Resume - ME (Structural Engineering) From Regional Engineering College (NIT), Trichy, Ind...

Misco Jobs

Resume #72532

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
Seeking a quality environment where my knowledge can be enriched. Looking for the opportunity where I can improve my technical skills, progress professionally and exposure to advanced Civil/Structural Engineering techniques.

SUMMARY & EXPERIENCE:
EVERSENDAI ENGINEERING L.L.C
(Web site: www.eversendai.com)
Dubai & Qatar, U.A.E

Designation: Design Manager
PROJECTS:
1.0 Nakilat Ship Construction Facility ¡V Building Superstructure,
Construction Hall, Qatar
The main scope of work is Member Analysis, Design, connection design, producing the fabrication drawings, Shop drawings and Erection of steel structures, approximately 10,500 tons. This building contains three expansion joint, the span of crane Girder run way beam is 15 meters and capacity of EOT is 120 Tons (two numbers) for the height of 38 meter and width is 65 meter.
Code Used: BS 5950 ¡V Part -1(Structural Use of Steel works in buildings), 2, 4 & 5/ BS-6399, Part -1 & 2 (Dead & Imposed load)/ Wind load for BS CP-3, Part-2/BS2573 Part -1 Rules for the design of cranes, Specifications for Classification, Stress calculation and design criteria for cranes/Uniforms Buildings Code -1997 for Earthquake Design.
Project Consultant: Royal Haskonina, (UK), in Association with COWI
Design/Structural Consultant: Eversendai Engineering LLC.
Client: Qatar Petroleum
2.0 New Doha International Air Port (NDIA) @ Qatar.
The Scope of the work is Analysis and design of Temporary Engineering with Connection design and Main Terminal building, Concourse ¡VA,B & C checking the Shop drawing, Fabrication Drawings (approximately -55,000 Ton) and Erection drawings.
Code used - LRFD, AISC, ASCE, and UBC& ACI 318-05.
All Analysis & design (Including Connection design) submittals Approved by -Overseas BECHTEL, INC. & Middle brook and Louie
2. Burj Dubai Development ¡V Dubai Mall
The Scope of the Work is Analysis and design of Concourse Skylight Roof Truss with Connection Design. The length of the each truss is 30.8m with End Support, The height of the Truss is approximately 2.40m. All the section are Closed Section Like Rectangular, Square and Circular Hallow section. The Connection Design Carried out me by using BS Standards (BS-5950-1 2000, BS-6399 Part-2 for wind load), AISC-LRFD (Part -10, 11&12) for Connection Design and CORUS, CIDECT Design Guide for Closed section connection Design. The Over all size of this Structure is 131m x 34.8m.
This Analysis, Design and Connection design Checked and Approved by: -MEINHARDT (Singapore) Pte Ltd.
3. Mall of Emirates at Dubai (Snow Centre): -
The Scope of the work is Analysis and design of Strand Jacking Tower and Connection design. The permanent Structure was lifted 32.5m from the ground level. The permanent structure lifted by VSL- Switzerland using Strand jack. This Structure is supported with eight towers. The load coming from the permanent structure is approximately 4000 tones to the towers. The total height of the tower is 80m and size of the tower is 3.5mX3.5m. The design is carried out as per BS standards (BS-5950).
This analysis, Design and connection design Checked and Approved by: - Hyder Consulting Middle East Ltd.
4. Bright Start Tower Connecting Bridge at Dubai:-
The Scope of this work only analysis and Design of the Bridge Structural Steel Works connecting the Tower building (G+59) and car park (G+12) building at +25.50m from the Ground level. The length of the bridge is approximately 20.5 m and 1.80 m width and 3.50m height, the purpose of the connecting bridge only for Pedestrian crossing. The design is carried out as per BS standards (BS-5950-1, 2000).
This analysis, Design and connection design Checked and Approved by: - W.S ATKINS & Partners Overseas.
5. Marina Heights Tower Dubai:-
The Scope of the Work only the Connection Design for the Marina Heights Tower, the connections is very complicated. all the Main member supported maximum of Five members most of the member is sloped. This Structure is coming on the 54th floor. The design is carried out as per BS standards (BS-5950-1, 2000).
This Connection design Checked and Approved by: - ROBERT MATTHEW, JOHNSON-MARSHALL (RMJM Structural Consultant)
6. SKY- train supporting structure -Dubai Airport
The Scope of the Work is Analysis & Design of Sky -Train Supporting Structures at Dubai International Airport Expansion Terminal -III & Concourse II & III. The Sky Train has maximum height of 36.75m and overall width of 27.15m cross width is 4.25m. The lateral ties are provided between the columns in each row at every 2.4m vertical spacing. The design is carried out as per AISC-ASD, BS-6399 part-1 for dead & imposed load and LRFD.
This analysis, Design and connection design Checked and Approved by: - Dar Structural Consultant.
LARSEN & TOUBRO LIMITED
(Web site: www.lntecc.com)
Chennai
India

