Resume - Production & Process Operation of whole plant with the help of DCS (Experion PKS...

Misco Jobs

Resume #70581

CONTACT INFORMATION:
View contact information...

____________________________________________________________________________
Post Applied for: Offshore/Onshore Production operator/Panel Operator/Field Operator ____________________________________________________________________________

Objective:
Seeking for a good opportunity in good organization (Offshore/ Onshore Oil & Gas production operation, process facility / LNG plant) as Production/Process operator. I am Diploma holder in Petroleum Refinery & Petrochemical Engineering with 7.8 Years of experience in Oil & Gas Field as an Onshore Production operator & Offshore Lead Production operator.

Educational Qualification:

* Diploma in Petroleum Refinery and Petrochemical Engineering. From Government Polytechnic Ujjain Madhya Pradesh, India as a regular student with 65.49% Marks in 1997.
* High School from State Education Board Bhopal Madhya Pradesh, India with 72.23% of Marks in 1991.
* Higher Secondary in Science (PCM) from State Education Board Bhopal Madhya Pradesh, India with 55.56% of Marks in 1993.
* Pursuing B.Tech in Chemical Engg. ( 4th semester) from RVD University.

Working Experience:

COMPANY POSITION DURATION YEARS
NIKO Resources Ltd. (Hazira, Surat) India Offshore Lead Production Operator May 2004 -Till date
3.9

NIKO Resources Ltd. (Hazira, Surat) India Onshore Production cum Process Operator June 2000 to April 2004.
3.9

Responsibilities: (Offshore)
Production & Process Operation of whole plant with the help of DCS (Experion PKS R100) & supervise all other offshore activities, co-ordination of Slick line job, BHP survey & Work over in the wells, all types of maintenance jobs, Supply Vessels, Chopper Activity, Fire Fighting Team Leader & all hot & cold work Activity at Platform, Reporting To Operation Coordinator & General Manager at Onshore.

Nature of Job (Offshore)
Operation & Maintenance of
* Production Operation of natural gas & Crude oil.
* Well head (X-mas Tree), 3 Phase separators, High & low pressure Inlet stations.
* Operation of Hydraulic Well Head Control Panel.
* Coordination of wire line job.
* Supervise Pigging Operation Job.
* Operation & maintenance of water treatment plant
* 250 KVA gas & diesel generator.
* 375 KVA generator (Bi fuel System)
* Fire fighting pumps & equipment.
* Operation & maintenance of all Centrifugal & reciprocating pumps
* Operation of fuel gas scrubber & Fuel gas skid.
* Operation & maintenance of instrument air compressor and air utility system.
* Operation of fire & flame gas detection system.
* Operation & maintenance of water maker system.
* Operation of Diesel injection in oil wells.
* Operation of water injection in wells.
* Operation of 240 & 24-volt UPS & battery backup system.
* Trouble Shooting of Process System Shut down and Restart the DCS System.
* Operation of wellhead control panel. Shut down and start up procedure.
* Operation of flare system including flare K.O. Drum and flare ignition panel.
* Fire Fighting & Rescue operation Team Leader.
* Operation of Life Boat.

Pre commissioning & offshore plant startup: Involved pre commissioning & startup offshore plant & water injection treatment plant.

Responsibilities: (Onshore) Main Gas Gathering Station
Worked as a Panel Operator DCS (Plant Scape Server) Operator/Field Operator at Hazira Gas plant

* Production of Natural Gas.
* To supervise the well Testing Works. Well head operation & maintenance.
* Operation of whole plant with the help of DCS (Plant Scape Server).
* Gas Distribution to customers and daily Operation of three-phase Separator.
* Sample collection from each well and sent it to Laboratory for analysis.
* Operation of ETP and fire fighting system.
* Transfer and handling of Condensate & Crude Oil.
* To follow the safety procedure.
* Trouble shooting and attending any type of break down.
* Shut down maintenance work.
* Handling of Unit operation such as Separator scrubber etc.

