Resume - My skills are Electrical, Hydraulics and Pneumatics.

Misco Jobs

Resume #70265

CONTACT INFORMATION:
View contact information...

PROFESSION: Field Controls Service Representative.

DATE OF BIRTH: April 6th, 1968

NATIONALITY: American

MARITAL STATUS: Married

APPRENTICESHIP: None

TIME IN INDUSTRY: 12 years

START DATE: March 9, 2006

EXPERIENCE: 2006 – To Present
Vetco Gray Controls Inc.
Field Controls Service Representative

Exxon Erha, Nigeria
Flushing and pressure testing of Umbilical and Jumpers.
Operation of THRT and CSM umbilical reels.
Operating the Hydraulic Power Unit (HPU)
Maintenance on all Vetco control systems equipment
ERHA 20-P01 Completion onboard the Saipem Scarabeo 7 rig (SV-100110 and SV 100112)
ERHA 21-P04 Completion onboard the Saipem Scarabeo 7 rig (SV- 100176 & 100177)
Field Lead Controls Service Representative
ERHA 26-P43C Completion onboard the Saipem Scarabeo 7 rig (SV- 100178)
De-mob all Vetco equipment from the Saipem Scarabeo 7 rig.

BP NEXEN ASPEN Project (Gulf of Mexico, USA)
Field Lead Controls Service Representative
Completions and Tree Installation – Well AA5, NEXEN, ASPEN II. (SV 100180)
Completions and Tree Installation- Well AA5, NEXEN, ASPEN II (SV-100181)
Vetco Gray, SIT Area, Bridge of Don, Aberdeen, Scotland
Field Lead Controls Service Representative
Performed SIT on IWOCS Equipment for KIZOMBA-C Project (SV-100182)
Chevron Texaco - VK-900 Platform (Gulf of Mexico, USA)
Field Lead Controls Service Representative
Performed Electrical Analysis of MCS and Electrical Troubleshooting of HPU (SV-100183)
Newfield - Wrigley field (Gulf of Mexico, USA)
Field Lead Controls Service Representative
Installed HFL and EFL's for UTA to Tree and Sand detector to Tree (SV-100184)
ExxonMobil – UTA Site Received Test (Angoflex Compound, Lobito, Angola, West Africa)
Field Lead Controls Service Representative
Performed Electrical System Continuity Checks, Insulation Resistance Checks and Hydraulic pressure testing on UTA DC-1, UTA DC-2 and UTA DC-3 for Kizomba-C project (SV-100185)
ExxonMobil – IWOCS Site Received Test (Vetco Compound, Luanda, Angola, West Africa)
Field Lead Controls Service Representative
Performed Site Received Test on IWOCS Equipment for Kizomba-C project (SV-100185)
BP NEXEN ASPEN Project (Gulf of Mexico, USA)
Field Lead Controls Service Representative
Upgrading software for Downhole gauges (SV-100186)
BP Pompano – VK 989 BP Pompano Platform (Gulf of Mexico, USA)
Field Lead Controls Service Representative)
Troubleshooting the Surface Modem Unit, Troubleshooting the MCS, Removal and Installation of the Surface Modem Unit, Troubleshooting the Online Selector Unit, Diagnostic and Communication analysis testing, (SV-100187)
Newfield – MC194 Shell Cognac Platform – Troubleshooting (Gulf of Mexico, USA)
Field Lead Controls Service Representative
Troubleshooting the communications between the Master Control Station and the Hydraulic Power Unit.
Troubleshooting the Siemens S7-200 Programmable Logic Controller
Electrical Troubleshooting at the Hydraulic Power Unit Electrical Control Panel (SV-100188)
Newfield – MC194 Shell Cognac Platform – Troubleshooting (Gulf of Mexico, USA)
Field Lead Controls Service Representative
Troubleshooting the communications between the Master Control Station and the Subsea Control Module.
Troubleshooting the Discrete Output signals from the Master Control Station to the Shell MCC building. (SV-100189)
ExxonMobil – Kizomba-C UTA Site Received Test (Aker Kvaerner Yard, Moss, Norway)
Field Lead Controls Service Representative
Performed Electrical System Continuity Checks, Insulation Resistance Checks and Hydraulic pressure testing on UTA SAXI DC-1, UTA SAXI DC-2 and UTA BATUQUE DC-1 for Kizomba-C project (SV-100190)

