Resume - Seeking Managerial or Supervisory position in Logistics & Transportation.

Misco Jobs

Resume #71613

CONTACT INFORMATION:
View contact information...

Experience

* June 2006 – To Present
DB Schenker Logistics
Bechtel & Co. LLC, Muscat and Sohar, Sultanate of Oman

* Freight Forwarding & Logistics Implant Coordinator for Bechtel on the Sohar Aluminium Smelter Project in Oman.

Duties included:
- Coordinating shipments with vendors, freight forwarder, local customs broker and local transporters.
- Reviewing, approving and preparing shipping documentation for the Oman duty exemption process.
- Updating shipping status in Bechtel's BPS software (Bechtel Procurement System).
- Preparing daily shipment status report.
- Assisting in preparing weekly and monthly reports – shipment status, freight budget, project metric, container and insurance reports.
- Providing freight estimates.
- Preparing and expediting import permits for the Ministry of Environment in reference to hazardous materials.
- Participating in daily teleconferences with local Customs Broker and Freight Forwarder.
- Monitoring containers movements.

We handled the transport of over 190,000 metric tons (630,000 freight tons) of material to jobsite which began in April, 2006. This consisted of over 4,500 SCN's (domestic and international shipments), 4,300 container movements, breakbulk, RoRo and over 300 air freight shipments.

* July 2005 – June 2006
Kuehne + Nagel Logistics, Jebel Ali Free Zone, Dubai, UAE

* Logistics Operations Manager- 3rd Party Logistics

Managed KN facility in Jebel Ali Free Zone, facility consisting 14000 square meters covered warehouse 7000 square meters were break bulk storage, other 7000 square meters provided with racking facility, 3500 pallets locations out of that 2300 pallets locations with temperature climate control system and the remaining 2700 pallets locations were for general cargo storage.

Arranged the customs clearance for inbound and outbound shipments to KN 3PL facility, managed and controlled stock movements at warehouse per client requirements, provide them with all the value added services, performed regular stocks check.

Managed team of 29 employees handled the daily activities at KN facility.

Duties included:
- Preparing presentations about the operations and warehouse facility.
- Preparing reports on activities, incomes, financial reports and compares it with the available budget and provides the reasons if there were any big variance.
- Analyzing and controlling the activities at the warehouse, distribution and logistics center.
- Planning all activities at warehouse based on clients requirements based on the capacity of the warehouse, recruit personnel and to oversee their training.
- Calculating and analyzing the costing of new business and sup contracts ( 4PL )
- Preparing and reviewing the contracts.
- Providing the prices and the calculations for RFQ's in regard of the warehousing & all transport methods (Air, Sea & Land)
- Preparing reports for number of movements, volume, tonnage and the performance (Metric reports)
- Studying the situation on regular bases, preparing activities plans to guarantee smooth operations and to cover the expansion to any expecting new business.
- Coordinating proper plan to load and offload heavy lift shipments bearing in mind safety in the first place and costs.
- Calculating the required man power and man hours for any business.

Accounts Handled:

- Fluor Amec (US Army):
KN was contracted to transport certain materials from UAE to 22 cities in Iraq, we coordinated with vendors and transporters to collect and consolidate materials at KN facility, check/examine cargos item by item and update the client if there were any discrepancies, re pack materials, loading materials for each city in convoys and customs clear it by using the customs duty exception agreement.
- Al Ghurair Project:
Coordinated 240 truck loads of School supplies to different cities across Iraq.
- KPR (US Army):
We handled many KPR's shipments from Jebel Ali to Iraq after obtaining the approvals from the concerned authorities in UAE as well as the permits from customs as special procedures were required for such cargos.
- Philips Middle East - House Appliances Division.
- Pilot Pen- Middle East.
They had approximately 240 SKU's.
- Toy Triangle – the agent for New Boy in the Middle East
They had approximately 300 SKU's.
- Marriot Hotels amenities supplies( Hotel Logistics)
We handled the supply chain activities for Marriott Hotels in the Middle East.
- Seven Seas
Computers parts supplies in UAE.
- Middle East Enterprises
Textile fashion Company for famous brands like Guess, U2, Esprit & Red Earth

