Resume - Site Safety

Misco Jobs

Resume #71242

CONTACT INFORMATION:
View contact information...

OBJECTIVE A Safety Management or a Engineering position with a firm where my leadership in Safety Engineering and EPA expertise will impact business objectives.

Skills OSHA 500, Paramedic certified, First Aid, Fire,EPA Hazardous waste, air, DOT, and water treatment laws and regulations. Fluent with Lean manufacturing and Kiazan. Fluent with most all software and computers.

CAREER HISTORY Progressive growth as an Safety and Environmental Engineering with Production Manager since 1980. Steady growth from Engineer to manager.

WORK EXPERIENCE
MMR Group
Site Safety Manager Yuma, Arizona
New Peak Power Plant installation

JEA Energy Jacksonville, Florida
Site Safety Manager
New SCR Addition to existing St John's River Power Park

Sterling Boiler & Mechanical, Evansville, Indiana
Cooperate Safety Manager on the JEA SCR project in Jacksonville,
Florida-

Zachry Construction Corp
Site Safety Coordinator base crew and 2007 Fall Outage Gibson
Station Owensville Indiana

Sterling Boiler, Evansville, Indiana
Site Safety Coordinator 2007 Spring Outage Gibson Station
Owensville Indiana

AEP Power
Site Safety Coordinator 2006 Spring Outage West Virginal

Jeff Brown Inc
Site Safety Coordinator 2006 Fall Outage Texas

Duke Energy Corporation
Site Safety Manager for Duke on multiple sites in Indiana,
South Carolina, and Ohio

Young Touchstone
Safety, Engineer/Facilities Manager Jackson, Tennessee
* Ensure the plant is compliant with federal, state and site regulations pertaining O OSHA regulations
* Daily risk analysis for the prevention of lost time accidents
* Accident investigations and disciple due to lost time accidents or unsafe acts
* Developing and presentation of accident and safety programs
* Maintaining building and grounds.

Windsor Republic Doors
2001- 2005 Safety, Environmental/Engineering Manager McKenzie Tennessee Plant
* Responsible for plant compliance and training to OSHA regulations
* Maintaining all records for Safety and Environmental including proper reports and f fees required by OSHA and EPA.
* Develop plant polices and guide lines and training for accident prevention
* Labor issues and negotiations on contracts
* Plant layout designs, startups, and shutdowns
* Facility management, building and grounds, utilities, ect
* Process design and procedure documentation and operator training
* Creating budgets and cost reduction programs
* All EPA and OSHA compliance and prevention items and monthly reporting
* Electrical, electronic, hydraulic, pneumatic, and mechanical design and r o troubleshooting
* New Product research and design
* Process design and improvement
* Tooling design and modifications including stamping Progressive dies, blanking, turret press, roll forming, and press breaks
* Achievements: Completed a cost reduction that saved the company over two hundred and seventy thousand dollars annually on scrap. Increase of production by as much as twenty seven percent

1999 to 2001 Plant and Safety Manager, Dyersburg, Tennessee Plant
This position was for one year. I was to run the plant while also moving all the operations from the Dyersburg plant to the McKenzie plant.
Once I had complete the new layout of the McKenzie plant and had move all operations to the McKenzie and shut down Dyersburg, I than assumed the Plant Engineering and Safety Manager position at McKenzie

Continental General Tire Mt. Vernon Illinois Plant

1985- 1999 Quality Engineer
* On going continuous improvement in the product
* Customer on site trouble shooting and problem issues
* Design, implement, and enforcement of multiple quality processes.

1983 to 1985 Senior Safety and Designer Engineer
* New designs, ongoing modifications to reduce cost, improve quality and process time.
* Risk analysis for safety and accident prevention
* Equipment programming in CAD/CAM Achievements:
* Developed and designed process lines and procedures.
* Ensure the plant is compliant with OSHA, Federal and state regulations

1980 to 1983 Systems Engineer
* Overseeing the LAN and WAN networks
* Maintaining, building, and programming all PC and accessories
* Develop new systems and programs to support production

Dec 1979 to Jun 1980 FGM Architects and Engineers Mt. Vernon, Ill
* Building structural design
* Life Safety surveys to existing structures to determine if they are safe and meet all state and federal regulation
* Stress load analysis and design

EDUCATION & OSHA, EPA ISO 9000, CPK, SPC,
TRAINING Process Leader in LeanSigma Techniques (Kaizen) TBM
Emphasis in Architecture and Construction
Management Southern Illinois University
Course in SPC and CPK
IS0 9000 Implementation Course.

PERSONAL
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6551 to 6600 of 9906)

Go to Search Parameters...

Brief Description

Mechanical engineer-Masters-2 years experience as research assistant-proficient in development and usage of Finite element codes and packages-actively looking for a job.

The purpose of this resume is to define and highlights the skills and ability to work as a Planning Engineer. I secures 5 year of working exp. as Maint. Planning Engineer and Proj. Plan Engr. in Petroleum Refinery and for the const. of Pet.chem. & Steel Plant respectively.

B.S. CHEMICAL ENGINEERING UNIVERSIDAD METROPOLITANA, Caracas – Venezuela • Minor: “Oil/Gas & Petrochemicals, Production Engineering” • Graduation Date: February 2002 • GPA: 3.55 / 5.00 N°10 in 21 graduates.