ExxonMobil – Testing Hydraulic Flying Lead's in Luanda and EFAT on Kizomba-C Mondo Manifolds in Lobito, Angola, West Africa.
Field Lead Controls Service Representative
Performed Hydraulic Pressure testing on Hydraulic Flying leads at the Vetco Yard in Luanda.
Performed Electrical testing on Subsea Control Modules and performed EFAT testing on Mondo Manifolds – DC-1 PM 4, DC-2 PM-4, WAG-2, WAG-3, DC-3 PM-6
Installed Hydraulic Flying Leads and Electrical Flying leads for X'mas trees, Manifolds, UTA, SDU,
Installed Software for Subsea Control Modules and performed SRT on All Subsea control modules for Saxi-Batuque phase, Kizomba-C Project.

FMC Technologies Inc. (Houston, Texas. USA)
July 2000~Feb.2006
Field Lead Controls Service Representative
FMC Equipment Pressure testing
-Kerr McGee –Completion and workover onboard the Ocean Lexington rig, Gulf of Mexico
-New Field – Completion onboard the Ocean Voyager rig, Gulf of Mexico
-Installation of Hydraulic Flying Leads (UTA-XT-TH) for Anadarko on the Uncle John rig, Gulf of Mexico.
-Installation and commissioning of the CROSBY Master Control Station on the Shell Ursa Platform, Gulf of Mexico.

FMC Subsea Services Inc.(Malabo,Equatorial Guinea,West Africa)
Field Lead Controls Service Representative
Involved in the ExxonMobil MEGI project - Completions, Workovers, Production Operations,
ExxonMobil MEGI Projects: Phase 1, Phase 2, Phase 2B, Ekanga Notch, Southern Expansion Area (SEA).
Production and Water Injection type X-Trees.
* Field Lead Controls Service Representative on the Aleutian Key rig in Equatorial Guinea, West Africa
* Install, test and operate topside and subsea controls equipment for subsea completions and workovers.
* Troubleshoot Hydraulic Power Units, Workover Umbilical and Utility Umbilical Reels
* Operate topside controls ETU ver. 6.1 or SETE software to function tree valves via Subsea Control Module(SCM).
* Perform FMC Equipment Pressure testing and operation.
* Involved in the PL-01 and PL-02 flowline Wax Plug removal project.
* Install, test and operate Subsea Control Modules.
* Replace Subsea Control Modules from Supply boat.
* Test, Install and recover Hydraulic Flying Leads.
* Test, Install and recover Electrical Flying Leads.
* Installed Manifolds ZS-1A & ZS-1B.
* Maintain and service KOS controls equipment in the FMC K5 Warehouse, Zafiro Producer FPSO and Aleutian Key rig.
* Production Project for Subsea Leak Inspections and Gas Lift Choke operations.
* Plug and Abandonment (P&A) operations.

FMC CBV Brazil (Rio de Janeiro, Brazil, South America)
Field Lead Controls Service Representative
* Involved in the set-up and performance of the Factory Acceptance Test (FAT) for British Gas Dolphin Deep and Hibiscus projects.

FMC Subsea Services Inc. (Trinidad and Tobago, West Indies)
Field Lead Controls Service Representative
* Involved in the set-up and performance of the Site Receival Test (SRT) for British Gas Dolphin Deep and Hibiscus projects.
* Designed training program for downloading the Schlumberger downhole gauge co-efficients.
* Involved in the Topsides pre-commissioning operations on the Dolphin Deep Platform
- Production Hydraulic Power Unit
- Master Control Station
- Operator Work Stations
- Uninterrupted Power Supply Unit
- Topsides Umbilical Termination Assembly
- Wrote procedure for testing the tubing from HPU to TUTA and TUTA to SUTA.
- Involved in the Hector completion onboard the Sovereign Explorer rig.
- Involved in the Dusky completion onboard the Sovereign Explorer rig.

