Resume - I would like to apply for a position of Rotating Engineer.

Misco Jobs

Resume #69545

CONTACT INFORMATION:
View contact information...

I would like to apply for a position of Rotating Engineer. I have been working in a company for more than 20 years in maintaining heavy industrial Rotating Equipment such as gas turbines, compressor, and pumps. I also attended several courses related to rotating machinery.

Herewith I enclose my curriculum vitae in more detail. Please let me now if you have any question or concerns with respect to my Curriculum Vitae.

Date of Birth: 10 November 1966
Sex: Male
Citizenship: Indonesia
Marital Status: Married

Education:
Primary School (SD): Negeri, Jangka Peusangan,
Secondary School (SMP): Mat Glp Dua,
High school (SMA): Negeri, Mat Glp Dua.
University: Mechanical Engineering Department,
Unimal University, Lhokseumawe,

Employment History:

1. 1986 to 1987 as a Firemen at CV. Muara Karya service for Malikussaleh Air Port. Lhokseumawe. Aceh Indonesia.

2. 1987 to 1988: Pre employment training program at PT. Arun. Ngl (Joint Venture Exxon Mobil & Pertamina Indonesia).

3. 1988 to 1996 as a Rotating Technician for field Area Maintenance
LNG. Plant at PT.Arun. Ngl (joint venture Exxon Mobil & Pertamina Indonesia).

Involve in daily maintenance activities such as:
„« Involved in overhauls of MS-5001 and MS-5002 General Electric gas turbine, compressor centrifugal, Reciprocating (Ebara, Mitsui, Nouvo Pignone, Demag, and Kawasaki) and centrifugal pumps, hydraulic pump available at LNG Plant.
„« Participated in preventive maintenance program for all rotating Equipment Machineries (21 each MS-5002 mechanical drive as turbine Mfg.General Electric, 11 each MS-5001 power generation gas turbines Mfg. Hitachi, process compressor (Mfg. Elliot/Ebara Compressor, Nouvo Pignone Compressor, Joy Compressor, Man Turbo Compressor, Mitsui Compressor, and more than 700 pumps).
„« Troubleshooting overhauls and material preparation for compressor, pump, turbine (21 each MS-5002 mechanical drive as turbine Mfg.General Electric, 11 each MS-5001 power generation gas turbines Mfg. Hitachi), and others mechanical equipment machineries or their components to be repaired at mechanical shop.
„« Check the possible root causes of the unhealthy equipment or damaged component and review the equipment repair histories prior to perform any corrective actions.

4. 1996 to 2000: as a Assistance Supervisor for Rotating Equipment shop at PT.Arun.Ngl. (joint venture Exxon Mobil & Pertamina Indonesia)

To plan, organize and supervise Millwright in performing all types maintenance of rotating equipment in Plant facilities, in order to support continous LNG & Utilities production, to achieve maintaining high availability and reliability of equipment and compliant to company policy, engineering and SHE standard.

„« Organize and coordinate a subordinate in performing diagnosis, trouble shooting, and corrective action, on all types of rotating and mechanical equipment in plant area, to ensure all jobs are carried out safely, smoothly, within schedule and compliant with standard maintenance procedure and LPPG and company policy
„« Reviewed the equipment drawing and its repair procedures and perform some measurement drawing or indicate if there is a requirement to fabricate the new parts.
„« Contacted the engineering group to review the acceptance of repair quality and discuss the possibility to perform any improvements related to equipment design or maintenance procedures.
„« Provided the standard procedure and accurate machinery maintenance procedure in order that machinery technicians be able to perform works safely and efficiently and create process unique and PM work order, prepare schedule daily/weekly and monthly plans base on RBWS (Risk Base Work Selection) meeting result to unsure all jobs are carried out and completed on schedule and according to priorities.
„« Provided the material for equipment repairing and identify the equipements problems and review the equipment repair histories prior to perform any corrective actions.
„« Advised a subordinate to fix the problems for equipments repair and support continuous improvement program and create positive working climate.
„« Plan and organize the implementation of preventive and predictive maintenance program of all rotating equipments to ensure that program is properly carried out, on schedule, based on equipment strategy and reliability standard and approved budget.
„« Evaluate and recommend the replacement of major rotating equipment material/spare parts (including the specifications) required based on findings, to ensure the materials/ parts meet specification and properly used.
„« Review and provide comment for revision on engineering design from maintainability perspective to ensure the installation or construction maintainable and operable.
„« Develop millwright maintenance procedures in order that technicians be able to perform works safely, properly and efficiently.

