Resume - Attending all the electrical breakdowns and maintaining the equipments

Misco Jobs

Resume #72623

CONTACT INFORMATION:
View contact information...

CARRIER OBJECTIVE

Seeking for a Suitable Position in the field "Facilities & Equipment Maintenance Engineering especially in Electrical & Electronics etc to meet the Goals & Objectives by capitalizing vast and extensive experience of 8 Years

EDUCATIONAL QUALIFICATION

Academic Qualification: Secondary School Leaving Certificate

Technical Qualification: Diploma in Electrical& Electronics Engineering
( 3 Years Course Complete

: Higher Diploma in software Engineering
( 3 Years Course Completed

ADDITIONAL QUALIFICATION

1. Siemens SIMOREG and SIMOVERT Master drives Course From
MY PORT ( SDN )BHD Malaysia.

2. Siemens S7 PLC Basic Course in Dubai Ports World

3. Siemens AC Master Drive Course in Dubai Ports World

4. Safety Training Course from Dubai Ports World

5. Marine Signaling Course from Keppel Shipyard Singapore

WORK EXPERIENCE

DUBAI PORT WORLD,: Presently working as Electrical Technician DUBAI, UAE class-1 in the Crane Engineering Department of DP World from 2005 onwards
Experienced in the maintenance Engineering of Equipments and Facilities and Utilities of Ports, Customs Free Zone Corporation which comprises of a. Crane Engineering: Troubleshooting & Maintenance of 50 Quay Cranes of ZPMC Tandem and normal, Mitsubishi, Mitsui, Nelcon, Reggiane, Deer park make cranes and 150 RTG of ZPMC, P-NOELL, Mitsui & Liebherr.

Maintenance of DC motors up to 680 kw an AC motors up to 960 kw. Also DC Generators and AC Generators. Troubleshooting and rectifying the faults in S7- 300,400 PLC using STEP 7 Software, S5 -155 using STEP 5 software, GE PLC using LM 90/ 30 and LM 6 software also
Micrex – F PLC using micrex software

Troubleshooting and Attending crane breakdowns using
Siemens HMI Software Sicma and WinC

Maintenance Spreader of Bromma and Stinis, Twin and Single Spreader of Lifting capacity of 70 tons.

Good Knowledge in Siemens communication system using optic fiber in profibus, ASi communication system.

KEPPEL CORPORATION Worked as a Electrical Technician in SIGAPORE Shipbuilding & Repair Division from 2001 to 2003 in various fields of Electrical Engineering.

SAQR PORT AUTHORITY Worked as a Electrical Technician in Various
RAS –AL-KHAIMAH Field of Electrical Engineering from 2003
to2005

FUTURE POINT INFOSYS Worked as Electrical Service Engg in the
PRIVATE LTD
CHENNAI field of Computer Hardware & Software. To Setting up all the software & hardware also networking. From 1998 to 2000

PERSONAL INFORMATION
Date of Birth 19-03-1978

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5151 to 5200 of 9776)

Go to Search Parameters...

Brief Description

Drilling Fluids & Waste Management

Alalytics and Chromatography Technical support/sales Engineer

A Wide experience in drafting in major of civil works, structural, mechanical, Piping & Instrumentation and architectural drawings, 8 years of overseas experience,Overall 15 Years of working experience in civil, structural, mechanical, piping, and architectural firms

i can analys the hazard working conditon by using Job Safety Analysis, Risk Assessment and Hazard identification, implementing the safety policy in a good bahavioral way that people can follow the safety rules, im a good trainer in safety firefigthing, first aid, handling ang lifting procedure

I am a degree qualified Instrumentation and Control engineer / technician. I am looking for contract work in the oil and gas industry and I have offshore experience. I have full medical and am OPITO BOSIET certified. I am willing to relocate worldwide and will consider any shift rotation.

To obtain an exciting and challenging career as a Geological Engineering Technologist in the Oil and Gas Industry so that my past experiences and training can grow.

International Field Experience (USA, Aberdeen UK, Dubai, Brunei) with Baker Atlas as a Wireline Logging Engineer, Masters Degree in Petroleum Engineering, B.Sc Undergraduate degree. Currently in Perth, Australia and willing to relocate OR work on rotational basis

5 years of full-time experience in Refinery, Chemicals. An Engineer with MBA.

Diploma In Mechanical Engg. with 6 Yrs exp in Piping Designer

Mechanical and Electrical Mechanic

I have completed B.E in Electronics & Communication in 2008passout

As a recent graduate from an Electronic Engineering and Technologist program, I would like to obtain an entry-level position to apply my skills and knowledge in an exciting and evolving environment, while continuing to learn and upgrade my new skills.

Free! Millwright - supervise, build, repair, install and commission industrial equipment

To apply for a leading company in a challenging and motivating position to express my abilities and excel my capabilities.

PLC Programming - LADDER, STL and FBD Editors. of Siemens PLC’s S7-200 and S7-300.

3 years experience oil field as secretarial work.

