Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #70595
next resume »»
CONTACT INFORMATION:
View contact information...
Work-related courses:
Written Communication-Report Writing, OLI, BC
Technical Writing, OLI, BC
IT Certificate, OLI, BC
Financial Management, OLI, BC
Oilfield-related tickets:
Magcobar Basic Mud School, Houston, Texas, 1980
Magobar Advanced Mud School, Calgary, 1982
MI Advanced Rheology Course, 1983
IEL Workover and Completion Fluids, 1985,
WHMIS
TDG Training
H2S Alive
First Aid Level C CPR
First & Second Line Supervisor's Well Control
Regulatory Awareness for Wellsite Supervision
Safety Management for Wellsite Supervision
Detection and Control of Flammable Substances
IWCF WELLCAP
___________________________________________________________________________________________
Oilfield Experience:
1974-1979. Roughneck, Motorman, and Derickman with Loffland Brothers, AMC Montgomery, and Challenger Drilling.
1980-July 2005. Consultant and staff mudman with various mud companies working in the Western Alberta Basin in Alberta, BC, and Saskatchewan; the St. Laurence Lowlands in Quebec; the North Atlantic---offshore Sable Island and Newfoundland; The Canadian Arctic; Montana; Greenland; Costa Rica; Columbia; Ecuador; Bolivia; and Chile.
August 2005 to Present. Consultant Wellsite Supervisor with Bob Bonham Consulting and Horizon Energy Management, drilling everything from 3200m wells in the Robb area for Accrete Energy to 150m core wells in the Alberta Fort Hills tar sands for Petro-Canada. In 2007, I specialized in drilling zero- and minimum-disturbance wells for Sphere Energy, and during the 07 / 08 winter season, I drilled 16 of 40 gas wells in the Ring Border region of Northern British Columbia for ConocoPhillips without a HSE incident.
___________________________________________________________________________________________
Capabilities:
I have experienced most types of down-hole drilling problems that one may come across worldwide. These include drilling almost everything from the "hardrock" granites in Greenland to the "gumbos" of the Ecuadorian Oriente. I am practiced in supervising conventional jackknife triples, telescopic doubles, ADRigs, super singles, coil and core rigs, using both over- and under-balanced mediums in areas with ab- and sub-normal formation pressures. I have specialized in zero-and minimum-disturbance drilling in environmentally sensitive areas and have a proven record of drilling with a zero target for personnel injuries, property damages, and environmental impacts.
I am efficient in record keeping, and have been trained in report writing at the Open Learning Institute, Burnaby, BC
I am relatively computer savvy, having used computers at work and home since 1980 and completed an Information Technology course at the Open Learning Institute. I am currently conversant with using Peloton WellView, Excel, Word, and Beyond Compliance Inc. in addition to the Ubuntu Linux Open Office suite of programs.
I have a rudimentary command of Spanish, having worked in five Spanish-speaking countries.
___________________________________________________________________________________________
Personal Background:
I was brought up in Ireland and England and graduated high school with Advanced Matriculation in 1967. Immigrated to Canada in 1974 and took out duel citizenship in 1991.
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 1051 to 1100 of 10179)
Go to Search Parameters...
Brief Description
Chemical engineer OCP MCAD
I here by submit my application for the Toolpusher position in your esteemed organization. I posses about 19+yrs. rigorous, qualitative experience having been associated with leading oil exploring companies. I have experience in directional drilling & under balanced.
I am a civil engineer who has been working in the middle east for the past sixteen years. With a total of eighteen years of professional working experience, of which thirteen years were in the oil/gas and petrochemical projects construction as a civil construction engineer, civil QA/QC engineer.
- seeking reservoir engineering consulting work - 19 years in oil and gas industry - reservoir modeling - well test analysis - petrophysics - production optimization - development planning
Results orientated, hands on multitasked, multifunctional, dedicated manager. Experienced in materials. systems, logistics, & operations management. I am the go to guy to save you from losses in time or money. Please e- mail or call me so we can get together on filling your current opening.
CERTIFIED AS A COMPETENT AUTHORITY AND REGISTERED QUALIFIED PERSON BY INDIAN BUREAU OF MINES, GOVERNMENT OF INDIA FOR MAKING MINING PLANS REGISTRATION NUMBER : RQP/NGP/199/97/A NAGPUR
Petrophysicist Formation evaluation, Production log processing and interpretation, Geologist- Basin Modelling, LWD, MWD, mud logging, Geological interpretation of well logs, data management, Production geology. Interpretation and evaluation of well logs ranging from exploration to production and rea
Experience of over 20 years to serve you to the best of my ability without any supervision.i have HND in electrical engin. and Diploma in Computer technology from recognised university from my country.I have worked in different fields including UN mission .
I have drive, motivation, confidence and determination.
Team Oriented Land Drilling, Production and Management Professional offering innovative solutions to client needs while enhancing safety, productivity, sales and backlog. Candidate desires to demonstrate leadership, grow a progressive company, cultivate/mentor people and foster long-term, positive r
Locate of lines, pigging, maintance, gas flow,
I have worked in the management role for over twenty years in mechanical integrity by performing root-cause analysis to ensure consistent and cost effective approach to reliability improvement and preventive maintenance in fixed and rotating equipment in the Petrol-Chemical/Refinery and the Power In
Currently I am employed as a Senior Process Technician in the Luboil Unit at SAPREF (Shell & BP SA Petroleum Refineries) a 180 000 bbls/d refinery situated in Durban on the east coast of South Africa. I have just over eleven years oil refinery experience mainly in the Production/Operations Departmen
QUALIFICATION :- DIPLOMA IN ELECTRICAL ENGINEERING WITH FIRST CLASS
Powerplant operations including400/1500psi boiler/steam turbines/gtg/water treating
Degree in electronic engineering in the next December, however now I am electronic technologic with 14 years of experience in the petroleum industry
MSc in Petroleum Engineering from the University of Oklahoma, USA with over 11 years of experience in both Industry and Academia to offer.conduct reservoir management activities and participate in interdisciplinary reservoir study teams. Bring a focus on performance of complex tasks.
