Resume - I have M.Sc. in Mechanical Engineering and as a Piping Engineer I have 7 years e...

Misco Jobs

Resume #70142

CONTACT INFORMATION:
View contact information...

------------------------------------------------------------------------------------------
Summary of Experience
As a Mechanical Engineer having M.Sc. degree, I have been involved in piping engineering discipline for 7 years. My experience covers both engineering and construction jobs in petrochemical and oil, gas refinery plants. During these years the work frame is mainly established with:
-Robust background of mechanical engineering knowledge.
-Piping design in basic, FEED and detail engineering phases.
-3D Piping modeling. PDS expert & some experience with PDMS.
-Piping stress analysis experience.
-Piping materials selection experience.
-Piping construction supervision coordination, from workshop and field erection until commissioning of plant.
-International job exposure.
Above all, my entire professional career is built on pragmatic creativity and hard working attitude.
------------------------------------------------------------------------------------------
Education
-B.Sc., Mechanical Engineering – Solid Mechanics.
K.N.Toosi University of Technology- Iran, 1991–1996.
Project: "Study and Design of Cranes." Design and calculation of conveyors and bridge cranes.
GPA 15.7
-M.Sc., Mechanical Engineering – Solid Mechanics.
Amirkabir University of Technology (Tehran Polytechnic)- Iran, 1997–2000.
Thesis:"Finite Element Analysis of Cracked Plates Repaired with Bonded Patches." The research was in the field of Fracture Mechanics and Finite Element Method. Increase of cracked element lifetime via development Of the Repairing Technique was studied and results were published in proceedings of international conferences.
Graduate courses: Finite Element Method, Mathematical Theory of Elasticity, Theory of Plate and Shell, Fracture Mechanics, Theory of Plasticity.
I was teaching assistant in Static course as a post graduate student.
GPA 16.2
------------------------------------------------------------------------------------------
Experience in Engineering Office
Company: NARGAN ENGINEERS & CONSTRUCTORS-Iran,05.2001-Pres.
1-Project: GAS REFINERY PLANT, OFFSITE FACILITIES. Masjedsoleiman-Iran, 06.2001-11.2001.
Position: Piping Engineer, Worked in piping task force discipline.
2-Project: C2+ RECOVERY AND FRACTIONATION PLANT. Assaluyeh-Iran, 11.2001-10.2002.
Position: Piping Engineer, Involved in overseas mission at LINDE AG (Germany-Munich) to work in the basic and detail plant design. I was in charge of engineering and design of Pipe Racks.
3-Project: CRACKING PLANT- 10th OLEFIN COMPLEX. Assaluyeh-Iran, 04.2003-12.2003.
Position: Piping Engineer, Involved in basic and detail design of the project led by TECHNIP. I was in charge of engineering and design of piping systems in cold section.
4-Project: LDPE PLANT- 9th OLEFIN COMPLEX. Assaluyeh-Iran, 12.2003-01.2004. Position: Piping Engineer, Worked in the basic and detail design of LDPE plant led by TECHNIP. I was in charge of engineering and design of Extruder area.
Major Activities:
-Equipment and piping layout design.
-Plot plan, Key plan generation and development.
-Piping study and routing.
-PDS, PDMS modeling.
-Piping 3D design review.
-P&ID and line list remarking.
-Pipe support selection and design.
-Piping flexibility study and stress analysis engineering including manual calculations.
-Civil, structure drawing review complying with piping design.
-Vendor corresponding, comment and incorporating.
-Isometric checking.
-MTO checking.
-Piping plan drawing generation.
------------------------------------------------------------------------------------------
Experience in Construction Field
Company: NARGAN ENGINEERS & CONSTRUCTORS
1-Project: CRACKING PLANT- 10th OLEFIN COMPLEX, JAM PETROCHEMICAL COM. (JPC) Assaluyeh-Iran, 02.2004-08.2007.
POSITION: Piping lead eng., coordinator and senior supervisor. I was in charge of piping discipline in NARGAN supervision team.
Major activities:
-Supervisor of piping and support prefabrication/erection.
-Solve and answer technical query in piping and support nonconformity.
-Exercise the code and standard such as ASME & API in piping work to comply with the requirement.
-Define work Package.
-Attend technical meeting with relevant specialists to review and coordinate construction and pre-commissioning topics.
-Check time schedule, manpower and man-hour.
-Provide technical guidance to less-experienced engineers.
-Record work of contractor for daily progress-report and monthly invoice-checking.
-Check mechanical integrity of piping system and conduct hydro test.
-Prepare and issue construction punch-list.
-Approve punch-removal certificate.
-Approve ASBUILT drawings.
-Approve piping reinstatement certificate.
-Approve mechanical completion certificate, MCC of MC dossier.
------------------------------------------------------------------------------------------
Training
-CADPIP, MicroStation
NARGAN ENGINEERS & CONSTRUCTORS- Iran, May.2001.
-PDS
LINDE AG-Germany, Dec.2001.
-PDMS
NARGAN ENGINEERS & CONSTRUCTORS- Iran, March.2008
-HSE (including ISO 14001 and OHSAS 18001)
NARGAN ENGINEERS & CONSTRUCTORS- Iran, Nov.2007
------------------------------------------------------------------------------------------
Publication
-H.R. Daghyani, S.Eshaghi, H.Hosseini, "Fracture Analysis of Repaired Panels With Adhesively Bonded Composite Plates." The Second Asian Australasian Conference on composite Materials (ACCM-2000), Kyongju/Korea, 18-20 August, 2000, Pp.1291-1296.
-H.R. Daghyani, S.Eshaghi, H.Hosseini, "Fracture Behavior of Repaired Panels." First International conference on advances in Structural Engineering and Mechanics, Seoul/ Korea, 23-25 August, 1999, Pp.1291-1296.
------------------------------------------------------------------------------------------
Engineering Skills and Language
Computer literacy
-Plant design software: PDS, SmartPlant Review, jet stream-NAVISWORKS, some experience with PDMS.
-CAD: MicroStation, Autocad, CADPIPE.
-FEM & stress-analysis softwares: NISAÉÉ, some experince with CeasarII and FEpipe.
-MS Office: Word, Excel, FrontPage and some experience with Access.
Engineering abilities
-Theoretical and practical knowledge of Mechanical engineering science.
-Knowledge of various design and calculation in piping.
-Knowledge of Codes and Standards in piping.
Language
-English is fluent. 6.5 overall band score in IELTS ACADEMIC,31.01.04
------------------------------------------------------------------------------------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2151 to 2200 of 9906)

