Resume - Experienced Drilling Supervisor, Well site supervisor Years of experience on ma...

Misco Jobs

Resume #70968

CONTACT INFORMATION:
View contact information...

Employment Objective: Drilling Supervisor, Wellsite Supervisor

Executive Summary:

My oilfield career began when I was young working for my fathers operating company, roustabouting and pumping. I broke out on the rigs in 1986 and used this experience and money to put myself through college to earn my engineering degree. Seen herein is my work history for Operators, Service Providers, and contractors. My work development philosophy began with first training & educating myself on field operations, problem situations related to the area or culture, or development of necessary specialty skills with tools, such as directional, guidance systems for directional wells, open hole & cased hole DST's, Completions, & Workovers. My career then grew into most Operators desire to move me into either engineering, superintendent of daily operations, or total Project Management. Mostly my desire at this point in my career is to return to field operations as a wellsite supervisor on challenging wells that include HTHP, under balance drilling, mud cap technology, and with a strong emphasis on HTHP & Directional wells.

Qualification Highlights:

* Established reputation as a Wellsite Supervisor that will improvise to the equipment or strengths available on location.
* Quickly identify problem situations and begin trouble shooting those problem areas from the wellsite as needed with forward planning & procedures sent to the customer's engineers and superintendents for additional input to mitigate expensive and complicated resolutions.
* Strong team leadership skills which include 12 hour written forward plans for each crew to let the team know the daily plans and always with emphasis on safety, health, & environment. (As shown below in my Experience History, one project included 22 Nationalities with 17 languages.)
* Most of my wellsite supervision has been in domestic operations in many different areas and environments This has development my drilling skills to adapt to various types of drilling conditions including HTHP wells, all types of directional wells, multi-lateral wellbores, and under balanced drilling at mud weights above 15.6 PPG with 18.2 PPG mud cap techniques for tripping or surface pressure control.
* My career has been split in approximately the same fifty percent as Wellsite Supervision to the other fifty percent to engineering, superintendent, and Project Manager.
* Maintain industry certifications for well control, all aspects of safety including but not limited to "First Responder", "Fire Fighting" & "Confined Space Rescuer & Supervisor", with Environmental and Health training for environmentally sensitive locations and large sequestered camp locations.

Experience History:

* 2007- Present Independent Consultant working under my consulting firm and other firms as necessary. Included primarily Most recently wells drilled were all directional, mud weights ranging from 14.0 to 18.2 ppg, polymer base, synthetic oil, and conventional oil base mud systems. Maximum temperature range to 325° F. Wellsite Supervisor, Design Engineer, and Superintendent on dual lateral hot holes to 302° F with each lateral measured depth up to 19,200' with under balance drilling techniques using mud cap procedures for tripping and other means of surface pressure control.
* 2005-2007: Worked in Kazakhstan as Drilling and Completion manager
* 2004-2005: Worked as independent Consultant as well site supervisor on many different Drilling and Completion projects for E and P companies such as Chesapeak energy, Conoco Phillips, Shell Petroleum just to name a couple. All of these were domestic
* 1997-2004: Worked for Lance Ruffel oil and gas out of Central Oklahoma, supervised the Drilling and Completions of many different projects from HPHT at depths up to 15,000ft

Professional Accomplishments:

* Successfully managed and drilled wells for various Operators as Wellsite Supervisor, Well Design Engineer, Superintendent, & Project Manager.
* Drilling Manager in Kazakhstan. Accomplished working over several Former Soviet Union wells to increase production. Researched, programmed, and performed Wellsite Supervision for these wells. Westernized a Russian drilling rig to enhance capability of drilling high angle holes under the Caspian Sea. Jointly managed the construction and drilling from the first man made island in the shallow waters of the Caspian Sea. The challenges of this project improved all phases of my personal and professional career needs and goals. As a $52mm project that included the management of a 188 person camp (22 Nationalities & 17 Languages), helicopter operations, track vehicle transportation of large rig components, in serve hostile weather conditions and in an extremely remote geographical location.