FMC Southeast Asia Pte. Ltd. (Singapore, Southeast Asia)
Dec 1997~ June 2000
Field Controls Service Representative
-Hands On-Job Training in the High Bay and Low Bay area – FMC Gate Valve Assembly, Refurbishing Drilling Tools for UWD Classic and UWD-15, Refurbishing Subsea tools and equipment, Pressure Testing FMC Christmas Trees and Tubing Hangers.
-Involved in the FAT/SIT – Shell Macaroni ( FMC Technologies Inc. USA)
-Involved in the FAT/SIT- Petronas Carigali – Malong & Sotong project (FMC, Malaysia)
-Involved in the FAT/ SIT- Conoco (Indonesia)
-Involved in Well A4 and Well A6 workover onboard the Nan Hai Thao Zhan rig for AMOCO Liuhua 11-1, China
-Involved in the CACT project (Chevron, Agip, CNOOC and Texaco)- FAT/SIT Phase 1 and Phase 2 in FMC Singapore
-Involved in the CACT HZ-32-5 and HZ-26 Subsea Development Project Completions, Workovers on the Nan Hai 2 rig, -Involved with production operations on Nan Hai Platform 26 (China)
- Operate, Maintain and troubleshoot the IWOC's HPU, Umbilical Reel
- Test fluid cleanliness
- Read hydraulic schematics
- Read subsea tree schematics
- Pressure test FMC Horizontal XT, tubing hangers, tree caps.
- Installation of FMC Horizontal XT, tubing hangers, tree caps.
-Involved in the Shell Angus Completion on the Ocean Worker rig (Gulf of Mexico, USA)
- Pressure test subsea tree, tubing hangers, tree caps.
- Installation of subsea tree, tubing hangers, tree caps.
Matsushita Compressor and Motor Sdn. Bhd.
Oct 1987~ Oct 1997
Positions Held:-
Production Operator
-Operation of Panasonic Industrial Spot Welding Machines.
Machine Keeper
-Maintenance, repair and improvement of all the Blower Motor manufacturing equipment and machinery
Production Engineering Technician
In charge of the manufacturing productivity improvement group.
-In charge of the Machine Keeper groups for the Fan Motor department, Blower Motor department, Toroidal Motor department, DC Brushless Motor department and Motor Component Parts department
Production Engineering Dept Supervisor
-In charge of the manufacturing productivity improvement group.
-In charge of the Machine Keeper groups for the Fan Motor department, Blower Motor department, Toroidal Motor department, DC Brushless Motor department and Motor Component Parts department
-Supervised and led the Machine Maintenance technicians group.
-Management and control of department budget.
-In charge of parts ordering and negotiations with vendors and suppliers.
-Warehouse and inventory control.
-Negotiations, Inspection and final approval for local/foreign made manufacturing machines.
-Sourced and provided industrial training for Maintenance service technicians.
-Team Leader for Total Productive Maintenance.
-Organized Man- Machine Productivity improvements projects. Improvements on plant machinery in order to achieve higher production targets.
-Wrote department procedures and guidelines for ISO 9002 and ISO 14000.
-Organized and implemented the Japanese 5S activity.
-Involved in overall company safety audit.

EDUCATION
* Degree (BSc) Electrical Engineering from Almeda University - 2005
* Diploma (First Class) in Electrical and Electronics Engineering from Institute Technology Jaya (ITJ), Kuala Lumpur, Malaysia (1994 ~1996)
* Malaysian Government Certificate of Education / Sijil Pelajaran Malaysia from La Salle Secondary School, Petaling Jaya, Selangor, Malaysia 1985
*

