Resume - TECHNICAL QUALIFICATIONS:

Misco Jobs

Resume #70285

CONTACT INFORMATION:
View contact information...

OBJECTIVE:

To offer my best qualifications and professional experiences in the field of CONSTRUCTION, PETRO CHEMICAL, OIL REFINERY, SHIPYARD/SHIP FABRICATION AND PLATFORM FABRICATION, in order to obtain a position of MECHNICAL FOREMAN wherein my personal capabilities and self-expertise will harness.

TECHNICAL QUALIFICATIONS:

„« 25 years and 7 months, working experience as Mechanical Supervisor, Quality Control Engineer, Mechanical Foreman, Piping Foreman, Mechanical Technician, Lead man Millwright, Lead man Piping, Lead man Erector /Rigger, Millwright and Erector/Rigger in Construction of Shipyard Offshore/Onshore, Petrochemical Plant, Oil Mill, Paper Mill, Steel Mill, Petroleum Oil Refinery, Power Plant Combined Cycle, Shutdown, Hospital and Conveying System. Power Plant, Gas Compression and Reinjection Facilities.

PROFESSIONAL EXPERIENCES:

Position: Millwright Foreman
Company: Bechtel International Incorporation Philippines
(I.S.D. Agency)
Country: Hassi Messaoud Algeria, Africa
Date: May 2, 2006 to March 17, 2008
(Work ¡V 7 days a week)
Project: Sonahess Gas Compression and Re injection facilities

Duties and Responsibility;

This Project has 5 areas;

1) Zotti ¡V camp Base main project
2) Elgassi ¡V 17 km from Zotti
3) Agreb West ¡V 22km from Zotti
4) Agreb #6 ¡V 17 km from Zotti
5) AR ¡V #2 ¡V 14 km from Zotti

1.) Zotti Area ¡V Main Project
„« In ¡V charge for chipping the foundation installation, centering, levelness plumb ness; grouting and preliminary alignment of mechanical equipment like;
a) Pumps ¡V Vertical, Horizontal, Injection, Centrifugal b) 8 Unit Compression ¡V 3 Unit Booster, 3 Unit gas lift, 2 Unit Miscible flood c) Vessel d) Drum ¡V Cold and Dry Drum e) Skid ¡V Dylotien, DBS, FFS, GAS filter, nitrogen f) 3 Unit of VFD (Variable frequency drive)

„« In ¡V charge for the 4 Unit gas turbine generators. Model MS ¡V 5001- 26.3 MW to assembly, modification, installation and alignment of;
a) Inlet Duct b) Exhaust Duct c) Blower d) Air Filter House e) Air Ventilation Duct f) Oil Vapor Separator g) CO2 cabinet and cylinder h) Fin Fan Cooler
„« Assign to mechanical commissioning and start - up
1) 4 Unit gas turbine generator
2) 8 Unit gas compression
3) Pumps
4) Fin fan Cooler
5) Air cooler generator
6) Brower
7) House filter
„« In ¡V charge for 4 Unit Gas turbine generator for oil flushing and punch lest for mechanical work.

2.) EL GASSI ¡V 17 km from Zotti

„« In ¡V charge for chipping the foundation, Installation, levelness, Centering, plumb ness and preliminary alignment like;
a) 5 Unit gas Compression b) Pumps c) Vessel d) Air Compressor e) Skid
„« In ¡V charge for punch lest and Oil preservation of mechanical work

3.) AGREB WEST ¡V 22km from Zotti
„« In ¡V charge for chipping the foundation, installation, preliminary alignment levelness and centering of mechanical equipment like ;
a) Pumps b) Vessel c) Air Compressor d) Skid e) 2.) In ¡V charge for oil preservation of mechanical equipment
„« In ¡V charge for punch lest and assign to mechanical commissioning

4.) AGREB # 6 ¡V 17 from Zotti
„« In ¡V charge for chipping the foundation, installation, centering, levelness plumb ness and preliminary alignment of mechanical equipment like;
a) Pumps b) Vessel c) Air compressor d) Shed e) Air cooler
„« 2.) In ¡V charge for oil preservation and punch lest of mechanical equipment
„« Preparation for Oil flushing, cleaning tank with inspection and Box ¡V Up of lube oil tank. Fill oil at lube oil tank.

5.) AR - #2 ¡V 14 km from Zotti
„« In ¡V charge for chipping foundation, installation, levelness, centering of mechanical equipment like;
a) Pump b) Shed c) Air cooler
„« Preparation for Oil flushing, Cleaning, Inspection, Box-up and fill oil at lube oil tank
„« In ¡V charge for mechanical punch lest.