Achievements:

Awarded 'Competent Operator' certificate with Honor after completing the on job Training conducted by NIKO Resources Limited.

Computer Literacy:
* Operating Software: Windows 98 & Windows NT.
* Application Software: MS Office, Excel.

Trainings undergone:
* PROFICIENCY IN LIFE RAFT AND RESCUE BOAT TRAINING conducted by
Training Ship Rahaman nahawa Mumbai India.
* Five days advance training program of DCS held at TATA AUTOMATION center of Tata Honeywell, Pune Maharastra (India)
* PERSONAL SURVIVAL TECHNIQUE, TRAINING conducted by Suraksha Marine
Institute Mumbai India.
* "FIRE & SAFETY MANAGEMENT TRAINING PROGRAM" Conducted by the Fire
& Safety Department of the ESSAR Steel Ltd Hazira Surat, India.
* Gas Processing, its distribution & marketing program trainings, conducted by Oil &
Natural Gas Corporation Ltd, Hazira Plant Surat. On 06/03/2003 to 08/03/2003.
* Three days advanced first aid training from St. John Ambulance Mumbai.
* Two days Effluent water treatment training from Envirocare Ltd Surat.
* Two days Helicopter Underwater Escape and Sea Survival Training Conducted by Naval Maritime Academy, Colaba, Mumbai.
* HUET Training Attended at Suraksha marine Mumbai.

Fire & Safety:
* Preparing Site Specific Procedure Isolation Sheet for Operational Activities in the Platform, Pre job Hazard Identification & Risk Analysis, Permit to Work Procedure.

* Familiar with Fire & Safety System, Fire Alarm System, Fire Fighting, Water Sprinkler
System, LEL Alarm System, Deluge Valve System, Gas, Smoke & Heat detection System, Fire
Monitors & Hydrants, Operation of Fire Extinguisher, Breathing Apparatus & PPE.

Personal Detail:
Date of Birth: 10 Jun 1976
Marital Status: Married
Nationality: Indian
Language Known: Hindi, English and Gujarati

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5001 to 5050 of 9785)

Go to Search Parameters...

Brief Description

AutoCAD, ProE, CATIA , Primavera ,DataStream 7i, MP2

Excellent English, excelent communication skill, great team player, great Marketing education background, fast learner, and highly motivated.

Preparing well program and well planning. Rig site night drilling supervisor.

experience and certified rigger and craneoperator has an experience in civil, mechanical, oil and gas industries

Production & Process Operation of whole plant with the help of DCS (Experion PKS R100) & supervise all other offshore activities, co-ordination of Slick line job, BHP survey & Work over in the wells, all types of maintenance jobs, Supply Vessels, Chopper Activity, Fire Fighting Team Leader & all hot

Certified International Project manager (By the AAPM)

HIGHLIGHTS: Geology, Oil sands, Heavy oil and bitumen recovery, Drilling, Well logging, Advanced Petroleum Technology; Methodical, efficient thought procces, positive and professional attitude, job task planning and organizing

I am a Diploma Mechanical Engineer having experience around 5 years as production operator.

My job objective is be involved in a challenging and creative position where I can apply my education in innovation and Further development of existing technology - as a petroleum engineer

Mechanical engineer having experience in piping design

Project engineering and management, business development, soviet design standards, Russian speaking, oil & gas, minerals and metals

Operate fractionation plant, lean oil extraction plant, refigeration plant, instumentation work, maintenance work.

BSc Geological Engineering

Safety Engineer / Rigging & Lifting Eng

Projecr /Construction manager

Seeking a job position in the field of Instrumentation, with challenging opportunities to further enhance and optimize leadership and technical capabilities and to contribute to the success of my employer in my fullest interest and potential

Chemical Engineer with 7 years of experience in Chloralkali Plant and Caustic Concentration Flaking/Prilling Unit

I am currently a final year M.Sc. Student in Electrical Engineering Department, King Fahd University of Petroleum and Minerals (KFUPM). My graduation is expected by May 2003 and I will be available by July 2003.

