Resume - i have 5 years experience as Qc Painting inspector in oil n gas plateform,module...

Misco Jobs

Resume #73040

CONTACT INFORMATION:
View contact information...

Palace / Date of Birth: Kijang, September 09Th - 1981
Religion: Moslem
Marital Status: Single
Nationality: Indonesian
Formal Education: Strata-1 Faculty of Economy Accounting
STIE Widya Wiwaha Jogjakarta 2004
Hobies: Singing and Bilyards

TRAINING & COURSES

1. Periode April 2007, Ascoatindo(Indonesia Coating Association) Certificate: 245.Ap.04.07/2007 Batam. By Mr.Gandung Rachma Nur Atman.
2. Periode April 2006, The Professional Society Of Certificate Coating Inspectors And Painting
Practitioner Ccipp Program, Qualification: Coating Inspector Level 1
No Certificate: Cci 019/Ic.I/1-5/Iv/2006 Batam
3. Periode May 2006. Basic Blasting And Coating Internal Training, Log Out And Tag Out Training Conducted At Pt.Bredero Shaw Indonesia Batam
4. Periode Feb 2005. Basic Blasting And Coating Internal Training Conducted At Pt.EUPEC Indonesia
5. Periode June 2004. Courses Of Basic English At Alfabank In Jogjakarta Courses Of Computer Major Ms. Office Application At Alfabank In Jogjakarta
6. Periode September 2003. Courses Of Computer Major Ms. Office Application At Alfabank In Jogjakarta

EDUCATION BACKGROUND

* 1999 – 2004 Economy Accounting Strata-1 Faculty of Economy Accounting STIE
Widya Wiwaha Jogjakarta 2004.
* 1999 – 1996 SMUN 01 Kijang - Bintan Timur
* 1996 – 1993 SMPN 01 Kijang - Bintan Timur
* 1993 – 1987 SDN 017 Kijang - Bintan Timur

QUALIFICATION OF THE JOB
* Fully conversant and familiar with computer program Ms. Office, Internet and Speak & write English fluently.
* Understanding with steel materials inspection, corrosions/coating inspection and field/laboratory test various coatings. Good skill, Leadership and usually work under pressure.

PROFESSIONAL EXPERIENCE

1. PT. MEGARON SEMESTA INDONESIA
(09 March 2008 – Until Now )
* Position: QC Inspector
* Scope Of Work: Off Shore Project
2. PT. PROFAB INDONESIA
(7 January2007 – 30 February 2008 )
* Position: QC Inspector
* Scope Of Work: Off Shore Project
3. PT. GERMANIC LYOD'S (GL NUSANTARA)
(5 July – 10 September 2006 in PT. UEPEC INDONESIA BINTAN ISLAND)
* Position: Inspector Coating
* Scope Of Work: Pipe Coating Service
4. PT. BREDERO SHAW INDONESIA
(15 January 2006 – 28 June 2006)
* Position: QC Inspector
* Scope Of Work: Pipe Coating Service
5. PT. UEPEC INDONESIA BINTAN ISLAND
(7 Maret 2005 – 11 January 2006)
* Position: QC Inspector
* Scope Of Work: Pipe Coating Service

REMARK PROFESSIONAL WORK EXPERIENCE:

1. PT. MEGARON SEMESTA INDONESIA – BATAM ISLAND
Date of employment: 09 March 2008 – until now
Position: QC Inspector
PROJECT:
* May 2008 VEOLIA – SBM Project
(Skids Structure and Vessel Sea water filter, Hidrocyclone)
* March – April 2008 FPSO CIDADE DE SAO MATEUS – PROSAFE Project
(Module: Skids Structure and Vessel)

2. PT. PROFAB INDONESIA – BATAM ISLAND
Date of employment: 7 January 2007 – 30 February 2008
Position: QC Inspector
PROJECT:
* November 2007 – February 2008 APL – TANKER PACIFIC Project
(Turret and Vessel)
* March 2007 – August 2007 BLUEWATER - NEXUN Project
(Tas Transverse Section Frame and Turntable)
* August 2007 – December 2007 SBM – CONOCO Project
(Bouye)
* April 2007 – June 2007 CUULONG – SU TU VANG Project
(Module: Skids Structure,Vessel Sea water filter and Hidrocyclone)
* June 2007 – July 2007 CAVJ - WOODSIDE Project
(Foriging,speacer,piston, and bottom heat)
* May 2007 – june 2007 SAIPEM Project
(Pig Receiver)