Go to Search Parameters...

Brief Description

Instrument Designer/6 years of experience in Instrumentation Engineering & Construction Design

Installation, Wiring, Loop checking, Calibration commissioning of new electrical instrument and project

+12y of experience in the oil industry, especially onshore& offshore oil drilling service which has worked in the Senior Electrical engineer in more than two company to the position of Assistant Director of maintenance

Petrophysicist (Senior Geoscientist) with almost 7 years experience, Skills: Log Analysis and interpretation (Cased Hole/Open Hole) Integrated core and log data analysis, petrophysical moddeling, reserves evaluation, base knowledge of seismic interpretaion

marine, Industrial Journeyman Electrician

I have over 10 years experience out of which has solid 7 years of experience both as a Project Leader and a Team Leader and is has excellent understanding of project life cycle, quality systems, data migration, risk management, software testing, data modeling and developing specification

I M WORKING AS OPERATOR SINCE IN PETROCHEMICAL FIELD SINCE 15 YRS.

Firoz Khan, A NACE CP Level 2 , have had a great deal of corrosion / Cathodic Protection experience in Pipelines, Above/Under ground storage tanks, Jetty & Offshore Structure. Have done a lot of CP Surveys also.

Production/Development Geology, Exploration geology, Sedimentology, Sequence Stratigraphy, Geomodeling, Seimic interpretation, Reservoir Characterisation, Petrel.

I have M.Sc. in Mechanical Engineering and as a Piping Engineer I have 7 years experience both in design and construction phases of oil, gas and petrochemical projects led by International firms like TECHNIP and LINDE.

My career ambition is to be working for a firm that allows me to work with Electrical Power Generation, High Voltage/Low Voltage Power Supply Systems, Sub-stations, Distribution, Transmission Lines, Protection and Metering Scheme Design, Installation, Testing, Modification and Maintenance. Qualific

I have dedicated 14 years in the corrosion protection, corrosion monitoring, material selection and material upgradation in Oil and gas based industries. For the last two years I have been associated with the Inspection Management System and Risk Based Inspection programme being developed.

Expert in alignment, maintenence, troublrshooting, overhouling with nice computer knowledge

Fourteen years of experience in Estimation & Proposal preparation of Co - Generation Boilers, Refineries & Oil, Gas and Petrochemical Plants. Well versed in all aspects of Estimation and commercial terms & conditions of contract.

Excellent working knowledge in Piping stress analysis using caesar II

Instrument Engineer with MBA having 10 years Expeience in Refinery & Chemical Industries Project & Maintenance.

