Resume - Production/Process/Panel Operator in Oil & Gas upstream Industry.

Misco Jobs

Resume #71335

CONTACT INFORMATION:
View contact information...

To obtain a meaningful and challenging position that enables me to learn the Oil & Gas Operations (Production) and allows for advancement. Where I be able to utilize my knowledge, skills and exceptional ability in an organization, which offers opportunities for personal growth and career development that support to learn new technologies and to work in a dynamic environment.

„Ä Highly competitive, self starter, organized, discipline and goal oriented.
„Ä Ability to work with people of diverse backgrounds.
„Ä Open and honest relationships at all levels, facilitating challenge and developing trust and respect in the workplace.
„Ä I have excellent abilities to maintain documentation and records.
„Ä Welcome the challenge of solving problems.
„Ä Strong interpersonal skills & excellent communication skills
„Ä Fully understand & demonstrate compliance with company HSE (Health, Safety & Environment) policies, standards, codes and procedures.
„Ä Have excellent knowledge about Permit to Work system and Task Risk Assessment system.

I have worked 6 years in BP Pakistan Exploration and Production, Inc (Formerly known as Union Texas Pakistan) in Badin District (Pakistan) as General Filed Operator, Production Operator-I & Production Operator-II from July, 2000 to June 2006. Throughout my 6 years experience I have worked on following process units.
„X Wellhead Operations.
„X Gas Dehydration System
„X Glycol Regeneration System.
„X Separation of Gas, Oil and Water (LP & HP Separators).
„X Oil Desalting Unit & Condensate stabilization.
„X Oil Shipment & Tank Farm.
„X Water Injection and Disposal System.
„X Analysis of Water Injection and maintaining its quality.
„X Jet Pump Operations (Artificial Lift).
„X Power Generation and Distribution System.
„X Positive Displacement (Reciprocating) & Centrifugal Pumps Operations.
„X Instrument Air Compression and Dehydration System.
„X PLC Systems for safe Operations of Remote Facilities.
„X Millennium Controller for safe Operations of Jet Pumps (Artificial Lift) and Gas
Compressors
„X Have an Excellent approach on P&IDs, PFDs and Emergency Response
Procedures.
„X Down Hole and Surface Chemical Injection.
„X Well Testing and preparing test reports.
„X Analysis and Measurement of Oil.
„X Gas Compressors and Transmission.
„X Shutdown and commissioning of oil and gas plants.
„X Worked on PLC system.
„X SCADA Operating Systems etc.

Joined OMV (Pakistan) G.m.b.H at Kadanwari Gas Facility since July, 2006 as Wellhead Operator / Production Operator and now working on following areas.

„X Wellhead Operations.
„X Well Testing.
„X Power Generation and Distribution System.
„X PLC based control room operations.
„X Control room operation with SCADA in touch TNT paragon factory link.
„X Wellhead telemetry system/RTU and hydraulic panel operation.
„X Slug catcher /Test separators.
„X Inlet separator /Pre-treatment.
„X Membrane operation for removal of CO2.
„X Catalyst bed using zinc oxide to remove H2S.
„X Dew point control.
„X Sale gas fiscal metering and on line analysis.
„X Two stage double acting instrument air compressors.
„X Water treatment, Fire water system.
„X Reciprocating Gas Compressor
„X etc

* Master of Science (M.Sc) (Computer Science) in 2001 from University of Sindh, Jamshoro, Pakistan.

* Bachelors of Science (B.Sc) (Computer Science) in 2001 from University of Sindh, Jamshoro, Pakistan.

* (Intermediate) Higher Secondary School Certificate (HSC) in 1996.

Academic:

* (Matriculation) Secondary School Certificate (SSC) in
1994.

* Microsoft Windows Operating Systems
* Excellent Skills Of MS Office
- MS Word
- MS Excel
- MS Power Point etc.
* Internet Browsing and E-mail
* Computer Programming Languages
* SCADA Softwares (Rockwell Software) etc.
Computer Skills:

Multinational Oil & Gas Company related to my work experience and qualifications.

