Resume - Interested in jobs in Saudi Arabia only. Although, I specialize in biomedical se...

Misco Jobs

Resume #70148

CONTACT INFORMATION:
View contact information...

PROFILE:
Over 15 years electrical engineering and research experience. Strong practical and theoretical background in semiconductor physics, electromagnetic-acoustic wave propagation in piezoelectric crystal waveguides, biochemical sensors, signal processing, analog circuit design and more.

* 3 years award-winning teaching experience (semiconductor physics, electromagnetics, circuits, etc.) at undergraduate level. University of Maine graduate teaching assistant of the year, 1993.
* Three years independent research and development experience (biochemical sensors).
* Four+ years experience designing analog/digital and microcontroller circuits.
* Four years project engineering experience.
* Two+ years experience in an RF (50MHz to 700MHz) lab.
* Proficient with SPICE, MATLAB, C, Atmel RISC microcontrollers, Mathcad, MAPLE and Scientific Workplace, AutoCad Lite, and all MS Office products.

WORK HISTORY

Goodrich Pump and Engine Controls: (www.goodrich.com ): Senior Electrical Engineer, 3/07- present. Responsible for failure analysis and redesigning legacy products for improving yield and reliability.

Hamilton Sundstrand/ United Technologies Corporation (www.utc.com ): Senior Electrical Engineer, 5/04 – 3/07. Provide engineering support for electronic control systems for large jet engines. Extensive software and hardware analysis, troubleshooting and failure analysis of customer returns.

Cooper/Crouse-Hinds Airport Lighting Products (www.chalp.com): Project Engineer, 2000-1/04.
Solely responsible for design, scheduling, cost/component analysis, interfacing with many vendors, qualification testing and transfer to production for 1-3 below:

1. Highly sophisticated fail-safe circuit for maintaining constant current output for airfield lighting. Final product has self-monitoring and correcting capabilities, allows for in-field troubleshooting and software updating. Developed all software, circuitry, circuit diagrams, and wrote all instruction manuals. Passed on first time through Federal Aviation Administration (FAA) qualification testing.

2. 700W ferroresonant constant current controller. Designed to interface with existing circuitry and to comply with Mil-Std 461 for electromagnetic emissions. Wrote all documentation, including qualification test program, production test procedures and instruction manual. Passed all FAA qualification tests.

3. Designed power supply circuit for highly accurate electrolytic tilt sensor. Patentable circuit operates from an AC current or voltage source, while meeting very strict cost target. Passed on first time through FAA qualification testing.

4. Patent pending for the co-development of low power, high power factor power supply for airfield LED lighting. Solely developed innovative software algorithm for monitoring and precisely controlling LED output via pulse-width modulation. Loaded with features, such as end-of-life detection, accurate RMS to DC conversion, self calibration to compensate for component variations, etc. Passed on first time through FAA qualification testing.

Andersen Laboratories, Inc (now www.micronetworks.com ): Design Engineer, 1998-2000.
Designed Surface Acoustic Wave filters, including both dispersive and non-dispersive bandpass filters (50-700MHz). Extensive use of fourier transforms, software simulations, and RF testing.

Project Engineer for novel wafer level packaging technique, including scheduling, research, design, testing and prototyping. Interfaced with many different vendors, scientists and engineers to coordinate project.

Biode, Inc (www.biode.com): Research Engineer, 1995-1998.
Developed surface acoustic wave biosensors (90-200MHz). Independent R&D included optimizing interactions of biofilms with evanescent acoustic/electromagnetic waves. Derived theory for predicted response. Required knowledge of waveguide theory, acoustics, as well as proteins and DNA and their attachment to organic surfaces. Designed and implemented dozens of experiments over three year period.

University of Maine (www.umaine.edu): Graduate Teaching Assistant, 1991-1995.
Supplemental teaching for Semiconductor Physics, Electromagnetics, Microwave Lab, Circuits Lab, and Communications theory.
University of Maine Graduate Teaching Assistant of the year, 1993.

National Semiconductor (www.national.com): 1987-1990.
Product support for digital components, including testing, redesigns, and failure analysis. Trained for three months at manufacturing facilities in Malaysia and Singapore. Taught seminar on VLSI design (integrated circuit plot layout) in Malaysia.

EDUCATION:
MSEE University of Maine, August 1997.
Plus 17 additional credit hours towards PhD.
Specialized in Surface Acoustic Wave sensors, signal processing, and interaction of acoustic waves with biological materials.
BSEE Rochester Institute of Technology, 1987.
Emphasis on Microelectronic Engineering, consisting of semiconductor processing, modeling, and electrical testing.