CERTIFICATIONS / TRAINING
* Certificate in Air Conditioning and Refrigeration from Negri Agro Industrial Training Complex (NAITC) Kuala Pilah, Negri Sembilan, Malaysia (Jan 1986 ~ Dec 1986)
* Certificate in Fundamental Pneumatics Training – Hydro-Pneumatic Technical Centre, Singapore (1989)
* Production Engineering Training – Takefu Matsushita Electric Co., Japan (1991)
* Certificate in Basic Hydraulics Systems Training – Grandflo Hydraulic Industries, Malaysia (1995)
* Certificate in Program Logic Controls Training- Omron Electronics Industries, Malaysia (1995)
* Certificate in Industrial lubrication training – Castrol Industries - Malaysia (1995)
* Certificate in Total Productive Maintenance – Asia Pacific Research Centre, Malaysia (1996)
* Certificate in Microsoft Excel basic/ intermediate – MCSB Group of Companies, Malaysia (1996)
* Self Study Courses – Offshore Safety Orientation, Introduction to Rotary Drilling, Routine Drilling Operations – FMC South East Asia Pte. Ltd, Singapore (1997)
* Certificate in HUET Water Survival Training – ALERT, Singapore (1998)
* On-Job-Training on Subsea Workovers – Liuhua Project AMOCO, Guangzhou, China (1998)
* Certificate in Forklift Training – Forklift Training Services, Texas, USA (2000)
* Certificate in FMC Service Skills Training- FMC Technologies Inc. Houston, USA (2000)
* HASKEL Hydraulic Pump Training – FMC Technologies Inc. Houston, Texas, USA (2001)
* Certificate in HUET Water Survival Training – Texas A&M University Systems, Texas, USA (2001)
* Certificate in HUET Water Survival Training – Total Safety Incorporated, Texas, USA (2003)
* Certificate in HUET Water Survival Training – McMillan Offshore Survival Training (2005)
* Offshore Safety and Construction Awareness Workshop for the Dolphin Deep Platform – 6th June 2005 – Total Safety Management, Trinidad and Tobago
* Attended Vetco Software upgrade training for Chevron Texaco Rigel/17Hands project in Nailsea, United Kingdom (2007)
* Certificate in Basic Offshore Safety Induction and Emergency Training (Including HUET & EBS) – O.P.I.T.O Approved. (2007)

Professional Membership
* Member of the American Society for Mechanical Engineers (ASME)

Awards Conferred:
* Matsushita Individual Award for outstanding performance
* Matsushita Managing Director's Award for the DC Brushless project
* Matsushita 5 Year Service Award
* FMC Certificate of appreciation for the British Gas project in Trinidad.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2451 to 2500 of 10179)

Go to Search Parameters...

Brief Description

Instrumentation & Control Systems Engineer: Honeywell TPS and ABB Infi-90 Open DCS(Distributed Control Systems), Triconex and ICS Triplex TMR PLC(Programmable Logic Controller) and Process Control Instrumentation.

Project handling and management as piping engineer

HSE / SAFETY SPECIALIST

Structural engineering, Specialised design engineer in oil & gas, industrial, commercial & residential structures, Holds a Postgraduate Degree in Civil Engineering with Specialisation on Structural Engineering

My skills are Electrical, Hydraulics and Pneumatics.

i am a geologist with 9 years experince, i have an experice with some geological softwares like Gravitas, powerlog, winlog, CPS3, stratlog and OFM, i did a supervision for mulogging, wireline and LWD jobs,

Reservoir Engineering/Simulation, Software development, Problem Resolution, Customer Service

CSWIP 3.1 Welding Inspector & International Welding Engineer

Worked for a leading group of manufacturing companies in kuwait as store incharge, imports purchase officer, iso 9001 internal auditor for differenct periods of time. Presently working as Quality Inspector in Inward section for ADGAS LNG manufacturing company in offshore Abu Dhabi

Procurement of All Electrical & Instrumentation Items

22 years of overall experience in Oil & Gas Industry in Operations, Project Management, Subsea Works, Facility Engineering, etc.

Over 10 years of experience in the field of Inspection/Corrosion/Quality and Welding in Indian Oil Corporation Limited (Haldia Refinery); currently serving as Deputy Manager, Inspection Department at Haldia Refinery, IOCL

6 years as process operator, 5 years as chemist. 1 year as comissioning technician,formation in DCS (distributed control system)Yokogawa

good experience in mechanical oil and gas equipement

Machanical engineer as 14 years exprience in manufacturing of cathodic protection anodes ,design and manufacturing of electrochlorinators and special metal fabrication

9 and half Years of working experience in Petrochemical Refinery and Oil & Gas Production / Processing Plant's Instrumentation field (Reliance petroleum Ltd. India, Petroleum Development Oman (Shell-Oman govt joint organization), and Ras Gas-Qatar) as Maintenance Foreman/Technician-Analyzers.

8+ years of work experience in Project controls, planning and cost engineering in the Owner/operator as well as EPC role with the most recent being with Colt Worley Parsons Eng. Earlier to that I have another 7 years of experience in Electrical engineering design discipline with Stork Comprimo .

Chemical Engineer with 10 years experience working with Reliance Industries Ltd

Skills -operator rotary, derikk,mecanic pump hidraulic fluid,electrical -electronic

„X Expertise in oil & gas/petrochemical, onshore piping and offshore top side piping.