* January 2004 – June 2005
Kuehne + Nagel Logistics, Jebel Ali Free Zone, Dubai, UAE
* Key Account Manager

* October 2002 – December 2003
Kuehne + Nagel Logistics, Jebel Ali Free Zone, Dubai, UAE
* Customer Service Representative

* July 2002 – September 2002
Shipa Textiles CO, Dubai, UAE
* Public Accountant

Education
B.Sc., Accounting/Business Administration, AN-Najah National University, Palestine, 2001

Computer Skills
- MS Office Word & Excel 97/XP/2003
- MS Power Point 97/XP/2003
- MS Front Page 97/XP/2003
- Bechtel Procurement System-BPS
- WMS – Warehouse Management System
- TMS – Transport Management System
- SAP

Training Courses:
- Al Shamel in Accounting (Accounting Software)
- E-clearance and E-mirsal customs clearing online from port Rashid
- Attended TLS Middle East Congress on 5th & 6th Dec 2006 which was about Supply Chain Management and Logistics Provider
- Quality Assurance
- Currently studying to get a Certification in Transportation & Logistics (CTL) from the American Society of Transportation & Logistics INC.

Languages
* English
* Arabic

Personal Information
- Date of Birth April 7, 1978
- Nationality Jordanian
- Marital Status Married

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7751 to 7800 of 9785)

Go to Search Parameters...

Brief Description

Experienced with Electronic Flow Computers along with having the basic knowledge of gas chromatographs, samplers, moisture analyzers and ultra-sonic flow meters. Along with experience installing and troubleshooting 900 MHZ, cellular, microwave, satellite and two-way radio systems.

A highly motivated individual who strives for success. Detail oriented with limitless learning capabilities. Capable of working under stressful measures while always committed to meeting deadlines. Exhibits strong leadership abilities.

Dear Sirs, i want to find any job possibilities with your company

I am looking for full time employment in a general labourer capacity

14 years of experience in steel structures detailing and checking. I know the tools Auto CAD, X-Steel and Micro station for detailing the jobs. Now, working in Aumund Engineering Pvt. Ltd. as a Sr. engineer. my responsiblitie is to lead team for detailing.

Technical manager of Construction & Services Companies - Manages all the company activities, adiministratives excluded.

Experience in residential and commercial maintenance, landscape labor, cable laying, pipes, mechanical assembly for harley davidson, and seafood processing.

Confined Spaces Certification, Radio Operators Certification, S100 Forest Firefighting Training & Chainsaw Operation , Common Core Skidder Operator , TDG (Transporting Dangerous Goods), WHIMIS, & WDHP, Standard First Aid & Heart Saver CPR, Fork Lift Operation, H2O Alive Certification

DCS, ESD, SCADA design and commissioning, expertise in field instruments design and commissioning

9 Years Mining experience, Overhead Crane Operator, Driver, Entry Level Job Seeker

Sr. PDS Piping Designer, Chemical, Petrochemical, Slurry esperience. Very strong in ALL elements of PDS including administration and support.

Knowledge of engineering theories and practices and an understanding of environmental principles involves with exploration, drilling, production and development operations.

Completion - Well Testing supv, Wireline logging engineer

Good understanding of power/load calculation, drawing of wiring diagram, trouble shooting, installation of electric motor, contactor circuit, transformator and PLC

I am looking for a full time position within the oil and gas industry preferably as I am studying land administration in school.

10+ years expereince in accounting, tax, audit. Expert in implementing MYOB Accounting

Graduate Civil Engineer with 13 years of experience in construction and Readymix concrete

Comfortable to work as Research Executive, System Analyst, Training Coordinator, Admin Officer

I am a safety practitioner with wide experience in construction, mining, dredging and marine, onshore drilling, etc. I have a good knowledge in MS Word, MS Excel and MS Powerpoint.

