Resume - Surface well test engineer

Misco Jobs

Resume #70228

CONTACT INFORMATION:
View contact information...

Objective: To acquire a position in an organization offering challenges, accountability
& An opportunity for career advancement.

Profile: A Young professional with sex years experience in four year in oil field
As a Instrumentation engineer and operator and three year in manufacturing unit as a Quality / Process Control, Result oriented visions & desire to continue learning.

Working Experience: Worked with M/s Techno Canada Inc. as an
Instrumentation Engineer for June 2004 to till date.

Company Profile: Techno Canada Inc. is a company incorporated in Alberta under the laws of Canada in the year May 2002.

TCI has been formed by professionals with a core background in the oil & gas upstream industry. Our experience ranges across the board from Well Testing, Nitrogen Services, Production Operations, Wireline Logging, Coil Tubing, Drill Stem Testing (Open Hole & Cased Hole) TCI personnel have been involved in major projects on shore and offshore

Field Operator:
Experience in daily visiting well head jackets to carry out various operation as per the program, Provide co-ordination during start up & shut down process, X-mas Tree operation Annulus valve, Master valve, Crown & wing valve operations, Well control Panel board operation, Annulus pressure bleeding operation, and the necessary repair and maintenance of the various well completion.
Well Testing:
Experience in testing of oil & gas wells using flow head, coflexip hose, safety valves,Emergency shut down Valve, Emergency shutdown switches with Push battun and ESD panel, data- header, sand trap, steam exchanger/ heater(Indirect heater), Separator, gauge/surge tank, oil/gas diverter manifold, Transfer pumps & snack burner booms. Also actively involved in regular maintenance & pressure testing of these equipment

Project Handled: 2004 In this period I have done first Oil exploration job (Surface
Oil Testing) under Techno Canada Inc., Admonton Alberta, Canad. well no.. # Lakhi – 1 Under Premier Oil Company.

: 2005 In this period I have done Second Well Testing Job done in Amguri Oil field of Assam under Canoro Resources Ltd, Jorhat Amguri Well no. 6 and 5.

: May 2006 to July 2006 in this period I have done Surface Well
Testing job at Andhra Pradesh Ravva Oil field well no RX – 9,
Godavari Basin under Cairn Energy (I) Pty. Ltd.

: March 2007 to May 2007 in this period I have done as a Surface
Well Testing & Production at Mehsana, Gujrat Oil field Well -1 &
2 with Essar Oil Ltd.

: August 2007 to September 2007 in this period I have done as a surface Well testing and production at Mashimpur well # 3 BV Oil field Cachar Assam under Under Premier Oil Company.

: November 2007 to December 2007 in this period I have done as a surface Well testing and production at Amguri Oil Field well # 10 & 11 under Canoro Resources Ltd, Jorhat Amguri.

Instruments Handled:

Pressure Transmitters, Temperature Transmitters, Differential
Pressure Transmitters, Controllers, Multi Loop Controller (MOD
30 XL+), Recorders, Temp. Scanners, Indicators, Annuntiators,
I/P Converters, Air Filter Regulators, Solenoid Valves, RTD's,
Thermocouple, Pressure Switches, Trip Amplifiers, Variable
Frequency Drives (AC Drive), PLC (Direct Soft), SCADA
System (Citect), Barriers, Mag. Flow meters, Conductivity
Transmitters etc.
Job Responsibilities

: Rigging up well testing equipment effectively and safety.

: Proper communication & under standing with heavy equipment operator to rig up the PTU.

: Prepare for flowing oil and gas wells thru Separator and clean ups.
Ensuring also the equipments are in good condition prior to use with the objective of improving the quality (Efficiency) of the operations.

: Routine pre & post job maintenance & pressure testing of well testing equipment carried out at base and work site.

: Assist in the compilation of well testing reports at the end of each task and plan activity following the data with supervisor.
Maintain tools and equipment in a safe operating condition and report defects to supervisor without delay.
Courses Done:

: Completed basic safety training courses like Fire Fighting, PST, MSVT

: One year Diploma in Computer Software (A.D.C.A.)

: MS-Word, Excel, Power Point, Corel Draw, Tally Language C, C++,
HTML.

: 45 Days Course in Auto CAD from N-Tech Computer Institute
Faridabad.

: One Week Training on Surface Well Testing Equipments
(Operational & Maintenance).