I have attended and successfully passed following Technical & Safety training courses.
„X Field Trainee Course.
„X Production Operator-I Course.
„X Production Operator-II Course.
„X Surface Production Operation course.
„X Permit to work & TRA Training Courses.
„X BP's 8 Golden Safety Rules Training.
„X Authorized Gas tester Training.
„X Environmental Awareness Training.
„X Jet pump operation.
„X Hazard Identification Training Course.
„X Vibration Monitoring Technology Overview Training.
„X Fire and Safety Training.
„X Power of Positive Attitude training.
„X First Aid Training Course.
„X H2S Awareness Training.
„X SCADA Training by Innovative Automation & Engineering Pvt. Ltd.
„X Defensive Driving Course by Consult & Train Corporation.
„X Introduction to Oil & Gas Training by OMV (Pakistan) G.m.b.H
„X Emergency Rescue and On Scene Commander Training.

Father's Name: Muhammad Hanif Arain
Date of Birth: 09th July, 1977
Gender: Male
Marital Status: Married
Nationality: Pakistani
Languages Known: English, Urdu, Punjabi and Sindhi
Permanent Address: Post Office Budho Qambrani,
Talka: (Matli), Distt. (Badin), Village
Haji Rehmattullah Arain
Hobbies: Reading Books & Newspaper, Listening Music, Internet
Browsing, Watching movies, Cricket.

References will be available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1801 to 1850 of 9901)

Go to Search Parameters...

Brief Description

12 + YEARS OF EXPERIENCE IN BOILER, BOILER AUXILIARIES - DESIGN AND DETAIL ENGINEERING

SUMMARY: Health, Safety and Environmental Management Professional seeking a challenging position in an established and dynamic organization. With about 8 years experience with the oil and Gas industry and with good Experiences in Environmental management, project management, Regulatory compliance

Senior Structural Engineer with 12 years experience in offshore structural engineering. Able to lead, forecast and allocate structural engineering resources and possesses conceptual to detailed design experiences in brown and green field projects.

12 years of expereience in medical emergencies,7 years expereience as offshore rig medic, 2 years as trainee HSE

Can setup run &standardise petroleu testing lab. Familiar with all petrleum product testings, full acquainted with ISO-9002 Quality assurance system & with MS Office & email/internet applications. Accredited as Petroleum Inspector from IFIA, UK. Neatness, accuracy, thoroughness in work

I am experienced in Air separation Units (Oxygen plants, Nitrogen plants, Argon plants) and Carbon dioxide plants. I am a plant manager and looking after all the activities involving in mafucturing and selling

I have over ten (10) years of diversified experience in Planning & Scheduling, site supervisory ,quality control and other related engineering job on EPIC projects including Structural, process mechanical, mechanical piping, electrical, instrumentation, telecommunication and fire & gas systems.

I am Diploma Engineer in electrical and post diploma holder in Instrumentataion & control having 28 years experience in petro chemical, Heavy chemical , Oil & gas industries in a diffr\erent position in project, maintenance of instrumentation.

Considerable expertise in dealing with corrosion control of oil and gas installations, resulting from over twenty years of relevant experience in upstream, midstream and downstream activities in oil and gas industry.

With very strong drilling background, I will be competent for any drilling related job assigned

To secure a Senior Contracts/Management related position within an internationally focused organization servicing the petroleum, mining, construction or telecommunications industry utilizing my negotiation, management and administration skills.

A dedicated, trustworthy and competent Offshore Medic. Accepts responsibilities and perform them willingly and with efficiency. High motivation and high moral and ethical standards are personal trademarks. Has good public relation skill. Excellent to read, write and communicate in English.

Bachelor Engineering Degree, BSC Geology, 10 years oilfield experience, Mud Engineer, Data Engineer, Geologist and Reservoir Engineer

Project Execution of EHVAC and HVDC Electrical Power Transmission as EPC contractor having direct experience of Engineering, Project Management, Procurement, Installation and Commissioning of Indian and Overseas projects.

