Resume - Six years of solid experience in Process Control and Automation Engineering. Han...

Misco Jobs

Resume #68826

CONTACT INFORMATION:
View contact information...

PPROFESSIONAL SKILLS
 Software: Extensively trained in the system configuration, setup and troubleshooting of DeltaV, Safety Instrumented Systems and AMS Device Manager. Proficient in PLC programming using RSLogix 5, RSLogix 500, and RSLogix 5000. Experienced in Human Machine Interface programming and development using PanelView, RSView, Wonderware InTouch and Intellution IFix.
 Hardware: Experienced in the design, configuration, commissioning and troubleshooting of the Emerson DeltaV DCS, SIS and Allen Bradley Industrial Automation systems involving PLC 5, SLC 500, ControlLogix, Micrologix, 1336 VFDs, and PanelView. Specializes in Fieldbus technologies. Technical know-how on Electrical Panel Wiring and Layout. Familiar with Power and Grounding Systems and Field Instrumentation. Good laboratory skills using Hewlett Packard and Fluke test and measurement instruments, as well as Emerson's Handheld Communicators. Familiar with RF and microprocessor-based circuit design and implementation of wireless communications.
 Adept in Microsoft Office Applications and Windows® based software.
 Highly motivated team player experienced in planning, organizing and implementing a project. Driven self starter and quick learner.
 Very good oral and written communication skills in English and Filipino and can speak and write in conversational Spanish. Achieved an IELTS score of 9.0.

PROFESSIONAL EXPERIENCE
July 15, 2002 - Present
Emerson Process Management, Global Service Center - Pasig City
Consultant / Principal Technical Support Engineer / Team Leader
 DeltaV IO Team Leader. Heads the IO group in continually improving work processes and team performance, minimizing the backlog and effectively managing critical and political IO calls.
 Specializes in DeltaV IO (Classic IO, HART, Foundation Fieldbus, AS-i bus, Profibus, DeviceNet and Serial Modbus), DeltaV Safety Instrumented Systems (SIS), the AMS Device Manager and the Handheld 275 and 375 field communicators.
 Provides 24/7 Technical Support, troubleshooting, problem analysis, consultation and remote diagnostics to engineering organizations and end-users of the Plantweb/DeltaV Distributed Control System and the AMS Device Manager Software Suite
 Works closely with Product and Design Engineering and other Emerson divisions worldwide to provide timely solutions to customers
 Qualified as a Full Time Engineer to support the North American and Latin American world areas, based on technical competencies, English proficiency and ability to communicate in Spanish
 Achieves company target of closing more than 80% of Technical Support Calls within 24 hours, which positively contributes to the team's overall performance and customer satisfaction metrics
 Trains and mentors junior engineers and generalists. Develops educational materials for in-house training
 Maintains pro-active issue monitoring of key customers and hot sites
 Authors Knowledge Base Articles to address and document product issues
 Extends onsite assistance to end users and Emerson Business Partners abroad (Mexico, Taiwan, New Zealand, China and US).

April 2000 – May 2002
Philippine Industrial Automation, Inc. - Mandaluyong City
Project Supervisor / Automation Engineer
 Involved in the analysis, system design, costing, implementation, commissioning and documentation of cost-effective automation solutions based on customer requirements and specifications
 Conducted various technical trainings for plant engineers, operators and technicians
 Provided onsite technical support and emergency services to clients
 Successfully completed various system integration projects such as:
- Control Improvements on a Boiler Dosing Control System for a 1200 MW coal fired power plant
- Automation of the Control System for a Cement Plant's Raw Mill
- PLC and HMI Programming of the HTST Process Line for milk based beverages

EDUCATION
June 1994 – October 1999
University of the Philippines - Diliman, Quezon City
Bachelor of Science in Electronics and Communications Engineering
*Passed the ECE Licensure Exam on November 2001 with above average ratings

SEMINARS AND TRAININGS ATTENDED

December 2007
DeltaV Safety Instrumented Systems (SIS) Training
Emerson Process Management (Rayong, Thailand)

December 2006
CCP164 - DeviceNet and RSNetWorx Configuration and Troubleshooting
Rockwell Automation (Tampa, Florida)

October 2006
Emerson Global Users Exchange 2006
Gaylord Opryland Convention Center (Nashville, Tennessee)

