Resume - A keen HSE professional with NEBOSH (U.K) International General Certificate & IO...

Misco Jobs

Resume #73079

CONTACT INFORMATION:
View contact information...

Profession: HSE - Practitioner

INTRODUCTION:

A keen HSE professional with NEBOSH (U.K) International General Certificate & IOSH-Managing Safely course with Mechanical Engineering background. The experience profile ranges from: Ensuring internationally accepted Best HSE practices across Process Plants, Construction Industry, Oil & Gas EPC Projects. Ability to interact with multi-cultural clients and to win positives for the organization I serve. Keen to learn from the mistakes and eager to enhance company's HSE profile by adding value in advising the top management fearlessly regarding the good and bad practices in the field of HSE and address the behaviour based issues in a matured & humanistic approach. Ensuring & enhancing coordination between various agencies in matters effecting the Health, Safety & Environment of all stake-holders.

Adept at construction site inspections & audits to highlight the positives and the improvement points. Enhancing company's HSE performance by ensuring appropriate training to targeted audiences in a systematic and planned training matrix. To take the HSE field of activity as a movement to further the interests of the businesses of the organization. Identifying the gaps for incident occurences and resolving them by taking appropriate people into the discussions by ensuring suitable human-dynamics are in place.

Keen to share my work experience with a reputed best practices company and enhance my knowledge base and participate in the organization's HSE movement to raise HSE performance to next higher level.

CAREER OVERVIEW:

A total of fourteen ( 14 ) years' work exposure in the field of Environmental, Health & Safety position in, Civil construction projects, High-rise buildings, Airport Hangars, Piping, Chemical plants, Hazardous Chemical handling - covering all related scope of works. Experienced in ISO 14001 & OHSAS 18001 System implementation, auditing works.

A total of seven (7) years' Mechanical Maintenance & Safety Work experience in chemical process industries handling all related activities such as: Implementation of Safe Work Procedures, Permit to Work Systems, Imparting Safety Education, Maintenance of machines, preventive & predictive maintenance functions, Maintenance of Chlorine Storage tanks and Bleach Liquor preparation plant, Installation of chemical process pumps and related equipment & commissioning. Implementation of ISO 9001 and ISO 14001 quality & environmental management Systems respectively.

PROFESSIONAL QUALIFICATION:

* Bachelors Degree in Mechanical Engineering
Andhra University, India.

* Diploma in Industrial Safety

* IOSH - U.K Certified Course on Managing Safely
Euro Link Safety Services, Dubai, U.A.

* System Exposure: MS Word, Excel, PowerPoint

*NEBOSH-International General Certificate In Occupational Health and Safety from CHSS,U.K - Dubai Chapter.

EMPLOYMENT HISTORY:

PUNJ LLOYD LIMITED, Al Ghaith Tower, P.O.Box 28907, Hamdan Street, ABU DHABI, U.A.E
PERIOD: DEC'07 TO TILL DATE
DESIGNATION: REGIONAL HEAD-SAFETY (ADDITIONAL GENERAL MANAGER - HSE)

Responsible for the HSE performance across the company's middle-east operations - which include: UAE, Oman, Qatar, Saudi-Arabia & Yemen. The nature of work includes consultation with major clientele and implementation of stringent safety measures for our services - which include: Laying of Oil & Gas Pipe Lines, Construction of Plants & Erection, Refineries & Infrastructure Facilities. The responsibility includes, among other things - Coordinating between various agencies, Training of personnel, Legal Compliance to various regulations, Implementation of our company's Health, Safety and Environment Management System.

Presently the challenges on hand include among others:

1. Developing strategic objectives & targets
2. Measure HSE-Performance
3. Elaborating the roles & responsibilities
4. Competency assessment and training needs
5. Effective contractor management
6. Identify, evaluate & implement risk control measures
7. Develop & execute annual HSE-plans.
8. Coordinating between various sites across the middle-east operations.

ESSAR CONSTRUCTIONS (INDIA) LIMITED, Hazira, Dist Surat, Gujarat State, India.
PERIOD: MAY 2006 To NOV 2007
DESIGNATION: HEAD-SAFETY (Joint General Manager - HSE)
PROJECT / NATURE OF WORK: Managing Safety for the Steel Plant expansion Projects.

