Resume - I AM LOOKING TO UTILIZE MY EXPEREIENCE DEVLOPED BY HARD WORK ,CURRENTLY I AM WOR...

Misco Jobs

Resume #72929

CONTACT INFORMATION:
View contact information...

Date of birth 07 April 1977
Age 31 years
Nationality Pakistani
Marital Status Married

AIM To build a career in the growth oriented company in the challenging & learning environment.
ACADMIC QUALIFICATION:
F,sc.(Pre-Eng) from Sukkur Board.

TECHNICAL QUALIFICATION:
02 years apprenticeship carried out from ENGRO CHEMICALS FERTILIZER COMPANY, in 1997 to1998 as PLANT OPERATOR..

TOTAL EXPERIENCE:
Since 1997 to till onward.(11 years)

Present Employee:
National Petrochemical Company Yanbu Al Sinayah Kingdom of Saudi Arabia
From 14th April 2008
Currently engaged in commissioning and start up phase of oleflex unit.
Some brief description of plant is as under,

PDH plant is a Propane dehydrogenation unit and essentially consist of following main units..

OLEFLEX¡K This is UOP moving bed catalyst process designed to selectively de-hydrogenate Paraffins feed to corresponding mono-olefins.(Propane to Propylene) Design conversion is 34%.

CCR (Continuous Catalyst Regeneration System) is UOP process for the continuous regeneration of the spent catalyst by burning coke in regeneration tower.

Cryogenic separation unit, that mainly separates hydrogen from propane/propylene stream at extremely low temperature, -165C.

Feed Preparation and Fractionation unit mainly consist of distillation columns.

Two Auxiliary boilers high pressure steam boilers with 146 ton/hr steam production at 44 bar. Boilers are made by Babcock & Wilcox.

Position Held:
Process field Operator

Experience Detail:
1-Engro Chemicals Pakistan from 1997 to 1998 as Plant Operator.
2-Engro Paktank Terminal ltd.From March 1999 to Oct 1999 as Terminal Operator /Boardman.
3-FFC JAORDAN ltd.From Oct 1999 to March 2003 as Plant Operator /Boardman.
4-AL GHURAIR group of industries from March 2003 as Plant Operator /Boardman.
5-PAKARAB FERTILIZER COMPANY MULTAN PAKISTAN from 24th July 2007 to 07th May 2008 as Process Field Operator.

PAKARAB FERTILIZER COMPANY MULTAN PAKISTAN.
(from July 24, 2007 to May 7, 2008)
1-Utilities Unit Operation Team Member.

ALGHURAIR GROUP OF INDUSTRIES, DUBAI. (From March 2003 to June 2007)
I am working as utility boardman in Oil Extraction Plant, worked as following units.
1-Utilities Unit
2-Steam Generation
3-WaterTreatment (Sodium zeolite process) & Reverse Osmosis Unit

FAUJI JORDAN FERTILIZER CO. LIMITED,KARACHI.(From Oct 1999 to March 2003)

„« Gas Turbine (GE FRAME - V),GE,USA.(combine cycle)
INCLUDED BOI, TMR etc, 27.5 MW, SINGLE SHAFT DUAL FUEL SYSTEM
„« Instrument Air Compressor,Atlas Copco, Belgium,dryer etc.
„« Potable water unit,culligan,USA,filteration,chlorination etc.
„« HP Steam Generator with Deaeration & BFW system.
40 kg pressure, 105 ton /hr + heat recovery steam genrator
„« Waste water Treatment Unit.
„« Natural Gas let down unit.
„« Water treatment & Cooling Tower.
„« DCS BOARDMAN (BAILY INFI-90)

ENGRO PAKTANK TERMINAL. (March 1999 to Oct 1999)
I have worked at following sections, detail is given.
„« Loading/Unloading&Pumpingofterminalchemicalsi.e;LPG, ACN,VCM,PARAXYLENE,ACEITIC ACID,NITROGEN, HEAVY FURNACE OIL, DIESEL OIL etc, also JETTY OPERATION & CONTROL ROOM OPERATION

ENGRO CHEMICALS FERTILIZER COMPANY (ISO-9002). (1997 TO 1998)
I have worked at following sections detail as given.
„« Natural Gas Purification.
„« Water Treatment, ion-exchange process etc.
„« Cooling Tower, induced draft, cross flow etc.
„« Chromate Removal Unit.