* February 2007 – March 2007 GPS Project
(Vessel)
* Feb 2007 – April 2007 SIEMENS AKPO FOR TOTALS NIGERIA ltd Project
(Module: Skids Structure and Vessel Sea water filter and Hidrocyclone)
* March 2007 – June 2007 SEMPEC INDONESIA – CODECO Project
( Deck and Module: Skids Structure and Vessel Sea water filter, Hidrocyclone)
* March 2007 – May 2007 APL Malaysia ltd – MARKS Project
(Turret)
* January 2007 – July 2007 APL Malaysia ltd – MAARY Project
(Turret, Bouye, and Mating Cone Module)

RESPONSIBLE:
* Implementation of ITP and specification FBE coating process, witness field test and laboratory test (external/internal coated) and to implementation manufacturing procedure specification for receipt of all off shore Project and dispatch of coated.
* Inspection, check, and monitoring external coated and internal coated during coating process at coating Finished.
* Prepared and reviewed document report and daily report to Manager QA / QC Representative
* Check list of Material (serial number) and Savety datasheet to cross with Data list from Product Paint: Carboline Paint, International Paint, Jotun Paint, Belzona Paint, Corrocoat Paint, Hempel Paint
* Inspection coated from holiday Test, scratch, bonding and etc. after coating process and prepare coated list
* Recheck and inspection barge condition to prepare stowage plan/stacking area for coated Project (bouye,turret, and etc) at barge

3. PT. GL-NUSANTARA JAKARTA (Third Party PGN)
Date of employment: (5 July – 10 September 2006)
Position: Inspector Coating
PROJECT: Three Layer Polyethylene (3LPE) and Internal Coating PT.PGN,tbk. (South Sumatera West Java Phase II Labuhan Maringgai - Muara Bekasi Project) Pipe size: 32" OD x 15.9mm WT - 32" OD x 19.1mm WT for Concrete Weight Coating (13772 joints) Sacrificial Anode (561 Joints) at PT. UEPEC INDONESIA – BINTAN ISLAND
RESPONSIBLE:
* Implementation of ITP and specification PGN during Internal coating and 3LPE coating process, witness field test and laboratory test (external/internal coated) and to implementation manufacturing procedure specification for receipt of bare pipe and dispatch of coated pipe.
* Inspection, check, and monitoring external coated pipes (3LPE) and internal coated pipe during coating process at coating mills.
* Prepared and reviewed document report and daily report to PGN Representative.
* Check list of pipe (serial number) to cross with pipe list from pipe mill
* Inspection coated pipes from holiday, scratch, bonding and etc. after coating process and prepare coated pipe list and port clearance for shipment delivery.
* Recheck and inspection barge condition to prepare stowage plan/stacking area for coated pipe at barge.
* Monitoring and inspection coated pipes during loading process to support shipment delivery. (Tug Boat and Barge)

4. PT.BREDERO SHAW INDONESIA – BATAM ISLAND
Date Of Employment: (15 January 2006 – 28 June 2006)
Position: QC Inspector
Object Pipe: 32" OD x 15.9mm WT - 32" OD x 19.1mm WT,
812.8mm OD x 14.3mm WT - 812.8mm OD x 15.9mm WT
28" OD x 0.469" WT - 32" OD x. 625" WT
PROJECT:
* 2006, Three Layer Polyethylene (3lpe), Internal Coating, Aspalt Enamel, Anode Instalation, And Concerete Weight Coating PT.PGN,tbk. (South Sumatera West Java Phase II Pagar Dewa - Labuhan Maringgai Project) Pipe size: 812.8mm OD x 14.3mm WT - 812.8mm OD x 15.9mm WT and 32" OD x 15.9mm WT - 32" OD x 19.1mm WT
* 2006,Three Layer Polypropylene (3lpp) And Concerete Weight Coating Pt.Saipem – Bp.Tangguh Project. Pipe size: 28" OD x 0.469" WT - 32" OD x. 625"
* 2006, Fusion Bonded Epoxy (FBE) Pt. Sumitomo Corporation (S) Pte.Ltd – Kodeco Ke30 Project
* 2006,Three Layer Polyethylene (3lpe) And Fusion Bonded Epoxy (Fbe) Pt. Amerada Hess Ujung Pangkah – Pt. Raga Perkasa Ekaguna / Pt.Pal Indonesia Project
* 2006, Three Layer Polyethylene (3lpe) Pt.Steel Pipe Industry Of Indonesia Pgn Distribusi Jawa Barat Project