PUBLICATIONS:
"Characterization of an Acoustic Plate Mode Immunosensor", Master's Thesis, University of Maine, August, 1997.

"Comparison of surface transverse wave (STW) and shear horizontal acoustic plate mode devices for biochemical sensors", Frequency Control Symposium. Proceedings of the 1997 IEEE International, pp. 147-155.

"Selective Acoustic Plate Mode DNA Sensor", Fifth Int'l Mtg. On Chemical Sensors, Rome, Italy. Sensors and Actuators B. Chemical, Vol. 24, Issues 1-3, March 1995, pp. 129-133.

"Improved Acoustic Plate Mode Biosensor", Sensors and Actuators B. Chemical, Vol. 13, Issues 1-3, May 1993, pp. 437-442.

"Applications of Unidirectional Transducer in Acoustic Plate Mode Biosensors", Ultrasonics Symposium, Baltimore MD. Proceedings of the IEEE 1993, Vol. 1, Oct. 1993, pp. 331-335.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 451 to 500 of 9905)

Go to Search Parameters...

Brief Description

Over 22 years’ professional experience in Conceptual, FEED, Detailed engineering and project management in Oil & Gas, Refinery, Petrochemical and Chemical projects.

Electrical and Instrument Project Execution, Installation and Estimating

Telecom field technicians Customer end

Procurement, Contracting, Logistics and Inventory management

QA / QC Engineer - Painting / Coating / Insulation / Refractory / Fire-proofing

Principal Engineer with 20 years Umbilical, Flowline and Riser Experience Design, development and installation of flexible Flowlines, risers, umbilical and oil offloading lines and associated ancillaries. Including dynamic, structural and on bottom analysis.

Free! I am a chemical engineer having 17 years of work experience in India and Bahrain at various management levels in process engineering and operations, troubleshooting of of Fluidized catalytic cracking, gas compression, concentration units, and hydro processing units, gas treatment & sulphur recovery

Having 24 years of experience in IT Industry, working in different roles, initailly started with Analyst Programmer and now working as QA Manager in an Offshore software development company in Pakistan and supporting UK based clinets. Would prefer to work in QA department or Project Coordinator.

22 years of experience in instrumentation maintenance,commissioning and start up activities in various oil and gas companies ,offshore platforms in the gulf and India like ADGAS,Dubai Petroleum Company,Qatar Petroleum etc,,

Two years post apprenticeship training as a Welding Engineer, under the supervision of the senior welding engineer, working on the manufacture of overland pipelines, pressure vessels, nuclear pressure vessels, heat exchangers and various projects for the Middle East and Libya.

Totally 25 years experience in execution of Electrical Maintenance works in 210MW, 150MW, 120MW and 20MW Generators, Transformers, Breakers, Motors, UPS, MOV, EOT Cranes, HVAC, Lightings, Protection Relays Testing, electrical equipments and PLC, DCS, SCADA, WinCC, S5, S7 hardware

24 years of operation experience in Petrochemical Industry

QA/QC Instrumentation Engineer / Inspector - 17 years experience in Oil & Gas (16+ years in Middle East with Saudi Aramco, PDO, KNPC, ADNOC & RAS LAFFAN), Certified Lead Auditor, GCC & International Driving License, Well versant with Codes & Standards

Managemen and Multidiscipline Engineerign Coordination of Oil & Gas Industry |FEED and Detail Engineering Projects.

Bachler in Arts + 3 yeart Appranticship in Instrumentation and control

Experienced Drilling Supervisor, Well site supervisor Years of experience on many drilling and completion projects.vertical,horizontal, multilaterals and some erd. I have worked throughout central U.S. and The Republic of Kazakhstan.

Experienced in Mechanical & Electrical Installation Of Equipments in Plastics & Petrochemical Industries

having 18 years of sound experience in Commissioning and design, with Bachelor degree

Development and implementation of Safety Mgt System, OHSAS 18001 Auditing, Development od SOPs, Safety Training, Compiance of regulations

unigraphics designer drafter

Interested in jobs in Saudi Arabia only. Although, I specialize in biomedical sensors and microelectronics, willing to try out other areas of Eng.. I have more than 15 years industrial experience in diverse engineering disciplines.

I am a Senior DCS/Instrument engineer with 19 years of experience in Project engineering, Construction, Commissioning and Maintenance support of Oil/Gas & Petro chemical industries.