A four your degree holder with one year Shift Supervisor Process (SSP) and six years as a Control Room Operator on Shell Bonga offshore FPSO.Have various oil and gas experience offshore, swamp and land facilities.
Diploma in chemical engg with 15yrs exp.in oil & gas industry
To promote my abilities and talent towards a growth oriented career and to give the best services to the Organization.
Application for the post of Piping Designer / Mech. Draughtsman
Write-up pre-commissioning, commissioning procedures, start-up schedules and reviewing. Provide necessary technical information for procurement in compliance with tender specifications/data sheets and within budgeted man-hour and project schedules.
Doctor of Philosophy in Science in Exploration Geophysics, IIT, Kharagpur, Calcutta, India (1977-82).• Master of Science, Technology in Exploration Geophysics, Osmania Univ., Hyderabad, India (1974-77).• Master of Information Technology, Curtin University of Technology, Perth, WA, Australia
Piping /Supervisor/ Superintendent Site Manager. City and Guilds I Basic, II Pipe work, III Advanced Piping, 1970 TO 1975, Northern Counties, Engineering Craft Studies, Level 3 Pipe Fitting, 1970 to 1975 Time served (1970-1975 Emanuel Spence Pipe Services
25 years experience in drilling rigs, triples,doubles, Worked Fayetteville Shale, and the Andarko Basin from McAllister Oklahoma to Amarillo Texas and worked over seas.
24 Years experience in the LNG & Gas/Oil industry, 15 years of them are in a supervisory post.
Experience in design with Engineering Consultancy and EPC Firms in Refinery, Oil & Gas Pipeline projects, Power projects, Substation projects in India, Middle East, Africa and Canada.
Drilling Foreman (Drilling Supervisor) I have 30+ years drilling experience, which includes working as a rig worker, Mud Engineer, and Drilling Foreman.
Qualified electrician; award for best driver over 7yrs avrage 45000km a year at eskom
Experienced Operations Geologist, with some play generation experience, M.Sc. level education, familiar with LWD/MWD logging and all petrophysical tools. Well versed in report generation, well supervision/monitoring and well able to QC and convey all relevant drilling and geological data.
I am a Petroleum Engineer of 14 years of oil and gas experience I have broad based skill that spread into financial and management and Reservoir modeling,seismic interpretation,seismic inversion ,great marketing skill.I have created a niche for myself in directional surveying in Nigeria.
Alberta B pressure welder/red seal certified. safety tickets all up to date
Project Engineer / Construction, Commissioning, Completions, Start Up Manager
ELECTRICAL ENGINEER WITH MORE THAN 14 YEARS EXPERIENCE
Free!
Senior Procurement Advisor with 25 Years Experience in Purchasing / Expediting / Logistics /
I am currently unemployed. I was Well Services Supervisor with Total NIGERIA, previously I was working with Total ABK Main office c/o Almansoori, providing well supervision and coordination in Slickline, Well integrity management and Well servicing. I also have 25 years experience as a Slickline Sup
An Inspection / Static Equipment Integrity Engineer with 14 years experience in oil and gas industry.
Broad background in business administration with strong emphasis on HR, payroll, client account management and client relations. Able to multi-task in fast paced environment and work under pressure to meet deadlines. Attends to details and highly organized. Client focused, able to maintain confident
Fifteen years of experience in the field of Design Engineering in the areas of Onshore/Offshore facilities and Petrochemical Plants. Experienced with various computer aided system platform/ design software (3d & 2d) such as MicroStation, AutoCAD , PDS, PDMS, PSDS, OrthoGen, SPR and SPI.
Welding Inspector and Inspection Engineer
Caterpillar trained technicians and mechanic can do overhauling and repair all caterpillar engines generators and machines and have a good knowledge in troubleshooting of mechanical and electronic caterpillar engines,can do components repair, pumps,final drives,pump drives,trnsmission torque conv.
Procurement Manager for 1. Projects, 2. Services, 3. Transactional, 4. Contracts, 5. Materials Management (For Oil/Gas, Petrochemical, Shipping, Semiconductor, Manufacturing, Trading), Multi skilled level.
Over 22 years in drilling field high pressure and temperature oil and gas wells.
My career objectives can be summaries as follows: to obtain a challenging management, administrative, or technical position as deemed suitable to my skills, experience, and backgrounds, to help a successful organization or company expand further and to help myself grow further professionally.
Bachelor of Science(chemical) /Diploma in Industrial Safety/Diploma in Process control and Instrumentation
Wide experience leading project engineer assignments working with design/engineering teams in the supervision, development and preparation of engineering and construction documents and drawings.
Mail – Document Controller \ Administrative Staff \ Computer Crew \ Accounting Staff
NAME:JOHN GOODDY
Master Electrician \ Instrument Tech \ PLC Programmer
BEng(Hons. – 1st), C. Eng, MIMechE. Over 17 years experience in various aspects of engineering, planning, procurement, construction, installation, renovation, hook-up, pre-commissioning and commissioning of Offshore Fixed Topside Petrochemical and Living Quarter Facilities, FPSO topsides and MOPU’s.
First
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
[ 22 ]
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Next
Last
Seach Parameters
Change search parameters...
INDUSTRIES:
Petroleum/Oil/Gas;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2008 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com