Resume - MSc in Petroleum Engineering from the University of Oklahoma, USA with over 11 y...

Misco Jobs

Resume #71199

CONTACT INFORMATION:
View contact information...

PERSONAL INFORMATION
- Marital status: Married
- Nationality: Algerian
- Date of birth: October 08th 1972

SUMMARY OF QUALIFICATIONS
With a MSc in Petroleum Engineering, a total work experience of almost 11 years in both industry and academia and a continues intensive training a lot of technical and management qualifications were gained, such as:
Carrying out Petroleum Engineering studies and project work, responsibility of the performance of complex tasks, providing cost effective solutions in all aspects of drilling, well completion, well interventions and workover activities, from job design to on-site implementation, conducting reservoir management activities and participating in interdisciplinary reservoir study teams.
Able to demonstrate competence in:
- Well planning/design, well intervention and well maintenance.
- Nodal analysis (inflow/outflow performance).
- Production Logging interpretation (PLT, WFL).
- Reservoir monitoring activities (pressure, fluid sampling, flow testing etc.).
- Well test analysis and in industry stranded well testing packages.
- Production chemistry including design of treatments such as Asphaltene deposition, Salt, scales and corrosion problems
- Exposure to water flooding and gas injection projects.
- Artificial lift, such as Gas Lift, ESP, techniques.
- Preparation and QC of production/injection data allocation reports.
- Good technical report writing in English, good communication skills and computer literate.
OBJECTIVE
PETROLEUM ENGINEER (Production and/or Reservoir)
EDUCATION
2007-2008 KFUPM Dhahran, Saudi Arabia
PhD in Petroleum Engineering (in Progress).
1999-2001 University of OKLAHOMA OK, USA
Master of Science in Petroleum Engineering
1992-1997 Algerian Institute of Petroleum Boumerdes, Algeria.
Engineer Degree (BSc) in Production and Drilling Engineering
1992 Baccalaureate in Mathematics with distinction (good).
PROFESSIONAL EXPERIENCE
2007-Current KFUPM Dhahran, Saudi Arabia
Lecturer B in Petroleum Engineering Department.
- Carried out Petroleum Engineering studies and project work,
- Research assistance to professors.
2002-2007 SONATRACH-Anadarko Corp. Hassi-Messaoud, Algeria.
Petroleum (Production and Reservoir) Engineer.
- Monitors fields' production performance and proposes suitable measures to ensure optimum recovery of reserves.
- Stays abreast of and advises on possible changes to current wellbore design, gas-lift design, ESP, stimulation, etc.
- Works with other departments to exchange ideas on the latest technologies required to improve well and field deliverability.
- Experienced with:
- Well testing and allocation of well test/production data,
- Tubing and IPR modeling and Gas Lift design/troubleshooting,
- Interpretation of cased hole production and diagnostic logs.
- Has strong teamwork skills and experience working in a multicultural and multinational environment.
- Has experience/knowledge of current computer software for production and reservoir engineering applications.
- Strong ability to:
- Carry out detailed analysis on data obtained from well and field tests in order to define well and reservoir parameters, such as reservoir permeability, reservoir pressure, formation damage, well productivity and injectivity index,
- Participate in the preparation of reservoir tests, production logging and sampling requirements. Devise well testing design, including gauge specifications, flowing/injection period and shut-in time,
- Compare the interpreted test data with previous tests results to recommend remedial measures if required and ensures the updating and maintenance of well testing data files, perforation files including computer data files,
- Participate in studies designed to improve well testing interpretation methods to be available in the Company
- Participate in the studies aimed at deriving oil production and water/gas injection rates necessary for oil production to conform to specified constraints such as limitations of gas/oil ratio, water/oil ration and reservoir pressures by evaluating updated production/injection performance plots,
- Carry out certain studies based on the derived test results and the application of other reservoir engineering techniques (e.g. isobaric maps, isopermeability maps),
- Carry out other similar or related duties such as collecting all data related to well testing, production/injection and participating in defining requirements for operations such as PVT Coring...etc.
- Carry out some simulation model studies particularly using models transferred to the reservoir management section to utilize these as an effective monitoring tool.
2000-2001 University of Boumerdes Boumerdes, Algeria
Part-Time Teacher of Hydraulics
- Taught mechanics laboratory skills for first year petroleum engineers.
- Taught and improved hydraulics skills for first year DEUA (hydrocarbons and chemical senior technicians).
1997-1999 National Military Service ANP, Algeria
National Military Reserve Officer
- Responsibility and commandment skills,
- Team work importance,
- Develop and mentor subordinates.
TRAININGS
2006 ENSPM-FI French Institute of Petroleum Paris, France
Short Training: PVT Studies
2006 SONATRACH-ANADARKO Algeria Corp....ALGERIA
Short Training: AGAR-Multiphase Flow meters
2005 IWCF-SONATRACH-DF....................................ALGERIA
IWCF, international well control forum certification
2005 SONATRACH-ANADARKO Algeria Corp....ALGERIA
HSE-Permit to work and risk assessment
2004 SONATRACH-ANADARKO Algeria Corp....ALGERIA
DSS-Data Surveillance System, Landmark, Ltd.
2003 SONATRACH-ANADARKO Algeria Corp....ALGERIA
PDMS, Production Database Management, Schlumberger.
2003 ENSPM-FI French Institute of Petroleum Paris, France
Reservoir Management: Drainage Mechanism, Secondary Recovery and Development Project.
2003 SONATRACH-ANADARKO Algeria Corp....ALGERIA
Prosper, GAP, MBal, Petroleum Experts, Ltd.
1999 SONATRACH-Language Solutions, Ltd.....Bath, UK
One Month English Language Training, with computer based TOEFL.
1997 SONATRACH-DF.................Hassi-Messaoud, ALGERIA
Nine months: Drilling (field-rig and Engineering-office)
1996 SONATRACH-DP.................Hassi-Messaoud, ALGERIA
One month: Production Facilities and Interventions (field and Engineering)

