Resume - HSE / SAFETY SPECIALIST

Misco Jobs

Resume #70442

CONTACT INFORMATION:
View contact information...

HSE (Health, Safety, & Environment) Advisor / Officer;
06 years experience.

UOBJECTU: Application.

I have the pleasure to send you my detailed CV in order to have HSE Engineer / Advisor, Safety Advisor / Officer or Process Engineer available in offshore or onshore platform.

UCIVIL STATE

- Family Situation: single
- Nationality: Algerian
- Date of birth: June 02 1974.
UDIPLOMS
* 1997-2000: USTO University of ORAN – ALGERIA

Bachelor in PROCESS ENGINEER: Chemical Engineer

* -1992-1996 IGMO University of ORAN - ALGERIA
DEUA in INDUSTRIAL CHEMISTRY

* 1992 Terminal Secondary in INDUSTRIAL CHEMISTRY technical lyceum GHARDAÏA – ALGERIA.

UOTHER CERTIFICATES

- Certificate in computer skills

Certificate in chemistry laboratory.

UPROFESSIONAL EXPERIENCE

* From 04/02/2008 at now Field Safety Trainer/ Safety Officer ADWOC Company - LIBYA.

* From 28/07/2007 to 03/02/2008 Safety Officer KCADeutag - Hassi Messaoud - ALGERIA.

* From 01/06/2004 to 26/07/2007: HSE / Environment engineer ENVIRONMENT
DIRECTION GHARDAIA –ALGERIA.

* - From 04/01/2003 to 25/05/2004: HSE / Environment engineer ENVIRONMENT
INSPECTION TAMANRASSET –ALGERIA

* - From 01/04/2002 to 31/12/2002: chemistry engineer ENVIRONMENT
INSPECTION GHARDAIA –ALGERIA

* - From 01/07/1996 to 15/09/1997 marketing manager INFOSYSTEM society;
GHARDAIA – ALGERIA

TRAININGS
- KCAD & BP's HSE crew induction
October 16 – 17, 2007 NAFTOGAZ – HASSI MESSAOUD- Algeria.

-.Safety Induction Training KCADEUTAG Hassi Messaoud – ALGERIA August 21-28, 2007;

- International workshop: desertification and sustainable development
June 01 – 02, 2006 W GHARDAIA.

- Seminar: solar energy; Project of AZAHAR February 07-08, 2004
W Tamanrasset.

- International conference Of the Backers for the Management of Municipal Waste. May 05 – 06, 2003, Palate of the Nations; Algiers.

- Engineer training: Process, Topping, Instrumentation and Safety Training from June 02, 2000 to October 15, 2000 Arzew's refinery –JGC – Algeria.

- Training from March 01PstP, 1996 to June 15, 1996: ENVIRONMENT
INSPECTION - GHARDAIA - ALGERIA: D.E.U.A's
Engineer Training in Physical-Chemical treatment.

UOTHER Skills
- Good Organizational skills.

- Perfect command of HSE management System.

- HSE and Cleanup's INSPECTOR within Industrial companies included Oil & Gas field.
- Long term know-how inspection, investigation and identification of potential hazards within Oil & Gas field and to provide tolerable technical feedbacks mentioned in HSE reports.

- Organisation of 02 technical meetings in environmental laws updating British Petroleum Company - Hassi R'mel - W Laghouat – Algeria. 2005-2006

- Broadcast about Practices of renewable energies Radio of GHARDAIA
- ALGERIA December 2006.

- Computer literate with excellent command over English, French & Arabic languages.

- HSE Installations Inspections & Audits activities & tasks: between 2002 & 2007;

- HSE inspections carried out: 103 inspections.
- Industrial Wastes inspections: 10 inspections.

- Water Quality inspector tasks between 2002 & 2007:

- First Aid certificate. Red Crescent GHARDAIA – ALGERIA; 2005.
- Car Driven Permit.

ULANGUAGES
- ARABIC: SPEAK READ WRITE.
- English: SPEAK READ WRITE.
- French: SPEAK READ WRITE.
- Dutch: INITIATION.
- Spanish: INITIATION.