1.2 years of Experience as a Piping Engineer, 2 Year of Experience in PDS Modeling

I am a Controls and Instrumentation engineer from Pakistan. I have 3 year experience

Electrical Engineer

Application for the Post of Piping Designer .

Project Controller with extensive experience of implementation and operation of project management systems. Detailed knowledge of C/SCSC & EVM systems. Experience in Petro-Chem, Oil & Gas downstream distribution, Rail, Defence and Civil Engineering sectors. Extensive procurement experience.

LSIT, total 12 years of surveying

PIPING DESIGN STRESS ANALYSIS ENGINEER

Reservoir Engineer

I graduated from Bandung Institute of Technology (ITB) majoring Chemical Engineering on March 2004 with GPA 2,92. I have experiences as a chemical tanker chartering team and process engineer.

A senior manager with over 25 years experience in engineering management including sales and project engineering in the Middle East, North Africa & UK within the oil, gas, construction, power, petrochemical sectors with blue chip companies including Saudi Aramco, Shell UK and British Gas.

Thirteen years experience of Project Execution, Quality Assurance & Quality Control at OIL & GAS Industries at Saudi Aramco, QatarPetroleum,Parco Refineries, National Oil Refineries, PSO Plants, in Saudi Arabia ,Qatar & Pakistan involved with the FAT’s, Installation ,Testing and Commissioning of

Senior QA/QC Engineer (Welding, Inspection & NDT) / Construction Superintendent, with more than 12 years of experience in the field of Oil and Gas performed with multinational engineering companies

stat engineer (oil and gas exploration) , drilling rig move fishing

MSc GEOLOGY, RESEARCH WORK IN ELECTRICAL RESISTIVITY METHOD IN GEOPHYSICS FIELD

B.E.(Chemical), 6 years of experience in offhsore oil and gas platform of which 3 years in control room.

Over 9 years experience in Instrumentation & control in Chemical, Power, Cement, Sugar & Petrochemical industry

I have worked in Pre-Commissioning, Commissioning, Normal running Plants. In India and Abroad, both places I have worked. I have worked in Chemical, Fertilizer and oil and gas industry

QA/QC Inspection, Fabrication, Installation, Facilities Upgrade etc.

Special Skills in DCS Operations

SAP SD functional cons. resume total 6 yrs exp 3yrs in SAP SD+ IS OIL functional consultant

Medical support to clients operating in remote or hazardous and offshore environments worldwide. Maintaining adequate medical facilities. Providing services such as First aid training, Health and safety checks and enforcing the companies HSE plan, and ensuring a safe working environment.

Mechanical, Automotive, Project, Calibration, Engineering, Production

Instrument technician

I am working as safety officer at Aramco Saudi Arabia for more than 6 years. I am interested to work in your country. Please arrange my telephonic interview and if you need further documents please inform me on my email.

Operation and Maintenance of Utilities, Project Management, Energy Management, Six Sigma and IT applications

In Indian Naval Hydrographic Department, I have worked in various organizations of Naval Hydrographic Department at various capacities including survey assignments onboard ships, National Hydrographic Office as Quality Controller/Quality Assurance member and National Hydrographic School as Hydrograp

15 year career of Document Management and Control. Assisted in the development and implementation of EDMS. Held over sea positions in various European locations, Middle East and Asia. Conversant with International standards, guidelines and regulations.

A Nigerian. Qualified and experienced geoscientist with 5+years cross-functional experience.

Drilling Engineer / TourPusher

Petroleum Engineering

interpretation of isometric drawing. preparation of materials, equipment and tools for the installation. cutting and grinding as per cutting plan, lay-out f pipes and plates as per drawing, fabracation and installation of pipe spools, pipe supports and other structural supports.

Working as a piping engg. in Satnam Engg. & Fab. Pvt. Ltd. I take training for piping design and also done PDS training.i had completed my B.Tech Mechanical engineering in 2007 from U.P.T.U. Lucknow. I have one year experience in construction field and searching a job i

First Prev [ 101 ] 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out