Resume - I am an enthusiastic and professional Marine Engineer / Plan Maintenance System ...

Misco Jobs

Resume #72190

CONTACT INFORMATION:
View contact information...

Professional Profile:

I am an enthusiastic and professional Marine Engineer / Plan Maintenance System Engineer, working with AMOS and RAST Programs. I am quick to grasp new ideas and concepts, and to develop innovative and creative solutions to problems. I am able to work well on my own initiative and can demonstrate the high levels of motivation required to meet the tightest of deadlines. Even under significant pressure, I possess a strong ability to perform effectively.

Career Summary:

2004 Up to present-

Work as 3rd Engineer and Plan Maintenance System onboard ships, Shipyard and Site office of Teekay Shipping Ltd.

Build and convert database of Plan Maintenance System of Crude Oil Tanker, Product Carrier, Shuttle Tanker and LNG Vessel.

Formal Qualification:

National Diploma in Bachelor of Science in Marine Engineering
Philippine Merchant Marine Academy

Certificate and Trainings (All Valid):

Basic Safety Course
Personal Safety and Social Responsibility
General Tanker Familiarization
Advance Fire Fighting Course
Medical First Aid Course
Proficiency Survival Craft and Rescue Boat
Helicopter Underwater Escape Training
Shore Based Fire Fighting

Work Experience Summary:

*MV INNOVATOR
2 May '02 to 5 May '03 – Work as Engine Cadet and Motorman in Bulk Carrier Vessel.

*MT HELGA SPIRIT
16 Feb '05 to 17 Mar '05 – Work as 3rd Engineer / PMS Engineer in Crude Oil Tanker. In charge in planning scheduled maintenance of all machineries onboard crude oil tanker vessel.

*MT ERIK SPIRIT
7 Apr '05 to 28 Jun '05 – Work as 3rd Engineer / PMS Engineer in Crude Oil Tanker. In charge in planning scheduled maintenance of all machineries onboard crude oil tanker vessel.

*MT HELGA SPIRIT
1 Jul '05 to 10 Sep '05 – Work as 3rd Engineer / PMS Engineer in Crude Oil Tanker. In charge in planning scheduled maintenance of all machineries onboard crude oil tanker vessel.

*MT MATTERHORN SPIRIT
14 Nov '05 to 23 Jan '06 – Work as 3rd Engineer / PMS Engineer in Crude Oil Tanker. In charge in planning scheduled maintenance of all machineries onboard crude oil tanker vessel.

*LNGC Catalunya Spirit
1 Apr '06 to 7 Jun '06 - Work as 3rd Engineer / PMS Engineer in LNG Carrier Vessel. In charge in planning scheduled maintenance of all machineries onboard crude LNG Carrier Vessel.

*MT Basker Spirit
1 Jul '06 to 1 Sep '06 – Work as 3rd Engineer /PMS Engineer in Shuttle Tanker Ship. Work in Teekay Shipping Singapore Office as database technician of MT Basker Spirit plan maintenance system database.

*Database Technician / Plan Maintenance Engineer
3 Sep '06 to 15 Feb '08 - Work as Database Technician of Plan Maintenance System of Teekay Shipping 4 new build vessels in HHI Shipyard in Ulsan, South Korea. I do the planning of maintenance schedules of all machinery onboard including machinery and spare parts entry in the system.

Below are the 4 new build vessels that I work with:
*MT Donegal Spirit (Finish Product Carrier)
*MT Galway Spirit (Finish Product Carrier)
*MT Limerick Spirit (Finish Product Carrier)
*MT Cork Spirit (Finish Product Carrier)
.
*Database Technician / Plan Maintenance System Instructor
21 Aug '07 to 15 Feb '08 - Work in Teekay Vancouver Office as Database Technician and RAST System Instructor for Teekay Shipping Ltd. I work to convert 14 vessels database from AMOS M&P PMS System to RAST PMS System. I work as instructor and conduct trainings for the ship's personnel in using RAST PMS System.
* Database Technician / Plan Maintenance Engineer
29 Feb '08 up to present – Work as Database Technician in Teekay new build LNG Vessel and Crude Oil Tanker Vessel in Samsung Heavy Ind. Shipyard in South Korea.

