Resume - Seeking an opportunity to work in a professionally managed organization

Misco Jobs

Resume #71819

CONTACT INFORMATION:
View contact information...

Professional Experience
1. Presently I am working with Al-Khathlan Construction Company contactor for Saudi Aramco at Rabigh Oil Refinery since Nov 2007 to Present Date as a Quality Control Inspector.
Responsibilities:

„« Quality Control in respect of Process and ISO 9001: 2000 requirements.
„« To manage / improve the effectiveness of Quality Management Systems with in the facility, in the way that customer requirements are fulfilling.
„« To conduct Internal Audits on quarterly basis to find / remove weaknesses of the system and present Audit Findings for Management Review.
„« To prevent Customer Complaints by taking Corrective and Preventive actions and handle customer complaints effectively by finding / analyzing to the root causes.
„« Calibration of all the instruments used at Electrical floors.
„« Review Construction Schedules, Maintenance Work Orders, Daily Work Schedules, Inspection Schedules, that pertain to electrical work and plant/facility modifications
„« Maintain a daily log book of inspection activities
„« Sending Request for Inspection (RFI) to Saudi Aramco Inspector.
„« Inspect all work to the latest codes and standards and approved drawings and if construction group not follow the customer standards give him Non-Conformance Report (NCR).
„« Material Handling, Receiving and Storage for Conduit, Cable Tray, Cable, Mcc, Motors and Transformer.
„« Inspect Electrical materials like Conduit, Cable Tray. Mcc, Motors and Transformer shall conform to all applicable requirements, standards, and specifications prior to release to be used as part of the work.
„« Enclosures for covers, conduit seals and drains.
„« Integrity of the ground grid system and equipment grounds Inspection of prior to be used for Contraction.
„« PPM Level report: This report on monthly basis mentions the total process, material consumed, defects / rejection occurrence and cost of quality.

2. I work with ¡* M/S Nadia Textile Site Area Karachi since Dec 2006 to Present Date as a Shift Supervisor Electrical in Karachi Pakistan.

Major Responsibilities
„« Monitoring, maintenance and trouble shooting of Electrical System.
„« Responsible for the monitoring, maintenance and trouble shooting of 3 Phase AC motors and control system.
„« Responsible for the monitoring, maintenance and troubleshooting of different electrical equipments e.g. Burner, Contactors, Timer, Limit Switches, sensors, etc.
„« Installation of Lighting System and Cable laying as per requirements and relevant International standards like IEEE.
„« Inspection during delivery and Installation of new machines as per manufacturer's procedure.
„« Review existing designs and system for continual improvements.
„« Responsible for the technical and administrative functions of the shift's electrical team.

3. I worked with Al-Majal Services Master at Jeddah Saudi Arab as an Electrical Supervisor this maintenances Company since Dec 2002 to Nov 2006.

Major Responsibilities

„« Monitoring and maintenance of the bank's electrical system including Automated Teller Machine (ATMs).
„« Assisted in IT works and maintenance for ATMs including CCTV's and DVR for the security system and data processing as per standard or requirements.
„« Responsible for the daily work schedule planning and allocation to technicians and time sheet monitoring.
„« Receiving and analyzing customer complaints and request and making sure it was properly addressed.
„« Trouble shooting and maintenance of Alcatel Central Telephone system.

I worked with M/S EMIRATE PETROCHEMICAL SERVICES at Ruwais Abu- Dhabi as Electrical Technician from April 2000 to May 2002
Major Responsibilities

„« Maintenance and monitoring of AC motors.
„« Installation of Lighting systems and groundings of the facilities.
„« Responsible for the electrical wiring installation and cable laying in compliance with the standard.
„« Ensure that the cable splicing and termination works are carried out as per manufacturer's instructions only. He shall be responsible for all documentations, test reports, material certificates etc.
„« Ensure that cable trench, Cable tray, wire ways, fittings and accessories including saddles, cleats and bolting materials shall comply with the requirements of the drawings and relevant standards.