Date: DEC. 03 2004 - Sept. 12, 2005:
Position: MECHANICAL TECHNICIAN
Company: AL YUSR TOWNSEND AND BUTTOM CO. LTD (AYTB)
Project: MECHANICAL SHUTDOWN (MAN POWER SUPPLY)
Place: Q.E.W.C. & QP OFFSHORE PLATFORM SHUTDOWN, Qatar
Scope Work: PLANT SHUTDOWN

Duties and Responsibilities:
„« Shut down work at Qatar Electricity and Water Corporation by Turbine/Compressor GT 41, GT 71, GT 7, GT 8, and GT 12.
„« Dismantling and Re-installation of all parts for over hauling of Turbine/Compressor inner and outer casing, Rotor of turbine and Compressor, Trust Bearing and Journal Bearing, Turbine and compressor blade for changing the new materials, Rotor blade cleaning, combustor basket and transition piece, stand rotor for dismantling all stage blade by inspection and cleaning.
„« Shutdown of Distiller No. 22 includes dismantling of Demister, cleaning inside the distiller with sandblasting of paint, dismantling of pump (2 Unit).
„« Shutdown Work at Qatar Petroleum PS2 Platform Offshore Project includes 50 unit of equipment for shutdown of spading open/blind, dismantling and re-installation of Dome, open and box-up of man hole, dismantling of old Malefic and changing new one, Dismantling and Re-installation of Demister for cleaning, Cleaning of inside vessel for inspection and box-up and Spading of riser open/blind and changing ring gasket.

Date: FEB 05 ¡V AUG 04. 2004
Position: PIPING FOREMAN
Company: HYUNDAI ENGINEERING AND CONSRUCTION CO. LTD
Project: AONE PROJECT, SOUTH PARS PHASE 4 & 5
Place: ASSALUYEH REPUBLIC OF IRAN
Scope Work: CONSTRUTION, PIPING PACKAGE AND FABRICATION OF SMALL BORE

Duties and Responsibilities:
„« In-charge for piping package at Area 113-1 includes punch list of pipe line about 275 packages and walk down and re-walk down of package.
„« In-charge for fabrication and installation of 6,900 dia. inch small bore at area 107-2.
„« In-charge for piping package at area 107-2.

Date: SEPT 2000 ¡V OCT 2003
Position: MECHANICAL FOREMAN
Company: AL YUSR TOWNSEND AND BOTTUM CO., LTD (AYTB)
Project: SAMSUNG SAUDI ARABIA SPC PDH/PP PROJECT
Place: Jubail Industrial City
Scope of Work: MECHANICAL WORKS (ROTATING & STATIC EQUIPMENT)

Duties and Responsibilities:
„« In-Charge for Rotating Equipments like pumps, compressor, generator, LP/HP compressor and gas turbine.
„« In-charge for padding making, installation of equipments, levelness and center alignment of fin fan ("A" frame) 38 Unit and fin fan (Moore fan LLC) 14 Units for assembly installation roundness, centering and levelness alignment.
„« In-charge for static equipment like columns, vessel, and exchanger drum, cold box and filter for padding making, centering, installation and plumb ness alignment.

Date: DEC. 2002 ¡V JUL. 2002
Position: MILL WRIGHT FOREMAN
Company: NIPPON EXPRESS SINGAPORE PTE.LTD.
Project: SERAYA ISLAND PROJECT 2
Place: JURONG ISLAND, SINGAPORE
Scope of Work: MECHNICAL WORKS (ROTATING, INTERNAL WORK & PRE-COMMISSIONING)

Duties and Responsibilities:
„« In-charge for rotating equipments like pumps, compressor, generator, LP/HP compressor gas turbine by chipping of foundation padding, levelness, formwork making, and grouting.
„« In-charge for equipment internal work for flexi Pac loading, installation, levelness and alignment of gravity distributor trays, vane collectors and support grids.
„« In-charge for installation of pumps, motors, package equipments, compressor and gas turbine.
„« Lead a group of millwright for preliminary alignment and final alignment and motor solo test run.
„« In-charge for Mechanical pre-commissioning works.

