Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #68961 next resume »»
CONTACT INFORMATION:
View contact information...

Objective: Piping Engineer or Piping/Mechanical Pre-Comm. & Commissioning Engineer
Seeking staff position with opportunity to advance to construction engineering or commissioning engineering

Key Competencies:
- Nine (9) years of extensive working experience as piping engineer and piping/mechanical pre-commissioning & commissioning engineer engaged in various work responsibilities in engineering and in the field of piping and mechanical construction.
- Has relevant exposure in the construction of oil and gas facilities.
- Has proven ability in project engineering, construction supervision, inspection, pre-commissioning and commissioning, preparation of material estimates for piping and mechanical works.
- Familiar with international design codes, standards, procedures and engineering practices.
- Has comprehensive knowledge in the preparation of technical specification for piping works based on the applicable rules and provisions of ASME, ANSI, API and other international codes.
- Extremely experienced in conducting field inspection of piping constructions.
Computer literate. Knowledgeable in ConstructSim (Construction Simulation), PDMS, AutoCAD, Microsoft Office, etc.

Summary of Experiences:

- Experienced as a Piping Construction Simulation Engineer which is responsible for prepare piping engineering and construction simulation model. Prepare piping fabrication, installation and hydrotesting priority. Prepare piping fabrication work packages according to fabrication sequence. Prepare piping installation work packages according to installation priority and fabrication status. Prepare hydrotest work package according to piping hydrotesting priority. Prepare weekly piping simulation progress report of engineering material and fabrication status. Implement of piping fabrication, installation and hydrotesting work packages prior construction,

- Experienced as a Piping/Mechanical Pre-Commissioning Engineer which is responsible for review piping/mechanical pre-comm and commissioning technical drawings and documents including procedure, specification and vendor data. Prepare hydotesting, gross leak testing and high pressure (N2+He) leak testing procedure for client approval. Prepare pre-commissioning document and vendor data prior piping/mechanical pre-commissioning and commissioning execution. Joint inspection of piping line checking and mechanical inspection referring to the international standard & project specification. Sub-contractor coordination and supervision prior to execution of hydrotesting, chemical cleaning, gross leak testing, high pressure (N2+He) leak testing and passing of critical valve testing. Monitoring of mechanical equipment, E&I equipment and safety equipment installation according to installation procedure. Supervise of maintenance and preservation according to vendor recommendations. Prepare piping/mechanical check sheet and test sheet prior pre-commissioning and commissioning execution. Provide pre-commissioning and commissioning data for dossier completion prior hand over to hook-up team.

- Experienced as a Piping Engineer which is responsible for review clashing of piping design model by PDMS prior to designing. Review piping and pipe support fabrication shop drawings according to design drawings and standard prior to fabrication. Prepare piping and pipe support bill of materials and summary for material requisition. Monitoring of piping fabrication and installation activities according to standard drawings and project procedure. Site survey actual dimension for modification prior installation. Prepare ship lose material list for offshore installation. Check & review as-built drawings.

- Experienced as a Piping Senior Drafter/Designer which is responsible for review of piping design drawing by PDMS model prior to AFC drawings. Produce piping isometric and pipe support shop drawing according to design drawing. Re-design of piping modification or additional line by PDMS model. Prepared as-built drawings.

- Experienced as a Piping Drafter which is responsible for produce piping isometric and pipe support shop drawing prior to fabrication. Revised piping isometric and pipe support as per comment or actual condition on site.

Detailed Professional Experience

August 2007 to Present
J. RAY Mc DERMOTT Middle East, Inc. (Dubai, UAE)
Position: Piping Construction Simulation Engineer

Project Undertaken:
MAERSK – Al Shaheen Field Development Project,
Client/Owner: MAERSK OIL QATAR as Co. Ltd.

