Resume - I have earned 20+ certifications and growing. Is attached to my resume.

Misco Jobs

Resume #70196

CONTACT INFORMATION:
View contact information...

Profile:

Safety professional with an extensive background in both Environmental Management and Oil and Gas Industry. I am seeking a position in the Safety and/or Environmental field which will utilize my education, experience and managerial abilities. I¡¦m a highly motivated professional with excellent work ethics and a positive attitude towards learning and getting the job completed.

Education:

Texas State Technical College 1995
Associates of Applied Science in Hazardous Materials Management
Associates of Applied Science in Occupational Safety and Health
Graduated Conroe High School 1976

Skills:

„« Knowledge and understanding of Safety and Environmental management in Petro-chemical and other hazardous work environments providing direction and mentoring to various safety committees.
„« Regulatory knowledge including that attached to reduction/recycling programs and to developing Company Environmental Management System based on ISO-14001
„« Have behavior based Safety experience
„« Experience in building trust and loyalty and respect in Safety teams and Professionals I have worked along side with.
„« I am an experienced trainer in Scaffolding, Fall Protection, Respiratory and eye protection as well as developing and implementing safety classes for employees on site.

Resume: Kirk Davis pg.2

Certifications:
A. Antarctica Service Medal - was a participant in the U.S. Naval Support Force in McMurdo Station Antarctica.
B. Certificate of Appreciation for the Donic Shriners Temple
C. Member of Who's Who and the American Society of Safety Engineers
D. Certificate for 30 hours in Safety & Health Standards for Construction Industry (29 CFR 1926)
E. IS-1 Emergency Program Manager Certified from the National Emergency Management Institute
F. IS-7 Citizens Guide to Disaster Assistance Certificate from the National Emergency Management Institute
G. IS-3 Radiological Emergency Management Certified from the National Emergency Management Institute
H. IS-2 Emergency Preparedness Certified from the National Emergency Management Institute
I. IS-5 Hazardous Materials - Citizens Orientation Certificate from the National Emergency Management Institute
J. H2S Safety and Emergency ESRESS Certified from T.S.T.C.
K. 40 hour Haz Woper Certified from Omni Environmental Inc.; According to 29 CFR 1910.120
L. Open Water Survival Certificate
M. Down Helicopter trained and certified
N. Electric Crane trained
O. Escape Survival pod certified
P. Crew and work boat Safety trained and certified
Q. Fire Extinguisher Certified and trained
R. Accident Investigation trained
S. Evaluation and Identification of noise hazards