Date: OCT. 2000 ¡V DEC. 2000
Position: MILL WRIGHT FOREMAN
Company: NIPPON EXPRESS SINGAPORE PTE. LTD.
Project: S.M.A.G. SHUTDOWN
Place: JURONG ISLAND, SINGAPORE
Scope of Work: SHUTDOWN WORKS

Duties and Responsibilities:
„« In-charge in shutdown and maintenance includes dismantling, alignment and overhauling of pumps.
„« In-charge for dismantling, fabrication and installation of small bore steam line.
„« In-charge for oil preservation of all mechanical equipments.

PERSONAL BACKGROUND:

„« Nationality: Filipino

„« Sex: Male

„« Date of Birth: April 28, 1954

„« Place of Birth: Alabat Quezon, Philippines

„« Civil Status: Married

„« Spouse: Perlina Rodriguez Martinez

„« Religion: Christian

„« Height: 155 cm.

„« Weight: 72 kgs.

„« Language Spoken: Pilipino, English

„« Pass port No.: KK 186456

„« SSS No.: 03-3742307-5

„« Res. Cert. No.: 20488119 Las Pinas, March 25 2008

EDUCATIONAL BACKGROUND:

Course School Year Graduated

Primary Alabat Elem. School 1961-1967
(Alabat, Quezon, Philippines)

Secondary ALABAT Municipal High School 1967-1973
(Alabat, Quezon, Philippines)

SUMMARY OF EMPLOYMENT RECORD OF
MR. RICARDO J. MARTINEZ
Duration Yr. Start Yr. End Company Project Country Position
1 Year, 10 Months May 2006 March 17, 2008 Bechtel International, Inc. SONAHESS Project Algeria Mechanical Foreman
8 Mo. Dec. 2004 Aug.2005 AYTB CO. LTD, QATAR QEWC/QP PS 2 QATAR MECH'L. TECH.
6 Mo. Feb. 2004 Aug. 2004 HYUNDAI ENG'G & CO. SOUTH PARS PHASE 4&5 IRAN PIPING FOREMAN
1Yr & 1Mo. Sept. 2002 Oct. 2003 AYTB CO. LTD, JUBAIL POLYPROPELENE KSA, JUBAIL MECH'L FOREMAN
3Yrs & 1 Mo. Jun-99 Jul-02 NIPPON EXPRESS PTE LTD SERAYA 2/SMAG & EXON SINGAPORE MECH'L FOREMAN
6 Mo. Oct. 1998 Apr. 1999 NEPTUNA SHIPYARD INC. SHIP FABRICATION PHILIPPINES MECH'L SUPV.
6 Mo. Feb. 1998 Aug. 1998 JURONG ENG'G INC. PM2 UPPC PHILIPPINES QC ENGR.
8 Mo. May-97 Jan. 1992 SAMSUNG ENG'G & CONST. LTD FORMOSA PLASTIC TAIWAN MECH'L FOREMAN
1 Yr. Mar-96 Mar-97 NIPPON EXPRESS PTE LTD SERAYA 1 SINGAPORE MECH'L FOREMAN
1 Yr. Jul-93 Jun-94 SHAPADU ENERGY ENG'G SDN BHD OFFSHORE MECH'L HOOK-UP/COM MALAYSIA MILLWRIGHT
9 Mo. Jul-92 Apr-93 JIMSBURG SERVICES SDN BHD PERWAJA STEEL SDN BHD MALAYSIA MILLWRIGHT
6 Mo. Jan. 1992 Jul-92 HYUNDAI ENG'G & CO. SMDS SHELL MALAYSIA MILLWRIGHT
6 Yrs. & 3 Mo. May-85 Aug. 1991 AG&P/BOUYGUES OFFSHORE PLATFORM FAB. OFF/ONSHORE CONGO ANGOLA LM PIPING/MECH'L
2 Yrs. Apr. 1983 Apr. 1985 AG&P KNPC PROJECT KUWAIT LM ERECTOR/RIGGER
1 Yr. Feb. 1982 Feb. 1983 AG&P LPG REFINERY PLANT IRAQ ERECTOR/RIGGER
6 Mo. Jul-81 Jan. 1982 AG&P PNOC/SHIPYARD PLATFORM FAB. PHILIPPINES MECH'L FM
2 Yrs.& 2 Mo. May-79 Jul-81 CICG ATLAS MINING/LUNG CENTER PHILIPPINES LM /MILLWRIGHT
1 Yr. 9 Mo. Jun-77 Mar. 1979 AG&P PHILAGRO/PSC PHILIPPINES MILLWRIGHT