START UP EXPERIENCE:

I have participated successfully in following activities at FFC JORDAN (Pakistan) & AL GHURAIR group of industries(DUBAI, UAE).
„« Commission and pre commissioning.
„« Punch listing.
„« Start up and Shut down.
„« Emergencies Handling.
„« Steam blowing.
„« Documentation, e.g. Procedures, Check lists and Log sheets preparation etc.

Have a good knowledge about:
„« STEAM TURBINES Operation
„« P & ID,s reading
„« Hand some knowledge of Water Treatment ( Alum zeolite)
„« HSE,(Health,Safety and Environment)
„« Defensive Driving.
„« Industrial Hygiene.
„« Work Permit Procedure.
„« Chemical Handling & their Hazards.
„« I have also UNITED ARAB EMIRATES DRIVING LIECENCE.

REFERRENCES:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2251 to 2300 of 10018)

Go to Search Parameters...

Brief Description

Over 25 years of experience in the oil and gas industry in: Quality Control and Inspection of Materials, Weld Inspection, Blasting and Coating .Management of personnel and administrative staff. Certification and condition assessment activities of both new and in-service equipment.

HSE specialist with chemical/process engineering background seeking environmental or HSE role within the oil/ gas and construction industries.

The person who’s looking for an excellence in profession, growth in career with in Material Management ,Project Management and Supply Chain Fiels an organization offering a responsible position whereby my academia and work experience can best be resulted.

Please find below my details of experience for Estimation Engineer Position. I am a diploma mechanical engineer and keen in excelling in my career with hard work and accepting higher responsibilities.

Senior Pipelines Engineer with 16 years experience with International Consultancies.

Analyze, design, develop, implement, and evaluate performance improvement programs using the ADDIE process. Experienced in designing and developing online (Web-based e-Learning) and blended learning as well as video training. Have used/been trained in Microsoft Word, PowerPoint, Excel, and Project,

vibration foreman

Process engineering, erection, coordination, Commissioning, operation and troubleshooting in onshore oil field(FPF)

I have been working in the oil and gas industry for over 12 years. I have a 2nd class power engineering ticket. I have been a control room operator for more that 6 years as well as a lead hand during our plants scheduled shutdowns. This involved planning and scheduling work for the shutdown.

Experience in reservoir engineering and other petroleum related activities. Experience in reservoir performance / simulation, secondary recovery methods, and field developments, Production Forecast and in place volume estimation.

Electrical and Instrumentation Engineer having 9 years of experience in construction, Maintenance, Projects, oil, Industries.

Piping Supervisor, QA/QC, Designer, Material control, Welding Inspector,

18 year experience in drilling and workover operation. Land / Desert areas seeks for night supervisor position

I AM LOOKING TO UTILIZE MY EXPEREIENCE DEVLOPED BY HARD WORK ,CURRENTLY I AM WORKING WITH NATIONAL PETROCHEMICAL COMPANY YANBU SAUDI ARABIA

Remote Site Expert : Global Experience.

BSc. Occupational Health Safety from University of Greenwich U.K.

Nebosh Qualified HSE Professional

Having five years of FPSO Operations (as Operations Manager) experience in Nigeria. Always took new challenges at it’s own priority and keep good relations with the Client and crew. I believe good team work will give good results to optimize all the constraints.