Managing safety on a construction site comprising project expansion works such as: Construction of Essar Steel Hazira Ltd of 3.9 MMTPA Plant, Capacity Expansion of 4.6 MTPA, Construction of a new Plate Mill, Expansion of Cold Rolling Mill. The other projects on hand include construction of 155 MW Power Plant, 200 MW Power Plant and construction of 140 MW Power Plant. Implementation of HSE Program, dealing with contractors, meeting to client safety requirements, Conducting site audits, facilitating induction and refresher sessions for department incharges and frontline engineers, conducting safety committee meetings and highlighting safety compliance needs at various forums and interacting with factory inspectorate, conducting custom designed training programs to contractor labor, Supervisory staff and engineering wing. The manpower as on date is touching an approximate figure of 7500 - contractor personnel forming the major work force.

Major Achievement: 3.4 Million Safe Man-hours Without a Lost Time Injury at Hazira site.

ETA - ASCON Group of Companies, P.O.Box:5239, Dubai, UAE
PERIOD: JUNE 2005 To MARCH 2006
DESIGNATION: Senior Safety Engineer
PROJECT / NATURE OF WORK: Conducting Site safety audits & Safety Training Programmes

Preparation of training modules on various Construction Safety related activities, Conducting Site based training, Safety Inspections, Safety Audits, Analysis of Accidents - Preparation of Statistical Data and implementing Control Measures by advising the Site Management. Also preparation of Emergency Evacuation Procedures. Preparation of Risk Assessments, Environmental Aspect Impact analysis in preparation for achievement of OHSAS 18001 & ISO 14001 management Systems.

Knowledge of U.A.E HSE Legislation:
Dubai Municipality Code of Construction Safety Practices, Federal Law No 8, Local Order 61 of 1991 on Environmental Protection Regulation for the Emirate of Dubai. Ability to interpret OSHA Guidelines and also HSE Guidelines of U.K.

Knowledge of Relevant Indian HSE Legislation:
Laws & Regulations relating to HSE in India, Factories Act, National Policy on Safety, Health & Environment at work place, Environment Aspect Impact Analysis, Risk Assessments, Hazardous Waste Management & Corporate Social Responsibility.

NATIONAL WHEEL J & P LLC, P.O.BOX: 4624, DUBAI, U.A.E:
PERIOD: MARCH 2004 to APRIL 2005
DESIGNATION: HSE Officer
PROJECT: Dubai International Airport - Air side Hangars
CLIENT: EMIRATES ENGINEERING CENTRE, CONSULTANT: ADPi

Assisting the management in implementing Safety compliance requirements from client perspective, carrying out Loss prevention activities. Advising the personnel regarding safe work practices. Preparation of training modules for Staff & workmen and conducting training sessions. Preparation of risk assessments and communicating to the management the remedial measures. Identifying the hazards on the construction site & highlighting the same in safety meetings to prevent accidents.

Participated as a lead-member in the successful Certification & Implementation of ISO: 14001 & OHSAS 18001 management systems for the airport hangars site.

PAPER PRODUCTION FACILITIES / INDUSTRIES:
(MURLI AGRO PRODUCTS-NAGPUR; CENTRAL PULP MILLS-F.SONGADH, GWALIOR RAYONS-MAVOOR KERALA; BALLARPUR INDUSTRIES LIMITED-JEYPORE ORISSA)
PERIOD: JUNE 1994 to MARCH 2004
DESIGNATION: MANAGER - Mechanical & Safety Department
PROJECTS: Construction of Plants, Equipment Erection, Plant Retrofitting - Mainly Expansion Project
JOB PROFILE:

* Development of Project HSE Plan
* Developing heavy-lift plans and discussing with site execution personnel.
* Implementing Tool-box sessions
* Discussing incidents with site personnel
* Conducting regular site inspections to guide and correct the workforce to eliminate conditions and practices that are hazardous to Health, Safety and Environmental protection.
* Identifying the work place hazards and control measures with the help of Risk Assessment, Environmental Impact Assessment tools.
* Identifying training needs and delivering the HSE essentials.
* Development and implementation of work permit system
* Developing agenda for management safety meeting and addressing the issues
* Developing and ensuring appropriate safety communication across all levels.
* Job safety analysis and Risk assessment
* Safety performance evaluation of sub-contractor, suppliers.
* Conducting HSE audits and evaluating the improvement criteria and apprising the senior management.
* Supervising equipment erection to the highest safety standards

J.K.PAPER LIMITED, Jaykaypur-765017, District Rayagada, Orissa - India
PERIOD: MAY 1987 to JUNE 1994
DESIGNATIONS HELD: Executive Trainee, Mechanical Engineer & Senior Mechanical Engineer.
PROJECTS: Mechanical Maintenance of Continuous Process Plant Equipment.