UHOBBIES:U

- Oil & Gas HSE Engineer Trainings & Courses Details.

- Technical Reading of Oil /Gas International Safety and Environmental ISSUES reports.

- Maritime & Offshore Safety Courses:

- Computer (Software and Hardware), Media, & Internet.

- Sport, Travel & discover of new Cultures.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2401 to 2450 of 9901)

Go to Search Parameters...

Brief Description

Self motivated and experienced sales & marketing manager that always gets results

Over 30 year’s professional inspection experience in the petroleum refining, chemical process and electrical power generation industries. Extensive experience performing American Petroleum Institute 510 inspections on pressure vessels and American Welding Society Certified Welding Inspec

Quality Specialist experienced in Quality Management System, being aware of specific Inspection Techniques, including NDT Techniques and offering over 25 years experience in QA/QC environment acquired in Mettallurgy and Construction (Prestressed Concrete Cylinder Pipes and Oil&Gas Inst.)

30+ years petro=chemical/construction QA/QC experience

Integrity & RBI Inspection Engineer

I've been 18 years experience in Petrochemical and Oil&Gas and my position now is Operation Foreman for Petrodar Operating Company in Republic of Sudan in Oil & Gas company. My responsibilities are to manage the operation of crude oil production which is daily capacity 200,000bbl/day.

I am a B.Tech degree holder in Instrumentation passed out from Madras Institute Of Technology, Madras, India and I am having Sixteen years of experience in the field of Instrumentation in maintenance, construction, commissioning and design in petrochemical, refinery, power plants

IT specialist, professionally qualified in Management and Computers(M.B.A Information Systems, Masters degree in Computers, Bachelors degree in computers) with 9 years of proven hands-on technical and management experience.

Over 15 years of successful consultative sales experience in both the software application, enterprise level solution and service markets. Sales, sales management and business development positions held with a wide range of technology related and innovative solution based organizations.

MS in Civil and Mechanical Engineering, in Alaska, Russian and English language, experienced in Numerical Wave Modeling, Coastal Engineering, Hydrographic Survey, adaptable to changing projects and work schedules and have a proven ability to quickly train on different subjects.

•Engineering, Project Management, Construction Management, Cost Control & Sub-Contract Co-ordination •Oil & Gas, Petro-chem, Cross country Piping •Shutdowns/ Tie-ins •Equipment Installation/ maintenance and commissioning •Structural Fabn & Erecn •Manpower and Resources Planning

I have been working in the UAE since October 2001 as Mechanical Maintenance Supervisor/Commissioning Engineer in the Oil/Gas and Power Industry. Prior to that I held senior positions in the Military as Ship's Chief Engineer, Engine Room I/C, Instructor and In charge of training.

Myanmar/ Singapore PR, MSc in Manufacturing and BEngg in Electrical Power, Total 7 year experience in electrical power, able to do LV design, maintenance, service and commissioning for marine and offshore industry

Maintenance, verification and run in hole of Quarz electronic memory down hole gauges for data acquisition involving static pressure survey, Flowing gradient survey, flowing pressure survey, maximum efficiency rate survey, injectivity / fall off survey, interference test, build up test.

I am qualified mechanical/piping engineer, with extensive experience in pipe stress analysis, hands on experience both in design and field operation.

Oil and gas production operations Specialist with over fourteen years of onshore and offshore diversified and solid experience in many facets of production and oil storage and movements operations. My most recent experience was in the middle east

Project Management/ Project Superintendent- Electrical & Instrumentation abilities- Construction/ Mechanical Completion of Offshore Production Facilities. Commissioning assistance during construction phase. managing personnel up to 200 E & I field craft.

Electrical operation and maintenance

Experienced, geotechnical engineer / exploration geophysicist

HR Generalist possessing 5.5 years of exp in handling Recruitment,Performance Appraisal,Training & Development,Compensation and Benefits,Statutories for various industries like IT,Engineering & Manufacturing,Oil and Gas,Pipe Engineering Project.