QATAR GAS – QG3&4 Offshore Facilities Project,
Client/Owner: QATAR LIQUEFIELD GAS Co. Ltd.
"QG-7", "QG-8" and "QG-9 " Deck & Jacket Fabrication

"Wellhead Modules BD" and "Wellhead Modules CD" Deck & Jacket Fabrication
Responsibility covers:
- Prepare Piping Simulation Model by Processing Data of PDMS Design Drawing, Piping Isometric AFC Status, Material Status and Fabrication Status to be integrated on ConstractSim Software.
- Check & Review of Piping Construction Model prior to designing.
- Prepare Piping Fabrication and Installation sequence based on structural construction schedule, piping material available, and erection sequence.
- Prepare Piping Hydrotesting sequence based on system, sub-system and fabrication schedule.
- Implement the Piping Fabrication sequence, Installation sequence, and Hydrotesting sequence prior construction.
- Prepare Piping Fabrication, installation and hydrotesting Work Packages according to Piping Fabrication Sequence, and Isometric AFC Status.
- Prepare Weekly Piping Simulation Progress Report of Engineering Status, Material Status, and Fabrication Status.
- Implement of Fabrication Work Package, Installation Work Package and Hydrotesting Work Package to Construction Engineer prior construction.

November 2004 to July 2007
PT. NIPPON STEEL BATAM Offshore Service (Batam, Indonesia)
Position: Piping/Mechanical Pre-Commissioning & Commissioning Engineer.

Project Undertaken:
TOTAL PECIKO 5 - Manifold Wellhead Platform Project,
Client/Owner: TOTAL E&P INDONESIE
"SWP-F" Deck & Jacket Fabrication

NORTH BELUT - Manifold Wellhead Platform Project,
Client/Owner: CONOCOPHILLIPS INDONESIA
"WHP-C" and "WHP-D" Deck & Jacket Fabrication

Responsibility covers:
- Provide hydrotest package, chemical cleaning packages, gross leak test packages and high pressure (N2+He) leak test packages including technical drawing (test block diagram and block detail) and technical document (check sheet, test sheet, NDT clearance, etc) as per project requirement.
- Prepare pre-commissioning document and vendor data prior piping/mechanical pre-commissioning and commissioning execution.
- Joint inspection of piping line check and mechanical completion with the client prior testing execution, and prepare piping punch list item if any.
- Supervise with other team of hydrotesting, chemical cleaning, gross leak testing, high pressure N2+He leak testing and passing valve testing execution.
- Provide pre-commissioning and commissioning data for dossier completion prior hand over to hook-up team.

Project Undertaken:
TOTAL SISI NUBI - Manifold Wellhead Platform Project,
Client/Owner: TOTAL INDONESIE
"MPWS", "MWPN" and "WPN-2" Deck & Jacket Fabrication
Responsibility covers:
- Provide hydrotest package, chemical cleaning packages, gross leak test packages and high pressure (N2+He) leak test packages including technical drawing (test block diagram and block detail) and technical document (check sheet, test sheet, NDT clearance, etc) as per project requirement.
- Prepare pre-commissioning document and vendor data prior piping/mechanical pre-commissioning and commissioning execution.
- Joint inspection of piping line check and mechanical completion with the client prior testing execution, and prepare piping punch list item if any.
- Supervise with other team of hydrotesting, chemical cleaning, gross leak testing, high pressure N2+He leak testing and passing valve testing execution. Supervise seal valve leak testing
- Review vendor drawing, procedures, FAT document and vendor dossier.
- Monitoring and supervise of mechanical equipment installation, E&I equipment installation and safety equipment installation. Monitoring flatness of crane adapter and make sure the flatness is acceptable according to specification.
- Monitoring mechanical preservation before and after installation prior to construction.
- Provide technical data and procedure prior mechanical inspection activity. Assist client inspection of mechanical equipments prior pre-commissioning and commissioning, and prepare mechanical punch list data if any.
- Prepare mechanical check sheet and test sheet prior pre-commissioning and commissioning execution. Provide pre-commissioning and commissioning data for dossier completion prior hand over to hook-up team.