5. January 2000 to the present as a Rotating Engineer at PT.Arun.Ngl. (joint venture Exxon Mobil & Pertamina Indonesia).
Familiar with Gas Turbine Model MS-5002 mechanical drive as turbine Mfg.General Electric and MS-5001 power generation gas turbines Mfg. Hitachi, Vertical & Horizontal Split type of Centrifugal Compressors, Vertical & Horizontal type of Centrifugal Pumps, Dry Gas Seal (John Crane MFG), Mechanical Contact/Bushing Seal, Seal Oil/Lube Oil System, Gear Box, Cryogenic Pumps.

Responsibilities:
„« Managed the selected project during all phases of the project from project design and execution, turn over, commissioning, start-up through to operation of the facilities to ensure the project meet design requirement and approved budget and complete in timely manner.
„« Performed the detail rotating equipment engineering design and selection of new project and/or modifications including equipment and material selection/substitution to ensure the equipment specification follow new technology and recognized code/standards.
„« Provided the technical assistance guidance and recommendation related to rotating equipment engineering, the equipment performance and optimization to ensure all rotating equipment design construction and operation are accordance with applicable code, standards government regulation.
„« Conducted the performance test of rotating equipment for equipment troubleshooting, optimization and issue technical recommendation to improve the equipment performance.
„« Performed the rotating equipment trouble shooting and failure analysis in maintaining plant equipment operability, reliability and develop action plant to prevent recurrence problem.
„« Develop the recommendation operating and maintenance guideline of rotating equipment to ensure the equipment is operated and maintenance properly following technical specification and standards.
„« Analyzed the historical record, such as vibration trends, lube oil analysis, ans inspection report of all rotating equipment, document update the data into IT system and prepare technical recommendation to improve the equipment performance and provide engineering and other skill/expertise to support and involve in company corporate programs.
„« QA/QC Engineer during plant turn around, scheduled and unscheduled shut down, and for new project.
„« Handled the projects assigned through Engineering Work Requests.
„« Review a minimum and maximum stock spare part for maintenance ware stock.
„« QA/QC Engineer for machinery equipment component repairs, spare part refurbished. And communications with OEM and others.
„« Reviewed and recommend field actions based on preventive maintenance program.
„« Involved in SIRCO Team (Serious Incident Review Committee Team).

7. Formal Training:
„« March 1986, Airport Rescue-Fire service, (Loss Prevention Department PT.Arun.NGL.CO Lhokseumawe, Indonesia).
„« November 1986, First Aid Course. (Loss Prevention Department PT.Arun.NGL.CO Lhokseumawe, Indonesia.
„« January 1987- July 1988, Pre Employment Training Program, PT.Arun.NGL.CO Lhokseumawe, Indonesia.
„« Maret 1988 - Juni 1988, Crane Operator and Rigging Training, LPPK Alkon Surabaya.
„« January 1991, Crane Inspection and Test training, Government Worker Department East Java, Indonesia...
„« February 1993, General Modules for Rotating Equipment Machineries Training, PT.Arun NGL.Co, Lhokseumawe, Indonesia.
„« July 1993, Centrifugal Pump Operation and Maintenance Training, PT.Patria Utama, Jakarta, Indonesia.
„« January 1994, Sundyne Pumps Training, PT.Arun.NGL.Co., Lhokseumawe, Indonesia.
„« July 1994, Mitsui Compressor, PT.Arun.NGL.Co., Lhokseumawe, Indonesia.
„« September 1994, Sealing Sealing system For Compressor and Centrifugal Pumps, PT.Arun.NGl., Banda Aceh, Indonesia.
„« January 1994, On the job Training at T&ES Dept./ Plant Reability Engineering with Special Assignment ¡* Centrifugal Performance Evaluation¡¨ on site PT.Arun Ngl.Co.
„« February 1995, Introduction to Database, PT.Arun.NGL.Co., Lhokseumawe.
„« July 1995, Centrifugal Compressor Operation and Maintenance, PT.Arun.NGL.Co., Lhokseumawe, Indonesia.
„« June 1996, Balancing and Total Alignment, PT.Patria Utama, Surabaya, Indonesia.
„« September 1997, Modular Fitting and Pipe Standart, PT.Arun NGL.Co., Lhokseumawe, Indonesia.
„« September 1997, Modular Tube, Fitting and Hose, PT.Arun NGL.Co.,Lhokseumawe, Indonesia.
„« January, 1997 Appreciation in recognition contribution and service as PT.Arun.Ngl Emergency Response Team member in 1996.
„« October 1998, Vibration Monitoring & Analysis, at The Oil and Gas Manpower Development Centre Cepu Indonesia.
„« February 2001 LNG & LPG systems courses. PT.Arun. NGL.
„« January, 2003, Appreciation in recognition contribution and service as PT.Arun.Ngl. Emergency Response Team member in 2002.
„« October 2003 Basic Gas Turbine Operation and Maintenance training by General Electric. Nuovo. Pignone, Florence Italy.
„« November 2003 Basic Centrifugal Compressor Operation and Maintenance Training by General Electric. Nuovo Pignone, Florence Italy.
„« September 2006, Turbomachinery Monitoring and Problem Analysis Training by John M. Campbell & Co.
„« Desember, 2007 Appreciation in recognition contribution and service as PT.Arun.Ngl Emergency Response Team member in 2007.