More Qualifications are available upon request

Resume: Kirk Davis pg. 3
Career History:
2001-2005 Veco; Safety Technician; Supervisor: Rick Meredith Phone: (India) 011-91-9949778467
„« Made sure Refinery was OSHA compliant and environmentally safe. Made recommendations using OSHA codes and relying on work related experience.
„« Trained men in safety procedures and how to work safely. This training resulted in significantly reduced injury accidents and less environmental complaints and fines.
„« Did accident investigation and reports for company department heads that identified potential work hazards and environmental controls that needed to be addressed or even rethought as to make these controls more effective and cost efficient.
„« Controlled noise levels in work area as well as in the environmental arena as not to cause any unnatural avalanches or any other unnatural events that would affect company areas and responsibilities as well as the untarnished nature reserves in the areas.
„« Monitored air quality and provided respiratory training to all employees to ensure compliance with the Alaskan authorities. The Alaskan authorities have the most stringent air quality and noise restraints than any other entity in the world as far as I know of. I was never cited nor warned of any deficiencies in my noise and air quality program.
„« Instructed and installed eye contamination stations throughout the delta junction project during the relocation of the control center in Anchorage Alaska.
„« Made safety recommendations on any and all construction projects on the Ultra-Low Sulfur Diesel Project at the Flint Hills Resources Refinery in North Pole Alaska.
1996-2001 Fairfield Industries Seismograph; Safety Technician
„« As Third in Command, I made all three ships OSHA compliant as well as the personnel by establishing training classes, making the crew aware that I was interested in the crews¡¦ ideas and thoughts. The crew informed me that they didn¡¦t know that their ideas and thoughts meant anything to management. With this information I then proved that I would make the necessary changes to bring about a mutual trust and dialogue between the workforce and management. The injury accident rate dropped to virtually nothing.
„« Trained Personnel for Insurance purposes; the numbers changed from 3% trained personnel to 98.6% trained personnel in less than 9 months with 456 men. This seem to make the men feel that the company cared about these men enough to train them in something besides their jobs in which it made them part of the company themselves in which translated into a 30% reduction in insurance premiums.
„« Took care of all injured or sick personnel because I have advance medic training and a lot of medical training that spans back to my senior year in High school when I was an Asst. Lab Pathologist in the Conroe Hospital..
„« Did all orientations of new personnel in which consisted of instruction of all company rules and regulations as well as all the Safety Expectations that I expected the employees to adhere to as well as learn what their safety knowledge consisted of. I set the employees up with training classes that directly fell in line with their given job duties.
„« Escorted all men to and from docking during crew change to assure that they followed all Safety regulations and expectations set by the company and any OSHA regulations.
„« Made all Safety inspections and recommendations on all ships. These recommendations ranged from Emergency Egress departing stations to noise dampening materials used in the engine room to the fire fighting PPE needed to fight onboard fires. I also held monthly fire drills to abandoning ship drills to appointing fire squad leaders and promoting written as well as physical tests.
„« Supervised all dangerous operations which included taking on fuel at sea to rescue of overboard personnel. I set up Safety classes with outside safety contractors to train personnel on downed Helicopter training along with water survival and floating techniques.
Resume: Kirk Davis pg.4
1988-1992 International Telephone and Telegraph: McMundo Station, Antarctica; Welder Assistant
„« Made radar reflectors, Helped my welder to interpret hand drawn blueprints to where we could build what they wanted. Kept shop clean and well stocked with welding rods and all the other tools required.
„« Worked with Scientists, pre-fabricating any type of instruments required by Scientists. Made all other tools and instruments needed by all other departments at McMurdo Station.
„« Made Heavy duty fishing poles for Scientists to catch Antarctica Cod fish to run tests on to see why the fish don¡¦t freeze even when the sea water freezes.
„« Traveled to other camps to make repairs of machinery or living quarters or to remove or to set diving bell for observation of marine life.
1980-1988 Sunoco Production; Rig Production Assistant
„« Changed out pressure gauges on Christmas Trees along with replacing charts that showed any interruption of gas flow into the pipeline.
„« Made repairs on the Sub Service Pressure Valves
„« Changed out Graphs on the flow meter
„« Cleaned and maintained all levels of the rig
„« Replaced and serviced all oil fittings on valves and Christmas trees
1978-1980 Arco Refinery; Laborer
„« Cut out pipeline corridors with chain saws and clippers
„« Isolated faulty valves and changed them
„« Dug pipe trenches to engineers¡¦ specifications to ensure the safety of the personnel within the refineries
„« Changed out charts at the storage tank yard; showed transferring of fuel oil to the refinery or the storage of raw crude
„« Monitored the Capacity of crude oil in tanks and redirect the crude to the rail yards or the refineries
„« Reported any and all activity to my supervisor along with the charts collected showing the movement of all crude
1976-1978 Zapata Warrior Drilling Rig; Roustabout
„« Ran a crew of 4 Roustabouts and maintained all oil fittings on rig and disposal of old oil
„« Maintained all levels of operations from crane operations
„« Kept the draw works free of all debris and in good working order so we could keep the drill pipe moving to the floor.
„« Kept all legs of the jack up rig greased up and free of debris for jack up operations
„« Helped on drill floor as a roughneck. When someone would get injured or they were short handed.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3001 to 3050 of 10014)

Go to Search Parameters...

Brief Description

HSE Officer with a background of over 19 years in handling safety, Health and Environment in large multi international Oil & Gas, Chemical and Construction Companies (industrial, power plant, petrochemical, marine facilities and heavy fabrication).

15 years of utility/specialty chemical management experience.

. I have strong leadership skills and proven ability to manage and motivate a team to achieve assigned results. Through my previous jobs, I have learnt to provide and maintain consistent high standards and service.

Presents and reports the project status to the top management.

I am expert in Mechatronics field.

As an ambitious, inquisitive, self motivated engineer, I have been working as a workover & completion engineer since 2004. Cementing, acidizing, fishing, drilling, offshore gas well completion, deep shore well completion are the main subjects of my experience.

Refinery / Utility Plant Operator

07 years extensive experience holding a various positions in different phase of the projects in the field of Instrument Pre-commissioning, commissioning, start up,

NG reforming, Shift convertion, Syn gas production, Diffferent types of pumps and compressors, heat exchangers, catalytic reactor operation

I am a Mechanical Engineer and have more than 6 Years Experience in Piping Design and Stress Analysis Engineering. I have worked with CAESAR II software in developing Piping Stress Analysis and I also have substantial experience in the design of interactive CAD software; Moreover, my job involves sp

GIS/CAD specialist

As Cathodic Protection Engineer in Power Plant / Oil & Gas Industries with about 7 years experience; having knowledge on diverse Construction/Engineering Design /Commissioning/Maintenance activities with extensive experience on Cathodic Protection with NACE Level II certification.

I am searching for a job as a pipping stress and supporting engineer in KL, Malasia and I am expert in using CAESAR II and PDMS and ANSYS soft ware

Mechanical / Electrical experience in Boilers, pumps, HVAC Systems, Compressors, steam systems and ancillary services, DHW skids, Chillers, Cooling Towers, Clean steam Boilers, Purified Water Systems, waste water, Low voltage Electrical Systems, Preventive Maintenance Systems.

A highly motivated, adaptable MSc graduate.

Plant operator

Surface well test engineer

I 'am a highly skilled Sr. Lead Operator, with a strong English language, highly motivated, always exceed my employers expectation, hold a 2 years Oil & Gas Handling diploma, various computer skills " SAP, Lotus, Excel, Access, Word, Process Net a semi HMI Building Progam.