Designation: Senior Design Engineer, Larsen & Toubro limited at Chennai, India.
Completed projects:
1.0 SURMA CEMENT PLANT FOR LONG BELT CONVEYOR for India portion and Bangladesh portion. Scope of work is Analysis & Design only for the Supporting structure the span between the Supports is 45.75m, 60.1m, 85.25m &100.5m. The design considered mainly Wind load, Belt load and Seismic load.
1.1 The analysis used for STAAD/Pro the Structural analysis & design software.
1.2 The design Used for ACI-318-83 Design Hand Book & Building code
Requirements for Structural concrete (ACI: 318-02).
Code used: Indian standards & American Standards ACI: 318-02
On going Project; -
1.0 Head End Facility for Indira Gandhi Centre for Atomic Research at
Kalpakkam, Governments of India.
1.1 This Structure the analysis Carrey out by GT STRUDL structural analysis
Software for Finite elements application.
1.2 This structure analysis used foe response spectrum method. (Dynamic
Analysis).
1.3 The following load to be considered for the analysis Crane load, Equipments
Load, Wind load, spectrum loads. (The capacity of the crane is 50 Ton &
30 Ton) Design used for ACI- standards and IS - standards.
1.4 The foundation type is Raft & Isolated type.
VSL INDIA PVT LTD
Chennai-8
(Year Feb-2003 to Feb-04)
Designation: Design Engineer in VSL India Ltd.
Nature of Job: Post tensioning designs for various structural element systems with Using the VSLAB "VSLAB (Specialized Software for Post-Tensioning works)".
Design of Post-Tension in Buildings Structure & Bridges with using, BS 8110: Part 1:1997- Part- 1 and India Codes.

* Following Structural system are used for Post-Tensioning:

„« Flat Slabs System
„« Flat Plate system
„« Beams and slab System

INDIAN INSTITUTE OF TECHNOLOGY, MADRAS
Chennai-36, India
(Year January- 2002 to February -2003)
Designation: Project Officer, Department of Ocean Engineering
The Indian Institute of technology Madras, one of the prestigious institute in the world. The institute is also involved in various consultancy work in India, Civil/structural Engineering.
1. The main scope of work is "Analysis and Design of 9th Cargo Berth in KANDLA Port." (Kandla port on the west coast is one of the 12 major ports in India). The work involves finalising conceptual layout, load calculation, analysis and design of the berth work is carried out using the relevant Indian standard. The analysis is carried out with the standard Structural Engineering package STAAD/Pro. The main feature of the project in the consideration of seismic force, as this port is in a region with high seismic activity.
2. The main scope work for "modernization and rehabilitation of North Quay Chennai Port." the Chennai Port is a major port on the East coast of India. The North Quay is a passage ship-berthing Jetty with allied facilities. Due to the decrease in serviceability of the structure, there is a proposal to carryout an a modernization programme and also the rehabilitation of the existing structure, which is a piled jetty, My work involved finalising the conceptual layout and initial preliminary analysis and design of the proposed new Jetty. The detailed work will be commencing soon.
3. The main scope of work "Berthing Head at Chain Nallah of Rutland for Andaman Harbor Works" at Andaman and Nicobar Islands, India.. In this project I carried out analysis and preparation of layout and reinforcement drawing. For this analysis the Structural Engineering Package STAAD/Pro was used.
4. The main scope of work "Analysis and Design of R.C.C Bridge" for Chilika Development Authority (CDA), which is a authority of the Govt of Orissa state, involved in conservation and development of Chilika Lake, a UN recognized wetland. I have carried out analysis and design of the R.C.C Bridge the moving load concept was used to analyse the bridge with STAAD/Pro. The loading was taken according to the relevant Indian standards.
5. The main scope of work is Analysis and design work for " Sheet pile wall for the Construction of Pipe Line at Dahej". Client ABAN construction Pvt Ltd, Chennai-31.In this project I was used for this analysis the Structural Engineering Package STAAD/Pro.
6. The main scope of work, Analysis and design work for "Sheet pile wall for the Construction of underground portion of Connought place Railway station at New Delhi". Client AFCONS INFRASTRUCTURE Ltd, Mumbai-53. This project I was used for this analysis the Structural Engineering Package STAAD/Pro.
SOUTHERN STRUCTURAL CONSULTANTS
(Computer Aided Design & Structural Analysis)
Chennai-101
(Year 1998 to 2000).
1. The main scope of work, previously in this company as initially as Junior Design Engineer and then as Design Engineer. As Junior Design Engineer my work mainly involved preparation of Detailed Estimate for various structural works.
2. The main scope of work is "Analysis and Design of Industrial steel Building Structure at Tiruchirapalli." The work involved finalising the conceptual layout, load calculation, analysis and design of the Structure. The analysis is carried out with the STAAD/Pro package. The design was carried out using the relevant Indian standards. The main feature of the project in the consideration of seismic force and wind force.
3. The main scope of work "Analysis and Design of G+4 storied Building at Chennai". The work is an R.C.C Structure. The work involved finalising the plan, load calculations, analysis, and design. The analysis was carried out with the standard Structural Engineering package STAAD-III and the detailed Reinforcements drawing prepared.
4. The main scope of work "Analysis and Design of Steel Industrial Building". The structure consists of steel trusses covered with A.C Sheet. In the analysis the wind force and seismic force were considered per relevant Indian standards. And analysis was carried out using STAAD-III package. The design was carried out and the detailed drawings prepared accordingly.
5. The main scope of work "Analysis and Design Shell Structure (Steel)." The Structure consists of steel elements covered with fiber reinforced plastic (FRP) roof. The loading for the structures consisted mainly of Wind force. This analysis was carried using for Structural Engineering Package STAAD/Pro.
6. Apart from above different field, involved in analysis and design of various structures like Power Transmission Towers, Overhead and Underground Water Tanks etc.

EDUCATIONAL:
ME (Structural Engineering) From Regional Engineering College (NIT), Trichy
Year of Completion: 2002
BE (Civil) ¡VMadurai Kamaraj University, Tamil Nadu, India.
Year of Completion: 1998

PROFESSIONAL PROFILE:
„« STAAD/Pro
„« ANSYS
„« Qualified Graduate Test in Engg (GATE-2000)
„« Active member in AISC

PERSONAL DETAILS:
Date of Birth: 13-04-1976
Sex: Male
Marital Status: Married
Nationality: Indian

REFERENCE:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2001 to 2050 of 9901)

Go to Search Parameters...

Brief Description

Driver

Dutch Process operator with 20 years Experience ,Siemens S.P.7 Software WinCC and DCS

As a technological process engineer at The Main Platform I am alternatively dealing with two kinds of jobs: in the field and in the control room.