• Excellent interpersonal skills • Excellent leadership abilities • Thorough individual with good analytical skills • MS Power Point presentation skills • 4 years experience spanning academia and industry

EXPERIENCED,WILLING TO EXPLORE AND GOOD TEAM PLAYER

B. Tech Applied Geophysics Second Class Upper Division Experience in seismic and well log interpretation, petrophysical calculation, volumetrics, Drawing of geologic cross-section. ·Drawing of Geologic cross-sections. Deep Operations Wellsite Geologist (MG Hulme Jr Rig)

Degrees in BSc(GEOLOGY) and BCom(FINANCE). Experience in E&P companies undertaking economic modelling, reservoir performance and completions, and development geology.

PRODUCTION/PROCESS/OPERATION ENGINEER

Bachelor of engineering degree in metallurgical and materials engineering (b.eng). grade: second class upper division.

Engineering background consisting of manufacturing, project organization, and design disciplines. Experience with factory and marine environments, office and fieldwork, and ability to interface with a variety of people.

A Chemical / Process Engineer

Over 5 years of experience in petroleum industry, including, but not limited to various aspects of management and monitoring of the oil fields, wide usage of environmental engineering, performing general overall supervision, conducting communication with vendors and consultants.

An engineering position with potential for professional growth and advancement.

Mechanical Field Engineer; 5 years experience; Industries: Construction, Oilfield Services & Transportation; Areas of Interest: R&D, Field Engineer, Project Management

Chemical/process engineer

Industrial Electrician / Instrumentation Technician / Infrared Thermographer

I am looking for a job as a wireline technician.

Seeking a long-term position in the field of Information Technology or Consulting where I can learn and grow in a fast paced and rewarding environment.

I worked in the oil industry in Venezuela for the last 5 years, facing constant challenges. I worked in Accounts Payable as a Finance Coordinator and in Procurement positions.

Working Experience with CADCENTERS PDMS and INTERGRAPHS PDS-3D in various aspects of Basic and Detail Engineering including Project Planning and Implementation right from Development of Plot Plan, Equipment Layout, Piping Layout, to Isometrics, Design Review and Material Take off.

I am now looking to apply my many skills in a pipe drafting position. And along with my drafting and field experience I am confident that my newly obtained skills in assisting fabrication coordination of this project will be of great use in the design phase of all future projects.

AutoCAD

Site Safety

I'm a reservoir engineer working for rashpetco(JV.of BG&EGPC)for the following topics:runing eclipse 100 simulation,kappa saphir wt analysis,prosper nodal analsis,mbal(MB software),gap(netwark),floviz,reservoir coupling,office,pvti,schudule,pss,petrel ,controlling the multi segmented wells

Landman 8 years, Texas & Oklahoma, Title, Leasing & Purchasing

I am Engineer, MBA, Speak 4 languages, Excellent Computer Knowledge, I have done several courses in the Petroleum Industry. I've worked in a Shell Petroleum Refinery in the Engineering Area, Inspection, Maintenance, and Projects. Also in Economy of the Refinery working on the MIS and KPIs.

Stakeholders Mgt, Social Impact assesmment, Negotiation skill, Participatory devt Planning, Monitoring/Evaluation, Team Player (B.Sc. M.Sc, Ph.D)

I am presently employed as a Builders Labourer and my duties include scaffolding, and steel fixing. As a Self Employed Diver I undertook mooring installations and sea bed surveys. I have previously worked offshore as a Production Mechanic.

I am a Petroleum Engineer that possesses technical expertise in petroleum economics evaluation, and reservoir engineering analysis with some reserves booking experience. In addition, I am very eloquent with Microsoft's office software and all windows environments.

Cuban Petroleum Engineer looking for work.

Auto CAD

As a Manager/Project Manager, I have over 12 years of experience managing various design build projects and services business in OEM, Pipeline and Water treatment industry

Executes design preparation and construction drawings of piping system and supports and pipeline design. Background demonstrates intensive exposure in conceptual design and studies, detailed designs, cadd drafting, isometric and general plan reviews, & MTO

Solid management experience in professional Procurement (purchasing, quality control and logistics)

Moniitoring and implementation of all related painting/coating/lining works involved in the construction packages managed under co project department.this also includes the major painting works associated with the major overhauling of crude oil storage tanks in oil and gas co under control environm

I am a chemical engineer with 15 year experienced in oil, gas processing and petrochemical plants (Polyethylene-LLDPE/HDPE/LDPE). Extensive experience in gas separation, purification, refrigeration, all type of compressors. Day to day activities of production plant and catalyst manufacturing.

7 years experience in the oil filed, (Mudlogger, Data engineer and a pressure engineer)

MBA - Analyst / Commercial / Supply Chain - Oil & Gas

The past 16 years has been in the Oil & Gas and Mine Industry, with the reminder being associated with the Onshore – Offshore Oil & Gas Plant industry. Experience has been gained in all aspects of Engineering Piping Design & drafting activities with the emphasize on piping plan, isometric, pipe spoo

Ten Years Of Effective Managerial/Sales Experience At The Professional Level

I am in a position to take full and independent charge of major plant overhauls related to boiler and its auxiliaries, intake equipment, fuel gas station and fuel oil handling station

Electrical Technician/Cell Phone Technician

Project Management

Electrical Engineer - Design and Estimation

Trouble-shooting of instrument like GC and HPLC analysis of raw, intermidiate and finish goods

Procurement, Supply Chain and Contracts Professional

Country/Sales Manager Africa

Oil and Gas Drilling Professional

Inspection of Oil & Gas, Refinery, Petrochemical plant and offshore field Static equipments, Welding, piping, pipelines, painting& coating and NDT.

• Research, design, evaluate, install, operate, and maintain mechanical products, equipment, systems and processes to meet requirements, applying knowledge of engineering principles

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 [ 132 ] 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out