Progressive EMS Paramedic Exp.

I have earned 20+ certifications and growing. Is attached to my resume.

Structural Designer With 9Yrs. PDS,Microstation & Autocad Experience

Work Experience: I have extensive experience in the repair, maintain and rebuild work with the following list of engines, etc. Wartisila (Varsa 32) Ulstein Bergen, (KVG12) Caterpillar, (D379, D398, D399, D3408, D333) Detroit Diesel, (in line 3-71,6-71,V-12) Lister, (2-3-4 Cyl.) EMD, (645s) Cummins

More than 25 years experience in electrical field.

Meticulous finance professional, current Controller of Mining Operations with twenty-two continuous years of challenging professional experience in the areas of audit, banking, accounting, cost control, budget, financial management and controllership. Hands-on executive.

I am a Piping Engineer experienced in Piping Stress analysis, Complete Piping engineering activities, PDS expertise. I believe that my enclosed resume will demonstrate that I have the characteristics and experience you seek.

Over 14 yr of experience in dealing with Automation, Instrumentation & control systems. 11 years in Project Sales. Working experience with Honeywell & Yokogawa. Presently, located at Doha, Qatar, working with Automation/IT Company.Handling DCS, PLC, FGD System,Field Instruments.

An Electrical Engineer with over 12 years of hands-on experience in Maintenance of Assets and Utilities in a Gas based Petrochemical plant and Integrated Steel Plant with Rich Managerial and technical capabilities in Installation/Commissioning and Upkeep of Electrical Equipments.

AWS, CSWIP 3.1 AND ASNT LEVEL II IN RT,UT,MPI & DPI

Pipe stress engineer with eight years experience.Software Caesar II.

8 + years Oil & Gas field experience in Instrumentation and Control engineering. Lastly Worked as Assistant Resident Engineer for Tyco Fire & Security, UAE

Electronic/Instrumentation Engineer with experience on Electronic control systems ,PLCs,Maintenance of Downhole instrumentation systems etc

11years experience in the field Mechanical Maintenance of Machine shop and Foundry

Gas turbine, Boiler, Water treatment, Oil and gas operator

To operate shutting down / starting-up the processing plant assigned to an Offshore / Onshore platform for collection, treatment & inward transmission to consumers of oil & gas. To mix chemicals, prepare the plant for routine / planned maintenance and carry out first line maintenance.

Condition monitoring Engineer with 7 years experience in oil and gas industry

I have been involved with many projects throughout these regions, from Heavy Construction, Platform Installation and Inspection IRM programs.Also I have more than 3 years experience in NDT/Welding Inspector in various project. I just recently pass my Subsea Insp. Controller CSWIP 3.4U(TWI-UK).

Piping, mechanical, stress analysis, nuclear

I have done Master from M.Sc. Chemistry. I worked in Shell Pakistan Ltd. as a Q.C.Analyst.

KNPC & KOC approved planning engineer for EPC projects,Involved in Planning and coordination for the KNPC GRTA- 2006 shutdownInvolved in Planning of Major Shutdown for KOC -GC 27

An experienced metocean engineer/hydrographic surveyor/GIS technician/coastal engineer seeking suitable positions in related fields

Welding and NDT Supervisor, Lifting Equipment Inspector

Subsea Pipeline & Riser Installation engineering with Offpipe or Orcina Software(Orca Lay, Orca Flex

Computer :

My expertise includes strong hands-on technical skills with ECLIPSE and MBAL software applications. I am highly skilled in EOS fluid characterization, well test analysis, reservoir modelling, manage mature reservoirs, well monitoring

Welding Superintendent: SSCL. DME (3years welding), WI (QA/QC) 1992, Safety Training qualified and 21 Years Experience (QA/QC Welding Engineer-01 Year; Welding Supervisor--12 Years; Welding Educator-04 Years; Welding Instructor-02 Years) in working with ASME, AWS, API standard in EPC Industries

WORKING AS ASSISTANT MANAGER - PRODUCTION / SHIFT INCHARGE IN A LEADING PETROCHEMICAL COMPANY AT IMPORT, STORAGE & HANDLING TERMINAL

Electrical Manager with 18 years of hands on Experience of Executing Green field Engineerg project of Copper SX & EW, Cobalt SX &EW, Leaching and Flotation plant. Electrical equipments ranging from HT & LT panels, HT & LT motors upto 7700kw, variable frequency drives upto 5000kW, Hot & Wet ESP's.

DCS Control Room Operation In Hydrogen. LPG MEROX At World Largest Petroleum Refinery In Reliance Industries LTD

Ten (10) years of accumulated experience in construction engineering, project planning using Primavera P3 ver. 3.1 for more than six (6) years, and project management. Last seven (9) years with Saudi Arabian Oil Company (Saudi Aramco), Saudi Electricity Co. - Eastern Region Branch (SEC-ERB) and Saud

cartographer - gis

First Prev 51 52 53 54 55 56 57 58 59 60 [ 61 ] 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out