A highly qualified and skilled Reservoir Engineer with over 7+ years of Domestic and International experience for the long-term management, development and optimization of large, mature fields and associated satellites.Expertise in Production/Petroleum and Reservoir Engineering particularly (expe

Extensive Work Experience

Fully qualified landman with 27 years of experience, in all aspects of the industry

Over 10 years of experience in the field of Industrial Automation covering Conceptual Design, Detailed Design, Software coding and other Engineering services as applicable to Oil & Gas (onshore & offshore) projects and Utility projects.

34 Years of Inland and Offshore Inspection and Project Co-Odination

Fourteen years experience in E&P oil industry. Good knowledge in drilling and production engineering. Extensive experience in well engineering operations in Completion, clean-up, DST, Stimulation, Coil-tubing, Logging, Well survey etc. Good skill in planning, organizing, communicating, interpersonal

An experienced Offshore Procurement Lead

14+ years of experiance in Engineering,Design Engineering specialising in Instrumentation field.

Process Instrument & Control and Analytical Insrument Specialist

I have over 20 years experience in all aspects of electrical work i.e. construction, testing and inspection and commissioning at home and abroad, both onshore and offshore.

Thorough technical/commercial knowledge and long experience on design, fabrication and sale of process equipment for oil/gas and energy industries

Innovative and motivated Electrical and Electronics Engineer with 15 years lead experience in Commissioning, Operations of Combined Cycle Gas Power Plants and Thermal Power Plants and Maintenance of Combined Cycle Gas Power Plants and Thermal Power Plants Control & Instrumentation and Electrical S

I am a Certified PeopleSoft Technology Consultant and a Certified PeopleSoft Installer and have worked as a PeopleSoft Systems Administrator for 7 years. I have implemented/upgraded Student Admin, Portal, HRMS and Fin. PeopleSoft systems on various platforms and can implement on any platform.

INSTRUMENTATION & CONTROLS ENGINEER with proven leadership skills, vast experience in the petrochemical and oil & gas industry. Worked for Technip, Tractebel, PDIL, GS E&C in india and aboard.

working as intrument and control technician in Total oil and gas platform Abu dhabi . Involved mainly in Trouble shooting and commissioning activities.

Free! Wellsite - Operations Geologist: Over 25 years experience ( Canada/North Africa) ; Offshore / Onshore Operations; Exploration / Development Drilling; Directional / Horizonital Wells/Geosteering;Supervision of Personnel/ Contractors; OJT of Local nationals:

A competent and qualified Mechanical Engineer with over 20 years experience in functional areas of Project Management, Strategic Management, Mechanical Maintenance, Process Engineering, refurbishment, as well as other allied operations. Presently associated with Saudi Arabia Basic Industries Corpora

M.sc in Applied Geology with M. Tech In Petroleum Exploration and working with one of the most successful exploration company in India.

Thirteen years of experience in the field of project management, feasibility Studies, front end engineering, conceptual design, Project proposals, detail design, flexibility Analysis, procurement assistance in piping/pipeline design.

Process Engineer in Oil & Gas Consultancy.

Area of Interest AVO/AVA, Inversion, Reservoir characterisation using Pattern Recognition and Spectral Decomposition and Attenuation.

Completion and workover engineer (11.5 years experience)

Experience in field development plan, identification of workover requirements, well completion, acquisition of subsurface data, optimization of well performance and project management,

Contract Oil & Gas Technical Writer Twenty years of progressive responsibilities in oil and gas industry.

Mapping, exploration, aerial primary data acquisition.

Police Officer ,Hostage negotiator, Field training officer, Investigation officer,MS Office,Communication skills

Piping Designer with 8 years experience in Oil & Gas Engineering and Construction. Have knowledge about Working Specification, Procedure, and International Codes. And also understand about Structural, Instrumentation, NDE and Oil & Gas Process.

Can Handle any related Jobs such as Work Controller, Procurement Officer and Administration Assistant or Staff. More details mentioned on my Resume Body.

Management of geological work at rig, Detailed sample analysis including accurate porosity and permeability estimation; Petro physical QC; Geological Operational QC; Liaising with client Geologist, reporting and striplog submission, representing oil company at the Wellsite; Work in the W

9 years of experience in Corrosion Engineering Activities for Oil and Gas Producing Company.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 [ 50 ] Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out