Working Experience as a: Quality/Process Sr. Engineer

(May' 01 to 2004) Indication Instruments Limited.
Faridabad, Haryana
An ISO-9001, QS-9000 & TS-16949 Certified company manufacturer of Automotive Dashboard instruments for all types of vehicles.
Company with having Five plants & 1000 Employees, is a Leading name in Dashboard instruments, capturing 70% of Indian market & also spreading Overseas.
Instrument based on Cross coil movements, Bourdon tube movement, Electronic sensing & Liquid filling instruments.
(OEM's to Telco, M & M, Hindustan Motors, HMT, Eicher, Ashok Leyland, Piaggio, Punjab Tractors etc.)

Responsibilities:
* To ensure Process quality as well as Final product quality of Electronic Assly.
* To solve the Quality problems occurring during Production
* Reduction of Waste in Supply chain
* Regular visit at customers end (both OEM's & Spare) to ensure customers satisfaction.
* Regular audit of Quality system to ensure regulatory compliance.

* Maintaining Quality system records & statistics for failure trends.

* Member of 3'S team.
Strengths:

* Analytical & multi disciplinary approach to solve the problem using trouble shooting skills (CAPA, 7-QC tools, CI projects).

* Sound knowledge of Quality Systems & TS-16949
* Good presentation skills with MS-Power point & projector for meetings & presentations to customers.
* Excellent interpersonal & team skills.

Achievements:
* Effectively addressed customer issues and provided quality service to
Customer through resolution of problems by visiting Major OE
Customers.

* Attended training programs for Quality system.

* Represented Company at Auto Expo' 2006 show at Delhi.

Professional Education:

May' 2001 Government institute of Engineer Sonipat (Harayana)

Diploma in Instrumentation and Control First division (63 %)

March' 96 Intermediate from Haryana board with (67 %)

April ' 2000 Graduation MDU Rohtak from Aggrawal collage Ballabgarh

MBA MDU Rohtak from Aggrawal Management collage Ballabgarh

Personal Memorandum:
Date of Birth: 14-09-1979
Father's name: Sh. Dhramveer Singh
Marital status: Married

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3001 to 3050 of 9922)

Go to Search Parameters...

Brief Description

Naval Architect with 6 years Experience of which 4 years in Indian Navy.

Iam chemist ,have working experiance in tow oil field service companies in UAE (Cementing&Acidizing) as a LAB ENGINEER and looking to get a good chance.

Working with GS Eng. & Const. Co. as Commissioning Superintendent for Ras Laffan Refinery project, QATAR.I have strong expertise in the area of pre-commissioning, Commissioning, Initial start up, stabilization of the process and operations, trouble-shooting & achieving production tgt

NDT INSPECTOR

Project Engineering and Management within and Oil and Gas Industry

Bachelor of Technology (B.Tech) in Electrical and Electronics, Good Knowledge of Autocad, ETAP and EDSA software

Drilling Engineer, Supervisor, Superintendent

HSE Officer with a background of over 19 years in handling safety, Health and Environment in large multi international Oil & Gas, Chemical and Construction Companies (industrial, power plant, petrochemical, marine facilities and heavy fabrication).

15 years of utility/specialty chemical management experience.

. I have strong leadership skills and proven ability to manage and motivate a team to achieve assigned results. Through my previous jobs, I have learnt to provide and maintain consistent high standards and service.

Presents and reports the project status to the top management.

I am expert in Mechatronics field.

As an ambitious, inquisitive, self motivated engineer, I have been working as a workover & completion engineer since 2004. Cementing, acidizing, fishing, drilling, offshore gas well completion, deep shore well completion are the main subjects of my experience.

Refinery / Utility Plant Operator

07 years extensive experience holding a various positions in different phase of the projects in the field of Instrument Pre-commissioning, commissioning, start up,

NG reforming, Shift convertion, Syn gas production, Diffferent types of pumps and compressors, heat exchangers, catalytic reactor operation

I am a Mechanical Engineer and have more than 6 Years Experience in Piping Design and Stress Analysis Engineering. I have worked with CAESAR II software in developing Piping Stress Analysis and I also have substantial experience in the design of interactive CAD software; Moreover, my job involves sp

GIS/CAD specialist

As Cathodic Protection Engineer in Power Plant / Oil & Gas Industries with about 7 years experience; having knowledge on diverse Construction/Engineering Design /Commissioning/Maintenance activities with extensive experience on Cathodic Protection with NACE Level II certification.

