Resume - Petroleum Engineer with almost 6 years Experience

Misco Jobs

Resume #68966

CONTACT INFORMATION:
View contact information...

* Profile Male, 29, Married (1 Daughter)
* Nationality: Saudi Arabia
* Current Location: Saudi Arabia

* Current position: Stimulation Engineer
(Reporting to: CEO)

* Preferred Locations: Anywhere around the world

WORK EXPERIENCE
________________________________________
Jul 2002 - Jun 2007 Saudi Aramco Daharan, Saudi Arabia
Production Eng. 3
Oil production engineering job. My job is to maintain each well production rate as required. Mainly, I'm designing and witnessing Production Logging Programs, Scale Inhibitor Squeeze, Descaling, Acid Jobs, Workover programs and ESP designing. Also, I'm very familiar with well data sheets.
As a part of my development plan, I was assigned to witness 58 acid jobs (part of increasing South Ghawar productivity to maintain the high oil demand).
Also, I work as a field operator as a part of my development plan. During this assignment, I did Temperature, Pressure, Annuli and Greasing Surveys. I also did some Productivity Index surveys. Stripping out wells and tie them back was also part of this assignment.
Finally, I have been assigned to Plant Engineering Division where I design some engineering packages for the plant I have been working in.

Jul 2007 - Present JACAM Specialty Chemicals Dammam, Saudi Arabia
Stimulation Eng.
I joined JACAM Specialty Chemicals (under constructing company) as a stimulation engineer. Because the company is under constructed, I've been involved in the company civil constructing jobs. Also, I have been involved in the main factory assembling. The main objective of this company is producing stimulating chemicals fluids.
Frequently, I witness offshore stimulation jobs for my company products and I'm reporting directly to the CEO of the company.

SEEKING FOR
________________________________________
* Oil/Gas Engineering.
* Oil/Gas Field jobs such as Logging, pumping, completion, Stimulation, ESP installation, Production forecasting.

EDUCATION
________________________________________
Sep 1997 - May 2002 KFUPM Daharan, Saudi Arabia
Petroleum, Bachelor(BSc/BA), GPA 2.89

OTHER CERTIFICATES
________________________________________
2006 FORMATION DAMAGE: CAUSES, PREVENTION, RESERVOIR Petroskill, Saudi Arabia

2003 WELL COMPLETION & WORKOVER Petroskill, Saudi Arabia

2006 BASIC LIFE SUPPORT Saudi Aramco, Saudi Arabia

(In addition, I took so many technical courses during my serving at Saudi Aramco).

IT Skills
________________________________________
Windows & Office tools
* Word, Exel, and Power Point Advance

LANGUAGES
________________________________________
* Arabic Native

* English Fluent

GOOLS TO ACHIVE IN MY CAREER
________________________________________
1) Work hardly to keep on the good image that the company has global wise and to make it better.
2) Do my assigned jobs in the safest, simplest, efficient, and lowest charged way.
3) Full loyalty to my company.
4) Keep on mind that every job, document, task, meeting, and management decision as a company confidential thing and I don't have any right to reveal it.
5) Use company properties under the company policies.
6) When I have a problem during my job, I try to fully understand it before I take any decision. If I don't believe that I can solve it, I will contact my direct supervisor to take the decision.

COMMENTS
________________________________________
1) I'm willing to work at any GCC, Australia or UK.
2) I attend more than 90 CT jobs during the last four years. Also, I attended bullheading jobs.
3) When I was at ARAMCO, I used to handle HWTAH field which is producing Arabian Supper Light Oil.
3) I've been in so many management curses such as Seven Habits For Highly Effective People, Business Presentation Preparations, Interpersonal Communication, Self Development, What Matters Most, and Personal Mastery and so many courses at ARAMCO.
4) I attended so many production logging jobs.
5) I was involved in designing ESPs.
7) I'm very familiar with production data programs such as Oracle and EPP.
6) Currently, I'm covering off-shore stimulation jobs.
7) I'm applying for new job opportunity at famous companies.

________________________________________

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3601 to 3650 of 9797)

Go to Search Parameters...

Brief Description

Electrical Design, Feasibility Study, Safety Audit, Procurement, Installation, Punchlisting, Commissioning / Start-up & Maintenance Experience in Oil & Gas (Petroleum Refinery) Industry - Project & Maintenance Departments

Rotating equipment Engineer, 12 years of experience in petrochemicals plant(Polypropylene plant experience spheripol & novolen technology)

Do all activities of SHE for all units running at the refinery such as safety committee, HAZOP studies, EIA, Inspections, Audating, work permits

Analysis Estimation-Officer 10 years as operations engineer in power plant

HSE, H2S, Fire fighting, Fire protection, Inspection, Rig or Plant, Off or on Shore

Electrical Engineer, Transformer especiallist, excellent project management, supervised High Voltage test field project C$ 20 M, excellent computer skills including networks administration

Master Qualified Instrument Engineer with 10 years experience of detailed design engineer

Working as Mechanical Maintenance Supervisor.

Masters Degree in Metallurgical Egg with Specilisation in Welding Egg. Prepare, Review & Approve Welding Procedures as per various Codes / Standards. API 510 Pressure Vessel Inspector.· Trouble shooting of welding and related issues.

Inst. Engineer with 13 years Inst. Design experience in the field of Oil. Petrochemical Refineries. Attended FAT/ SAT, Hazop etc.

Highly effective Program Manager with 15 years experience successfully implementing multi-million $ capital investment projects with GE / Toshiba for industrial customers worldwide. PMP 2006, MBA 2003 plus Engineering degree. Holds P&L responsibility for $25 million of global turnkey projects.