Project Undertaken:
PREMIER OIL WEST LOBE – Wellhead Platform Project,
Client/Owner: Premier Oil Natuna Sea B. V
"WLWP" Deck & Jacket Fabrication
"AGX" Piping Modification Project
Responsibility covers:
- Prepare hydrotest procedure, gross leak test procedure and N2+He Leak Testing Procedure for client approval.
- Provide hydrotest package, chemical cleaning packages, gross leak test packages and high pressure (N2+He) leak test packages including technical drawing (test block diagram and block detail) and technical document (check sheet, test sheet, NDT clearance, etc) as per project requirement.
- Prepare pre-commissioning document and vendor data prior piping/mechanical pre-commissioning and commissioning execution.
- Joint inspection of piping line check and mechanical completion with the client prior testing execution, and prepare piping punch list item if any.
- Supervise with other team of hydrotesting, chemical cleaning, gross leak testing, high pressure N2+He leak testing and passing valve testing execution. Supervise seal valve leak testing.
- Hydraulic Oil Line Flushing Sub-Contractor Coordinator.
- Monitoring and supervise of mechanical equipment installation, E&I equipment installation and safety equipment installation. Monitoring flatness of crane adapter and make sure the flatness is acceptable according to specification.
- Monitoring mechanical preservation before and after installation prior to construction.
- Provide technical data and procedure prior mechanical inspection activity. Assist client inspection of mechanical equipments prior pre-commissioning and commissioning, and prepare mechanical punch list data if any.
- Prepare mechanical check sheet and test sheet prior pre-commissioning and commissioning execution. Provide pre-commissioning and commissioning data for dossier completion prior hand over to hook-up team.

Project Undertaken:
TOTAL YADANA – Wellhead Platform Project,
Client/Owner: TOTAL E&P MYANMAR
"WP3" Deck & Jacket Fabrication
"WP1" Piping Modification
Responsibility covers:
- Provide hydrotest package and gross leak test packages as per project requirement.
- Joint inspection of piping line check and mechanical completion with the client prior testing execution, and prepare piping punch list item if any.
- Supervise with sub-contractor of hydrotesting and gross leak testing activities.
- Hydraulic Oil Line Flushing Sub-Contractor Coordinator.
- Review safety equipment drawing and support drawings prior installation. Monitoring and supervise of safety sign and safety equipment installation according to specification.
- Assist client inspection of safety equipment and prepare mechanical punch list data if any.
- Provide and filled of safety equipment check sheet and test sheet prior pre-commissioning.

November 2002 to November 2004
PT. NIPPON STEEL BATAM Offshore Service (Batam, Indonesia)
Position: Piping Engineer.

Project Undertaken:
BP-APN – Wellhead Platform Project,
Client/Owner: PETROSEA
"APN-A", "APN-B" and "APN-D " Deck & Jacket Fabrication
Responsibility covers:
- Piping clashing check by PDMS prior AFC drawings.
- Review design drawing in plan, section and detail drawings. Review isometric shop drawing, pipe support shop drawing, detail drawings and cutting plan drawings.
- Prepare piping bill of material and summary of material list. Issue piping material requisition to procurement dept.
- Monitoring piping fabrication and piping erection activity. Site survey actual dimension for modification. Preparation ship lose material list.
- Review as-built drawing.

Project Undertaken:
BP-APN VALVE MODULE – Modification Platform Project,
Client/Owner: PETROSEA
"Module-1", "Module-2" and "Module-3" Piping Module Fabrication
"MMC" and "MMF" Piping Module Fabrication
Responsibility covers:
- Piping clashing check by PDMS prior AFC drawings.
- Review design drawing in plan, section and detail drawings. Review isometric shop drawing, pipe support shop drawing, detail drawings and cutting plan drawings.
- Prepare piping bill of material and summary of material list. Issue piping material requisition to procurement dept.
- Monitoring piping fabrication and piping erection activity. Site survey actual dimension for modification. Preparation ship lose material list.
- Review as-built drawing.

Project Undertaken:
SAKHALIN EPC PHASE-2 – Rotating Head Platform Project,
Client/Owner: NSC CORPORATION
"TLU" Deck & Jacket Fabrication
Responsibility covers:
- Review design drawing in plan, section and detail drawings. Review isometric shop drawing, pipe support shop drawing and detail drawings.
- Prepare piping and pipe support material cutting plan drawing prior to fabrication. Monitoring piping fabrication and piping erection activity. Site survey actual dimension for modification. Preparation ship lose material list.
- Review as-built drawing.