I have 12 years experience with working as a Diesel Fitter Mechanic, I am completly confident with working indepently or as part of a team. I have a certificate in HV mechanical & Electronic Systems, Maintenance and Repair.

Millwright/Industrial mechanic and industrial construction mauntenance mechanic

Materialsman/Coordinator with 10 year experiance of oil field, Supply base, Offshore Rig and Land Rigs

Procurement / Logistic Supply Chain Consultant

Professional 15 years experience in geotech and geology with engineering consultancy and construction company with various responsible position.

Power Transmission Line & Lighting of Highways, Electrical Design & Low Voltage, Electromagnetic Field

17 years safety experience, Grad Dip OHM, MSIA, (RSP Australia), Trainer

Piping designer

industrial instrument mechanic/building automation

Production Accounting, Process Optimization and Monitoring

19 years in Oil and Petrochemical with Project Management, Commissioning and Maintenance/Reliability background as well as all associated mechanical equipment and safety system. BS in ME and MS in Engineering Science. in English and Mandarin.

Seeking Managerial or Supervisory position in Logistics & Transportation.

An experienced Rig Mechanic with high level knowledge on Mining industry

Experience in Automation Systems (Triconex Safety Control Systems, Honeywell FSC). Bachelor of Telecom/Control Systems Engineering. Experience in GCC countries. Currently working as an Application Engineer

23 Years of Various field of accounting

Director

I would like to apply for Engineer or any kind position which is suitable with my education background and experience. I graduated from Trisakti University majoring in Mechanical Engineering with GPA: 2.80 (scale of 4.00) in 1998. I offer skills through formal education and experiences.

Analytical skills to improve methods and procedures applying ESP and Gas Lift systems to develop exploratory well completions, workover jobs, water control, and general oil field operations. Knowledge of modern well construction (completions) operations and techniques.

I am mechanical engineer graduated in 1997 in Simon Bolivar University, Venezuela. I have five years experience in drilling operations. I have experience in HPHT, directional, high angle, exploration, onshore and offshore wells.

An Engineer working at Alcatel Egypt, S.A.E. MND division. Looking forward to change my carrier from telecommunication to Petroleum/ Gas/ oil. I am very energetic, willing to learn and have a very good team spirit. I love challenge and can work in any working environment and conditions.

I am a young man who has worked hard all and received little for his efforts, and what I have received is gone. I am looking for a new start in a new line of work that is more profitable than those jobs I have had in the past.

Radio telecommunications operator based in Amman/Jordan , have various work experience in coastal radio stations, on ships board, united nations . total experience over 5-years . Looking for good opportunity in oil/gas offshore, onshore projects : world-wide as RADIO OPERATOR

Shift Supervisor Shift Foreman Plant Operator

working in French company named Air liquide as a manager sales & customer support since 1998. This company is in the industrial gases . I am searching job in the same field. Any Cryogenic Company Interested Please call me.

„« More than 11 years of professional working experience in an Oil/Gas, Petrochemical, & Electro-Mechanical Construction Industry; experienced in development implementation, quality, supervisions and inspections.

B.S. in Mechanical Engineering, 14 years of experience from inception to completion of HVAC design and construction in commercial building (high-rise, shopping mall), pharmaceutical, laboratories, clean room, and hospitals.

Electric connection, changing bolt in the diaphragm in turbena source of the electric energy

I have been working in the Safety, Health and Environmental (SHE) field for more than 9 years. Throughout these years I have been exposed to various SHE related requirements and problems. One of my key competency area will be managing workplace day-to-day safety, health and environment issues and

b.e(industrial electronics),skills are worked on siemens/abb plc,ac & dc drives,troubleshooting ,hydraullic know how,pneumatic know howsiemens drive,lenze drive,ac & d motors and their controlling,worked over software like cmms,icam,matlab,autocad,orcad,software used in equipment/machineries.

Installation, maintenance and repair of medical equipments

Self motivating person,Hard worker,Always ready to work

First Prev 151 152 153 154 155 [ 156 ] 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out