8. Seminars/Symposiums/QA-QC Work Outside:
„« QA/QC Engineer for Gas Turbine Combustion Part Repair (General Electric Shop, Bandung, Indonesia 2002)
„« Gasex 2002 Conference May 2002 (Brunei Darussalam)
„« QA/QC Engineer for Gas Turbine Combustion Part Repair (General Electric Shop, Bandung, Indonesia 2003.
„« ASME Gas Turbine Users Symposium November 2004 (Orlando, Florida USA).
„« Involved 1st stage Bucket Gas Turbine material Assessment Southwest Research Institute December 2004 (San Antonio, Texas USA.)
„« QA/QC Engineer for Gas Turbine Combustion Part Repair (General Electric Shop, Bandung, Indonesia 2005.
„« QA/QC Engineer for Gas Turbine MS-5002 Bucket Coating (General Electric Shop (GE Keppel ) Singapore 2005.

------------oooooo-----------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 251 to 300 of 9855)

Go to Search Parameters...

Brief Description

I have been working at Chevron Agbami FPSO project as an electrical engineer during the detail design at DSME (Daewoo Shipbuilding and Marine Engineering Co., Ltd) and as a commissioning electrical engineer during the offshore campaign for Chevron International Exploration and Production Co. Ltd fr

I would like to apply for a position of Rotating Engineer.

I have been in HSE field for more than 20 years. My experience includes in India and different GCC countries.

Experienced Project/Production Oil and Gas Engineer

Senior Geologist with 24 years experience. (Available for contract work, location: Anywhere in the world)

10+years experience as owner/manager/consultant (Philippines) and 9+ years as Asst. Proj. Mgr/Projects Civil Engineer/Municipal Engineer (United Arab Emirates & Oman)

Highly experienced in dealing with Engineering, Project and Procurement coordination for Static equipments and Packages. Experienced in EPC,PMC,FEED and Study type of jobs and well versed with renowned Codes and Owner Company Standards. For further details, please refer my CV attached.

Principal Instrumentation Engineer - Over 26 years experience in instrumentation/electrical engineering and design in the petrochemical, wastewater treatment, seawater treatment and nuclear industries.

Procurement

I am a Degreed Petroleum Engineer with over 25 years of varied worldwide experience in the industry. My expertise is well work, projects, engineering, supervision and education. I currently consult for International Drilling Projects.

An experienced Manager with muti-skill in Quality Assurance, Quality Control, NDT, Offshore experience, Oil and Gas sector, Rig building projects, internal/external/regulatory audits, Interpretation of International codes and standards .

PhD in Geophysics, excellant in computer ,

General Management (1300 staff), Sales devt, finance - International experience - Oil & gas, Distribution, civil eng.

Status Qualifications and employment history Education Foreign Languages

Nineteen (19) years of total experience in various fields of engineering works involving Oil & Gas (onshore/ offshore), Petrochemicals and Power Plant industry projects, specifically in the Saudi Arabian Oil Companies, which involves infrastructure projects like Dam, Tunnels, Roads & Bridges, high r

Nearly 20 experiences as Enterprise level CAD/CAM/CAE software consultant.

20 years experience in over 20 countries. Drilling Supervisor working in Australasia, West Africa and Asia, Land and offshore. Project involvement from JV approval, rig commissioning to completions and abandonment.

PROJECT, INSTALLATION, COMMISSIONING, MAINTENANCE OF INSTRUMENTATION AND CONTROL SYSTEM

Drilling Fluids Program Supervisor/Well Site Supervisor

Over 21 years of management and hands on experience in a field of Procurement, Fabrication, Installation, Commissioning start up, Operation and maintenance activities. Related to Oil & Gas marine, On & offshore structure, Ship repair and EPC fabrication work, Petrochemical, Utility plant.