August 2006
5590 -Power and Grounding Course
Emerson Process Management (Manila, Philippines)

April 2006
DeltaV Migration to Version 8.4
Emerson Process Management (Manila, Philippines)

June 2005
DeltaV Migration to Version 7.4
Emerson Process Management (Manila, Philippines)

August 2004
MS2272 - Implementing and Supporting Windows XP Pro
DB Wizards (Makati City, Philippines)

November - December 2002
On the Job Training
Emerson Process Management (Mexico City, Mexico)

August - September 2002
Comprehensive DeltaV Training
Provox Overview
RS3 Overview
FR0002 Service Certification Course
7011- DeltaV System Integration
7034- Communication Bus Interface with DeltaV
7050- DeltaV Version 4 to 6 Transition
Emerson Process Management Educational Services (Austin, Texas)

July – August 2002
Introductory DeltaV and AMS Training
Windows NT 4.0 and Internetworking with TCP/IP
7024 -DeltaV Systems Administration - Fix32 version
7010 – DeltaV Implementation
7016 - DeltaV Batch
7018 - DeltaV Hardware and Troubleshooting
7020 - AMS User Training
Emerson Process Management Educational Services (Mapua Institute of Technology, Philippines)

February 2002
Interfacing Wago IO with Siemens/AB PLCs
WAGO Singapore (Mandaluyong City, Philippines)

November 2001
DeviceNet Seminar
Rockwell Automation (Makati City, Philippines)

May 2001
1336 Drive Troubleshooting and Board Replacement Seminar
1394 Servo Motor Configuration and GML Programming Seminar
Rockwell Automation – Asia Pacific (Bangkok, Thailand)

REFERENCES
To be provided upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2751 to 2800 of 9772)

Go to Search Parameters...

Brief Description

BSC in Mech. Eng., post grad. in Petroleum Eng., reservoir engineering exp.( developing and management, black oil, gas and composition reservoir simulation, tech. and econ. eval. Studies, IOR and EOR methods-8 yrs.) and IT consulting, services and project management (12 yrs.)

I have robust bases in the quantitative and qualitative expertises of oil productions raw product and refined, the controls of expeditions by pipe, vessels or lorries. This experience(experiment) allows me to transpose my knowledge in sectors of industry as the mining extraction.

Mechanical engineer specialised in naval welding with 15 years experience seeking a full time job.

I am extremely interested in working in Australia, either as a client rep or contract rep. My background and experience qualifies me for several positions, such as; Project Engineer, Planner/Scheduler, QA/QC, E&I, however, my main interest is Fabrication Manager or Project Manager.

2002- Present Head of Upstream Joint venture of NPC/SASOL 1998- 2000 Sr. Process Eng. IOOC / TS (TOTAL SIRRI) 1994- 1998 Production Eng. SIRRI /KHARG/LAVAN ISLAND

Skilled HSE professional seeking employment

To expand my knowledge, enthusiasm & ability by assuming a position of higher responsibility, with the qualities of adaptability, dynamism & perseverance.

Junior well engineer, Design engineer

Qualification: MSc Corrosion Control Engineering Experience

Simon graduated from the University of Buea with a B.Sc. Hons. Degree in Geology. He joined the Rural Medical and Environmental Foundation (RUMELF) in Buea and when he left in 2004, he had attained the position of a Geoenvironmentalist. When he left RUMELF he resumed studies at Vrije University Amst

Working in oil refinery qatar since 2000 as a general technician electrical maintenance.

Instrument Engineer

Skills: First rate negotiator,Excellent Communication Skills, Excellent Organizational Skills Good team work Spirit, Excellent I.T. Skills.

Bachelor's in Commerce plus Mechanical Diploma

Production engineering, production supervision of field with 50 production well+ 2 injectors. Optimization of operations, supervision of workover , reentry operations for old wells. Experience is only within Kazakhstan.

13 years experience of operating different kinds of plant as a control room operator,senior operator,and plant operator at oil and gas and petrochemical plants.

EXPERIENCED IN PIPING DESIGNER AND PLANT ENGINEERING, KNOWLEDGEABLE IN PIPING DETAILED LAYOUT, PIPING PLANS (G.A), PIPING ISOMETRICS, LINE LIST, SPECIAL ITEMS LIST, MTO’S AND SPECIAL PIPE SUPPORTS WITH RESPECT TO PLOT PLANS, LINE LIST, PFD’S, P&ID’S AND OTHER RELATED INFORMATION DRAWINGS.