Project Undertaken:
BASSGAS YOLA-A – Wellhead Platform Project,
Client/Owner: CLOUGH OFFSHORE
"YOLA-A" Deck & Jacket Fabrication
Responsibility covers:
- Review design drawing in plan, section and detail drawings. Review isometric shop drawing, pipe support shop drawing and detail drawings.
- Prepare piping bill of material and summary of material list.
- Monitoring piping fabrication and piping erection activity. Site survey actual dimension for modification. Preparation ship lose material list.
- Review as-built drawing.

Project Undertaken:
EMTUNGA 78-Man Living Quarter Project,
Client/Owner: UNOCAL
"78-Man Living Quarter" Living Quarter Fabrication
Responsibility covers:
- Review design drawing in plan, section and detail drawings. Review isometric shop drawing, pipe support shop drawing and detail drawings.
- Prepare piping and pipe support materials cutting plan drawing prior fabrication.
- Monitoring piping fabrication and piping erection activity. Site survey actual dimension for modification.
- Prepare as-built drawing.

Project Undertaken:
LAKHSMI – Monopod Wellhead Platform Project,
Client/Owner: CHAIRN ENERGY
"LA" and "LB" Deck & Jacket fabrication
Responsibility covers:
- Review design drawing in plan, section and detail drawings. Review isometric shop drawing, pipe support shop drawing and detail drawings.
- Prepare piping and pipe support materials cutting plan drawing prior fabrication.
- Site survey actual dimension for modification. Preparation ship lose material list.
- Prepare as-built drawing.

April 2000 – November 2002
PT. NIPPON STEEL BATAM Offshore Service (Batam, Indonesia)
Position: Senior Piping Drafter / Designer

Project Undertaken:
CONOCO HANG TUAH – Modification Wellhead Platform Project,
Client/Owner: NISCONI
"Hang Tuah" Pipe Spool Fabrication
Responsibility covers:
- Review design drawing in plan, section and detail drawings.
- Prepare isometric shop drawings, pipe support shop drawings, hydrotest diagram and hydrotest/flushing block drawings. Prepare E&I cable tray, tubing tray and E&I equipment support drawings. Prepare piping and pipe support materials cutting plan drawing prior fabrication.
- Site survey actual dimension for modification.
- Prepare as-built drawing.

Project Undertaken:
CONOCO – Plem & Manifold Project Project,
Client/Owner: CONOCO
"MA1", "MD1", "MK1" and "ADGF" Plem & Manifold Fabrication
Responsibility covers:
- Review design drawing in plan, section and detail drawings.
- Prepare isometric shop drawings, pipe support shop drawings, hydrotest diagram and hydrotest/flushing block drawings. Prepare piping and pipe support materials cutting plan drawing prior fabrication. Site survey actual dimension for modification.
- Prepare as-built drawing.

Project Undertaken:
TOTAL PECIKO PHASE-2 – Wellhead Platform Project,
Client/Owner: TOTAL INDONESIE
"Peciko Phase 2" Deck & Jacket Fabrication

UNOCAL 76 – Wellhead Platform Project,
Client/Owner: CLOUGH UNITHAI ENGINEERING
"Unocal Phase 22/5", "Unocal Phase 22/6", "Unocal Phase 22/7" and "Unocal Phase 22/8" Deck & Jacket Fabrication

RAVVA Satellite Gas Development Project – Wellhead Platform Project,
ClientOwner: CLOUGH ENGINEERING Ltd.
"RAVVA" Deck & Jacket Fabrication

ONGC KRISNA GHODAVARY – Wellhead Platform Project,
Client/Owner: CLOUGH ENGINEERING Ltd.
"GS-15" and "GS-23" Deck & Jacket Fabrication

Responsibility covers:
- Review design drawing in plan, section and detail drawings.
- Prepare isometric shop drawings, pipe support shop drawings, hydrotest diagram and hydrotest/flushing block drawings. Prepare E&I cable tray, tubing tray and E&I equipment support drawings. Prepare pipe support materials cutting plan drawing prior fabrication. Site survey actual dimension for modification.
- Prepare as-built drawing.