I am searching for a job as a pipping stress and supporting engineer in KL, Malasia and I am expert in using CAESAR II and PDMS and ANSYS soft ware

Mechanical / Electrical experience in Boilers, pumps, HVAC Systems, Compressors, steam systems and ancillary services, DHW skids, Chillers, Cooling Towers, Clean steam Boilers, Purified Water Systems, waste water, Low voltage Electrical Systems, Preventive Maintenance Systems.

A highly motivated, adaptable MSc graduate.

Plant operator

Surface well test engineer

I 'am a highly skilled Sr. Lead Operator, with a strong English language, highly motivated, always exceed my employers expectation, hold a 2 years Oil & Gas Handling diploma, various computer skills " SAP, Lotus, Excel, Access, Word, Process Net a semi HMI Building Progam.

Progressive EMS Paramedic Exp.

I have earned 20+ certifications and growing. Is attached to my resume.

Structural Designer With 9Yrs. PDS,Microstation & Autocad Experience

Work Experience: I have extensive experience in the repair, maintain and rebuild work with the following list of engines, etc. Wartisila (Varsa 32) Ulstein Bergen, (KVG12) Caterpillar, (D379, D398, D399, D3408, D333) Detroit Diesel, (in line 3-71,6-71,V-12) Lister, (2-3-4 Cyl.) EMD, (645s) Cummins

More than 25 years experience in electrical field.

Meticulous finance professional, current Controller of Mining Operations with twenty-two continuous years of challenging professional experience in the areas of audit, banking, accounting, cost control, budget, financial management and controllership. Hands-on executive.

I am a Piping Engineer experienced in Piping Stress analysis, Complete Piping engineering activities, PDS expertise. I believe that my enclosed resume will demonstrate that I have the characteristics and experience you seek.

Over 14 yr of experience in dealing with Automation, Instrumentation & control systems. 11 years in Project Sales. Working experience with Honeywell & Yokogawa. Presently, located at Doha, Qatar, working with Automation/IT Company.Handling DCS, PLC, FGD System,Field Instruments.

An Electrical Engineer with over 12 years of hands-on experience in Maintenance of Assets and Utilities in a Gas based Petrochemical plant and Integrated Steel Plant with Rich Managerial and technical capabilities in Installation/Commissioning and Upkeep of Electrical Equipments.

AWS, CSWIP 3.1 AND ASNT LEVEL II IN RT,UT,MPI & DPI

Pipe stress engineer with eight years experience.Software Caesar II.

8 + years Oil & Gas field experience in Instrumentation and Control engineering. Lastly Worked as Assistant Resident Engineer for Tyco Fire & Security, UAE

11years experience in the field Mechanical Maintenance of Machine shop and Foundry

Gas turbine, Boiler, Water treatment, Oil and gas operator

To operate shutting down / starting-up the processing plant assigned to an Offshore / Onshore platform for collection, treatment & inward transmission to consumers of oil & gas. To mix chemicals, prepare the plant for routine / planned maintenance and carry out first line maintenance.

Condition monitoring Engineer with 7 years experience in oil and gas industry

I have been involved with many projects throughout these regions, from Heavy Construction, Platform Installation and Inspection IRM programs.Also I have more than 3 years experience in NDT/Welding Inspector in various project. I just recently pass my Subsea Insp. Controller CSWIP 3.4U(TWI-UK).

Piping, mechanical, stress analysis, nuclear

I have done Master from M.Sc. Chemistry. I worked in Shell Pakistan Ltd. as a Q.C.Analyst.

KNPC & KOC approved planning engineer for EPC projects,Involved in Planning and coordination for the KNPC GRTA- 2006 shutdownInvolved in Planning of Major Shutdown for KOC -GC 27

An experienced metocean engineer/hydrographic surveyor/GIS technician/coastal engineer seeking suitable positions in related fields

Welding and NDT Supervisor, Lifting Equipment Inspector

Subsea Pipeline & Riser Installation engineering with Offpipe or Orcina Software(Orca Lay, Orca Flex

Computer :

My expertise includes strong hands-on technical skills with ECLIPSE and MBAL software applications. I am highly skilled in EOS fluid characterization, well test analysis, reservoir modelling, manage mature reservoirs, well monitoring

First Prev 51 52 53 54 55 56 57 58 59 60 [ 61 ] 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out