Below are the 5 new build vessels that I work with
*MT Apex Spirit (Crude Oil Carrier)
*Al Huwaila (LNG Carrier)
*Al Kharsaah (LNG Carrier)
*Al Shamal (LNG Carrier)
*Al Khuwair (LNG Carrier)

Valid Visa And Document:
*US Visa – Expiry Date: Feb 2012
*Korean Visa (D-9) -
*Passport: Mar 2011
*Seaman's Book: Feb 2013
*Bahamas License: Dec 2009
*National Certificate: Dec 2009
*Liberian Seaman's Book: Dec 2009

Personal Details:
Date of Birth: 03 May 1982
Languages: English and Filipino
Nationality: Filipino

Reference Are Available on Request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3701 to 3750 of 9776)

Go to Search Parameters...

Brief Description

Mech. Engineer & MBA with over eight (08) yrs of exp in Project Marketing. Engaged in BD activity for Process Package/ Eqpt required in Offshore/Onshore projects of Oil & Gas Sector with full exposure to Separation Eqpt, Process Heaters, Electrostatic Emulsion Treaters, Glycol Dehydrator, FG Skid.

Creative and highly results-oriented professional with significant sales and marketing experience, including high-level corporate communications, public relations, business development, project management and management of professional staff. Possesses strong ability to balance practical, analytic a

I am a qualified mechanical engineer, graduated in 1993. Since than have been working in various projects of Power Plants. Presently, I am working as deputy manager (second to general manager). We are running furnace oil and gas operated power plants.

Has more than 18 years experience in materials, procurement, contracts and project planning & control, performing activities during the engineering, procurement & construction phases.

Third part analysis for field operation, Field Operation responsible, Risk analysis, Supplier responsible, Contact with the client responsible, Well Design Casing Design.

I have passed I T I and diploma electronics & Comm. Engg.with the more than 10 years experience of relevant field

Piping Layout design.

Initiating contacts and coordination with Suppliers, preparation and issuing of ITB, compiling and issuance of Purchase Orders according to Shell internal procedures, invoices processing, Preparation of Memos, Letters, and Transmittals to the Subcontractor with English translation

I'd like to apply for a landman position with your company. Will send you my cover letter and referral letter upon request.

I have total experience almost 4 years in piping stress analysis. I have work in oil & gas project as well as power plants. I can work on piping stress software like caesar II, autopipe and triflex. I have knowledge of European code 13480 and asme 31.1 & 31.3.

Work on DCS, PLC, Fire and Gas, process control instrumentation installation, commissoning and maintenance, Currently working as Senior Instrument Technician in Ras Laffan Industrial City, Qatar.

This letter is to express my interest in the Proposal / Estimation Engineer position. Based on my skills in boiler field for past four years, I am confident that I would be a great addition to your team.

I have 4 years experience in PLC Automation .(3 years in Schneider and 1 year in GEFanuc PLC). PLC logic development , SCADA development ,Field activties and commissioniing of PLC systems.

4 years experiences in Oil & Gas engineering. Workings in safety engineering design include loss prevention (e.g. fire fighting design, firewater hy-draulic calculation, PFP, etc), risk assessment (e.g. HAZOPS and HAZID, FMEA, SIL, consequence analysis)

Natural Gas Foreman with 13 yrs experience.

As chemist in the quality control Lab, The chemicals of toothpaste and shaving cream [(NaOH, KOH, Free fatty acid) concentration, Ph, viscosity and density] in lab and quality control on all the production stages in factory

I have strong analytical and problem solving capabilities and ability to use initiative. I have a good view about drilling and work over operations very good knowledge about calculations and used to work as a driller sometimes on rig break in drilling rig and work over. This job primarily responsib

I have worked on the oil rigs for approximately 10 years. I have experience in Canada, Africa, Guatemala. I am also a Certified Safety Officer. I hold a valid Second Line Supervisors Well Control Certificate among many other Certificates and I also have a valid Passport. I am ready to work!!!!!!

Detail engineering

Electronics & Mechanical Engineering with QA/QC certification

Diploma of Associate Engineer In Electronics Technology(Supervised two shut-down at PARCO refinery in 2002, 2007 & my scope of work covered, Control valves, Compressor, Steam Turbine & high pressure Pumps instrumentation removal, overhauling, calibration check, reinstallation and start-up sport)

I hold the DP Officer Certificate and the Chief Officer Certificate of Competency Class II/2 with a proven track record in either the offshore experience on DSV, Pipelay, AHTS, Survey, Supply vessels and also seagoing on container, bulk and LPG vessels worldwide.