Welding Technologies, Technical assistance, Workshop, site, AutoCAD, Tekla Structures, XSteel, SolidWorks, MS Project

Experienced Instrumentation & Control system Engineer, interest in Projects, Proposals and Commissioning

Operates processes in the plant and handled control room DCS or PLC, mostly equipment such waste gas treatment plant, waste water treatment plant, chiller, air compressor, kneader, calciner, cooling tower, furnace and knowledge in the tank farm activities, some analysis required in the process

Control Room Operator (DCS)Honeywell Chief Operator/Step-up Chief Operator Honeywell TDC2000/3000/Plantscape Refinery Unit Trainer - Classroom/OJT Technical Writer/Author (Procedures) Refinery Unit Start-up/Shut Down Commission New Equipment/Processes Precommissioning Coordinator Safety

Dear Sir/Madam: My goal is to obtain a entry level position in a drilling crew in offshore, anywhere around the world.

For over 15 years, I have worked in various oil companies throughout the world. As such, I have possessed expert level skills in testing and analysis of petroleum related products, including oil, gas, water, boilers and environmental samples using sophisticated analytical equipment.

I have 12 years experience in drilling oil wells(development and exploration) and operation monitering. I have a bachelors degree in mechanical engineering.

My experience goes trough a range of fifteen years in the Latin American Electric Service sector, most of them in a private Electric Utility with operations in Venezuela, El Salvador and Colombia.

Drilling/Energy Professional, functional/technical business experience on IT, project management, operations, sales, supplier summit, strategic development. Oracle Certified Professional (OCP) DBA and EIT Texas. Strengths - drilling, workover, Petroleum engineering, IT implementation, Oracle

Himanshu Parikh have done B.E in power Electronics in 1997 and started professional career in Industrial control system. During these 10 years I have worked for automation products of Yokogawa, Invensys (Foxboro), Rockwell & ABB and inverters of Reliance Electric & Vacon.

SCADA and RTU for Electricity and Water

1997 I am joint as schlumberger company in batam.as warehouse man.2001 transfer to jakarta this same company as field operator.2003 as crew barge for java sea for other job:cementing job,stimulation job,and filtration job.

automobile engineer

Become an expert in the field of Computer & Information Technology and hold a high position with broad decision-making authority

Production/Process/Panel Operator in Oil & Gas upstream Industry.

I am a Diploma holder in Mechanical Engineering; I am looking for a Mechanical Draftsman job

I apply a night drilling supervisor or drilling manager equivalent position. I am an Engineer having Geology formation and training courses in drilling and completion. Since 1997 , I am working in the oil drilling domain/

I am a Petrophysicist with 8 years experience

Ph.D (Chemical Engineering), from Indian Institute of Technology Delhi, India.

Project Planning, schaduling, Monitoring & Control

Certify Valve Maintenance Personnel, Mechanical engineer/Instrumentation Certified/Project Managment Certified .

10 YRS EXP IN TERMINAL OPERATIONS

reservoir engineer

Material and logistics handling Specially Drillings materials

Twelve years of progressive petroleum engineering experience. The past five years I worked as a Completion/Operations Engineer.

Reservoir simulation, numerical methods, mesh generation for complex geological media

Proficient with EPC contracts focus on Oil & Gas, Petrochemical Projects.

Inspection Technician Mechanical in FFBL Fauji Fertilizer Bin Qasim Ltd. (Formerly FJFC) Karachi Pakistan

15 years experience Seismic HSE Operations

Industrial Engineering, 12 years experience in Projects Management, Tenders Management, QA/QC & Planning in Offshore & Near Shore Oil & Gas Projects

I am familiar with almost all of Occupational Health and Safety (OSHA) Rules and regulations for:

A Professional Engineer in the field of Instrumentation & Control Engineering for Oil, Refinery, Gas, Power Sector and Process units control systems. Having 11+ years professional experience in the EPC Contract for turnkey Projects handling Installation of Instrumentation and Industrial Proces

Environmental, Health and Safety Specialist and Industrial Hygienist experienced and Certified by the Board of Certified Safety Professioals

Geoframe data loading (2d,3d, well data), Geoquest software support (Charisma, CPS, and Finder), Project management, Unix Environment.

3 Years Mechanical Engineering Course with First Class passed in 1987 from India.

Multiskilled instrument & control tech, experienced in oil & gas. Excellent computer skills with hands on experience in maximo system.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 [ 37 ] 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out