Safety/HSE Manager

Plant commissioning, trouble shooting, revamps, cost reduction, productivity improvements

Logistics and Operations Support included construction management transportation and Procurement Management FCILT MS UC Berkeley in transportation engineering with 24 years experience, recent 10 in Oil and Gas

20+ years RE experience in brownfields, greenfields, offshore, onshore, dry gas, gas condensate, light, medium and heavy oil, sand and carbonate. Expert in WT design and interpretation, Reservoir Simulation, Horizontal well, Tight Gas, Hydraulic Fracture,Fractured Carbonate, EOR (WAG, CO2, Thermal)

I am a diploma holder (3yrs course). Having wide knowledge on electrical / Instrumentation / process control panel board operation. Having 19+ year experience (includs 12yrs Oil and Gas plant). Looking for rotational jobs

Petroleum Engineer, Well Site Supervisor

13 yrs exp in oil industry with 6 yrs as a Geologist. Worked in different countries of Asia & Middle East with numerous clients. Experience in clastic, carbonate, & basement reservoirs, HTHP wells, horizontal drain with geosteering tools. Currently working as Wellsite Geologist for Total Yemen.

Telecomprofessional with 30 years of international experience in Africa, Middle East, Europe and North America seeking next assignment

Staff Petrophysicist with a wide range of skills in petrophysics, over 20 years experience working in many parts of the world.

25 years Drilling, Completion, Work-over Supervision. International experience Dominican Republic, Venezuela, Oman, Qatar, Ecuador and North Sea. Domestic experience Kansas, Oklahoma, Colorado, Texas, Louisiana and Alaska. Sub Sea experience Gulf of Mexico and North Sea.

22 years of aircraft maintenance related experiences with the United States Air Force

Efficient and Self-motivated Process Personnel

NAME SANJEEV S. KULKARNI QUALIFICATION : MECHANICAL ENGINEERING EXPERIENCE : TOTAL 25 years oil field

Currently working for Raslanuf oil and Gas Company (RASCO) as Senior Process engineer, Working within Technical services department Process engineering Division.

Petro-Chemicals Operations, Training, Technical Writing

Reservoir, simukation and production engineer

Experience maintenance planner in oil and gas industry. Also has experience in quality control and inspection of materials and spare parts. Knowledge in MS Office applications and Maintenance Managment Computer System

I am a successful, experienced and qualified Start up Specialist, Commissioning Production Supervisor, FPSO Trainer with over 28 years extensive experience (both onshore and offshore) within the oil, gas & petrochemical industry.

Electrical Engineer Technician; 14 years experience; Master's Degree; Commissioning; Pre- commissioning; Inspection; Testing; National Electric Code

I am a mechanical & metallurgical engineer experienced in QMS ISO 9001:2000, internal auditing, welding, NDT, materials etc

17 years as Executive Admin., currently licensed Realtor, Earned BBA in Business and requirements for Accounting degree. Microsoft Office proficient. 4 years as Budgeting Analyst.

Topsides Manager..FPSO

Certtified hygienist with more than 30 years of experience. Presently working both onshore and offshore in the Middle East. Qualified OHSAS 18001 auditor. Masters degrees in both Occupational Health & Environmental Management. Excellent interpersonal skills. Looking for challenging position.

Key Competencies: over 20 years of experience in technical jobs: On shore, Oil, Gas and petrochemical and Power Plant Industries involved in Project Management, Commissioning Maintenance and repair, Lubeoil/seal oil flushing of compressors and pumps, QA/QC rotary and static equipments, etc.

Senior Mechanical Engineer (Projects/ Engineering / Design). I have diversified experience of about twenty-four (24) years in the field of Design & Projects Construction of Gas & Oil Production(onshore / offshore), Artificial Gas Lift, Water Flood and Oil Refining.

3 years working in PAE as Main Drllg. Eng. in charge of vertical & horizontal wells (oil & gas). 9 years w/Total (Argentina) as Drllg. Sup. onshore & 2 years as Coman Senior offshore ( jack up).Several positions f/Drllg trainee to Drllg Manager in Drllg Contractors Companies.

Strong background experience (19 years) in petroleum engineering, optimizing oil & gas fields, plants operations and gathering systems. Leading operation team in planning and monitoring production activities

Analyze requests for contracts initiation and develop contracts packages, set and recommend qualification / evaluation criteria and negotiation strategies and attend the same, coordinate and advise users Divisions on contractual and commercial matters.

First 1 2 3 4 5 6 7 8 9 [ 10 ] 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out