Working in Oman as a Instrument Engineer, I have 20 years exp in Instrumentaion and Analytical

Over 22 years of experience in the Oil and Gas Industry including 19 years of extensive and varied international senior management positions with Schlumberger Oilfield Services, a global multinational service provider. Professional strengths include: Organizational and personnel performance manage

After Post graduation (M.Sc) from university, I joined SHELL international Petroleum company in 1990 in operations management cadre. I was confirmed in service after a one year probation training period. I have continued to work with this major international oil company until the present time, gain

Utilize extensive experience as a mudlogger and an LWD/MWD operator as a well site geologist

Master mariner class 1 unltd, over 8 years command experince onboard large crude carriers. Over 40 spm mooring ops at various terminals including Lybia. Willing to gain expertise as mooring master in offshore oil industry.

Senior Chemist Supervising the sampling/testing Petroleum Refinery product streams and finished products and issuing Certificates of quality (COQ) for the products

Total exp into oil and gas field: 15 years.

IAM A QUALIFIED CORROSION ENGINEER AND IHAVE BEEN WORKING WITH WAHA OIL COMPANY SINCE JANUARY 1984, THEN WITH GECOL COMPANYTILL DATE,LAST TWO POSISION HELD , I- CORROSION SECTION SUPERVISOR (GIALO FIELD) 2- COORDINATOR OF HIGH COMMITTEE IN PROJECT DEPARTMENT.

PMC Electrical Engr - O & G

Working in QA Deptt of M/s Nuclear Power at Mumbai, for last 16 years. Responsible for Quality of manufacturing and construction phases, EPC contracts, supplier evaluations and QA at supplier end. NDT expertise, ISO, management assessments etc. Maintaining QMS, NC disposal and improvements,

Skilled and proven HSE Manager with over 20 years international experience specializing in overcoming cultural barriers to achieving safety improvement.

I have high experience as production supervision at manufacture plants.

Drilling Fluids Engineer, Experience with All types. Over 30 years in field. World wide experience, Presently working Ultra-Deepwater projects in GOM.

Having 18 years of work experience in Project Management / Constrcution / Fabrication

Qualified Hse Manager Wit Experience In Management Of Hse Aspects In Oil & Gas, Lng, Pipelines, Power Plants, Stp/Water Treatment Plante And Infrastructure. Worked In Most Of Critcal Oil / Gas Felds Like OMAN LNG, PDO (Oman); ADNOC, ADCO, ADGAS, ADMA-OPCO (Abu Dhabi). With Ph.D.In Management Of HSE

As Specialist Professional Engineer (Training Engineer)/Mechanical Training Instructor supervisor grade C1, C2 in all aspects of Training and Development (coach and prepare learning materials, capacity and profile building, skill-transfer and counterpart training).

Prodigiously experienced and qualified Engineering Professional, with an enviable, global, 30-year background in the Oil & Gas Production and Processing (On-Shore and Off-Shore), Refining, Petrochemicals, Chemicals, Compression and Gas Turbines industries.

Highly experienced and successful management professional with a demonstrable record of accomplishment; currently seeking a challenging role, within a multi national environment. Offer a range of transferable skills within the areas of strategic management, business process re-engineering, etc

Foreign Exploration Country Manager, Oil Exploraton

Expose in oil and gas industry locally and internationally.

19 Years as “Instrumentation & Controls Engineer- PMT/ EPC Roles in Oil& Gas, Petrochemicals”.

Reservoir engineer / software engineer. 11 years reservoir engineering; 8 years software engineering in other industries. Keywords: reservoir modeling; simulation; upscaling; production forecasting; reserves estimation; well test analysis; Eclipse; VIP. Availability: immediate.

More than nineteen (19) years professional experience executing multi-million dollar projects in both domestic and international locations, acting as Owner representative in project controls and business management on major EPC, Lump Sum Turnkey and Joint Venture projects supporting Oil projects

Senior Civil/Structural in Oil/Gas Field

Over twenty (20) years of extensive contractual, commercial, estimating, project controls experience including several years involved with multi million dollar value contracts in the oil and gas (onshore and offshore) engineering and construction industry.

Well completions & workovers. Sand control, stimulation. Domestic & international. Onshore & offshore.

I am a senior electrical engineer and project engineer with over 30 years experience largely gained within the Petro-Chemical, Liquid Natural Gas (LNG) and Power industries. Experienced in UK and overseas operations both on and offshore, Start-up, resident and project based engineering roles. A good

pipeline inspection and tyhird party inspection

Instrumentation supervisor, Instrument engineer, Instrumentation analyst, Instrumentation superintendent

Petroleum geology engineer graduated from Algeria in 1974 , worked for The Sonatrach - Exploration division until 1982 working fro water well drilling in Jordan and still , supervise all drilling , geological and tendering activities, speaking English, French & Arabic languages.

First 1 2 3 4 5 [ 6 ] 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out