July 1998 – April 2000
CV. TEGUH KARYA TEHNIK (Batam, Indonesia)
( Manpower Supply for PT. NIPPON STEEL BATAM )
Position: Drafter (Piping) – AutoCAD

Project Undertaken:
POGO TANTAWAN – Wellhead Platform Project,
Client/Owner: NISCONI
"Tantawan E" Deck & Jacket Fabrication

POGO BENCHAMAS – Wellhead Platform Project,
Client: NISCONI
"BWA", "BWB" and "BWC" Deck & Jacket Fabrication

Responsibility covers:
- Prepare & revise of piping isometric shop drawings and pipe support shop drawings.
- Site survey actual dimension for modification.
- Prepare as-built drawings.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 2451 to 2500 of 9906)Go to Search Parameters...
Brief Description
Over 10 years of experience in the field of Industrial Automation covering Conceptual Design, Detailed Design, Software coding and other Engineering services as applicable to Oil & Gas (onshore & offshore) projects and Utility projects.
34 Years of Inland and Offshore Inspection and Project Co-Odination
Fourteen years experience in E&P oil industry. Good knowledge in drilling and production engineering. Extensive experience in well engineering operations in Completion, clean-up, DST, Stimulation, Coil-tubing, Logging, Well survey etc. Good skill in planning, organizing, communicating, interpersonal
An experienced Offshore Procurement Lead
14+ years of experiance in Engineering,Design Engineering specialising in Instrumentation field.
Process Instrument & Control and Analytical Insrument Specialist
I have over 20 years experience in all aspects of electrical work i.e. construction, testing and inspection and commissioning at home and abroad, both onshore and offshore.
Thorough technical/commercial knowledge and long experience on design, fabrication and sale of process equipment for oil/gas and energy industries
Innovative and motivated Electrical and Electronics Engineer with 15 years lead experience in Commissioning, Operations of Combined Cycle Gas Power Plants and Thermal Power Plants and Maintenance of Combined Cycle Gas Power Plants and Thermal Power Plants Control & Instrumentation and Electrical S
I am a Certified PeopleSoft Technology Consultant and a Certified PeopleSoft Installer and have worked as a PeopleSoft Systems Administrator for 7 years. I have implemented/upgraded Student Admin, Portal, HRMS and Fin. PeopleSoft systems on various platforms and can implement on any platform.
INSTRUMENTATION & CONTROLS ENGINEER with proven leadership skills, vast experience in the petrochemical and oil & gas industry. Worked for Technip, Tractebel, PDIL, GS E&C in india and aboard.
working as intrument and control technician in Total oil and gas platform Abu dhabi . Involved mainly in Trouble shooting and commissioning activities.
Free! Wellsite - Operations Geologist: Over 25 years experience ( Canada/North Africa) ; Offshore / Onshore Operations; Exploration / Development Drilling; Directional / Horizonital Wells/Geosteering;Supervision of Personnel/ Contractors; OJT of Local nationals:
A competent and qualified Mechanical Engineer with over 20 years experience in functional areas of Project Management, Strategic Management, Mechanical Maintenance, Process Engineering, refurbishment, as well as other allied operations. Presently associated with Saudi Arabia Basic Industries Corpora
M.sc in Applied Geology with M. Tech In Petroleum Exploration and working with one of the most successful exploration company in India.
Thirteen years of experience in the field of project management, feasibility Studies, front end engineering, conceptual design, Project proposals, detail design, flexibility Analysis, procurement assistance in piping/pipeline design.
Process Engineer in Oil & Gas Consultancy.
Area of Interest AVO/AVA, Inversion, Reservoir characterisation using Pattern Recognition and Spectral Decomposition and Attenuation.
Completion and workover engineer (11.5 years experience)
Experience in field development plan, identification of workover requirements, well completion, acquisition of subsurface data, optimization of well performance and project management,
Contract Oil & Gas Technical Writer Twenty years of progressive responsibilities in oil and gas industry.
Mapping, exploration, aerial primary data acquisition.
Police Officer ,Hostage negotiator, Field training officer, Investigation officer,MS Office,Communication skills
Piping Designer with 8 years experience in Oil & Gas Engineering and Construction. Have knowledge about Working Specification, Procedure, and International Codes. And also understand about Structural, Instrumentation, NDE and Oil & Gas Process.
