Resume - Engineer- electrician. Electrical installation testingand setup electrician.

Misco Jobs

Resume #70921

CONTACT INFORMATION:
View contact information...

Date of birth - 11.07.1967.
Citizenship - Republic of Kazakhstan. Nationality Ukrainian
Education - 2002.-2007. Southern- Uralskiy State University. Chelyabinsk City. Russia.
«Power Electrical Systems and Networks». Qualification: engineer.
1982.-1985. Polytechnic college. Duty mechanical electrician.
Qualification - Engineer- electrician. Substation 110/35/10 duty electrician.
Electrical installation testingand setup electrician. Safety electrical group 5. Over 1000 volt.
Experience - 01.2005.-04.2008. Tengiz oilfield. 'Sapsan' LLP electrician. SGP
Description of works: maintenance and repairs of small power equipment,
ISWG, JB below 1000 v. HVAC system YORK- YCUA 210. Registration of technical dossier.
(Move) 07.2004. - 01.2005. "Kostanayenergo" LLP The 5 grade automation and relay protection electrician.
Description of works: maintenance repair and setup of maximum current protection,breaker set- point; ground, differential,current and gas protection; automation system, alarm system, electrical equipment, chargers. Volt-amp checks CT servicing. There were 19 substations under service in the area:110kv/35kv/10kv: 110/10kv: 35/10kv:
11.2003.- 07.2004. "Kostanayenergo" LLP 110/35/10 Substation equipment maintenance electrician.
Description of works: maintenance, repair and setup of electrical equipment,110kv power transformers of the following types; Voltage measuring transformers of the following 110 kV: 35 kV: 10 kV.
Current transformers of different classifications. Oil switches.
Electrical and mechanical interlock breakers of the following types.
There were 19 substations under service in the area:
110kv/35kv/10kv: 110kv/10kv: (Move)
10.2002. - 09.2003. Karachaganak oilfield. Aksay City. Unit-2, KPC.
"Inzhtechservise" LLP. Electrician (testing and setup)
Description of works:commissioning of electric motors of all ratings from 0.23kv to 6kv. Work on MM2 motormanagers service, maintenance, current injection test, current voltage diagram reading, modernization etc. Work in substations KPC S.S.4.0. UNIT-2 S.S.
NOUVO PIGNONE A.B.C. Commissioning trace-heating panels and trace heaters themselves, power transformers, lighting fixtures.
Registration of technical dossier,filling-in, and handover of protocols.
Registration of As-Built dossier.
05.2002. -10.2002. Karachaganak oilfield. Aksay City.
Unit-2 "Kazelectromontazh"
Description of works: electrician working on the installations of power el. equipment,areas: 3100; 4200; 5610; 5620;
(Move) 11.2000. -10.2001. "Kostanayenergo" LLP. Relay protection and automation engineer.
Description of works: commission works on high-potentialSubstations maintenance, repair and setup of maximum current protection, breaker set-point; earth, differential,gas protection. Automation, alarm system, instrument and chargers. There were 19 substations under service in the area; 110:35; Registration of technical dossier.
06.2000. -11.2000. "Kostanayenergo" LLP Substation 110kv35kv10kv duty electrician.
Description of works: substation equipment service, power transformers, oil switches, line breakers, current transformers, dischargers etc. Routine switching, communications,date log. (Move)
Additional inform - Certificate of Completion. "TCO Safety Watch Training Course".
Badge PFD; TCO.
PC - The experienced user, "Word", "Excel", File manager, Windows XP.
Internet.
Languages - Russian- fluent, English- basic three month course.
Characterization - Sociable, responsible, liable.
Interests - Like reading technical literature. Healthy lifestyle.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1851 to 1900 of 9922)

Go to Search Parameters...

Brief Description

15 years experience Seismic HSE Operations

Industrial Engineering, 12 years experience in Projects Management, Tenders Management, QA/QC & Planning in Offshore & Near Shore Oil & Gas Projects

I am familiar with almost all of Occupational Health and Safety (OSHA) Rules and regulations for:

A Professional Engineer in the field of Instrumentation & Control Engineering for Oil, Refinery, Gas, Power Sector and Process units control systems. Having 11+ years professional experience in the EPC Contract for turnkey Projects handling Installation of Instrumentation and Industrial Proces

Environmental, Health and Safety Specialist and Industrial Hygienist experienced and Certified by the Board of Certified Safety Professioals

Geoframe data loading (2d,3d, well data), Geoquest software support (Charisma, CPS, and Finder), Project management, Unix Environment.

3 Years Mechanical Engineering Course with First Class passed in 1987 from India.

Multiskilled instrument & control tech, experienced in oil & gas. Excellent computer skills with hands on experience in maximo system.

Piping Draftsman

1. DCS (Honeywell plantscape and SCADA rev320) and FSC (Honeywell Fail Safe Control)

I am an experienced exploration consultant, advisor, manager, educator and research scientist. I have extensive experience in exploration play, prospect and basin risk analysis and in designing exploration strategy and organizational structure

More than 20 years of professional engineering practice. Solid background in all aspects of building construction including design, inspection, fabrication, erection, estimating and detailing. Involved in major construction works like hospitals, office, commercial, industrial, petro-chem plants.