5. PT. UEPEC INDONESIA – BINTAN ISLAND
Date Of Employment: (7 Maret 2005 – 11 January 2006)
Position: Qc Inspector
PROJECT:
* Three Layer Polyethylene (3LPE) and Concerete Weight Coating PT. PERTAMINA/PT. Inti Karya Persada Tekhnik (Musi Barat - Pagar Dewa Pipe Line Project). Pipe size: 28" OD x 0.469" WT - 32" OD x. 625" WT for 3LPE and Concrete Weight Coating (11476 joints)
* Fusion Bonded Epoxy (FBE) PT. CALTEX (Rumbai - Dumai Pipeline Project) Pipe size: 16" OD x 9.52mm WT - 20" OD x 12.7mm WT for Fusion Bonded Epoxy (FBE) Coating (996 joints)
* Fusion Bonded Epoxy Liquid (FBE) PT. CONOCO PHILIPS (Suban Phase II Project) Pipe Size: 8" OD x 0.344" DRL - 16" OD x 0.652" DRL for Fusion Bonded Epoxy (FBE) and SP – 8888 and Liquid Epoxy Coating (2811 Joints) 219.1 mm OD x 10.31 mm WT Bend Pipe For FBE Coating
* Three Layer Polyethylene (3LPE) and Internal Coating PT.PGN,tbk. (South Sumatera West Java Phase II Pagar Dewa - Labuhan Maringgai Project) Pipe size: 812.8mm OD x 14.3mm WT - 812.8mm OD x 15.9mm WT for 3LPE & Internal Coating (6853 joints)

RESPONSIBLE:
* Implementation of ITP and specification Project during External coating and Internal coating process, witness field test and laboratory test (external/internal coated) and to implementation manufacturing procedure specification for receipt of bare pipe and dispatch of coated pipe.

* Inspection, check, and Witness pipe during coating process at coating mills. External Coat Three Layer Polyethylene (3LPE),Fusion Bonded Epoxy (Fbe), and internal coated, Aspalt Enamel Coating, CongcretCoating pipe during coating process at coating mills.
* Prepared and reviewed document report and daily report to Project Coating Representative.
* Check list of pipe (serial number) to cross with pipe list from pipe mill.
* Inspection coated pipes from holiday Test, scratch, bonding and etc. after coating process and prepare coated pipe list and port clearance for shipment delivery.
* Recheck and inspection barge condition to prepare stowage plan/stacking area for coated pipe at barge.
* Inspection coated pipes during loading process to support shipment delivery. (Tug Boat and Barge)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5801 to 5850 of 9766)

Go to Search Parameters...

Brief Description

An enthusiastic and educated geologist willing to take up a challenging position as a petrophysicist/ Geologist. Experienced with Petrophysical, Geological and Mapping Software. Knowledge of data types and data loading methods and formation evaluation techniques.

BOILER OPERATION

Expeditor and site buyer. Currently based in Italy, I will be relocating to Australia towards the end of the year with the possibility of moving earlier in the event of an employment offer.

Languages: English & French PDMS Administrator since 1987 Experienced in MDS, PML2, Cats & Specs, Draft

Currently working as a maintenance supervisor in Sudan. Spent 13 years working on oil tankers for British Petroleum as a marine engineer.

Seeking a challenging position in the engineering field operation with an organization that provides opportunity to utilize and improve my operational, technical, management, and team work skills while enhancing professional growth.

AM Fabrication Engineer with CSWIP W/I 3.1,European Welding Inspection Practitioner, International Welding Inspector with ASNT level II in MPT,DPT,RFI,UTG having around seven years of experience in ndt/inspection of Oil&Gas Installations both Onshore/offshore.

innovative ,conscientious and hard working

looking for a doorway into oil and ind.

Engineer, Junior Drilling supervisor, Wokkover supervisor, Engineering Technician.

want to Join a progressive company which can utilize me properly.

A high achieving Masters graduate with a firm, broad knowledge of the various aspects of petroleum engineering. Seeking employment with an oil company, preferably with a reservoir engineering or production technology focus.

An Instrumentation / Electrical Project Engineer with a wide range of experience in the Oil & Gas / Civil Projects. Proven leadership, involving managing, developing and motivating teams to achieve their objectives. Able to work on own initiative and as part of team.

expertise in environmental water policy and economic background with relevant experience working. At a national and Mediterranean level I worked at the Ministry of Water and Irrigation in Jordan as an advisor and assistant to the Minister Dr Hazim El-Naser.

A Control Systems & Instrumentation Engineer with 7 years of experience in sizing, selection, engineering of field instruments and control systems including site experience of installation supervision, pre-commissioning and commissioning.

Reservoir Engineer with a strong Mechanical Engineering background plus two MS in Petroleum Engineering. Four years experience in Reservoir Engineering. Seeking a position as a Reservoir or Production Engineer oriented the development of oil and/or gas fields in a stimulation and energetic company.

I have Master's Degree in Petroleum Geology from Karach University in Dec2000.After being passed out i got internship in Pakistan oilfields ltd one of the largest operating company in Pakistan. since then i am working with BHI as senior mudlogger.

Mechanical engineer seeking junior project engineer position for a low salary in Central-Asia. Highly motivated to learn new skills.