Educational and Personal information:

* Oklahoma State University. Bachelor Science PET.
* Multiple colleges and short courses educating in business economics, business law, contract law, negotiating, and personnel management.
* Continuously remain current with industry standards for BOP, Safety, Environmental, & First Responder.

Reference are available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 451 to 500 of 9901)

Go to Search Parameters...

Brief Description

Electrical and Instrument Project Execution, Installation and Estimating

Telecom field technicians Customer end

Procurement, Contracting, Logistics and Inventory management

QA / QC Engineer - Painting / Coating / Insulation / Refractory / Fire-proofing

Principal Engineer with 20 years Umbilical, Flowline and Riser Experience Design, development and installation of flexible Flowlines, risers, umbilical and oil offloading lines and associated ancillaries. Including dynamic, structural and on bottom analysis.

Free! I am a chemical engineer having 17 years of work experience in India and Bahrain at various management levels in process engineering and operations, troubleshooting of of Fluidized catalytic cracking, gas compression, concentration units, and hydro processing units, gas treatment & sulphur recovery

Having 24 years of experience in IT Industry, working in different roles, initailly started with Analyst Programmer and now working as QA Manager in an Offshore software development company in Pakistan and supporting UK based clinets. Would prefer to work in QA department or Project Coordinator.

22 years of experience in instrumentation maintenance,commissioning and start up activities in various oil and gas companies ,offshore platforms in the gulf and India like ADGAS,Dubai Petroleum Company,Qatar Petroleum etc,,

Two years post apprenticeship training as a Welding Engineer, under the supervision of the senior welding engineer, working on the manufacture of overland pipelines, pressure vessels, nuclear pressure vessels, heat exchangers and various projects for the Middle East and Libya.

Totally 25 years experience in execution of Electrical Maintenance works in 210MW, 150MW, 120MW and 20MW Generators, Transformers, Breakers, Motors, UPS, MOV, EOT Cranes, HVAC, Lightings, Protection Relays Testing, electrical equipments and PLC, DCS, SCADA, WinCC, S5, S7 hardware

24 years of operation experience in Petrochemical Industry

QA/QC Instrumentation Engineer / Inspector - 17 years experience in Oil & Gas (16+ years in Middle East with Saudi Aramco, PDO, KNPC, ADNOC & RAS LAFFAN), Certified Lead Auditor, GCC & International Driving License, Well versant with Codes & Standards

Managemen and Multidiscipline Engineerign Coordination of Oil & Gas Industry |FEED and Detail Engineering Projects.

Bachler in Arts + 3 yeart Appranticship in Instrumentation and control

Experienced Drilling Supervisor, Well site supervisor Years of experience on many drilling and completion projects.vertical,horizontal, multilaterals and some erd. I have worked throughout central U.S. and The Republic of Kazakhstan.

Experienced in Mechanical & Electrical Installation Of Equipments in Plastics & Petrochemical Industries

having 18 years of sound experience in Commissioning and design, with Bachelor degree

Development and implementation of Safety Mgt System, OHSAS 18001 Auditing, Development od SOPs, Safety Training, Compiance of regulations

unigraphics designer drafter

Interested in jobs in Saudi Arabia only. Although, I specialize in biomedical sensors and microelectronics, willing to try out other areas of Eng.. I have more than 15 years industrial experience in diverse engineering disciplines.

I am a Senior DCS/Instrument engineer with 19 years of experience in Project engineering, Construction, Commissioning and Maintenance support of Oil/Gas & Petro chemical industries.