1995 SONATRACH-ENTP............Hassi-Messaoud, ALGERIA
Two weeks of field training (rig) on drilling.

LANGUAGES
Has a high level of competency in spoken and written English, French and Arabic with strong communication skills and interpersonal relationship.

INTERESTS AND ACTIVITIES
Research, Reading, computer software, sports...

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1701 to 1750 of 10917)

Go to Search Parameters...

Brief Description

I have sufficient exposure in dealing with International Audit and Inspection like MCA-UK., U.S.F.D.A., MCC - South Africa, WHO Etc. Man Management is my proven skill for years. Maintain focus on achieving bottom line result while formulating and implementing the advanced technolog and productivity.

To secure a full-time position with an industry leading company world-wide in IT – Manager / Project Manager / Project Coordinator / Senior Planner

Experienced Drilling and DHS Supervisor

M.Tech Geo-Engineering, 9 years of proven industry experience in Geology, GIS, RS, Image processing, QA & Testing, Performance Engineering on Financial, Accounting, CRM, ERP, Retail, B2C Web & Client Server applications like ESRI arcGIS, ERDAS, MapInfo, AutoCAD, Java, J2EE & .Net, Data Warehousing

Perform all oil and gas estings, envirmental testings, wwtp testing, utility relating testing, chemical preprations, well testings, auxlery fireman, first aider, isorelating working, hse relating working, master in chemistry,

Instrumentation and Control - FEED, Detail Design, Construction, Pre-Commissioning, Commissioning

12 Years of Experience in Oil & Gas, Industrial & Construction Safety (HSE Training)

I am senior Information management engineer with 12 years experience in the Petroleum and IT industries. I have a Bachelor of Mathematic / Information technology

I have been working as an executive engineer(inspection) in chittagong urea fertilizer ltd. since 2nd april,1997 to till date.I have to supervise all on-stream and shutdown inspection activities of different vessels,tanks,pipe lines etc to ensure plant integrity &reliability .

Senior HSE advisor

Electrical Engineer, Planner

cartography_gis_mapping_drafting

110KV/11KV substation equipments like Isolators, Circuit Breakers, Current transformers, Potential transformer, Lightning arresters, Neutral Grounding Resisters & Battery charger, etc.

Chemical engineer OCP MCAD

I here by submit my application for the Toolpusher position in your esteemed organization. I posses about 19+yrs. rigorous, qualitative experience having been associated with leading oil exploring companies. I have experience in directional drilling & under balanced.

I am a civil engineer who has been working in the middle east for the past sixteen years. With a total of eighteen years of professional working experience, of which thirteen years were in the oil/gas and petrochemical projects construction as a civil construction engineer, civil QA/QC engineer.

QHSE Specialist

- seeking reservoir engineering consulting work - 19 years in oil and gas industry - reservoir modeling - well test analysis - petrophysics - production optimization - development planning

Results orientated, hands on multitasked, multifunctional, dedicated manager. Experienced in materials. systems, logistics, & operations management. I am the go to guy to save you from losses in time or money. Please e- mail or call me so we can get together on filling your current opening.

