Resume - Chief Mate License with STCW 78/95 Convention, Bahamian Endorsement, Offshore O...

Misco Jobs

Resume #71205

CONTACT INFORMATION:
View contact information...

1983-1988 Maritime Technical Collage
1988-1999 Army Service
1999-2000 Naval Academy
1990-1994 Graduated Maritime Academy Szczecin, Engineer Degree,

Fugro Marine Services-from January 2008 as Chief Officer on survey vessel, Hazard Surveys, High Resolution Site Surveys, Mineral Surveys Tow Route, Surveys Cable Route Surveys Pipeline Route Surveys Pipeline Inspection Surveys Swathe, Bathymetry Surveys(1000m)ROV Inspection Surveys
CPT and Vibro Coring Surveys, Shipwreck and Air Accident Survey.

MMS- BGP Geoexplorer from August 2006 taking part in converting fishing vessel to 3-D seismic vessel as Chief Officer at STM Shipyard-Singapore. On site as Project Engineer's assistant for marine and safety part. Leaving shipyard on March 2007 and employed on BGP Pioneer as Chief Officer. Performing internal audits on board, training and familiarizing new crew with Company ISM. Implementing Company SMS system and HSE procedures.
Working on Bridging BGP Geoexplorer's and Maritime Management Service's documents. Implementing Hazard Management JSA and Emergency procedures. Preparing vessel for external audit. Taking care of Helideck certification process. Responsible for Marine Purchasing system.

Workships Contractors BV & Petrobras from 02.2006
Chief Officer
Working offshore Brazil on Platform Support Vessel "Scan Carrier''.
Responsible for supervising of marine deck activities, general stability and registration of all deck loads, cargo securing and stowage plan. Supervising all safety procedures and requirements accordingly to Company's ISM code. Act as onboard Safety Officer. Vessel shared with two drilling rigs. Operating with installed CleanCut system on board. Collecting and transporting rig's cuttings. Refueling, supplying drill water and various type of rig's equipment, performing basket personnel transfers. Operating at the rig on joystick.
Ship's DP not certified.

Barber Ship Management & PGS 2002-2005,
First Officer
I have recently almost 3 years working offshore Malaysia, Indonesia, India, Ghana, Madagascar and Nigeria in a very challenging role, in a Very challenging working environment.
I was involved and have been partly responsible for safe navigating of the vessel, transfer of personnel and cargos using small boats undershoot, close approaches and multi boat operations, coordinating multi chase boats operations. Up to 12 chase boats in the field.
I have been responsible for the co-ordination of helicopter flight program for the vessel in the field. This involved the movement of up to 90 people from shore to the vessel and to the shore. I was responsible for safety of the helicopters whilst airborne and the initialization of emergency response procedures in the event of an emergency involving a helicopter.
The upkeep of a flight log, POB list, ships log etc was also my responsibility.
Day to day communication to and from the vessel was also my responsibility and included VHF, UHF & HF radio, microwave and satellite systems and air band radio I had an emergency communications role onboard the ships Emergency Co-ordination Center in the event of an on board emergency.

Barber Ship Management & CGG 2001-2002
Second Officer
Working offshore USA, North Sea. Duties as for Barber Ship Management & PGS. I was involved in seismic operations, towing, recovering, deploying streamers, and replacing seismic gear with workboat, streamer maintenance, replacing sections. I was also involved in at sea refueling (bow refueling).

Athol Shipping 2000-2001
Second Officer
Passenger vessel operating worldwide. I was responsible for the safety of passengers, supervising and coordinating co-operation of all departments in port while on duty. Entertaining passengers during their stay on board, familiarizing passengers with the ship, upkeep of the accidents and injures log.

Green Refers 1997-2000
Second Officer
I took part in transporting frozen goods from Europe to USA and back. I was partly responsible for loading, stowing and discharging cargo, supervising temperatures of the cargo.

E&G Sorensen Co. 1996-1997
Chief Officer.
Supervising loaded cargo, calculating draft survey.

Good Faith Shipping 1996-1996
Second Officer.
5000 containers vessel. I took part in whole process of shipping containers from Asia to USA.

Tragopa Shipping 1994-1995
Employed as Third Officer on RO-RO vessel. Transporting cars and heavy lories, arranging those with dangerous cargo in accordance with the rules of IMDG code.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1201 to 1250 of 9905)

Go to Search Parameters...

Brief Description

Over 25 years of teaching practical and theoretical in the field of mechanical maintenance in the Philippines and Middle East

Twenty(20) years of experience in detail engineering/FEED/PMC of petrochemical complex/refinery/major industrial projects. 11 years wotking in middle east countrirs. Familiar with international codes and standards.

A highly experienced Pre-Commissioning, Commissioning, Start-Up and Field Engineer, Coordinator, Supervisor, Shut-Down planner, having worked on many varied projects Having a Degree – Marine Engineer, (Ship Engineer)

Proven ability to provide Industry initiative and leadership. 20 years of experience. Extensive SCADA, PLC, DCS and HMI Project Management Consulting knowledge.