4. I worked with ¡* M/S SAJAZ VISION¡¨ as an Electrical QC Inspector since Dec 1997 to Feb 2000 in Nairobi, Kenya.
Major Responsibilities

„« Carry out inspections and release hold points by signing of inspection checklists and records as a documentary evidence of inspection conforming to the specifications.
„« Conduct daily site inspection and monitoring and coordinate with the concerned construction group for the correction of the problem if encountered.
„« Coordinate with the site foremen (Electrical) and project safety officer. We are jointly and severally responsible for the observance of all safety precautions required by the company safety plan and where applicable to the manufacturers as well as client's safety requirements, construction safety manuals (CSM) and other requirements.
„« Assisted the QC Supervisor for the review all quality related documents, material certificates and non conformances prior to take any decisions and/or actions in coordination with the QA/QC Manager.
„« Make sure that all electrical work for the installation of tri sign boards for advertisement purposes were complying with the electrical Grounding System and safety standards.
„« Prior to the installation of cable, make sure to check and ensure that the conduit runs installation is completed, securely fastened, smoothly cleaned, and free from damage. When all standard requirements are met, then cable installation may proceed.

HAVING VERY GOOD COMMAND OVER THE FOLLOWING:
Operating Systems Hardware Used

„Ï Router & Switches „Ï Desktop(s)/Laptop(s)
„Ï Windows ME „Ï Windows XP
„Ï Windows Vista

Professional Training
„« First Aid Course from Pakistan Marine Academy.
„« Fire Fighting Course from Pakistan Marine Academy.
„« Personal Safety and Social Responsibilities from Pakistan Marine Academy
„« Proficiency in Personal Survival Techniques from Pakistan Marine Academy.
„« ISO 9001-2000 Awareness Training.

Education
„« Intermediate Gov-Degree Sciences, Karachi, Pakistan.
„« Diploma In Electrical From YMCA Poly Technical Institute, Karachi, Pakistan.
Achievements
„« Employee of the Month at Al-Majal Service Master, Taif-Kingdom of Saudi Arabia
„« Employee of the Month at Saudi British Bank, Taif-Kingdom of Saudi Arabia.
„« Employee of the Month at National Commercial Bank, Taif-Kingdom of Saudi Arabia.

Personal Profile
Date of Birth: March 10, 1974
Marital Status: Single
Nationality: Pakistani
Religion: Islam
Languages: Urdu, English, Arabic
License: Valid Driving License Kingdom of Saudi Arabia

Reference will be furnished upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2901 to 2950 of 9785)

Go to Search Parameters...

Brief Description

Experienced Contracts Engineer with more than 15 years of experience

German R. Leal Mechanical engineer with 15 years industrial experience in Petrochemical and Oil Plants. HRSG Boiler/Plant. Piping Engineering and Design (PI&D), Flow Sheet, Plot Plan. ASME B31.1;3, 5,8, 11 ASME BPV Sect VIII. Stress Analysis CAEPIPE, Auto Pipe.

PhD candidate with experience in hardrock and softrock

plant operations/project management in power, petrochemical industry

Extensively experienced with the specification, bid evaluation and purchasing of mechanical equipment and pipelines.

I am smart Lithuanian male, strong wide profile IT specialist with more than 15 years related experience and searching for the position in IT sector, where my experience and strong background in computer science can be best utilized. My main personal qualities is: calm, disciplined, communicable.

12 years oil&gas experience geologist& mudlogger,8 years environmental scientist, MS&BS Degrees in Geology, recent education includes 32 semester hours of business and computer courses, 1989&90, 3.7GPA, 20 semester hours of graduate courses in environmental science, 1997, 4.0GPA

Seeking an opportunity to work in a professionally managed organization

Control System Hardware Design for DeltaV/ DCS

Subsea Pipeline Engineer with experience in the field of engineering (FEED & Detailed Design), material, installation and cost estimation.

Construction, Commissioning and Operation & Maintenance procedures including emergency response procedures in line with best industry practices and based on approved applicable standards, Engineering for Procurement, vendor drawing review, site co-ordination and supervision, installation and commiss

Based on my experiences and knowledge in implementing the safety procedures and teaching the safety techniques in working safely, I'm very confident to be a part of your good office. I promise to help your company Incident Injury-Free

M.SC chemistry with painting inspection experience

I am a Qualified and experienced NDT INSPECTOR with ASNT LEVELII, and Diploma in mechanical enginner

Around 7.0 years of experience in design & construction of power plant structures, EHV indoor and outdoor sub-stations, industrial & residential structures.