* Plant erection and commissioning works
* Scheduled maintenance works of process plant equipment.
* Managing contractors
* Inspection of Chlorine storage tanks and hydraulic pressure testing
* Participating in Chlorine plant emergency mock drills.
* Installation of pumps, agitators and other process equipment
* Ensuring scheduled maintenance activities.
* Import substitution and inventory management
* Active participation in implementation of ISO 9001 & ISO 14001 & TQM.

HINDUSTAN AERONAUTICS LIMITED, PO-Sunabeda - 763002, Orissa - India
PERIOD: DECEMBER 1986 to MAY 1987
DESIGNATION HELD: Graduate Apprentice Trainee

Observation of various activities in engine shop, assembly section, blade shop, foundry & forge shops & machine shops. Maintaining of daily records and reporting to Senior Training Manager.

KEY SKILLS & COMPETENCIES:

* Ensure implementation of defined, measurable HSE targets.
* Analyze accidents; identify trends, vulnerabilities that may be avoided by preventive techniques and procedures.
* Implementing and maintaining best practice Environmental, Health & Safety (EHS) management systems.
* Undertake appropriate reviews and evaluations to measure HSE performance against defined standards and to ensure compliance with the policy.
* Openly report HSE performance (good and bad).
* Providing expertise in the area of preventive safety and safety management.
* Hold all levels of line management accountable for HSE issues and for the development of positive attitudes in themselves and those whom they supervise.
* Contractor safety management.
* Provide advice and assistance on safety and fire aspects to plant departments.
* Provide HSE-Training to all management staff, Tradesmen - covering all related activities such as: Scaffoldings, Fire-Fighting, Behavior based Safety, Emergency Preparedness, Role of Site Engineers in Safety Implementation, Construction Safety Management, OHSAS 18001 implementation, Risk-Assessment & Pro-active safety etc:
* Knowledge of OSHA-regulations on scaffoldings and scaffold check points.
* Laying stress on People Based Safety ( Behavior Based Safety )
* To generate risk assessments & environmental aspects & impacts and advise remedial measures.
* Ensuring documentation and record management as per statutory and corporate guidelines.
* Progressively reduce emissions, effluents and wastes and improve efficient use of natural resources and energy during design and construction.
* Interacting with various project management groups for incorporating EHS principles at the project concept stage.
* Knowledge of implementation of the Dubai municipality code of construction safety practices under Local Order 61 / 1991 (in UAE), where applicable.
* Implementation of Environmental Protection Safety Series Technical Guidelines of U.A.E.
* Manage all risks to a level which is "As Low As Reasonably Practicable" (ALARP)
* Strive to protect and promote the health of all employees and contractors.

TRAINING / SEMINARS ATTENDED:

1. Integrated Fire Fighting Course.
J.K.Paper Ltd, Orissa, India

2. Construction Safety
Ballarpur Industries Limited, Orissa-India

3. Accident Investigation - Models.
J.K.Paper Ltd, Gujarat, India

4. Safety Objectives - Employee Motivational Factors.
Ballarpur Industries Limited, Orissa-India

5. Quality Circles: Formation & Development.
J.K.Paper Ltd, Orissa, India.

6. ISO 9001 Quality Management Systems.
J.K.Paper Ltd, Orissa, India.
7. Total Productivity Management.
J.K.Paper ltd, Orissa, India.