I have passed through the whole production system, as production tehnologist and production supervisor

Level Five Ticketed Jouneyman Well Test Supervisor

Field service engineer for gas turbines and generators. Controls and electrical studies background. Working experience on several fields (construction, refinery, maitenance and operation)

Document controller with a total experience of more than 6 years. More than 3 years of experience in documentation using SAP EDMS in a Petrochemical company in Saudi Arabia.

Competent Project Controls specialist with Estimating, Claims Management and Risk Management skills. Experience spans 35 years in industries including Nuclear, Fossil and Hydroelectrioc power, Oil and Gas, Refinery and LNG plants. Multi-discipline estimating skills at all levels from FEL onwards.

Instrumentation & Control Systems Engineer: Honeywell TPS and ABB Infi-90 Open DCS(Distributed Control Systems), Triconex and ICS Triplex TMR PLC(Programmable Logic Controller) and Process Control Instrumentation.

Project handling and management as piping engineer

HSE / SAFETY SPECIALIST

Structural engineering, Specialised design engineer in oil & gas, industrial, commercial & residential structures, Holds a Postgraduate Degree in Civil Engineering with Specialisation on Structural Engineering

My skills are Electrical, Hydraulics and Pneumatics.

i am a geologist with 9 years experince, i have an experice with some geological softwares like Gravitas, powerlog, winlog, CPS3, stratlog and OFM, i did a supervision for mulogging, wireline and LWD jobs,

Reservoir Engineering/Simulation, Software development, Problem Resolution, Customer Service

CSWIP 3.1 Welding Inspector & International Welding Engineer

Worked for a leading group of manufacturing companies in kuwait as store incharge, imports purchase officer, iso 9001 internal auditor for differenct periods of time. Presently working as Quality Inspector in Inward section for ADGAS LNG manufacturing company in offshore Abu Dhabi

Procurement of All Electrical & Instrumentation Items

22 years of overall experience in Oil & Gas Industry in Operations, Project Management, Subsea Works, Facility Engineering, etc.

6 years as process operator, 5 years as chemist. 1 year as comissioning technician,formation in DCS (distributed control system)Yokogawa

good experience in mechanical oil and gas equipement

Machanical engineer as 14 years exprience in manufacturing of cathodic protection anodes ,design and manufacturing of electrochlorinators and special metal fabrication

9 and half Years of working experience in Petrochemical Refinery and Oil & Gas Production / Processing Plant's Instrumentation field (Reliance petroleum Ltd. India, Petroleum Development Oman (Shell-Oman govt joint organization), and Ras Gas-Qatar) as Maintenance Foreman/Technician-Analyzers.

8+ years of work experience in Project controls, planning and cost engineering in the Owner/operator as well as EPC role with the most recent being with Colt Worley Parsons Eng. Earlier to that I have another 7 years of experience in Electrical engineering design discipline with Stork Comprimo .

Chemical Engineer with 10 years experience working with Reliance Industries Ltd

Skills -operator rotary, derikk,mecanic pump hidraulic fluid,electrical -electronic

„X Expertise in oil & gas/petrochemical, onshore piping and offshore top side piping.

A highly qualified and skilled Reservoir Engineer with over 7+ years of Domestic and International experience for the long-term management, development and optimization of large, mature fields and associated satellites.Expertise in Production/Petroleum and Reservoir Engineering particularly (expe

Extensive Work Experience

Fully qualified landman with 27 years of experience, in all aspects of the industry

Over 10 years of experience in the field of Industrial Automation covering Conceptual Design, Detailed Design, Software coding and other Engineering services as applicable to Oil & Gas (onshore & offshore) projects and Utility projects.

34 Years of Inland and Offshore Inspection and Project Co-Odination

Fourteen years experience in E&P oil industry. Good knowledge in drilling and production engineering. Extensive experience in well engineering operations in Completion, clean-up, DST, Stimulation, Coil-tubing, Logging, Well survey etc. Good skill in planning, organizing, communicating, interpersonal

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 [ 49 ] 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out