During successful career with Mobil Oil and Bechtel Corp, developed expertise in technical and management functions for stateside and offshore supply chain projects ranging from $150 million to $3.5 billion.

Iam an innovative, dedicative, initiative and dynamic HSE person. I have experience 15 years in HSE OIL and Gas Industry, especially in develop HSE Management System, Environmental Management System ISO 14001 and Contractor HSE Mnagement System.

Chartered Accountant with CISA and CIA having more than 15 years experiance

Reservoir Engineer 12 Yrs. experience. Strong technical Background - emphasis on simulation and modelling. Provided technology support within an E&P Co. Background in geophysics, geology, petrophysics. Professionally developed as a consultant. People oriented, Dynamic.

Looking for a petroleum engineer postion and will relocate.

I'm basically an Industrial Engineer graduated from the US.I have been able to build up a career in manufacturing at a senior position,Operations/Plant manager level.

Industrial Control & Automation Systems PLC programmer (Siemens, Schneider Electric) Repair and maintenance - electrical devices

Process Control design, analysis, and tuning, ESD logic design and analysis, Systems experience: Honeywell DCS, Triconex, Wonderware MMI, PI, and Mitsubishi Diasys Netamtion

Experienced Rig Safety Officer capable of performing Audits to verify compliance to company’s Policies and Procedures. Conduct SMS audits on Rigs to. Conducted Training sessions to rig personnel in Safety and Emergency Procedures. Cooperate with all disciplines to improve effectivness of the SMS.

DCS OPERATOR

After completing my Diploma in Mechanical engineering from India I joined Shipping as Engine Cadet on a Product Tanker. After completing one year cadet ship I went to UK in March 2000 for National Vocational Qualification course In Marine Engineering and down all advance survival courses from there.

Maintenance Engineer (rolling mills)

INSTRUMENT ENGINEER / SUPERVISOR

Free! M.Tech with 7 years of work experience in managing functional aspects of Static Equipments Design & Engineering. Expertise in planning, executing and spearheading projects involving Design Engineering and Resource Planning with a flair for adopting modern construction methodologies in compliance to

Mechanical supervisor / Technician with experience in permit coordination

Petroleum Engineer with expertise in pipeline inspection, MFL technology, corrosion diagnostics, pipeline integrity management and assessments, large-scale petroleum relational database design and interpretation, financial analysis, budget analysis, and project management.

Process / Systems / Operations

Drilling Superintendent - Senior Drilling Supervisor, International Positions Only

Electrical / Instrument Inspector

Objective: To share knowledge on Best Practices on Health, Safety and Environment (HSE) in the development and implementation of HSE Management System and promote a culture of Continuous Improvement.

I am a senior instruments engineer. I have 15 years experience in the design and specification of instrumentation for petrochemical plants. I was involved in developing P&IDs, specifications, data sheets, logic narratives, instrument indexes, systems diagrams and alarm summaries.

Bioinformatician and clinician

To obtain a challenging engineering position in an internationally active oil/service company. Education The University of Texas at Austin May 1993 Master of Science in Petroleum Engineering. Overall GPA 3.83/4.00

I have extensive experience in Production Operations in the oil and gas industry.

Experience in Exploration and Development Geology, having involved in exploration of new areas and Enhancing of Oil Recovery in the fields of Northern Potwar Deform Zone and Middle Indus Basin of Pakistan. Day to day duties include studying the current reservoir properties via interpretation of geop

Stage 3 crane operator 25 years experience oil / gas / subsea / construction

Experienced Engineer working as Test Engineer for latest released versions of DeltaV software applications. Flexible knowledge in hardware technologies like Fiedlbus and SIS.

Engineer- electrician. Electrical installation testingand setup electrician.

Oil and gas Utilities Senior Operator, start up, power plant shift enginner

diesel mechanic&fitter turner machinist with technical management skills. 28yrs exp. expat . job locatio no problem. brief off shore exp.

Hands of experience with good knowledge of engineering (standards) & trouble shootings working with one of the major such as SABIC projects (Yanbu national petrochemical company) with Technip JV Irem sPa, and other than working with Steel plant in one of the major company JINDAL group.

My name is Garry Jennings and I would like to introduce myself as a possible candidate for the fulltime Operations Technicians positions.

Sales, marketing & Applications Eng. for all ESP applications

I am an experienced Fire Protection personnel. My experience not only in hands-on fire protection activities but also in fire risk assessment, fire protection training and supervising of down line personnel, fire protection system auditing, safety at work issues auditing.

Metallurgical & Welding Engineer with experience in failure analysis, materials characterization, welding Technology, Microstructure-Property correlation, Research and Development, QA/QC, NDT, WPS, PQR Certification Project Quality Management System, Internal Quality Audit. Expert in engineering eva

I am experient with AutoCAD by new released and CAD worx to made 3D model of piping

Drilling Engineer

Calculated volumes, Maintained well, equipment and compressors, participated in well reviews, intered volumes in computer.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 [ 38 ] 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out