Stractural/ Mechanical Engineering

I am a Chemical engineering graduate with Diploma In Industrial Safety and having 15 yrs. experience in Refinery, Petrochemicals, Oil and Gas plants with SHELL- PDO OMAN LLC,Reliance Petroleum Ltd , Enron in Off Shore Power division for LNG regassification unit, Cairns Energy India pty ltd for Laxmi

worked in oilfield since 1975 on the rig as Roustabout to Senior Toolpusher and OIM, in the office as Drilling Superintendent and Operations manager

I am a Diploma holder in Electrical Engineering. I worked 8 years in Indian Engineering Companies as Engineer. Later i started my career in Oil and Gas Industry. I am capable of serving the position as Electrical Maintenance Supervisor / Foreman. Now i am working in Sudan.

Purchase and logistic Management with +14 Years Experience

Dy. Manager- Operation, Panel Operation,Pre-commissioning & commissioning Exp.

More than 30 years experience in corrosion protection

Surveyor working with Lloyd's Register Asia

Exprience in Honeywell Systems,Zyton,Qualitronics,Syris,Diginet. Skilled in all fire systems and BMS.

Self-motivated and experienced Supply Chain professional. Possesses over 28 years of knowledge in materials, logistics and shipping Has well proven team leading and organisational skills which have been proven in a dynamic and challenging supply chain environment

A Fire fighter/ Officer in Charge with 17 years experience of emergency response operations and fire prevention within a ‘top tier COMAH-registered site’ for a major blue chip chemical company.

Having Over 10 years of experience in Documentation in Oil & Gas Industry using EDMS

This is a letter to whom it may concern, Rod Berry is a driven person when it comes to safety, I didn’t get a chance to work with Rod but a short time. I would recommend Rod to anyone as a safety officer; he is very detailed when it comes to safety. The short time I did work with Rod, we did manage

I am a Mechanical Project Executives around 7-1/2 years of experience in the field of Project management, Construction of Offshore structures & pipelines, Oil & Gas, and mechanical structures

A keen analyst with 11 years of experience in QMS Implementation, Testing & Inspection, Inspection Co-ordination, Welding Operations, Audits etc.

NDE Project Manager, III Ultrasonics ASNT/ACCP/EN473, Phased Array, TOFD, API 510 (lapsed), CWI (lapsed)

Results-oriented Petroleum Engineer with 17 years experience in the International Oil Industry with an in-depth technical appreciation of production practices.

Canadian Citizenship, twenty-year work experience in the oil/gas and mining industry with very strong skills in geology and geophysics, reservoir management, Development and Production and production engineering. Very proficient in computer software applications for resources estimation, project eva

Piping &pressure vessel design

Core business is scaffolding; Consulting, controlling, supports, execution business. in Oil & Gas industry and construction industry

I am M.Tech and got 13 years of experience in the field of process automation & controls

Mechanical Field Service Technician

Graduate with 6 months Fire Fighting Training from Japan, four years experience as Fire Chief of Lahore Metropolitan Fire Brigade, Eight years experience as Fire Prevention Officer [District Civil Defence Officer]

Coil Tubing Supervisor. An extensive Knowledge of onshore, Desert, swamp and offshore Well service techniques have been gained on a variety of completions, including Oil & Gas producers, water & gas injectors and Deep-Sea wells which are outlined as follows.

Extensive experience processing marine and land seismic data. Familiar with data worldwide including Geometry QC, Refraction Statics Solution, Tidal Statics, Velocity Analysis, Multiple Attenuation, DMO, Coherence Filters and Migration.

Master Mariner

Petroleum engineer speciality drilling, 44 years old, 14 years middle east experience at SHELL standards, tollpusher, rig manger, drilling superintendent experience, drilling, completion, workover, fishing experience

I am interested to fulfill one of the geologist position in your company, here in I apply for that slot. I have been working on the several oil companies for more than 15 year experiences to look at some hydrocarbon basin studies throughout Indonesia

I am currently seeking a new assignment as my present project with Shell Houston on the construction /Integration/commissioning of topsides for the FPSO BONGA has recently come to an end in Nigeria. I was the QA Lead supporting and auditing on/offshore construction activities and based in Lagos.

Diverse experience as a petroleum, mechanical and environmental engineer. Areas of specialized knowledge extend from personal management, completion, operations and production engineering to project engineering and project management.

Instrument Electrical. Real polyvalent-Electronics: Fire detection/gas detection/communication system and hydraulic systems(crane, wellhead control)

14 year-experience(6 years in Arabic World) in Oil&Gas and Petrochemical Industries as C&I Engineer(Technician).Involved in design, construction, commissioning, startup, shutdown and maintenance of some plants.I worked with great companies – ANSALDO, BROWN & ROOT, SHELL, LUKOIL.

Leading team of process engineers for oil and gas process engineering work (Conceptual, FEED, Basic and Detail, etc)

5 Years of Digital DCS Control systems erection ,testing and commissioning experience.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 [ 44 ] 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out