Free! I am applying for the job posting in Fory McMurray with Sands Surveys 2000. I am fully qualified and looking forward to hearing from you. Please see my resume for my experience. I am available to start work when you need me to.

piping expert

Crane operator graduate skill full

Field Engineer

Passionate in programming (vb classic and .NET), Fluent in ENGLISH/ARABIC, Devoted Muslim

dcs panel operation for terminal and plant

GRADUATE DIPLOMA HOLDER (3 year fulltime study) in MECHANICAL ENGINEERING, having Certifications as SENIOR WELDING INSPECTOR (CSWIP 3.2) -TWI LONDON, NACE (USA) COATING INSPECTOR LEVEL 1 – CERTIFIED, NQA (UK London) Certificate of Training in ISO 9001-2000 QMS Auditor, ASNT LEVEL II-RT,UT,MT,PT

Petrophysicist, Log analyst

He is the Manager of Technology Development in Exploration & Production in the Corporate Direction of Strategic Planning of PEMEX. Previously, he was Well Productivity Manager in the Technology and Professional Development Vice-presidency of PEMEX Exploration & Production. Also, he has been the head

Sale and marketing experiences.

Comprehensive experience in contracts management and projects management, construction management, mechanical, maintenance and operations management, mainly oilfield and production plants.

QA/QC engineer/inspector in piping/pipeline and facilities construction in oil/gas. And an HND in welding/fabrication .

DCS Lead Engineer

IBM-Maximo Senior Consultant , Oracle eAM & ERP Consultant

over 8 year of experience as PDMS Administrator, Good programmer in PML2, customize PDMS to increase productivity, ability to work independently or in a team, ability to train and build a team of operators

Having 13+years of experience in refinery,fertilizer & petrochemical field which includes 5years in india and 8+yearsin kuwait.

Experienced Geophysicist

10 years in Geophysicist

B.Tech (Chemical) with 13 years 10 months experience

Having 13 years of exprience in maintenance construction and design field of all types of instruments in oil and gas industry.preference given for offshore / on shore ON/OFF duty jobs.

Chief Mate License with STCW 78/95 Convention, Bahamian Endorsement, Offshore Operators Certificate of Competence (CAA UK), Advanced DP Course,Basic Offshore Safety Induction end Emergency, Under Water Escape Training, Basic Safety end Emergency Preparedness,

Instrumentation engineer B.E (Electronics) with experience in Engineering /Design in the field of instrumentation. My experience in the sector of EPCM’s and E&P includes the supervision of different Oil and gas Projects in the upstream and downstream sector, incl: insta; Erection and commissioning

-I worked offshore in Nigeria and Brazilia on CCR Operator position

Have wide-ranging experience in Oil & gas (both Onshore & Offshore), refinery and petrochemical industries with good exposure towards Distributed Control Systems, Safeguarding Systems, Fire & Gas Systems and various types of Field Instruments.

I am a 3D PDS piping designer I work in various field of engineering, mostly oil & gas I have also knowledge in structural designing

Geologist, with 18 years of experience in the hydrocarbon sector, working in Venezuela, Trinidad and Tobago, Brazil and Mexico. Good command of computers. Experienced working and studying in a multicultural and diverse environment - Excellent interpersonal, communication and teamwork skills.

Degree: B.E. (Architect) Construction, Civil Works and Buildings expertise & HVAC installation.

Experienced Process Operator

21 Years Onshore and Offshore experience in the through knowledge in Welding and painting Heat treatment, hardness and NDT testing, Hydro testing of process piping in various construction projects and industries the Refinery projects Gas and oil separation project, Gas power and desalination plan

14 year experience in detail engineering of static equiment like pressure vessel, columns, heat exchangers and packages

Dear Madam/Sir

Looking forward to join an Organization where I can pursue a Successful career by utilizing my skills and abilities to the maximum extent with full potential.

Oil & Gas Lease Broker/Abstractor/Landman

Petroleum Economist

Over 17 years experience in Production & Planning Control. We r undertaking 250 shop floors.Currently I am working Manager in Europlastics-Malaysia.

As you will see from my CV & With my proven ability & experience to develop various studies, reports, calculation and design of instrumentation & control system and maintain the highest quality standards whilst also minimising costs.

I am an outward going person, easy going with strong family values. I have high standards, and am disciplined and methodical in the way I approach and carry out work.

An enthusiastic, hardworking and highly dedicated professional with more than 25 years proven International experience as a Saturation Diver/Clients Representative who initially commenced his professional diving career within the Royal Navy. Highly skilled with an in-depth knowledge of large to smal

Over 12 years of Piping detailed engineering experience in PDS-3D working Environment, exposure of SmartPlant Review, PDS-Piping Coordination, drafting tools AutoCAD/MicroStation, Piping stress analysis (static) by Caesar II, Piping material procurement and excellent skill in MS Office applications.

Experienced mechanical engineer, with 2 years of design and project / construction management of oil & gas and petrochemical industry.Extensively travelled and executed projects in Middle East, Caspion region and in East Africa.Excellent leadership, self-starter, intensively motivated competent.

Hands on experience on High Pressure Mobile Hydraulic Systems (Closed Loop & Open Loop Systems), which includes Variable & Fixed Displacement Hydraulic Pumps & Motors, Various types of Hydraulic Valves, Proportional Valves, and Electro Hydraulic Actuators, Hydraulic Cylinders.

Lead offshore structural engineer

Electrical Engineer with wide experience of erection, commissioning, troubleshooting and maintenance

Over Fourteen and half years of experience in Petroleum Refining & downstream process, Petrochemicals and Chemicals in the Field of Continuous Process plant Operations, Troubleshooting and Commissioning. Well versed in Normal Operation and Unit revamps, Gross root & Expansion of Crude Refinery Erect

Experienced Professional Mechanical Engineer with 15 years diverse professional experience in Oil & Gas Industry - Project/Design/Operations Engineering, Rotating & Static Equipment sizing and selection, Commissioning Activities, and associated technical skills.

Quality Assurance, Quality Control, Quality Management, Inspection, Operations, Design, ISO 9001, 14001 & OHSAS 18001

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 [ 25 ] 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out