant & Equipment are performing and operating in safe and good condition.
Aug 1994 - Nov 2000
Malaysia Marine and Heavy Engineering Sdn Bhd.- Shipyard and Offshore EPCIC fabricator.
Position: Commissioning Engineer to Section head.
Various Marine and Offshore module Project.
Actions / Responsibilities
„X Study Shipyard and EPC fabricator Testing & Commissioning Scope Of Work.
„X Develop work plan, Schedules, Procedure, Documentation work and Its completion within time & budget.
„X Carrying out construction installation Conformity, Verification and Authenticity check on board marine and offshore module.
„X Management and hands on participation on On/Off shore Testing & Pre Commissioning activity.
„X Job involved Leak test, Function test, Load test, Certification test, Leveling, alignment, balancing, vibration monitoring, Continuity check, Insulation test, Interfacing test, Verification test, Loop check, Calibration, Logic check, Trouble shooting, Fault finding, Resetting, Problem remedial and rectification on Installation, Machinery, Process skid installed on board covering Mechanical, Electrical, Control and Automation discipline.
Jan 1993 to Jul 1994
System Protection & Maintenance Sdn Bhd ¡V Electrical & Instrument Contractor.
Position: Testing and Commissioning Engineer.
Malacca Petronas Second Refinery-1 project.
Actions / Responsibilities
„X Responsible for Testing and Commissioning work for Electrical work package Covering 132Kv refinery main intake Substation, all the way down to more than 11 no of 33 to 6.6 & 0.415 Kv distribution Sub station scattered all over entire refinery.
„X Direct hands on participation of testing and commissioning activity at an early stage and coordinating T & C activity at later stage, as project progress to middle stage.
„X Job involved Testing, Calibration, function test, pre energizing check and test, energizing and commissioning of Medium & High Voltage cable, Protection relay, Switch yard, Transformer, Switchgear and ancillary equipment installed by the company.
Jan 1990 to Dec 1992
Antah Biwater JV Sdn Bhd.- MNC Water Treatment Plant Contractor.
Position: Commissioning Engineer
RM 1.6 Billion Malaysian Rural Water supply scheme project.
Actions / Responsibilities
„X Responsible for Testing and Commissioning SOW on 174 No of Water Treatment Plant comprising raw water intakes, treatment works and transmission system complete with booster and pumping station.
„X Duties include Conformity, Verification, Authenticity check on construction installation. Testing, Pre Commissioning, Process start up, Commissioning test right up to Performance, Endurance and Reliability test of entire plant and its reticulation network.
„X Job involved coating thickness inspection, Leak test, Function test, Load test, Certification test, Leveling, alignment, balancing, vibration monitoring, Continuity check, Insulation test, Verification test, Loop check, Determine setting, Calibration, Programming, Debugging, Logic check, Trouble shooting, Fault finding, Resetting, Problem remedial and rectification on Installation, Machinery, and Process equipment installed covering Mechanical, Electrical, Control and Automation discipline.
Nov 1988 to Dec 1989
Malaysia Marine and Heavy Engineering Sdn Bhd.- Shipyard and Offshore Module EPCIC fabricator.
Position: Maintenance Technical Executive
Daily Yard Operation & Maintenance.
Actions / Responsibilities
„X Responsible for cost effective operation and maintenance management of yard electrical utilities and facilities.
„X Management of daily operational activity. Corrective, Predictive and Preventive maintenance.
„X Carrying out Operational contingency and mitigation planning.
„X Perform risk based inspection and Condition monitoring maintenance.
„X Job involved an application of various management tools and software such as Root cause analysis, Life cycle cost analysis and CMMS.
Jan 1986 - Oct 1988
Malaysia John Holland Sdn Bhd.- MNC Railway Engineering Contractor.
Position: Electrician to Electrical Supervisor.
Malaysian Railway Track rehabilitation project.
Actions / Responsibilities
.
„X Responsible for maintenance of Electrical and Electronics system on Railway Engineering heavy construction Machinery such as Track Tamping machine, Flash Butt regulator, Track condition monitoring machine, Ballast regulator machine, Overhead gantry crane, Portable Generator, Welding machine, Lighting system, Compressor and blower.
„X Job involved trouble shooting, repairing and reprogramming of conventional and PLC Control system of the above machinery that work mainly on hydraulic & pneumatic system.
Skills/Proficiency
(Proficiency: Advanced - Highly experienced; Intermediate - Familiar with all the basic functionalities; Beginner - Just started using or learning the skill)
Skill Years Proficiency
Exposure to Diesel, Gas & Steam Turbine Prime Mover >10 Advanced
Working with Hydraulic & Pneumatic System >15 Advanced
Perform hands on live system switching (lv & hv) >15 Advanced
Industrial Motor & Control >15 Advanced
Well versed with switchboard equipment & devices >13 Advanced
Well versed with lv & hv control & switchgears >17 Advanced
Hands on application of Elect test & diagnostic equipment. >17 Advanced
Hands on application of Inst test and diagnostic equipment >15 Advanced
PLC Programming >15 Advanced
MS Word, Excel & Access >10 Advanced
Win PCS,OPERCOM,CMMS software >5 Intermediate
Risk based Inspec'n Software >5 Intermediate
HSE Methodology
(JSA,JHA,PTW,LOTO
HAZID,HAZOP) >12 Intermediate
Languages
(Proficiency: 0=Poor - 10=Excellent)
Language Spoken Written
Malay 9 9
English 9 9
Course/Seminar/Training attended
1. Electrical safety - Prevention of electrical accident.
2. Marine electrical inspection.
3. Introduction to Gas turbine for non mechanical engineers.
4. Seminar on CMMS Maintenance management.
5. Quality auditor training.
6. Introduction to PLC.
7. Industrial First Aid & CPR course.
8. CPR Course.
9. BOSIET+HUET+BT ¡V OPITO Approved. (Expired 19/02/2012).
10. Hazardous area, Classification & equipment.
11. High Voltage operation & maintenance.
12. Generator technology, Design & Operation.
13. NIOSH Petronas Safety passport Course. (Exp: 06/12/2010).
Membership/Affiliation
-Certified as an internal auditor by Neville Clarke International Ltd. to carry out in House
ISO9001 compliance and surveillance audit.
-Certified as a Competent Electrical Supervisor by Malaysia Energy Commission to handle live switching and supervision of an electrical installation.
-Student Member(pursuing full membership) of International Gas Turbine Institute(IGTI-
ASME).
References
Will be provided
View contact information... |