Resume - I am skilled in the planning, scheduling and initiating tasks for production, re...

Misco Jobs

Resume #73041

CONTACT INFORMATION:
View contact information...

Objective A manufacturing/quality leader offering over 20 years of progressive and diversified experience in Lean Manufacturing concepts and implementation with the focus on continuously improving manufacturing and maintenance processes. Seeking a career challenge where experience will enable me to contribute to a company's objective.

Experience May 2007 – Current NAMPAC Corp. Cleveland, OH
Maintenance Manager

* Lean team member to reduce inventory and meet customer requirements with higher performance.
* 5S system leader in maintenance to reduce performance downtime at facility.
* Responsible for OEE performance for entire plant.
* MP2 program administrator for the plant.
* Responsible for SAP requisitions and purchase orders.
* Scheduling of daily, weekly, monthly, quarterly, bi-annual and annual preventive maintenance.
* Daily job assignments for all maintenance personnel.
* Responsible for the ordering of materials to properly run the facility.
* Responsible for the operation and troubleshooting of the water treatment system.
* Scheduling of outside contractors and inspections for equipment to ensure local and state regulations were met.
* Main contact for vendors and outside contractors.
* Maintain safety system of facility.
* Maintain and balance employee hours for company payroll.

August 1987 – May 2007 Willow Hill Industries Willoughby, OH
Plant Production and Maintenance Manager

* Scheduling of all plant production.
* Scheduling of preventive and reactive maintenance.
* Scheduling of shipments to customers.
* Daily job assignments for all hourly personnel.
* Communicating daily with customers to verify requirements.
* Responsible for the ordering of materials to properly run the facility.
* Responsible for the operation and troubleshooting of the waste treatment system.
* Responsible for the operation and troubleshooting of the phosphate coating line.
* Scheduling of outside source inspections for equipment to ensure OSHA compliance.
* Maintain safety system of facility.
* Maintain and balance daily labor and employee hours for company payroll.
* Main contact for vendors and outside contractors.

September 1983 – September 1987 U.S Marine Corps MCB Camp Lejuene North Carolina
Corrections Specialist

Accomplishments
* Created a Min/Max Lean Manufacturing system for all facility repair and spare parts.
* Established a 5S system in facility that decreased spare parts inventory by over 50%.
* Lean manufacturing team member responsible for an 80K reduction in W.I.P. and a 50% reduction in finished goods buffers.
* Wastewater treatment center, which reduced the water usage of the plant by more than 50%.
* New Phosphate coating line that doubled production.
* Many areas of continuous improvement including in process and personnel.
* Numerous cost saving ideas that reduced operating expenses.
* Other accomplishments upon request.

Education Willoughby South High Willoughby, OH
* 1983 High School Graduate
United States Marine Corps
* Corrections Specialist School Lackland AFB San Antonio, Texas

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9101 to 9150 of 9777)

Go to Search Parameters...

Brief Description

Time served mechanical fitter - city and guilds

25 yrs Heavy diesel mechanic in Construction and Pipeline

20 + Years Experienced Heavy Equipment Operator / Haul-Truck Driver Supervisor to Relocate Anywhere. I desire to work for a well established yet growing company.

I am a young energetic Mechanical Engineer with hands-on experience in Upstream Oil and Gas industries and Masters degree in Project Management from National University of Singapore. I came to Singapore to gain the best of knowledge of the industry and the field exposure so as to increase my profess

Five (5) years of electrical engineering work experience of which engaged in oil, gas, and water construction and rehabilitation. Electrical, Cathodic Protection and Instrumentation design verification and implementation of work procedure. To assure that all electrical activities were done in accord

B-Tech (Mechanical Engineering) .Presently working as Scientific Officer in Nuclear Power Corporation of India Limited (Department of Atomic Energy).having experiece in 1.Power production, planning and control of process carried out in the plant. and 2 commissioning of systems

Experience includes Phase I & II environmental site assessments, environmental impact statement, waste remediation, solid & municipal waste treatment and waste management, groundwater treatment plants O&M, lead and asbestos abatement, noise & vibration control, and building demolition.

A result oriented professional with over 15 years of cross functional experience in Sales & Marketing, Business Development, Techno-Commercial operations and handling timely Project Supplies

Strong knowledge in electronics industries PCB design, assembling, trouble shooting

Skilled assistant driller can assist using safe relavent techniques to drill and avoid dangerous methods.

Electrical Engineering, Distribution Planning and Engineering, Future Planning for Electrical Load Growth, Study of 11 / 6.6 kV Network for New Projects, Modification of existing 11 / 6.6 kV network to increase reliability

Bachelor’s Degree in Mining Engineering, Faculty: Petroleum Geology and Geophysics, and Chicago Oakton Community College Faculty: Computer Science.