SUMMARY OF EMPLOYMENT RECORD
PROJECTS COUNTRY YEAR MONTHS

1.) SHIPYARD, OFFSHORE, ONSHORE
FABRICATE OF FLAT FORM JACKETS & DECK

a.) Offshore & Onshore AFRICA CONGO 6 3
b.) Fabricate of Ship on shore PHILIPPINES 6
c.) Hook - Up & Commissioning Flat Form Offshore MALAYSIA 1 0
d.) Fabricate of Flat form Deck on Shore PHILIPPINES 3
TOTAL - 8 0

2.) PETROCHEMICAL PLANTS

a.) South Pars Phase 4&5 IRAN 1 6
b.) Saudi Polyolefin Company (SPC) Project JUBAIL K.S.A. 1 1
c.) Seraya Island Project II Shell SINGAPORE 1 4
d.) Singapore Olefin Project Exxon SINGAPORE 1 6
e.) Seraya Island Project I Shell SINGAPORE 1 0
F.) Shell M.D.S. Project MALAYSIA 0 6
g.) Formosa Plastic Corporation TAIWAN 0 8
TOTAL 6 7

3.) MINING / OIL MILL / STEEL PLANT / PAPER MILL

a.) Paper Mill UPPC Project PM2 PHILIPPINES 0 6
b.) Perwaja Steel Plant MALAYSIA 0 9
c.) P.N.O.C PHILIPPINES 0 3
d.) Atlas Gold Mining PHILIPPINES 1 2
e.) Philargo Oil Mill PHILIPPINES 0 9
f.) P.S.C Project Mining PHILIPPINES 1 0
TATAL 4 5
4.) REFINARY
a.) KNPC Project KUWAIT 2 0
b.) L.P.G. Project IRAQ 1 0
TOTAL 3 0
5.HOSPITAL
a.) Lung center PHILIPPINES 1 0
TOTAL 1 0
6.) SHUT DOWN
a.) Q.E.W.C Power Plant QATAR 0 5
b.) Q.P. PS2 Petrochemical QATAR 0 3
c.) S.M.A.G. Petrochemical SINGAPORE 0 3
TOTAL 11
7.) Construction a.) Power plant installation commissioning start-up 4 unit ALGERIA 1 4
b.) Compression and re-injection facility ALGERIA 6
TOTAL 25 7

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1851 to 1900 of 9906)

Go to Search Parameters...

Brief Description

Environmental, Health and Safety Specialist and Industrial Hygienist experienced and Certified by the Board of Certified Safety Professioals

Geoframe data loading (2d,3d, well data), Geoquest software support (Charisma, CPS, and Finder), Project management, Unix Environment.

3 Years Mechanical Engineering Course with First Class passed in 1987 from India.

Multiskilled instrument & control tech, experienced in oil & gas. Excellent computer skills with hands on experience in maximo system.

Piping Draftsman

1. DCS (Honeywell plantscape and SCADA rev320) and FSC (Honeywell Fail Safe Control)

I am an experienced exploration consultant, advisor, manager, educator and research scientist. I have extensive experience in exploration play, prospect and basin risk analysis and in designing exploration strategy and organizational structure

More than 20 years of professional engineering practice. Solid background in all aspects of building construction including design, inspection, fabrication, erection, estimating and detailing. Involved in major construction works like hospitals, office, commercial, industrial, petro-chem plants.

During successful career with Mobil Oil and Bechtel Corp, developed expertise in technical and management functions for stateside and offshore supply chain projects ranging from $150 million to $3.5 billion.

Iam an innovative, dedicative, initiative and dynamic HSE person. I have experience 15 years in HSE OIL and Gas Industry, especially in develop HSE Management System, Environmental Management System ISO 14001 and Contractor HSE Mnagement System.

Chartered Accountant with CISA and CIA having more than 15 years experiance

Reservoir Engineer 12 Yrs. experience. Strong technical Background - emphasis on simulation and modelling. Provided technology support within an E&P Co. Background in geophysics, geology, petrophysics. Professionally developed as a consultant. People oriented, Dynamic.

Looking for a petroleum engineer postion and will relocate.

I'm basically an Industrial Engineer graduated from the US.I have been able to build up a career in manufacturing at a senior position,Operations/Plant manager level.

Industrial Control & Automation Systems PLC programmer (Siemens, Schneider Electric) Repair and maintenance - electrical devices

Process Control design, analysis, and tuning, ESD logic design and analysis, Systems experience: Honeywell DCS, Triconex, Wonderware MMI, PI, and Mitsubishi Diasys Netamtion

Experienced Rig Safety Officer capable of performing Audits to verify compliance to company’s Policies and Procedures. Conduct SMS audits on Rigs to. Conducted Training sessions to rig personnel in Safety and Emergency Procedures. Cooperate with all disciplines to improve effectivness of the SMS.