Safety/HSE Manager

Plant commissioning, trouble shooting, revamps, cost reduction, productivity improvements

Logistics and Operations Support included construction management transportation and Procurement Management FCILT MS UC Berkeley in transportation engineering with 24 years experience, recent 10 in Oil and Gas

20+ years RE experience in brownfields, greenfields, offshore, onshore, dry gas, gas condensate, light, medium and heavy oil, sand and carbonate. Expert in WT design and interpretation, Reservoir Simulation, Horizontal well, Tight Gas, Hydraulic Fracture,Fractured Carbonate, EOR (WAG, CO2, Thermal)

I am a diploma holder (3yrs course). Having wide knowledge on electrical / Instrumentation / process control panel board operation. Having 19+ year experience (includs 12yrs Oil and Gas plant). Looking for rotational jobs

Petroleum Engineer, Well Site Supervisor

13 yrs exp in oil industry with 6 yrs as a Geologist. Worked in different countries of Asia & Middle East with numerous clients. Experience in clastic, carbonate, & basement reservoirs, HTHP wells, horizontal drain with geosteering tools. Currently working as Wellsite Geologist for Total Yemen.

Telecomprofessional with 30 years of international experience in Africa, Middle East, Europe and North America seeking next assignment

Staff Petrophysicist with a wide range of skills in petrophysics, over 20 years experience working in many parts of the world.

25 years Drilling, Completion, Work-over Supervision. International experience Dominican Republic, Venezuela, Oman, Qatar, Ecuador and North Sea. Domestic experience Kansas, Oklahoma, Colorado, Texas, Louisiana and Alaska. Sub Sea experience Gulf of Mexico and North Sea.

22 years of aircraft maintenance related experiences with the United States Air Force

Efficient and Self-motivated Process Personnel

NAME SANJEEV S. KULKARNI QUALIFICATION : MECHANICAL ENGINEERING EXPERIENCE : TOTAL 25 years oil field

Currently working for Raslanuf oil and Gas Company (RASCO) as Senior Process engineer, Working within Technical services department Process engineering Division.

Petro-Chemicals Operations, Training, Technical Writing

Reservoir, simukation and production engineer

Experience maintenance planner in oil and gas industry. Also has experience in quality control and inspection of materials and spare parts. Knowledge in MS Office applications and Maintenance Managment Computer System

I am a successful, experienced and qualified Start up Specialist, Commissioning Production Supervisor, FPSO Trainer with over 28 years extensive experience (both onshore and offshore) within the oil, gas & petrochemical industry.

Electrical Engineer Technician; 14 years experience; Master's Degree; Commissioning; Pre- commissioning; Inspection; Testing; National Electric Code

I am a mechanical & metallurgical engineer experienced in QMS ISO 9001:2000, internal auditing, welding, NDT, materials etc

17 years as Executive Admin., currently licensed Realtor, Earned BBA in Business and requirements for Accounting degree. Microsoft Office proficient. 4 years as Budgeting Analyst.

Topsides Manager..FPSO

Certtified hygienist with more than 30 years of experience. Presently working both onshore and offshore in the Middle East. Qualified OHSAS 18001 auditor. Masters degrees in both Occupational Health & Environmental Management. Excellent interpersonal skills. Looking for challenging position.

Key Competencies: over 20 years of experience in technical jobs: On shore, Oil, Gas and petrochemical and Power Plant Industries involved in Project Management, Commissioning Maintenance and repair, Lubeoil/seal oil flushing of compressors and pumps, QA/QC rotary and static equipments, etc.

Senior Mechanical Engineer (Projects/ Engineering / Design). I have diversified experience of about twenty-four (24) years in the field of Design & Projects Construction of Gas & Oil Production(onshore / offshore), Artificial Gas Lift, Water Flood and Oil Refining.

3 years working in PAE as Main Drllg. Eng. in charge of vertical & horizontal wells (oil & gas). 9 years w/Total (Argentina) as Drllg. Sup. onshore & 2 years as Coman Senior offshore ( jack up).Several positions f/Drllg trainee to Drllg Manager in Drllg Contractors Companies.

Strong background experience (19 years) in petroleum engineering, optimizing oil & gas fields, plants operations and gathering systems. Leading operation team in planning and monitoring production activities

Analyze requests for contracts initiation and develop contracts packages, set and recommend qualification / evaluation criteria and negotiation strategies and attend the same, coordinate and advise users Divisions on contractual and commercial matters.

i am working as DCS panel foreman in a big oilfield of ADCO company in abu dhabi UAE

First 1 2 3 4 5 6 7 8 9 [ 10 ] 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out