Accounts payables, data entry, buyer - willing to learn anything new

Sr. First Aid Instructor, and Safety Practitioner with knowledge and experience in oilwell drlling operation and safety management including H2S

Experience in Project management w.r.t Electrical, Electronics, IT and Telecommunications, Mechanical equipments, Oil & Gas, and Civil construction equipments, Automotive Industries, Civil Constructions, Project Management, IT / BPO Services, Food and chemical Industries and service sectors

Professional mechanical/industrial engineer seeking a project engineering managmenet or consulting position. Offer extensive engineering and management skills in the industry.

Field sales representative collection/ credit investigation drafting edge

I am a graduate mechanical engineer with close to 16 years experience in the engineering, maintenance, and project engineering fields; large power stations and also in the oil & gas field. Extensive Maximo computorised maintenance management system (CMMS) experience and worked on SAP for 3 years.

Seven years experienced within the Oil & Gas Industry with Multinational Companies engaged in the EPC of Refineries, Petrochemical and Chemical Process Plants, Gas Plants, Well - Heads, Shutdown piping, Cross-Country and Mountain Pipeline projects, in the specific areas of Commissioning Certificati

Competent in Microsoft office 2000 , Turbo C++ , Pspice, Mathcad, Derive, Converge, MathLab, Advanced Design System for Wireless and Microwave, Internet, Fluent in Arabic, English, and French, Occupational safety rules, Marketing and sales skills in the moroccan market

5 years experiences in Project Controls Engineer specifically with Cost & Planning engineering on major projects valuing approximately $4.5 Billion. I have experience in all phases of engineering, procurement, construction and have been involved in a wide variety of different contract PMC & EPC

Welding Inspector Certified CSWIP 3.1 with Certificate No 21379. TWI, Granta Park, great Abington, Cambridge, CBI 6 AL, United Kingdom.

I have acquired many important skills while contracted to Pacific Gas and Electric Co. I was very blessed to gain great knowledge of the entire system and made my number one daily priority safety.

ULLS-G, TAMMS, maintenance supervisor, mechanic, Bradley Vehicle, light track, wheeled vehicle, AOAP, ASE, MVAC, maintenance Manager, QA/QC,

I am a talented results-driven supervisor with versatile, cross-functional experience in team implementation, training, skills enhancement, coaching, mentoring and career progression seeking a career change in the oil and gas industry.

Design, Engineering, & Execution of Emergency Shutdown system (ESD)

londery worker ,waiter & data feeding

Certified Project Manager: MS Project Proficient 3 Years - Conception and Maintenance; Risks identify, log, track mitigation, etc; Issue resolution/ day to day PM

Principal & Project Engineer experienced working Oil & Gas and Industrial electrical projects.

Municipality Of Saanich- Solid Waste Services/ General Labour

Pro Engineer 2+ years experience

Oracle Functional Consultant with over 9 years of experience in the Finance domain

Global Business Development Manager

I am skilled in the planning, scheduling and initiating tasks for production, repair, and preventive maintenance. Lean manufacturing skills including inventory of finished goods, spare parts, and raw materials.

Managementskills NQF level 6,NQF level 4, operationalskills NQF level6,Facilitationskills,trainingskills,computerskills

Strategic Commercial Management, Supply Chain and Project professional

I have an ability to grasp new concepts quickly and clearly to apply my knowledge and experience for tackling tricky situations.

Visual C++, C#, Visual Basic, Java, J#, Pascal, PROLOG Tools:1.Professional: Microsoft Visual Studio.Net, C builder, Java Visual Age, SQL Server 2000 2.User level: Microsoft Office, Visual Studio, Web Studio, Oracle 9i, Scripting and markup languages: HTML, XML, XSL, VBScript

Senior administrative skills, leadership, international recruitment, training, generalist HR, education, liaison,

During my studies I worked in cooperation with the Egyptain Geological Survey in the Eastern and Western Desert of Egypt and in another project together with the University of El Jadida, Morocco. Main subjects were mapping and sampling as well as geomagnetic. Working experience is shown in my CV.

I WAS DONE B=TECH IN MECHANICAL ENGG WITH 72% MARKS & ALSO DONE DIPLOMA IN MECHANICA;L ENGG & I HAVE ALSO THREE YEAR WORK EXPERIENCE

Tender Administrator

MBA in marketing with 4 yrs experience

Enthusiastic recent graduate with a BS in Geology looking for a full time entry-level position where I can utilize my knowledge of geology and recently learned skills. Graduated with Departmental Honors and a 3.39 GPA in geology courses.

1 year Wellsite Geologist/Mudlogger; 7 months experienced Varian Gas Chromatography; 2.5 years experienced Staff & Project Hydrogeologist and Environmental Field Technician

hands on experience in hardware and software design, circuit and PCB design, microcontroller circuit and firmware design

Automation Engineer

Auto CAD Operator & 1 Year Working Experience in Auto Plant (specialized software of piping)

! have 23 years in the oil and gas industry with the last 10 in the pipeline control room. Handling 10000 miles of pipeline reciepts and deliveries.

I have worked in the mining industry for the last 15 years. I have performed several duties in the operating and maintenance field. As well as supervised crews and trained new employees.

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 [ 183 ] 184 185 186 187 188 189 190 191 192 193 194 195 196 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out