Front end setting in ,pipebending,fabrications,lower & lay,tie-ins.

I am an Unlimited Oceangoing Master with more than 15 years experience as Captain, ten of which are on Offshore Support Vessels.

With seventien years of diverse experience,I have a broad base of skills to offer.I have expertise in production,commissioning,construction,fabrication,process variables, processing,projects,marine loading off-loading and Modern Safety management systems and with a special interest in Pro-active Sa

I am a qualified and Certified RED SEAL ELECTRICIAN / E&I Supervisor with a broad background within the Petro-Chem industry both on and offshore. Experienced in leading teams, self-motivated with excellent communication skills, can drive change and motivate individuals to enhance company performa

17 years experience as a Piping/Mechanical Draftsman/Designer in the Oil & Gas industries (Offshore and Onshore facilities). Proficient use of design software include AutoCAD 2008i, PDMS to model and generate 2D drafting and also MDS design software to design and model pipe support.

Senior Mechanical Engr. with a vast amount of process in engineering, operation, optimization of oil and gas production facilities (Well completions, artificial lift and gathering systems) Harnesses best-practice project management methodologies

Certified Professional in Human Resources (PHR) - US SHRM 2002 exams, Certified Instructor in Interaction Management - Development Dimesnions, Int'l; HR Competencies - Staffing, Learning & People Development, Organization Development, Perf. Mgt., Compensation & Benefits Adm., Policy Formulattion

B.COM GRADUATE, WITH DIPLOMA IN BUSINESS MANAGEMENT AN D DIPLOMA IN IMPORT AND EXPORT MANAGEMENT, 25 YEARS EXP IN FIELD OF ADMINISTRATION AND PURCHASE. PRESENTLY IN OMAN FOR THE PAST 5 YEARS. PRESENTLY WORKING WITH HMR ENVIRONMENTAL ENGINEERING CONSULTANTS AS PROJECT ADMINISTRATOR.

Lead or Senior Electrical Designer

Maintenance Manager mining and oil&gas

Seeking position as…Welding Engineer/Welding Inspector Leveraging an experienced track record for improving company performance and profitability.

Senior Geologist

My skills include, but are not limited to diesel engine rebuilding,hydraulic equipment repair and modification, troubleshooting and repair. Drilling equipment, cranes, forklifts and are some I have experience with. Mechanical equipment includes Cat engines, Drawworks, Mud Pumps, TDS9S, TDS11S.

DCS, PLC, SCADA and training.

13 years post qualification experience in FEED, detailed Engineering and Engineering Management for Chemicals/ Fertilizer, Petrochemicals(Ethylene, Poly Ethylene,Poly Propylene etc), Refinery, Oil and Gas industry (Onshore & Offshore, Upstream & Downstream) and detailed engineering in Pressure vesse

I am a Mechanical Engineer with 16 Years of experience as "Piping Engineer" in engineering of Offshore plants i.e Fixed platforms, FPSO, FPU and Onshore plants ex. Refineries, Petrochemicals, Polyester Plant etc. I am having vast experience of working with Leading International Clients.

I am a Petro Chemical Safety Specialist with over 25 years of experience in Operations, Projects and Mechanical Turnarounds. I am familiar with various cultures and styles of safety management. I have been the lead safety specialist in many projects involving 700+ contractors in high-volatilty areas

Oil gas tankage [farm tank-speherical - double wall] fabrication/construction management. QAQC mangement - construction safety management

Associate myself with an organization, which has potential for both organizational and individual development and scope for learning and to enhance my skills team output and competent professional.

A Marine Maintenance engineer with International exposure and managerial experience. Last post as Technical superintendent at Tokyo, shipping related.

QA/QC Professional Manager Construction/Operations

Working in RFCC unit in refinery including gas plant.

Working more than 15 yrs in Oil Terminal as in Supervisory Level & above. Seeking Supervisor Position in Qatar.