8. Hazard identification: Risk assessments.
ETA-ASCON, Dubai, UAE

9. Safety Implementation & Behavioral Aspects.
ETA-ASCON, Dubai, UAE

10. Internal Auditor's Course - OHSAS 18001
DNV - India Chapter.

12. Basic First Aid
Euro link Safety Services, Dubai, UAE

13 Scaffold Inspector / Scaffold Trainer's Course ( Conducted in Dubai, UAE )
Agency - Scaffolding Training Institute, Houston, USA

14 Construction Safety Workshop - Conducted By National Safety Council of India at Mumbai.

REFERANCES:

* K.Suresh Kumar, Executive Director, Enmass - Andritz Pvt ltd, Fourth Floor, Guna Annexe, 443 Anna Salai, Chennai, India.
* Peter Steer, HSE Branch Manager for UAE, Qatar & Saudi Arabia: National Wheel J&P, PO.BOX: 4624, Dubai, U.A.E
* Vincent Andrews, QHSE Manager, National Wheel J&P, PO.BOX: 4624, Dubai, UAE
* M.Kamarajan, General Manager ( Safety & Training ), ETA-ASCON, PO.Box: 5239, Dubai, U.A.E.
* D.A.Subramanian, Senior Vice-President (Projects), Essar Constructions (India) Limited, P.O Hazira, Dist - Surat, Gujarat State, India
* Ramachandran Kannan, General Manager (Contracts), Essar Constructions (India) Limited, P.O. Hazira, Dist - Surat, Gujarat State, India.
* C.P.Doshi, General Manager (Fire & Safety), Essar Steel Limited, P.O-Hazira, Dist Surat, Gujarat State, India.

PERSONAL DETAILS:

Nationality: Indian
Date of Birth: 18 / 08 / 1964
Marital Status: Married
State of domicile: Andhra Pradesh, India
Driving License: Valid For India

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2101 to 2150 of 9777)

Go to Search Parameters...

Brief Description

Over twenty years in plants, and pipeline construction, Inspection and supervision, including several overseas assignments.

Quantity Surveyor/Estimator (Mechanical)

LNG/Gas plant operator with wide experienced in the Gas processing industry. Able to work on its own initiative and or as part of a team. Commands a proven leadership skill in motivating the teams to achieve their objective. Exercise good analytical and problem solving skills, Experienced in the com

Instrumentation Engineer with 15 years of experience in maintenance, teaching and construction

Field Well Completions, Slickline Operations, Safety

Sr. Structural Engineer with 8+ Yr of Experience in the field of oil & gas.

I have 10 year experience on Instrument (5 year in Oil&Gas Industry as Instrument Engineer and 5 year in Sales & Marketing Engineer (process instrument)

I have 20+ yrs experience in Materials & Inventory Management

- Good at English and drilling software.

16 years of experience in the field of Industrial Chemical Cleaning, Water treatment, Chemical handling, Equipment erection and demolition either Business development or project Implementation. I ca

Prepare plot plan and isometric drawings. Prepare plan drawings by manual drafting and by AutoCad, Microstation and Plant Design System (PDS). Material take-off and back checking. Incorporate changes and revisions on P&ID, communicates and interfaces with other engineering disciplines.

Chief Engineer qualification (any horsepower)

Graduate engineer, very dynamic lookng for drilling career in oil and gas Exploraration.

Having 17 years of professional experience in the field of Instrumentation and having involvement in Project Management, Detailed engineering, Project Execution – EPC, Commissioning, Completion and Hand over of the projects in the field of Oil & Gas – On shore, Petrochemical, Power and Process pla

Extensive experience in electrical mechanical completion, pre-commissioning, commissioning and operation of drilling rigs, FPSO’s, power plants & other projects including oil & gas in Africa, Asia, Australia, Middle East and South America.

Chemical Engr w/24 years Well Engineering experience

A keen HSE professional with NEBOSH (U.K) International General Certificate & IOSH-Managing Safely course with Mechanical Engineering background. The experience profile ranges from: Ensuring internationally accepted Best HSE practices across Process Plants, Construction Industry, Oil & Gas EPC Proje

•M.Sc. in Geology with specialization in Petroleum Geology and Biostratigraphy. •Working as a Geological Consultant and providing Wellsite Geological Services to the clients within Canada and overseas.

Marine & Offshore Mariner with broad shore management, command and offshore experience. An onshore fleet manager & offshore project mariner, superintendent and consultant. A commercially orientated, team builder and leader who enjoys overcoming challenges and achieving goals.

20-years experience in the oil exploration industry (12-years in the field and 8-years in the office). Present position as Project Coordinator for Baker Hughes INTEQ. IWCF Well Control Supervisor Level (Surface BOP) and LRQA Internal QMS Auditor. BSc. Ongoing MSc in Petroleum Engineering.

16 years of Piping & Pipelines Project Management/Project Execution experience in the Industries like Refineries, Hydrocarbon, Petrochemical and Oil&Gas(Cross Country Pipelines, Booster Pump stations, Oil Station, Gas Station, Up-Stream flow Lines).