DCS OPERATOR

After completing my Diploma in Mechanical engineering from India I joined Shipping as Engine Cadet on a Product Tanker. After completing one year cadet ship I went to UK in March 2000 for National Vocational Qualification course In Marine Engineering and down all advance survival courses from there.

Maintenance Engineer (rolling mills)

INSTRUMENT ENGINEER / SUPERVISOR

Free! M.Tech with 7 years of work experience in managing functional aspects of Static Equipments Design & Engineering. Expertise in planning, executing and spearheading projects involving Design Engineering and Resource Planning with a flair for adopting modern construction methodologies in compliance to

Mechanical supervisor / Technician with experience in permit coordination

Petroleum Engineer with expertise in pipeline inspection, MFL technology, corrosion diagnostics, pipeline integrity management and assessments, large-scale petroleum relational database design and interpretation, financial analysis, budget analysis, and project management.

Process / Systems / Operations

Drilling Superintendent - Senior Drilling Supervisor, International Positions Only

Electrical / Instrument Inspector

Objective: To share knowledge on Best Practices on Health, Safety and Environment (HSE) in the development and implementation of HSE Management System and promote a culture of Continuous Improvement.

I am a senior instruments engineer. I have 15 years experience in the design and specification of instrumentation for petrochemical plants. I was involved in developing P&IDs, specifications, data sheets, logic narratives, instrument indexes, systems diagrams and alarm summaries.

Bioinformatician and clinician

To obtain a challenging engineering position in an internationally active oil/service company. Education The University of Texas at Austin May 1993 Master of Science in Petroleum Engineering. Overall GPA 3.83/4.00

I have extensive experience in Production Operations in the oil and gas industry.

Experience in Exploration and Development Geology, having involved in exploration of new areas and Enhancing of Oil Recovery in the fields of Northern Potwar Deform Zone and Middle Indus Basin of Pakistan. Day to day duties include studying the current reservoir properties via interpretation of geop

Stage 3 crane operator 25 years experience oil / gas / subsea / construction

Experienced Engineer working as Test Engineer for latest released versions of DeltaV software applications. Flexible knowledge in hardware technologies like Fiedlbus and SIS.

Engineer- electrician. Electrical installation testingand setup electrician.

Oil and gas Utilities Senior Operator, start up, power plant shift enginner

diesel mechanic&fitter turner machinist with technical management skills. 28yrs exp. expat . job locatio no problem. brief off shore exp.

Hands of experience with good knowledge of engineering (standards) & trouble shootings working with one of the major such as SABIC projects (Yanbu national petrochemical company) with Technip JV Irem sPa, and other than working with Steel plant in one of the major company JINDAL group.

My name is Garry Jennings and I would like to introduce myself as a possible candidate for the fulltime Operations Technicians positions.

Sales, marketing & Applications Eng. for all ESP applications

I am an experienced Fire Protection personnel. My experience not only in hands-on fire protection activities but also in fire risk assessment, fire protection training and supervising of down line personnel, fire protection system auditing, safety at work issues auditing.

Metallurgical & Welding Engineer with experience in failure analysis, materials characterization, welding Technology, Microstructure-Property correlation, Research and Development, QA/QC, NDT, WPS, PQR Certification Project Quality Management System, Internal Quality Audit. Expert in engineering eva

I am experient with AutoCAD by new released and CAD worx to made 3D model of piping

Drilling Engineer

Calculated volumes, Maintained well, equipment and compressors, participated in well reviews, intered volumes in computer.

TECHNICAL QUALIFICATIONS:

Have worked and travelled all over the Pacific region, NZ and Australia. I have interacted and worked with a wide diversity of cultures. I am a very hard worker, I learn new skills quickly and am able to implement them accordingly. I wish to continue utilizing my skills as a Diesel Fitter,

Master Degree Of Science Major In (( Synthesis of cascaded refrigeration systems)), *PUBLICATION:F. Rabea, S. aly and M. awad," Fuzzy approach for cascade Refrigeration Synthesis ", HYDROCARBON PROCESSING March 2008.VOL.87 NO.3,** HYSYS PROCESS SIMULATOR , Word – Excel – Power pointInternet,windows*

My backgroung is in Mechanical Engineering but I have been working in Utilities Plant Operation since past 11++ years. My expertise in Steam Boiler and Steam System, Water Technology, and others related to utility plant.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 [ 38 ] 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out