Can Handle any related Jobs such as Work Controller, Procurement Officer and Administration Assistant or Staff. More details mentioned on my Resume Body.
Management of geological work at rig, Detailed sample analysis including accurate porosity and permeability estimation; Petro physical QC; Geological Operational QC; Liaising with client Geologist, reporting and striplog submission, representing oil company at the Wellsite; Work in the W
9 years of experience in Corrosion Engineering Activities for Oil and Gas Producing Company.
I am hardworking, trustworthy and responsible. I can work under pressure with minimum supervision. I like to take challenges which has a growing and rewarding concepts; love to share and learn new ideas in my working environment.
I am an MBA student at College of Business School at Auburn University. I hold chemical engineering degree from India¡¦s Top Engineering School. I have strong reasoning and analytical skills. I have 3 years experience in Corporate Marketing with British Petroleum.
B.Sc (physics-instrumentation), ACAD and Microstation expert, Designing 12 years experience
I have endeavor to have broad base safety experience.
Responsible for managing the Project Electronic Document Management System (EDMS) which processes and stores all technical documentation including selected contractual and other correspondence.
Extensive working experience as piping engineer and piping/mechanical pre-commissioning & commissioning engineer.
Experience in Machinery Design and Manufacturing Management. Seven years experience in Sheet fed Offset Printing Machinery Design. Masters degree in Mechanical Engineering and Management
Experienced Consultant Wellsite Geologist with 10 years of International Experience
Experienced Electronics and Communication Engineer for 13 years, performing electronics and communication task which includes bench troubleshooting, repair, maintenance, installation and commissioning. Performing Assistant Supervisory task.
I have over 13 years in oil field and work in logistics for most of that 13 years.
project leader or senior engineer in oil , gas and petrochemical industries for projects and commissioning with middle ease, european and indian exposure for more than 13 years in production, operation, precommissioning and commissioning with smooth run and trouble shooting and DCS controls.
Graduate, PGDCA., Shorthand, typing, 16 yeas experience, 6 six in Middle East, Excellent Finance. administration, conract background
xsteel detailer/checker
I am NACE International’s CIP Level 3 (Peer Review) Certified Coating Inspector having over 13 years of experiences in QA/QC Inspection of Corrosion Prevention Activities & Insulation Inspection for Oil & Gas Projects.
Over 24 years of extensive experience in progressively responsible positions in the Construction Industry. I speak Russian.
Throughout my 10+ years of technical experience as a Instrumentation and Control Systems Engineer, I have acquired a strong knowledge. I am currently working for Aker Kvaerner in Canada, leading a group of engineers to design 1.443 MMSCFS gas plant located in Iran
Work experience in the Oil Industry in production, operations and good reservoir skills. Good computing skills, interpersonal relations, ability to work in a team environment.
BE (Electrical) from VJTI – Bombay with rich experience in Contracts & Procurement, MM logistics, EPC Project Management, Sales tender, Profit & Cost centre Operations in career spanning 25 years in India and Overseas for Oil and Gas Process, Petro Chemical, Metal, Power, Civil MEI Infrastructure BU
Contribution Twenty Two Years comprehensive professional experience encompassing the succeeding different area of responsibility.
More than 18 years experience in DCS Engineering, Instrumentation Detail Engineering, Construction, Maintenance and Troubleshooting in Refineries, Petrochemicals & Project Management. Have worked overseas in Project Engineering arena in Canada, Kuwait, Singapore and India.
Instrument & control Engineer
15 years sound experience in almost all field of Instrumentation including, Project. construction, commissioning, planning, maintenance, Major modification, Revamping etc.
Mechanical Engineer with 13 years of experience in pipeline design, estimating, commissioning and construction management in Oil and Gas industry.
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   [ 50 ]   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com