Consultant geologist with close to 10 years experience in mudlogging, wellsite geology, operations geology, sales and software support and training. Majority of my career has been in the UK and Norway with one year spent in Houston, Texas. I expect to have a visa to work in Canada by June 2006.

BS in Petroleum Engineering, 17 years experience in supervision drilling offshore and onshore deviated wells. Knowledge of advanced drilling engineering techniques and testing. Team leader, fluency in English language, both verbal and written.

I have diploma with 20 years experience in construction/maintenance. 10 years in oil industries maintenance, also witness commissioning and start up of new installations in the refinery. Hands on experience in 33/11/3.3kv/440v systems.Available in one month time notice period.

Specializing in ICT/SCADA planning Proven Technical & Management Expertise with 14 years Experience overseas-Kuwait and Japan.

To apply my skills and training as a Heavy Duty Mechanic. I am a forth period apprentice and have experience with the repair and servicing of hydraulics, gaseous compression systems. And fluid pumping systems, coil tubing units, diesel engine repairs, and tractor/trailer repairs.

Safety Officer + 14 years experience

See resume

World Class HSE professional with over 20 years experience within the oil and gas arena. Outstanding change / process management knowledge coupled with highly capable influencing skills.

Resume for Project engineer position

Expert INSTRUMENTATION , SCADA, TELECOM , DCS OR SAP / ERP , DESIGN , ENGINEERING , PROJECT MANAGEMENT , OPERATION AND MAINTENANCE , TECHNICAL SERVICES , ISO’S ETC

Industrial engineer, ample experience in catalytic cracking technology and liquefied natural gas, seeks position to apply knowledge acquired as researcher over past four years. Having lived in Latin America and Western Europe, have developed effective multi-cultural skills.

18 years of experiance in handling L.T and H.T motors in power and steam plant

Sr Drilling Engineer, Night Drilling Supervisor, Contracts Engineer, Trainer, Operations Planner

Working about 9 years experience from non-executive to executive level, with more than 7 years in oil and gas industry, I am seeking challenging position in Contract or Procurement Division. Desire professional work environment with strong work ethic, attention to detail and opportunity to growth.

Project Manager with 9 yrs experience PLC,DCS,SCADA based Industrial Automation and Power Projects

I have 9 years of subtstantial experience in piping design.

Field/Control Room Operator

EEng, MBA and a partial (ongoing) Master in GISc. 16 years designing, developing and implementing GIS. Strong experience on MapInfo / MapBasic development, and on several MapInfo products and other GIS and computer languages. Also experienced in Project Management, QA and as Technical Instructor

Mechanical engg - experienced in overhauling/maintenence of diesel engines(marine & Indust),pumps,compressors and all type of equipments.

Chemical engineer with over eight years experience in an oil refinery. Utilize exemplary leadership, time-management, critical thinking/analysis, problem resolution, written/verbal communication and human resources management skills to plan and schedule operational, production and dispatch facility

• Using STAAD and AUTOCAD for Design and Detailing of Buildings and Civil Engineering Structures. Design and construction of pipeline, building and civil engineering structures, Pipeline integrity assessment and asset management , ISO 9001:2000 Qulaity Management System lead Auditor ,

Sr. Drilling & Completion Consultant

Instrument Designer/6 years of experience in Instrumentation Engineering & Construction Design

Installation, Wiring, Loop checking, Calibration commissioning of new electrical instrument and project

+12y of experience in the oil industry, especially onshore& offshore oil drilling service which has worked in the Senior Electrical engineer in more than two company to the position of Assistant Director of maintenance

Petrophysicist (Senior Geoscientist) with almost 7 years experience, Skills: Log Analysis and interpretation (Cased Hole/Open Hole) Integrated core and log data analysis, petrophysical moddeling, reserves evaluation, base knowledge of seismic interpretaion

marine, Industrial Journeyman Electrician

I have over 10 years experience out of which has solid 7 years of experience both as a Project Leader and a Team Leader and is has excellent understanding of project life cycle, quality systems, data migration, risk management, software testing, data modeling and developing specification

I M WORKING AS OPERATOR SINCE IN PETROCHEMICAL FIELD SINCE 15 YRS.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 [ 43 ] 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out