Welding all rod types: M.I.G., T.I.G, all plastics, oxyacertylene. Equipment repair and maintenance of all machinery for use in metal working shears, brakes, manual cutting, machine cutting. All machine shop equipment, lathers, radial arm, drill presses, and iron works.

Electrical Engineer ( project & design) with more than13 years of experience with MNC in India, Japan , Middle East for Oil and Gas, Petrochemical, Chemical, Power.

Welding Engineer, Welding Inspector CSWIP, Mechanical Engineer

corrosion failure analysis and corrosion protection

i am working as utility technician in petrolium refainary and i know very well electrical fault&problem i am know ms word/exell and data update

To pursue a challenging position which enables me to utilize my communication and technical skills in providing professional knowledge and support to the Oil and Gas and Energy industry

Mechanical Senior Engineer (Rotating Equipment)

I am currently working for Aker Kvaerner as a Production Technician on the Tiffany platform in the North Sea for the client CNRI UK, in the Tiffany, Toni and Thelma fields. Previous to this I was a CCR/production technician for Maersk Contractors on the FPSO Curlew a 50,000bbl/day vessel in the Shel

Manager of gas contracts totalling 10M therms/day and deliveries to 1875MW Teessie Power Station

Commissioning Instrumentation Engineer with 15 years experience in industry, the emphasis being in Oil and Gas, Petrochemical, Chemical, Power Generation and Nuclear fields based Onshore, Offshore, UK, Overseas and Desert locations.

10+years Instrumentation/Electrical/Control system experience, Canadian Journeyman Instrument Mechanic Certificate, Electrician ticket: Certified Engineering Technologist

Petroleum Engineer Oilfield experience 2 years Electricity Diploma.

Material standardization, Formatted/structured coding & cataloguing, SPIR review, Inventory value optimization, maintenance engg data management(Equipment master, spec),maintenance Bill of material, MRP.SAP, Oracle financials,MESC,CMT,E-SPIR,EMA-3000,PACER-D,Teroman.12 years exp in Oil/Gas Industry.

Landman. Experience in mostly the Rocky Mountain States. Lease Acquisition, Title Research, and Right-of-way.

Seakes International employment in the oil/gas industry, in areas of completions(perforating ), Production engineering. Has 9 yrs working experience as a perforating Engineer with Halliburton energy services in Nigeria.

Honours / Master of Science Graduate in Chemistry with extensive laboratory and moderate industrial experience. Interested in chemical research and development as well as industrial experience.

Continuously enhancing my expertise in manufacturing and my education on engineering management area by consistently contributing to the company.

JOb requires for B.E. ( Fire ) and DIS safety Engineers. Experience : 12 years in Petrochemicals Industries.

I have over 15 years in the production field and consider myself a specialist. I am confident that I can prove to be an asset to your company. I am an “out of the box” thinker, capable of solving problems on all levels.

Directional Drilling Engineer with 8 years of experience working with an important International Oil Service Company, also experience in MWD / LWD, directional well planning and directional drilling services coordination. High motivated, QHSE oriented

Degree in Chemical Engineering from a prestigious university. About 9 years of Experience in teaching and training related to oil sector. Train – the - Trainer certificate from the employer. Knowledge of and experience in the use of Computer Applications. Excellent communication skills in English.

I am a mechanical engineer graduated from Hungary –Budapest in 1991, specialized in gas turbines field and I have been working for the past 9 years in gas turbines maintenance.

Ingeniero Químico bilingüe (Inglés-Español) con 3 años de experiencia en optimización y diseño de levantamiento artificial de pozos. Experiencia en programas de control de corrosión por CO2 y análisis estadístico de fallas. Excelentes habilidades en el manejo de programas de computación.

•More than 4 years of experience within the Oil and Gas Industry •2 years of experience in research, data interpretation, and analysis of results •Computer skills include Ms Office 2000, Hysys, Aspen Plus 10.2, Pro II 5.10, Full OP 8.0, Aldus Photo style, Adobe, Corel Draw

Petroleum engineer with 6 years experience in reservoir simulation, reserve estimation, field studies and economics. Broad experience using various computer programs including MS Office and STARS (reservoir simulation program). Familiar with OFM, ECLIPSE and other reservoir simulation packages

Industrial equipment installation, repair and operator training. Electrical, electronic, mechanical, hydraulic, pneumatic systems serviced. Rigging.

I am working for 6 years as reservoir geologist(1997-present) I worked 3 years as mining coal geologist (1995-1997) and 4 years as geologist for drilling prospection and exploration of mineral resources (1986-1990).

Completion Supervisor, Cementing, Acidizing, DST, Workover

Attending all the electrical breakdowns and maintaining the equipments

telecommunication engineering background (5 years), completion technician for 1 year, good experience with computer

I am having 1+ year experience in Gas Turbine.

Chief Officer with container fleet experience looking for job on Supply Vessels

Graduate (B.sc) Math. Diploma in industrial Management and also (OSHO) Occupational Safety & Health Organization

7 years of experience in the field of fabrication and welding inspection

First Prev 101 102 103 [ 104 ] 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out