Having eleven years experience in field of Oil , Gas & Petrochemical industry

Diploma Mechanical engineer + CSWIP 3.1 + NDT ASNT lev II + ACAD + P3

Passed Matriculation from Bombay Board in English,:Passed Diploma from Kohinoor Technical Institute in Industrial-Elect, Two years course.Attend Safety Training in QATAR GAS, SABIC,ADNOC . HSE Induction,H2S Awareness and Escape. Received Safety Award Certificate from ADNOC on its ongoing projects.

Bachelor of Electrical Engineering [BE] : 5 Years Hands On Experience in Power Utility Company in Medium and Low Voltage System Operations and High voltage 132KV/11KV Substation Protection Systems

Process Engineer, having 2 years of experience in Oil and Gas sector, working in FEED department. Having exposure to Process Simulation tool like HYSYS STEADY STATE HYSYS DYNAMIC SIMULATION, ASPEN PLUS, SULSIM and Equipment Design/Rating Software like HTRI, HTFS, KG TOWER, and SULCOL.

Looking for Tender Administration role in Engineering companies, in particular to Petroleum/Oil & Gas industries.

I am presently employed with Black&Veatch, a US based reputed company doing mainly Oil &Gas and EPC projects mainly in power plants.

Process engineer with two years of experience in the feild of basic enginnering, front end engineering design and precommissioning and commissioning of process plants.

Supervision of logging PROC

Provide day to day on-site supervision of drilling operations to ensure operations are performed in accordance with the Drilling Program in a safe cost-effective manner.I m responsible for Health and Safety procedures being continuously enforced

Development, maintenance and utilization of the full field reservoir simulator

I am an enthusiastic and professional Marine Engineer / Plan Maintenance System Engineer, working with AMOS and RAST Programs. I am quick to grasp new ideas and concepts, and to develop innovative and creative solutions to problems.

Total Exp. 2 years. Exploration, Drilling, Workover - offshore and onshore wells. Estimating cost of oprn., coordinating with service providers, supervising drilling operations.

PLC programming, installation and commissioning of motor drives/ process controller and instruments and have expertise in board-level repair of electronics controls and PC board.

Natural Gas Treatment and Natural Gas Separation,Utility,Offsite Operator

PDMS Project Setup, Database creation, Assignment of teams & users for project, Creation & modification of catalogue & specification for project, Data dictionary, Administration & trouble shooting, Customization using Programmable Macro Language (PML) for design & draft module, Equipment modeling,

•Leadership Quality,•Loyalty with the assigned responsibility,•Decision making •Desire to produce better results than previousability,

I have passed bachelor"s degree& have 11 years working experience of utilities operation in oil and gas refinery ,petrochemical and polyester plants.

I posses more than 10 years of experience in Projects Planning, Scheduling, Monitoring and Control in India and abroad on assignments in USA.

Drilling supervision and engineering, well control instructor, rig commessioning

Reservoir Engineer, B. Tech (Petroleum Engineering), 11+ years in reservoir simulation studies, development planning, performance review, well equipped with most of analytical aspects

Mechanical/Piping Engineer with 13 years experience in offshore industry looking for new challenge. Good communication, organisation skills. Team player. Good knowledge of piping and mechanical codes and standards, Caesar II, PV Elite, CodeCalc.

An experienced and highly skilled Project Manager with over 10 years of practical experience working in the Project Management field for organizations in the government and the private sectors.

10 years experience in the oilfield Drilling and well services both on offshore and land rigs. Field Engineer experience performing installation and trouble shooting of drilling equipment.

Geophysicist/Geologist/Seismologist/Volcanologist

A B.E. Chemical Engineer with broad ranging experience in Health, Safety & Environment (HSE) in oil and gas sector. proven results to minimize the risk and injury to personnel, protect company’s assets as reasonably and as practically possible.

•A professional with excellent communication, organizational, and administrative skills. •A team player capable of motivating others offering more than 10 years of progressive experience.

Environmental or HSE Manager with 13 years industry experience, the past 7 of which have been focused on EMS and HSE-MS for the upstream oil & gas industry. Worked in Australia, Middle East, Sth Europe, West Africa & Russia.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 [ 75 ] 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out