Aspen 12.1, Pro II, HYSIS, DMC, CONTROL STATION

I have a wide knowledge of on & offshore,gas, petrochemical and marine electrical systems.this knowledge and experience in conjunction with my professional qualifications combine to offer any potential employer the benefits of a well rounded and knowledgeable individual. Valid 4 Year Australian Visa

Reservoir engineer

Remote Sensing, GIS and Photogrammetry (M.Sc Remote Sensing)

I am working with Reliance Industries Ltd. [ Refinary Division ] since 2001. My responsibility is Panel operaton.

Work as HSE supervisor

7 years working experience in Logistic, roven hands-on experience in many different logistic areas, from Project Planning, Development and Implementation, HSE regulations, Financial Administration, HR management, Purchasing and Supply chain, Warehouse processes and Transports, Camps and Offices set

Inspecton & certification of coating work

Coil Tubing/ Petroleum Engineer/Supervisor )

I have 15 years experience inpetrochemical plant.

organize fire department,good knowledge of fire fighting, organise periodic testing and maintenance of fire equipments.

A highly motivated, team spirited and performance driven engineering professional with an extraordinary blend of experience in Petroleum refining industry. Recognized for keen ability for improvement in reliability of a wide range of static equipment like crude oil heaters, high temperature hydrogen

I am at present looking for the Driller position. I have worked in the drilling industry for some 11 years

Electrical, planning and IT

PDS, PDMS, Smart Plant Review, navis work

Certified Internal Auditor, international auditor

Chief elecrician !!!

Material Management, Inventory control, Procurement, follow-up,Procurement Planning etc

A visionary executive with 16 years experience and proven history of outstanding performance in Industrial automation & Instrumentation in Project Design, Application and Development. Dynamic, skilled specialist with excellent record in Power, Refinery, Oil & Gas, Polyester, propylene, Pulp-Paper

Mechanical Engineering Technologist

Well logging, seismic data interpreting, sea mapping

To utilize my broad skills and experience in offshore and onshore oil and gas installation for process control instrumentation and electrical maintenance.

Medic wityh 14 years experience

Bachelors degree in Civil Engineering with more than 15 years experience in project engineering, construction and project controls with international exposure in oil and gas sector and other areas which encompasses the functions of planning, budgeting, scheduling, schedule controlling.

My skills:Experienced Project Document Control Supervisor working on large-scale on-shore/off-shore projects past 8years. Experienced in handling design/vendor packages, expediting of subcontractor’s package, Document Control, scheduling, progress reporting, good communication skills

Operations Manager, Barge Master, Barge Captain, Master Mariner, Rigging and Scaffolding Supervisor, Crane Operator.

Senior Contracts Manager - 25+ yrs experience in Power Plants, Airports, Water Treatment Plants, Major Civils and pipeline projects in Malaysia, Pakistan, Gibraltar, UK. Contract preparation and management ( EPC & Supplier )plus broad knowledge of planning, costs controls and project mamagement.

An adaptable Materials Controller with specialist strengths gained onshore, offshore and overseas. Supervisory and hands-on experience, with the ability to communicate at all levels in a fast moving environment. Experience in Drilling, Construction, Maintenance and Production.

Work History in brief: Hay Engineering Ltd - 1985-89 Sedco Forex - 1989-94 Retsco Intenational - 1994-99 Finnco Ltd - 1999-2000 Transocean Deepwater drilling - - 2000-2003 BP-CNOOC - - 2003 - present.

Application for Offshore Drilling Rig Mechanic

Experienced Cad Manager/Project Coordinator. Proficient with 3d modelling using Autocad, ADT33, Autoplant, CadDuct and MultiSteel. Also experienced in using Microstation, PDMS, Prime Medusa and ProcAdam. Engineering background - Structural/Civil.

Over twenty-seven years of domestic and international experience with a broad range of pipeline, oil and gas, and associated facilities projects.

Bachelors in Technology - Chemical Engineering – 14 years performing works on: Hysys, Pro-ii, Pipe Phase, Sinet, AutoCAD, AutoLISP, Micro-Station, 3Dstudio Max, Primavera, MS-Project and MS-Office products

chronological resume last updated April 12, 2004

Ops., Eng. and Field Service Manager: experienced in technical, project and operations management; strong and extensive record in managing engineering & operation personnel teams; implementing from start to finish of corporate technology programs provided to diverse clients around the world.

First Prev 51 52 53 54 55 56 57 58 [ 59 ] 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out