Telecom engineer/technician SDH,CCTV,PABX

Petroleum Engineer with 7 years experience in the oilfield.

With 7 years of rich experience in Plant Operations, Production. Presently working with Niko resources Ltd., as a Lead Production Operator.Functional expertise in handling the production operations with key focus on bottom line profitability by ensuring optimal utilization of resources.

Nace 1 Coatings Inspector

I have over 15 years of experience in this field and acquired enough knowledge. I had handled very challenging assignments. As an Instrument foreman I was fully involved in my business wherein I had to identify potential opportunities and gain wide knowledge.

US Citizen, Petroleum E&P Support Advisor/Team Lead /Managing Consultant with superior Vendor-Certified Petro-Computing skills and extensive experience in Multi-Vendor/Multi-Applications User Support, Training and Mentoring for Exploration, Appraisal & Production

I have ten years experience in SITEP (ENI partner) and my qualification is Maintenance supervisor

Production supervisor/production operator/ on job trainer

5 Years Experience in Piping and PDS

Six years of solid experience in Process Control and Automation Engineering. Hands on expertise with Rockwell Automation, Emerson DeltaV Control Systems and AMS Device Manager. Has excellent communication, creative problem solving and effective project management skills.

Mechanical Engineer - Heat Transfer/Static Equipment

Analyzer Engineer

I am chemical engineer seeking position is Production, process and design. I am harworking and good learner of new technology. I have excellent interpersonel skills and organisational skills.

I can do IV,im,sc,infusion injections,periphery veins catheterisations,work with subclavia catheter.Blood, urine, sputum, samples taking for tests, blood group determination, blood transfusion, medicines, record keeping. Duodenal catheterisation. Stomach washing, nasogastral, urinal catheterisation.

I am a mechanical engineer with experience in the Power Generation industry. I have worked for Siemens/Westinghouse as a field engineer, managing gas turbine upgrades and repairs. Also I have worked for Air Products supervising hydrogen plant construction and operations. My background also includes

Directed the operations of a multi-specialty physician practice including budget analysis, credentialing, procurement, expense reconciliation, benefit administration, and staff supervision.

A result oriented professional with proven abilities in plant Electrical & control system. Preventive & Breakdown Maintenance in the field of Oil & Gas and Petrochemical Industry. Installation, Maintenance & Trouble shooting of Electric drives, HT & LT Switchgears & Protection Relays, Control Panels

Master of Engineering ¡V Petroleum Systems, University of Regina, Canada

Electronic/Diesel Hydraulic/Controls Technical Writier with field and military experiance.

Drilling Technician

IT specialist, professionally qualified in Management and Computers(M.B.A Information Systems, Masters degree in Computers) with 10 years of proven hands-on experience in Computer System Analysis, System Support, System Administration, Networking, Database development and management.

A seasoned subsea systems engineer with a detailed understanding of trees, controls and manifolds from front end feasibility and conceptualisation to offshore installation and commissioning.

Chemical Engineer 1990 NIT Raipur ,Continuous Polymerization,Black Belt Six Sigma,Lead Auditor ISO 9001,14001

Project Management and Engineering Experience in Oil-Gas-Refining, commercial and other industrial sectors.

qualified in six modules of different aspects of corrosion,and the confidence gained throughout the years while running my own consultancy

MWD Engineer

Control system designer / instrumentation

Civil / Structural Designer, PDMS, AutoCAD,

Fire/Safety Advisor, 32 1/2 years petroleum experience

Quantitative Interpretation for Reservoir Characterization

13 Years Hands on Experience in Inspection (Plant Inspection) & Quality Control in Fabrication, Installation and Testing of Process & Utility Piping Work, Sub Sea Pipeline Work, Pressure Vessel and Offshore Steel Structures like Jacket, Deck, Bridge etc. in the field of Oil & Gas Development.

I am seeking a long term employment contract within a company that would offer advancement, a good starting wage, and benefits.

Past 20 years I been working as Document Controller, at present working for Saipem UK ltd as Senior Document Controller.

First Prev 51 52 53 54 55 [ 56 ] 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out