16 year experience in gases industry in process operation , diploma in assosiate engineer in chemical technology

Analyzer commissioning and maintenance in oil and gas industries

I have experience on Project & system engineering with testing and commissioning. I have visited various places in India & aboard for commissioning of the systems. I have undergone 3 Months on Job training at Invensys India Pvt Ltd., Chennai for Foxboro DCS. I was affiliated with Yokogawa India

OIL AND GAS, PETROLEUM RELATED EPC PROJECTS - ESTIMATION AND PLANNING USING P3 AND MS-PROJECT SOFTWARES

A 10 years experience Control & Automation engineer serving the oil and gas industries with skillful experience in metering, instrumentations and control & automation system. Solid experiences and confidence in Site Erection and Commissioning, Design and Project Execution.

MSc Marine Engineer, FPSO Contracts Manager

Worked during plant major Shutdown/ Turnaround held in November 2007 and carried out maintenance and calibration of various types of field instruments

Engineering Manager - Petrochemical

Field operator to Foreman of Reformer, Benfield System, Add Boiler End compressor On Hyrogen Plant

15 yrs exps. mechanical maint.

Horizontal directional drilling

DCS, PLC , Instrumentation and control

Determining the direction of the organization by establishing objectives and by designing and implementing the strategies necessary to achieve those objectives or identifying and analyzing the things that may help or hiders accomplishment of objectives.

Engineering, Design, Installation, Commissioning, Programming, Management, Consultancy & Upgrades etc., for all types of Instrumentation & Communication Projects for Oil & gas Industry, Paints, Refinery, Petrochemical and Glass. Preparation of Design Basis Scoping, Functional Specifications Document

B.Sc. public Admin.; Professional Certificate in Corporate managerial Admin. Experience. Over 19 yrs with an oil giant multinational out of which 11 yrs have been at the supervisor positions

Procurement Engineer with 14year Exp. in Oil/Gas/Engineering Industry, Qualification Diploma in Fabriction Engineering

Master Foreign Going Class 1(UK) Certificate of Competency with 20 years experience in oil and gas industry. Experience as Marine Operations Supervisor, Barge Master, CSR with Sarawak Shell

Oil & Gas Production Chemistry, Chemical Engineering, Corrosion Engineer, Process Optimisation, Production Chemicals Optimisation, Corrosion/Scale Prevention/Inspection, Process and Environment Monitoring, Well testing/completion design, Process design/waste water management, Extensive field experie

I would like to work in a commercial / technical role to spearhead company growth and development with the use of strategic methodology and analytical and practical techniques.

Marine Operation Manager, Marine Superintendent , DSV Operation Manager

19 years experience in Jet Aircraft and Engine Maintenance

A Logging Analyst in the Syrian Petroleum Company. A Petrophysicist in Al Furat Petroleum Company, responsible for many fields for all petrophysical operations and formation evaluations. Petrophysics section head, Wireline logging, perforation and core analysis contract holder.

An Accredited Safety Consultant for seven (7) years of Bureau of Working Conditions / Department of labor and Employment and one of the staff of Safety Consulting firm which provide our client (Government & private firm) Safety training & education, Safety inspection & audit, accident investigation.

Well services(welltest, slickline, etc.) & routine production operations supervisor

Responsible for the operation of highly sophisticated Instruments like GC, HPLC, ICP, AAS, UV-Visible Etc., and communicating the results to other departments in time.

A very experienced (29 yrs) individual in all aspects of Logistics Management, Supply Base Management, Cargo Delievry and Major Projects support. High HSE awareness and excellent leadership skills. Worked in Drilling and Production environment throughout carreer. In employment with Major Oil Company

I possess hands on experience in developing EMS (ISO 14001) and OHSMS (OHSAS 18001) procedures in line with International best practices, performing HSE audits, leading EIA and Risk Assessment study teams, assisting in development of emergency response / contingency plans e.t.c,

Application for the post of WELDER

Over 14+ Years of Accomplished experience in automation

Workover / completion supervisor and materials mamagement

Eleven years experience in sheet metal fabrication

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 [ 46 ] 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out