Operation Drilling Engineer - Drilling Superintendent - Drilling/Completion/Work Over Supervisor

PDS, CADWorx, Rebis AutoPlant

HSE Officer

24 years exp. oil and gas manufacturing, machining, repairing, rebuilding of all components of drilling and service rigs. Also gas plant experience. Have a red seal machinist ticket acquired with a grade 12 education at the northern institute of technology, Edmonton Alberta Canada.

A senior Process Analyzer Specialist with twenty – five years of experience in the Petro Chemical Industry. Strengths include: design work, upgrades, start–up assistance, works to meet tight deadlines and budgets; pays close attention to detail.

Fully experienced in all aspects of maintenance of oil and gas production facilities, hands on experience of major overhauls of rotating equipment which includes operation of GE frame 5 Gas turbines.Responsible for supervision of all disciplines to ensure safe and efficient maintenance proceedures.

Responsible for the maintenance of the warehouse, receiving,issuing,stock ordering,materials transfer, inventory of stock. Prepares monthly warehouse report. Grading suppliers and communicate with suppliers on a highly technical level. Perform other duties as assigned.

I hold a Bachelors Degreein Petroleum Engineering. I also have a 2 year hands on Rig experience with Transocean and 4 year LWD Engineering with Major companies.

all kind of marine operation on Derrick & P\L Barges, responsible for operating 8-10 winches on a same time, communicate with tower operators to control all incoming & out going boats & barges, co-operate with surveyor on board to draw the anchor pattern for safe anchoring operation

With my extensive year of experienced in the construction field as a Project Turnover/ Completion Technical Document Controller; Responsible in maintain, updating and monitor Database such as (WINPCS) as well as Windows Access, (I-DMS) (Integrated Document Management System, (ECOSMOS) Corres

I graduated from the University of Oklahoma, USA (Msc Petroleum Engineering), I have been working for the Algerian oil company SONATRACH as a Reservoir Engineer since Feb 2005. I can assure you that I am reliable and hardworking, ambitious and highly motivated individual

15 years in the Canadian Oil and Gas Industry, I have a well rounded understanding and knowledge of the industry. I have worked as a mud engineer providing technical service to the Western Canadian Foot Hills region. Have a great understanding of oil base fluids, water based and advanced Gel/Chem

Junior Well SIte Geologist, Junior Pore Pressure Engineer

Assistant Material Control Supervisor

Energy Commerce degree / PLM Degree

chemical engineer with 6 years experience on oil and gas production platform in Persian Gulf, commissioning and start up alongside with SHELL company

1. Project Management. 2. Contract & Proposal Arrangement.

Automation engineer

Experienced, skilled, self-motivated, petroleum geologist with strong 2-D/3-D seismic interpretation and prospect generation background in South Louisiana and South Texas. Team player with strong workstation skills and ability to provide quality interpretations. Seeks a position to work on diverse

Petroleum Engineer with almost 6 years Experience

Senior Chemical Engineer - professional with more than 20 years work experience in Oil refineries-execution, running and shutdowns, Industrial projects, Construction, Manufacturing, Water treatment plants, Projects management, QC/QA Management, Internal auditing and latterly specialist Educator

with computer proficiency in SESAM, ABAQUS, PATRAN, FLEXCOM, ASAS, SACS, FEMGV, STAAD Pro, AutoCAD, and MathCAD

Extensive diverse EPC Management, Operations, Consulting - domestic & world=wide, all disciplines Refinery, Petrochem, Chemical and Pharm. projects, operations and plant trouble shooting with associates power and infrastructure.

Managing multidisciplinary Sub Surface Team in respect of strategic planning, coordination and monitoring of sub surface activities

Expertise in analysis of Chemicals, petrochemicals, petroleum products using instruments like ICP-OES, GC, HPLC, AAS, FTIR, CS Analyzer etc. Having expertise in SPC / SQC techniques, LIMS and SAP QM module. Research in Petrochemical and petroleum products. Worked for Chevron Oronite lube additive co

Planning, Scheduling, MIS generartion, progress measurement, cost control

Project Engineer / Manager

Exploration geologist in oil company. Structural geologist

Having more than 12 yrs experience in safety field. Ready to accept any new challange. could able to work any pressure environment.

I am Mechanical/Pipeline Engineer working in the Oil and Gas Industry for more than a decade now.

Looking for Mud logging Geologist Position

Certified Industrial Hygienist (CIH) and Environmental Health & Safety (EHS) Professional who can manage and solve EHS concerns. 20 years experience in Occupational H&S compliance in energy, industry, mining, refinery, government, private and manufacturing. Public speaking, training, manager

Quality Assurance, Quality Control, Construction, Project, ISO 9001, System Development, Implement, Audit, Corrective & preventive actions, Continuous improvement, Oil & Gas, power & petrochemical industries

A Chemical Engineering graduate with outstanding professional experience of 33 years in the Operation, Project implementation, Process engineering Jobs and HSE management, in medium to large sized Petrochemical/Fertilizers (Ammonia) / Chemical plants/Offsite storages and terminal complex.

Area of expertise is ranging from Preliminary and Details Design, Construction

Design Engineer (Piping & Stress Analysis), Mechanical Engineering

9 years in Pipeline Engineering, Project Management/Engineering Co-ordination for Conceptual, Bid & detailed design / engineering, & construction, Analysis and Design of RCC & STEEL Structures.

Act as Loading Master during Pre-Loading Meeting

• Field Instrumentation Eng,PLC ,DCS RS3 rosemount oil and gas 7years

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 [ 73 ] 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out