CONTACT INFORMATION:
View contact information...
SUMMARY OF QUALIFICATIONS:
L.M.E.(Diploma in Mechanical Engineering)Please enter brief description of your skills and qualifications.
------------
OBJECTIVE:
I wish t work as aRotating Equipment Engineer/Supervisor
------------
WORK EXPERIENCE:
Assignments Held:
11/07/2004 to Till now; Eni – Iran BV:
Working with Eni-Iran (AGIP) through GPS,at Iran in South Pars Phases 4&5 as a Rotating Equipment Supervisor in Large Gas Processing Plant of Capacity 2000MMScFD of Gas and 83,000 Barrels per day condensate.Handling Rotating Machineries Maintenance in Large Oil & Gas plant viz. Centrifugal compressors, Reciprocating compressors, Gas Turbines of GE Make(40 MW & 33MW), Power Generators of GE Make(33 MW), Air fans, Centrifugal & Reciprocating Pumps of single stage and multi stage, Metering pumps, Cryogenic tanks and Pumps(make by Elliot Ebara-japan).
Gained Sufficient Experience in this Project various plants like…
Gas processing, Condensate processing, Mercaptans, dehydration and acid gas removal, Mercury removal, Sulphur recovery, Refrigeration, Liquefaction of process plants and Utility plants like, Air compression, Nitrogen, Steam boilers, Metering of Liquefied gases etc…
01/06/2002 ~ 30/06/2004; SHELL PETROLEUM DEVELOPMENT CORPO RATION:
* From 2002 working with SPDC through Dietsmann (Monoco) as Mechanical Supervisor (Rotating Equipment) / On job trainer with SPDC,(SHELL) Nigeria at SANTABARABAR,CWARTHON CHANNEL 1,2,&3, KRAKAMA AND AWOBA Flow stations in Delta region producing 135,000 BBls/ day oil and 200 MMSCF/ day pressurized Gas. SPDC is a Joint venture of NNPC, SHELL, TOTAL FINA ELF, and AGIP. As a Mechanical Maintenance Supervisor in SHELL Handling operation & maintenance. of Oil & Gas Project (Off shore Platform with 42/42 Days On/Off rotation).
* Carrying day to day Jobs on oil flow Platform, well head checking, maintenance of Diesel Generators (1050KW capacity), Gas Generators (980KW) of Caterpillar make, Oil Transport pumps, Gas flow compressors of Reciprocating & Centrifugal (Nuovo-Pignone make), HP, LP, Test Separators, Surge vessel, Control Valves, Safety Valves,Well head Valves, Air Compressor Maintenance...etc.
23/03/2001 – 27/01/2002; CONOCO – SYRIA (CSDGL PROJECT):
* As a Mechanical Maintenance. Supervisor in CSDGL -CONOCO Syria Dez gas plant in Syria. LPG gas plant..
* Erection & Commissioning of HP Compressor(Multistage) GE Make(NUO-PIGNONE) and YARK, including leveling, alignment checks, grouting, Piping and its Stress checking, hot & cold alignment checks as per vendor specification.
* Erection & commissioning of all types of pumps in the plants including its leveling, alignment checks with & with out piping.
3/11/97 ~ 15/03/2001; Reliance petroleum limited (RPL / RIL):
Asst. Manager (Mech. Maintenance) at RIL(Reliance Industries Limited)- Jamnagar in polypropylene plant having capacity of about 600,000 MTPY. Taken active part in erection & commissioning of HP compressors of Sulzer and. magnetic Bearing compressor of make Demag Delaval strake (Netherlands) leveling, alignment checks, grouting including its piping and accessories as per vendor specifications.
28/10/93 ~ 14/08/97; K.N.P.C. Mina Al-Ahmadi Refinery, Kuwait
As Senior Supervisor at KNPC Mina Al-Ahmadi Refinery Kuwait, Through M/S KREMENCO Worked in various units like Hydrogen production, Kerosene Desulphurization, Diesel Desulphurization, L. P. G. (Gas Plant), Utilities, Atmospheric Residue Desulphurization, Bitumen, Sulfur Recovery, and Crude Distillation Units.
In KNPC Refinery the jobs handled are:
* Day to day maintenance of Pumps, Compressors, Steam Turbines Etc...
* Preventive maintenance of all rotating equipment's such as…Pumps, Compressors, Fin fans, Gearboxes, Agitators, Dozing pumps etc… as per planning CMMS schedule.
* Making inventory of consumables and spare Parts
* Making time sheets for employees, preparing history sheets of rotating equipment's and filing.
From 1972 –1993: The Fertilizer Corporation of India Ltd. Ramagundam-India
As a Maintenance Supervisor in F.C.I. Limited, Fertilizer Corporation of India – a Leading organization. Carried out all types of maintenance jobs as specified above
EDUCATION & CERTIFICATION:
Education ional qualification:
Diploma in Mech. Engineering. (LME)
Computer knowledge: MS word, MS Excel, MS PowSpecial Training Undergone:
* Safety & Accident Prevention & Fire Fighting
* Special Training obtained from Nuovo-Pignone at Florence-ITALY for Gas Turbines and Centrifugal Compressors
* Special Training obtained from KSB Pumps at PUNE (India).
* Special Training obtained to implement SAP Program as an End User In RELIANCE INDUSTRIES LTD.
* CMMS(IFS)for maintenance and EDMS for Documents
* During Installation, Commissioning, start-up, and major overhaul during operation Maintenance stages on
* 1) Gas Turbines to Drive generators/ to Drive HP Compressors(General electric, Alsthom)
* 2) Centrifugal & Reciprocating Compressors (Nuovo-Pignone, Atlascopco, Ebara).
erPoint,
ERI: SAP R/3 and CMMS (IFS) System (End User
ADDITIONAL INFORMATION:
Other Specific Challenges Handled:
Maintenance Support and trouble shooting for all complex rotating equipments of running plants. Support team member for De-bottle necking projects installation, commissioning and trouble shooting of modified/new complex equipments. Preparation of failure analysis reports. familiar with international standards and codes for testing of rotating equipment's. Review and approval of drawings, specification and technical document rotating equipments. Witnessing factory acceptance tests for compressors, gearboxes, pumps with respect to the standards and procedure. Co-ordination with various departments on Plant changes, Supporting plant operations, maintenance and planning departments in meeting the plants availability requirements.
Meeting with Vendors for various engineering activities. Inspection of vendor supplied Equipments.
A loyal, team-spirited. Excellent forecasting and decision-making skills in high-stress Environments.
Skills acquired in trouble shooting on Rotary Equipments:
Centrifugal Pumps and Reciprocating Pumps (single stage and multi stage with diffirent manufacturers)
Centrifugal Compressors and Reciprocating Compressors (single and multi stage with diffirent manufacturers)
Steam and Gas Turbines (GE & NUO-PIGNONE make 40 & 33 MW), Gear Box, Generators, Fin Fans, Valves etc…
Screw Compressors, Blowers, Extruder, etc…
View contact information... |