Recent MBA graduate from Le Moyne College, Syracuse, NY and has a 4 years of experience as a civil engineer. Wants to have a career change working at petroleum/oil/gas industry and willing to relocate and travel.

A business-savvy finance professional with thorough knowledge in Financial Management. Experience in oil and gas accounting and refinery economics. Substantial knowledge in derivative instruments and accounting for options and futures. Expertise in design of profit projection simulation models.

I have 7 years experience working in oil and gas industry including 6 years in seismic processing using CGG Geovecteur software on UNIX based work stations. Besides, I also have experience working in seismic acquisition land n marine.

Merchant Marine Engineer looking for a Junior Field Engineer/Field Technology position. Holder of a Bachelor degree of Nautical Sciences with a major in Engineering. 7 years of Experience in Maintenance planning, scheduling & coordination on board ships.

Objective; to receive long term employment in the oil and gas industry, preferably in the downstream refining sector. I bring 13 years multi-faceted oil and gas experience to offer both up and downstream operations. My strongest forte is in refining operations.

Diploma in Mechanical Engineering. 10 years Experience. 7 years in UAE. Presently working as Quality Inspector in a reputed Oil field Company. (Machine shop, Fabrication & Gasket manufacturing) NDT Level -II, Quality Management System, MS office & Auto CAD.

As an Electronic Systems Engineer, with training and experience in Oil Well borehole logging processes, I believe I would be an immediate and viable asset to any team.

Interested in Full time employment as well as Student interns in the areas of Mechanical Engg/Manufacturing/Product Development/Industrial/Modeling and Design/Materials/Cardiovascular mechanics

13 years in Petrochemical Operations at Hovensa LLC Oil Refinery. (Former Hess Oil Refinery U.S Virgin Island). 230 MW Power Plant, 58 bpd Delayed Coker unit with Gas Plant, 40 bpd Crude Unit.

A Chemical Engineering degree holder, having more than 7 years of experience in off-shore oil field operations including production, maintenance and instrumentation.

6+ years of experience in Process Design and Engineering (Basic and Detailed), Operations. Pre-Commissioning in the fields of Oil & Gas, Petrochemicals, and Fertilizers etc. Experience encompasses nearly all spheres of projects e.g. Design, Development and Implementation.

Objective: Best and Sincere Contribution towards Facilitating Total Solutions for Petrochemical, Power and Process Industries by Providing Innovative, Economical and Advanced Engineering Information Technologies instead of Time Consuming, Costly Traditional Engineering

I have been a Journeyman Instrument Mechanic for eight years; I have been in the field for thirteen years. I have extensive experience working on plant maintenance, shutdowns, start-ups and commissioning. For the last six years I have been contracting myself out to various companies.

Highly enthusiastic Chemical engineering graduate with MSc IT qualification and experience gained in the process industry. Analytical, highly numerate, problem-solving and creative ability with superior interpersonal and communication skills capable of working on own initiative or as part of a team.

management experience of a wide variety of environmental projects including international HSEMS, development and implementation of environmental management systems, development and provision of audits and training courses..

ELECTRIC ENGINEER.

Best and Sincere Contribution towards Facilitating Total Solutions for Petrochemical, Power and Process Industries by Providing Innovative, Economical and Advanced Engineering Information Technologies instead of Time Consuming, Costly Traditional Engineering.

Employment history with over 15+ years oil and gas exploration experience.

AA general studies, HVAC Universal EPA Certification, Advanced Data Entry Certification, Custodial Maintenance Certification

Professional Geologist with special skills in Environmental Project Management and Petroleum Exploration

i have 5 years experience as Qc Painting inspector in oil n gas plateform,module, etc and Pipe Coating Service. and i m looking job in asia as Qc painting inspector.

Senior piping designer

worked as an operation engg, has a very good operational knowledge, result oriented, belives in doing work with available resources.

Structural engineer with almost 3 years working experience in the field of oil and gas industry,

HSE Manager

Instrument & DCS Specifications datasheets, I/O list preparation, JB,Cable schedule, Logic Diagrams, Wiring Diagrams, Cable and Tray routing, hook-up Drawings, Installation Standards, MTO, Technical Procurement assistance, DCS Detailed Engineering, Project, construction and commissioning activitie

I am a degree holder in Mechanical engineering. Also having sound knowledge in PDS, Microstation. Presently working as a Lead Engineering Manager in Plant Layout and Piping Discipline.

Project Planning Engineer

Instrumentation Engineer

3rd Year Student in B.s.c Geology finishing at June (final Year)

Undergone training on DCS (CENTUM 3000) and Prosafe Safety PLC on YOKOGAWA system at YOKOGAWA INDIA LIMITED, Bangalore.

Piping / Structural Draftsman

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 [ 117 ] 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out