CERTIFIED AS A COMPETENT AUTHORITY AND REGISTERED QUALIFIED PERSON BY INDIAN BUREAU OF MINES, GOVERNMENT OF INDIA FOR MAKING MINING PLANS REGISTRATION NUMBER : RQP/NGP/199/97/A NAGPUR

QUALIFICATION :- DIPLOMA IN ELECTRICAL ENGINEERING WITH FIRST CLASS

MSc in Petroleum Engineering from the University of Oklahoma, USA with over 11 years of experience in both Industry and Academia to offer.conduct reservoir management activities and participate in interdisciplinary reservoir study teams. Bring a focus on performance of complex tasks.

Extensive experience in the petroleum, chemical, pharmaceutical, nuclear and environmental fields. Directed engineering, manufacturing, and construction efforts, including startup and commissioning for owners and contractors alike.

Control Systems (SIS/DCS/PLC) Engineer with >25 years of experience on various process, gas, refining, chemical and petrochemical plants/EPCM in Canada, Saudi Arabia, India & USA. „« Currently doing Detailed Engineering to SAT of Shell¡¦s Upgrader Expansion Project at Bechtel Canada Ltd.

All I&C design aspects. IN-Tools, Microstation, Autocad, MS Office suite software.

Over twenty-eight years in various assignments throughout the oil and gas industry, I have had twenty one years within the production side of the field, including work off the Gulf of Mexico and Venezuela. I have been in charge of multimillion dollar production platforms, responsible for monthly we

G & G Support consultant, experienced and trained on Landmark graphics applications for seismic data interpretation.processing,mapping, time/depth modelling.

Maintaining and overseeing drilling company with 7 drilling rigs and 38 employees

Vastly experienced electrical engineer, manager, superintendent, supervisor

Senior Project Expediter for EPC firms.

I am an operations manager with over 25 years of a proven track record in refinery operation, power generation, training and large refinery projects

Over 25 years of Diverse Design and Drafting Experience

Autocad, Microstation, PDS

Detail engineering and commisisoning

Over ten years in management, team player, strong work and ethical background. Posess excellent oral and written communication skills.

instrument Engineer in OIL& GAS field

Manage, Estimate,billing, Skids and pipe fabrication Shop and field

I am a Master Mariner, presently serving as Senior Master on Crude/Product Oil Tankers of Dynacom Tankers Management

Free! As a hard working IWCF Certified drilling professional with over 23 years of hands-on experience in the drilling industry and as a positive and trustworthy person, I am confident that I can become a reliable addition to your team.

Write-up pre-commissioning, commissioning procedures, start-up schedules and reviewing. Provide necessary technical information for procurement in compliance with tender specifications/data sheets and within budgeted man-hour and project schedules.

A piping designer that has multiple experience in piping industry. Holder of BS Mechanical Engineering with piping design experience over 7 years and more than 5 years of field assignments. A designer that has proficiency in 3D CADWorx, Microstation, AutoCAD, Navis Works, Laser Scan, & PDS trained.

Highly motivted, energetic,and judicious professional looking for employment with diversified corporation for long term employment. Strong attributes include proficiency and multi-tasking. Able to respond to global assignments and enjoy working in a multi-cultural environment.

12+ years of project and design engineering with subsea oil and gas installation contractors and consultants working on package management, site management, installation engineering, FEED and Detailed Design with a strong focus on Subsea Pipelines

OHSAS 18001, ISO 9000, ISO 14001, Operation troubles shootings DCS Control room operations. Plant start up & shut down activities.

Doctor of Philosophy in Science in Exploration Geophysics, IIT, Kharagpur, Calcutta, India (1977-82).• Master of Science, Technology in Exploration Geophysics, Osmania Univ., Hyderabad, India (1974-77).• Master of Information Technology, Curtin University of Technology, Perth, WA, Australia

Mechanical Engineer - Rotating Machinery & Packages

I am having 10 years experience in Oil & gas industry (Offshore & Onshore) in the field of Inspection, QA/QC & NDT. Certified CSWIP 3.2, API 570 & ASNT Level II-RT, UT, MT & PT

I have over 15yrs well testing experience

Areas of Expertise: Design of offshore structures performing Global and Local analysis of Floating Production Systems, Jack up Platforms, Semi Submersible Platforms & Jackets,

QA/QC-INSPECTOR/ENGINEER- E&I

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 [ 35 ] 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out