Senior production operator (offshore processing platform) and senior production operator onshore (GOSP) gas oil separation plant

Experience in O&M of gas turbine &steam turbine

Fifteen years of experience in Construction in the Middle & Far East on large-scale multi-disciplinary infrastructure projects. Worked with BECHTEL in liberated Kuwait in the early 90s in the rehabilitation & expansion of Gathering Centers, Drilling Locations, Tank-farms and Flow-lines.

Fifteen years experience in corporate finance and advisory to local and international oil & gas companies, half of which has been in the CIS Extensive due diligence experience Fluent Russian, conversational Spanish

Industrial Gases Manager, Multisite (ASU, CO2). Also nuclear reactor and steam turbine experience with U.S. Navy. New construction/startup experience. Seek challenging position to continue career growth with significant visibility and importance to profitability of company, overseas employment.

15 years experience of planning, design and implementation of Networks, Telecommunications, Systems implementation and integration, with IT teams around world using my expertise and Multi-language skills: English, Russian, Portuguese, Spanish.

Engineering services to the community and the industries and future progression as a chemical engineer in all related fields such as designing oil and gas industries and mining

I worked for ten (10) years in the oil / Gas and Water injection and utilities with Sonatrach Company and then with an association between sonatrach /Anadarko in Algeria as shift supervisor, shutdown coordinator and then chef de service.

As young & energetic, Enthuastic, Candidate Having Strong Communication Skills to be associated with professionally managed organization, contribute to highest potential to achieve growth of the company and carve path to compete for challenges in refinery, Oil & Gas field and petrochemical/

ESD logic design and analysis, Process Control design, analysis, and tuning, Honeywell system configurations and implementations, Triconex system configurations and implementations , Design Scope Writing, Conducting review meetings, acceptance tests, and commissioning

ME (Structural Engineering) From Regional Engineering College (NIT), Trichy, India,STAAD/Pro, Active member in AISC

Civil/Structure engineer with local/international experience, more than 13 years experience in detail engineering design and supervision of infrastructure projects (bridge, overpass, etc), industrial, residential and commercial projects.

Group working, quick response Self Motivate,Unit operations & process employed in the section

Management of Operations and Maintenance contracts for Power Plants and Utilities, Well Versed in O&M of FO based Power Plants

Scheduler/ Project Controls

Mechanical Engineer with 14 years experience in Oil and Gas Project Management

Over twenty years experience spent in the oil and petrochemical industry. Experienced in all aspects of electrical commissioning operations and maintenance. With design reviews and Vendor site visits through to fats. with the ability to liase with other disciplines on gas turbine and diesel generato

* 14 years managerial and supervisory experience in the field of Health, Safety and Environment (HSE) predominantly in oil and gas construction and refinery operations. Worked with Caltex (ChevronTexaco Company), TOTAL and was involved in conducting joint training program with Shell.

MAINTENNACE PLANNING / MAINTENANCE /PROJECT/CONSTRUCTION

Piping Designing / Mechanical Draughtsman including development of Layouts, Details, Isometrics, P&IDs etc. as per piping specifications for Onshore, Offshore, Refineries, Process Industries, Chemical, Power and Desalination Plant.

BE. Professional with 15 + Years of Sound Exposure in Project management, Engineering services, utility Operations, Erection, commissioning & Management

Mechanical and Marine Engineering. - Experience in Diesel Engines, Generators, Gas Turbines and Steam Turbines. - Experiences in Computerised Maintenance Management System (CMMS) and PMS - Electronic Maintenance Management System.

I am urgently looking for a job on an Oil or Gas rig. I have a high school and Waste Management diploma. I also have 23 years of experience in managemet. I am willing to learn new skills

Production and exploration test ranging from high volume critical sour wells incorporate multiple separators, line heaters, circulating and transfer pumps, to sweet shallow gas testing. Experienced in well testing with high content of H2S, CO2. Experienced in HP/LP separators, pumps and oil producti

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 [ 41 ] 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out